Gps Tracker Tk300
Gps Tracker Tk300
Gps Tracker Tk300
TK300 Manual
Preface
Thank you for purchasing the TK300.This manual shows how to operate the device smoothly and correctly. Make sure to read this manual
carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any
change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.
Content:
1. Summary
2. Applications
3. Man Unit
4. Accessory
5. Specifications
6. Preparation before Use
7. Authorization
8. Change the password
9. Set APN
Location
Dial the tracker number to locate
Real-time locate on network
Replay History Navigation
Movement Alert
Free Google Global Positioning
10. Set IP address and port
11. Voice Surveillance
12. SOS button
13. Remote turn on/off
14. Low battery alert
15. Indicator Lights
16. Command set
17. FAQ
18. Cautions
一 Summary
Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet.
Satellites GSM\GPRS
1
GPS TRACKER TK300
二 Applications
三 Main Unit
7
2 1
6
3 4
四,Accessory
Main Assembled Magnet Waterproof
Data Wire Battery CD Manual
Standard Unit Charger Cover Bag
五,Specifications
Content Specs Content Specs
Dim 53mmx38mmx15mm Time to first fix Cold status 45s Hot status 1s
Weight 38g Wall charger 110-220V input 5V output
Network GSM/GPRS Car Charger 12-48V input 5V output
Band 850/1900Mhz or900/1800Mhz External battery 26000mAh
GPS chip Switzerland u-blox AG Battery varying voltage 3.7V 650mAh
Li-ion battery
GSM/GPRS Module TK4100 Standby 5-60Days-
GPS sensitivity -159dBm Storage Temp -40°Cto+85°C
GPS accuracy 2m Operation Temp -20°Cto+55°C
2
GPS TRACKER TK300
use)
2, ,press“
Put the tracker outdoor(it couldn’t receive GPRS signal indoor) ”to turn on the unit.
3, Check 4 red GPS indictor light, keep flashing means the unit has received the signals; otherwise it will keep flashing 2 seconds every
1 second.
4, Check 5 green GSM indictor light, keep flashing 3 seconds every 1 second means the unit has received the signal; otherwise it will
keep flashing 2 seconds every 1 second.
5, Prepare 1 or 3 phone number as the governor of the tracker when the indictor is normal.
七,Authorization
There are only 3 numbers able to be authorized as the governor, the first number will be the default number when sending SOS message,
the other 2 numbers are optional.
Send“W******,003#” to set up a authorized number when receiving “Set No.* sos number(**********) ok”. In the reply, the first *
means the serial-number, you can totally set 3 authorized numbers. And the * in brackets means the authorized number.
Delete authorized number
Send “W******,990#” to the unit, and 3 authorized numbers will be deleted together when received “Initial phone number ok”
十,Location(Chinese address)
Open the website http://www.trackbox.com.cn.
You should register when you first land. Pls. make sure the supplier has been added in. Input 000000 if you don’t change the default
password of the unit, or it will not be verified.
3
GPS TRACKER TK300
1,Dial the tracker number to locate
Dial the tracker by authorized number, hang up automatically
after connect, and will receive the location information about 1
minute later (pictured).
(1)Time of locating
(3)dump energy
4
GPS TRACKER TK300
shows in red locus, start from point “A” and end in “Z”. The blue point will move on the route in chronological order.
Cautions: Waiting time might be a little longer if the inquiry period is too long. Pls. be patient!
4,Movement Alert
Log on the system and make sure the latitude and longitude of the tracker. Set the move radius of the unit. The radius can only be 30、50、100、
200、300、500、1000、2000M. it will send alert message to the authorized number when out of range.
22.578617,113.882790
Users can change IP and port accordingly if needed. Refer to “Command set”
十二,Voice Surveillance
Send “W******,030#”,to the unit and it will reply ” Start monitor” and switch to “monitor” mode,In this mode the other two authorized
numbers don’t work. When these two numbers call in, it will send “Phone *(***********) is monitoring”
The tracker restores location automatically after monitor. If the user don’t monitor after sending the command, it will always await till
restart the tracker.
十三,SOS Button:
Press the SOS button for 2 seconds, it will send SOS message to the first authorized number as below:
Help!
Time:09-10-26 08:29
GPS:03 22
Batt:50%
http://www.trackbox.cn/showpos.aspx?ID=090383905&Lat=22.654878&Long=114.049638
Press the button more than 2 seconds; it will call all the 3 authorized numbers for 3 times till no answer.
5
GPS TRACKER TK300
Send “W******,007,1#” to turn off the unit, and send “W******,007,0#” to turn off it. This command can help you save energy when
the tracker doesn’t need to work. But this can only work when the unit is on.
The unit will send message to the first authorized number as below when it is in low power.
十六,Indictor Light
There are 2 indictor lights: one is the green GSM indictor (near the USB jack), the other one is red GPRS indictor.
It will keep flashing when GPS locates successfully, otherwise it will flash every 1 second.
It will keep flashing for 3 seconds every 0.5 second when GSM network works; or it will keep flashing for only 1 second every 0.5 second. And
it will flash every 0.1 second when sending message or making a call.
The lights will turn off after working for 10 minutes for saving power, then it works 10 minutes every 2 hours.
6
GPS TRACKER TK300
Low battery alert W******,004,X# X (digital only)
=0 cancel low battery alert; >0 alert while battery is under 3.6V
Unit reply :SET (004,X) OK
十八,FAQ
7
GPS TRACKER TK300
The unit couldn’t hung up 1, Check if the number is authorized. 1, Use an authorized number.
automatically when getting 2, Check if it is in “monitor” mode 2, It will restore location automatically
through in “monitor” mode, or restart the
unit.
The unit hung up automatically Check if the reply function is off. Send “W******,008,1#”to turn on reply
without message reply when function
getting through
十九,Cautions