GPS Tracker

Manual

Preface
Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly.
Make sure to read this manual carefully before using this product. Please note that specification and
information are subject to changes without prior notice in this manual. Any change will be integrated in the
latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.

1
1. Summary
Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any
remote targets by SMS or internet. The most advanced technology of GPS and AGPS dual positioning. The
waterproof level achieve IPX ‐ 6.

2. Applications

z Vehicle rental / Fleet management etc

z Outdoor sports
z Protect children / elder/ Asset/ pet and so on
z Provide peace‐of‐mind for businessmen
z Personnel Management
z Criminals Tracking

3.Hardware Description

2
4.Specs.

Content Specs.
Dim 77mm x 37mm x 23mm
Weight 55g
Network GSM/GPRS
GSM Band 850/900/1800/1900Mhz
GSM chip SIMTK6260
GPS chip UBLOX
GPS sensitivity ‐159dBm
GPS accuracy 5m
Cold start 35‐80s
Warm start 35s
Hot start Hot status 1s
Car charger Input: 12~24V , Output: 5V
Wall charger Input: 110~220V ; Output: 5V
Battery Li‐ion battery :3.7V, 1000mAh
Standby 240hours
Storage Temp. ‐40°C to +85°C
Operation Temp. ‐20°C to +55°C
Humidity 5%‐‐95% non‐condensing

5.Userage:
5.1 SIM card installation
1).Open the cover, remove the screws by screwdriver,and insert GSM simcard:
2).Push back the cover and install the screws.

<1> <2>

<3> <4>

3
5.2 Battery and Charger

‐‐First time to use:Keep in charged the battery for 8~12 hours Please use the battery and charger provided by
the manufacturer.
‐‐After first use,the battery usually should be charged fully between 3~5 hours.

Cautions:
a: For it’s Li‐ion battery, which contains harmful chemicals and may burst, please don’t bump, puncture it
violently and keep it off fire.
b: Please charge the battery in time to keep it working normally.

6.Startup
1).Power on gps unit:
Insert the SIM card
Turn on the unit outdoors by pressing the Power on button until the indicator is on.
In 10~40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signal.
2).Indicators status:

Green LED: GPRS working status

Status Meaning
flashing GSM / GPRS signal fine
On No GSM signal
off GPS power off/In sleep

Blue LED: GPS working status

Status Meaning
flashing GPS signal Fine
on No GPS signal
off GPS power off/In sleep

Red LED for power charging status

Status of indicator Meaning

Red led on Charging
red led flash Low battery
red led off Full battery or charged full

3)SMS meanings:

1.Google link: URL

2.V:A GPS signal ok. V:V :No GPS signal
3.2014‐04‐18 02:17:15:GPS Time
4.S:000km/h: Speed of tracker
5.Bat:6:Battery Level（Range :1 ~9）
6.ID:4102000759: ID Number of GPS

4
7.Operations (Default password: 123456)

7.1.Change password

SMS format: pwd+old password,new password

Example: pwd123456,666888
it will reply sms: “password OK”
(Note:password should be 6 digits Arabic numbers)

7.2.Set admin phone number:

1).Add admin number:

SMS format: adm123456,0086138********

Note1:The other admin numbers should be set by the first authorized number. If the number is successfully
authorized, the unit will reply “admin ok!” in SMS.
Note2:Note:country code should be added in front of phone number)

2).Delete admin number:

SMS format: adm123456,

Example: adm123456,
Reply sms: ADM！A1:

7.3.Track on demand:

SMS format:G123456#

1).GPS Set with admin numbers: when admin numbers dials up the unit, tracker device will reply by sms,It
wont reply to other numbers

2).GPS without admin numbers: Any cellphone dial up the GPS simcard,tracker device will reply by sms
locations information ,as below:

7.4.Track by GSM Location(Only for admin phone，default:closed）

Command to open :addjz=1

Command to close :addjz=0

5
8.0.Commands List:
Feature name Active Command Reply Cancelother format) Reply
Command
Add admin adm123456,0086138**** ADM ！ adm123456, ADM！A1:
number **** A1:138********
(country code is needed in
front of phone number)
Change password pwd123456,666888 password OK

Inquiry Location G123456# Google map link

Overspeed speed123456 80 speed ok nospeed123456 nospeed ok

(50~120 km/h) (80km/h)
Move alarm move123456 500 move ok nomove123456 nomove ok
(100~5000m)
Shock alarm shock123456 shock ok noshock123456 Noshock ok

Sleep in time Sleep123456 time Sleep time ok If not did any operation,Tracker will be in
mode (Default model:LK109,106) sleep mode in 5 minutes,and it will be
woke up by any calling ,sms or pressing
buttons.
Shock sleep sleep123456 shock sleep shock ok sleep123456 off sleep off ok
mode (Default model:LK208)
Restart Device RST GPS will restart factory All the
settings will
be restored
to be
factory settin
gs
Add sos number SOS,0086138********, SOS ！ S1 ： sos，， SOS！S1：，S2：
0086139******** 138******** ，
S2：139********
Open GSM locate addjz=1 Open GSM locate addjz=0 Close GSM
function locate
function
Set Ip and port adminip123456 adminip ok
60.191.150.102 7700
Set APN Format1: APN OK Format2:apn,cmnet APN OK
apn,cmnet,user,password
GPRS interval upload123456 30 Time ok upload123456 300 Time ok
time (10~300 seconds)
Time Zone time zone123456 2 Time ok time zone123456 ‐3 Time ok

Language LAG1 Switched to LAG2 Switched to

English Chinese

6
Cautions

9.1 Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry.
9.2 Don’t use & store the unit in dusty places.
9.3 Don’t put the unit in overheated or overcooled places.
9.4 Handle carefully. Don’t vibrate or shake it violently.
9.5 Clear the unit with a piece of dry cloth. Don’t clean in chemicals, detergent.
9.6 Don’t paint the unit, this may cause some foreign materials left in between the parts.
9.7 Don’t disassemble or refit the unit.