Manual Gps Track gt001
Manual Gps Track gt001
Manual Gps Track gt001
Product Overview
Thank you for purchasing portable GPS tracker.It’s for monitoring and protecting people
and property with built-in U-blox GPS and GSM/GPRS technology.It also with strong
magnet in the rear and 3300mA backup battery.
Accessories:
1X Device
1X USB charge cable
1X User Guide
1X Guarantee Card
Hardware Specification:
Content Specs.
Mainframe Dimension 71.5*46*22mm
103g
Net weight
GSM frequencies 850/900/1800/1900Mhz
GPRS Class12,TCP/IP
The SIM card is not included in the package.Any SIM card which support GSM 2G can
work and be available from the user’s local operator.
Note: Before installing the SIM card,please check if the SIM card has PIN code or not,if
yes,please use a cell-phone to unlock the card’s PIN code. And make sure it’s activated
with credits.
Device Charging
For the first time use,please fully charge the battery for around 2-3 hours with the USB
charger.
Turn on the device by Inserting Card
Please insert the SIM card in the right direction. You will see the indicator light
sparkles,then turn off.That means the SIM card inserted successfully.
After normal turn-on, the platform will upload position in 10 minutes and you can log on
the website for checking.
※Using your mobile phone,send the above command to the phone number of the
device,it will reply: Center OK!
※To delete this number,you can send :CENTER,000000,0# to the phone number of the
device.
2.GPRS Setting
In order to use the GPRS function,the user needs to setup the APN by sending SMS
command.
--what is APN? Access Point name(APN) is the name used to identify a general packet
radio service (GPRS) bearer service in the GSM mobile network. The APN defines the
type of service that is provided in the packet data connection.
※Make sure that the SIM card in the tracker supports the GPRS function.
※The APN can be acquired from your local GSM operators.
4.Location request
4.1 Reply with coordinates and web link
Command:URL#
The device will reply:the IMEI No,the date,the time,the map link,the longitude
and latitude
Example:3568xxxxxxx2219<01-03 14:59:43>
http://maps.google.com/maps?q=N22.669534,E114.011888
※Put the coordinates to Google earth or Google maps,click on search button,then you will
find the position.
※Click on the link then the location can be shown directly on Google Map on your mobile
phone.
5.Vibration Alarm
Command: VA,ON# (turn on this function)
VA,OFF# (turn off this function)
※This function is off by default setting.
※After sending the command,it will reply:VA OK!
6.Over-Speed Alert
Command: OS,80# (80 is the set-up speed)
OS,OFF# (turn off this function)
※this is to turn on/off the over-speed alarm,speed unit:km/h
※speed range:30-180km
※this function is off by default setting.
※after sending the command,it will reply:OS OK!
Command:#TCP#
※ The device will reply : IMEI NO./WEBSITE:PORT NO./APN##/NETWORK
STATUS/SIGNAL#POWER
Example:353506810007721/www.b.gps903.net:7700/cmnet##/SOC4/165:30#100
9.Reboot device
Command:RESET#
※The device will restart itself without changing any settings.
10.Initialization
Command:RFS#
※This is to make all settings back to the factory default,except the IP.
※Only the center number has the right to operate.
※please caution to use.
11.Working Modes
Command:WKMD,2# (super-long standby mode)
WKMD,1# (power-saving mode)
WKMD,0# (safe mode)
※ the default mode is safe mode.
※ Super-long standby mode:The platform only work when you send a SMS command
to get the location,this is the most power-saving.
※Power-saving mode:The platform only upload LBS location and the location precise
varies according to the cities where it is located . It is purely power-saving.
※Safe mode:The platform will upload GPS location with high precision in real time.
But it is very power-consuming.
How to Connect Device to the Platform for real time tracking via GPRS
Check through PC
Web Platform : www.gps903.net (International)
※please search it in the IOS app store or Google play store or scan the QR
code from the web platform
Note:Only when there is a certain distance between the phone and the GPS
device,the location will show up respectively.
Geo Fence
An electronic fence can be set up after log-in APP or PC. When the device comes out or in
the fence after the set-up is done, it will automatically pop-up warning window.
Cautions:
3.Clear the unit with a piece of dry cloth. Don’t Clean in chemicals,detergent.