Nothing Special   »   [go: up one dir, main page]

Que.489699v5npCLASS TEST

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 7

1. Explain OSI Model with neat diagram.

State functionality, protocols and standard


of each layer.
2. Test if 011100101110 code word is correct, assuming they were created using
an even parity Hamming Code .If one is incorrect; indicate what the correct code
word should have been. Also, indicate what the original data was.

3. Before data can be transmitted, they must be transformed to ________.


a.

periodic signals

b.

electromagnetic signals

c.

aperiodic signals

d.

low-frequency sine waves

4. A periodic signal completes one cycle in 0.001 s. What is the frequency?


a.

1 Hz

b.

100 Hz

c.

1 KHz

d.

1 MHz

5. The physical layer concerns with


a.

bit-by-bit delivery

b.

process to process delivery

c.

application to application delivery

d.

none of the above

6. The physical layer translates logical communication requests from the ______
into hardware specific operations.
a.

data link layer

b.

network layer

c.

trasnport layer

d.

application layer

7. _______ is a type of transmission impairment in which the signal loses strength


due to the resistance of the transmission medium.
a.

Attenuation

b.

Distortion

c.
Noise

d.

Decibel

8. ________ is a type of transmission impairment in which the signal loses strength


due to the different propagation speeds of each frequency that makes up the
signal.
a.

Attenuation

b.

Distortion

c.

Noise

d.

Decibel

9. ________ is a type of transmission impairment in which an outside source such


as crosstalk corrupts a signal.
a.

Attenuation

b.

Distortion

c.

Noise

d.

Decibel

10. _______ data are continuous and take continuous values.


a.

analog

b.

digital

c.

(a) or (b)

d.

none of the above

11. The method of communication in which transmission takes place in both


directions, but only one direction at a time is called

A. Simplex

B. Four wire circuit

C. Full Duplex

D. Half Duplex

12. Error detection at the data link level is achieved by

A. Bit Stuffing

B. Cyclic Redundancy Code

C. Hamming Code

D. Equalization

13. The OSI _______ layer is implemented mainly by hardware

a. application
b. session
c. presentation
d. physical
14. As the data packet moves from the _______ layer down to the _______ layer,
headers and a trailer are added
A. application; physical
B. physical; application
C. network; application
D. data link; application

15. The _______ layer defines the characteristics of the interface between the
devices and the transmission medium

A. physical
B. data link
C. network
D. transport

16. The _______ is defined by the physical layer.

A. logical address
B. session dialog
C. data rate
D. encryption method
E.
17. Which of these is a standard interface for serial data transmission?

A. ASCII
B. RS232C
C. 2
D. Centronics

18. Which type of topology is best suited for large businesses which must carefully
control and coordinate the operation of distributed branch outlets?

A. Ring
B. Local area
C. Hierarchical
D. Star

19. "Parity bits" are used for which of the following purposes?

A. Encryption of data
B. To transmit faster
C. To detect errors
D. To identify the user

20. What kind of transmission medium is most appropriate to carry data in a computer
network that is exposed to electrical interferences?

A. Unshielded twisted pair


B. Optical fiber
C. Coaxial cable
D. Microwave

21. A collection of hyperlinked documents on the internet forms the ?.?

A. World Wide Web (WWW)


B. E-mail system
C. Mailing list
D. Hypertext markup language

22. A proxy server is used as the computer?

A. with external access


B. acting as a backup
C. performing file handling
D. accessing user permissions

You might also like