SPROUT சவுண்ட்லூப் பார்ட்டி ஸ்பீக்கர் அறிவுறுத்தல் கையேடு

Controls: Guitar volume, Echo, Mic volume, Volume down, Light
effects, Next/previous track, Play/pause/answer, Volume up,
PartySync, Bass boost, Power button

தயாரிப்பு பயன்பாட்டிற்கான வழிமுறைகள்:

புளூடூத் வழியாக இணைக்கிறது:

1. Power on the Soundloop Party Speaker by pressing the power
பொத்தான்.

Connecting via Micro SD Card:

To play audio using a Micro SD card:

Ensure the Soundloop Party Speaker is switched on.

Insert the Micro SD card into the Micro SD media input.
The speaker will automatically go into Micro SD mode with a
green LED indicator.

Control your music/audio using the volume and play/pause/answer
ஸ்பீக்கரில் பொத்தான்கள்.
When paused, the LED indicator will flash green.

Connecting via USB-A:

To play audio using a USB-A drive:

Ensure the Soundloop Party Speaker is switched on.

Insert the USB-A drive into the USB-A media input.
The speaker will automatically go into USB mode with a light
blue LED indicator.

Control your music/audio using the volume and play/pause/answer
ஸ்பீக்கரில் பொத்தான்கள்.
When playing, the LED indicator will be solid blue.

Connecting via 3.5mm Aux Cable in Auxiliary Mode:

ஆக்ஸ் கேபிளைப் பயன்படுத்தி ஆடியோவை இயக்க:

Short press the power button after the Soundloop Party Speaker
இயக்கப்பட்டது.

The LED indicator will flash green to indicate auxiliary
முறை.
Connect the 3.5mm aux cable from the speaker’s aux port to your
சாதனம்.

Soundloop Party Speaker will play the audio when you press
‘play’ on your device.
To stop auxiliary mode and reconnect Bluetooth, short press the
ஆற்றல் பொத்தானை.

அடிக்கடி கேட்கப்படும் கேள்விகள்:

Q: How do I charge the Soundloop Party Speaker?

A: You can charge the speaker using the provided USB-C to USB-C
சார்ஜிங் கேபிள்.

கே: நான் பல சாதனங்களை ஒரே நேரத்தில் இணைக்க முடியுமா?
புளூடூத்?

A: The Soundloop Party Speaker does not support connecting
multiple devices simultaneously via Bluetooth. It will disconnect
from the current device when in auxiliary mode.

View Fullscreen

SOUNDLOOP PARTY SPEAKER
தயாரிப்பு கையேடு

நாங்கள் எங்கள் தொழில்நுட்பத்தில் அதிக கவனம் செலுத்துகிறோம், எனவே நீங்கள் வாழ்க்கையில் மேலும் பலவற்றைப் பெறலாம்.
ஸ்ப்ரூட்டில், உங்கள் தொழில்நுட்பத்தின் திறனைத் திறக்க உதவுவதே எங்கள் நோக்கம். நாங்கள் ஒரு ஆஸ்திரேலிய பிராண்ட், மேலும் எங்கள் தயாரிப்புகள் அனைத்தையும் உள்நாட்டிலேயே வடிவமைத்து, அவை உங்கள் வாழ்க்கை முறைக்கு ஏற்றதாக இருப்பதை உறுதிசெய்கிறோம்.

உள்ளடக்கங்கள்

01 பெட்டியில் என்ன இருக்கிறது?

02. தயாரிப்பு முடிந்துவிட்டதுview

03. விரைவு தொடக்க வழிகாட்டி

04. Operating controls

05. விவரக்குறிப்புகள்

06. Important safety info

07. Consumer guarantee

இந்த கையேட்டின் ஆன்லைன் பதிப்பை அணுக QR குறியீட்டை ஸ்கேன் செய்யவும்
1

1.1. WWHHAATT’S’SIN ITNHETBHOEX?BOX?
Thank you for choosing the Soundloop Party Speaker by Sprout. For optimum performance and safety, please read instructions carefully before usage. Please keep this manual for future reference. 1x Soundloop Party Speaker 1x USB-C to USB-C charging cable 1x Microphone 1x Microphone cable 1x Product manual

2. தயாரிப்பு முடிந்துவிட்டதுVIEW

1. Guitar volume +/- buttons 2. Echo +/- buttons 3. Mic volume +/- buttons 4. Volume down button 5. Light effects button 6. Next/previous track button 7. Play/pause/answer button

8. Volume up button 9. PartySync button 10. LED battery indicator 11. Bass boost button 12. LED indicator 13. Power button

123

46 8

11 12

1. Micro SD media input 2. USB-A media input 3. Microphone input port 4. 3.5mm aux input port 5. Guitar input port 6. USB-C charger input

1 23 5

31.. QWUHAICT’KS INSTTAHERBTOGX?UIDE
TURNING SOUNDLOOP PARTY SPEAKER ON/OFF To power on, long press the power button for 2 seconds. Soundloop Party Speaker will announce “power on” whilst the LED indicator light at the top will light up. It will flash blue quickly until a Bluetooth connection has been established. To power off, long press the power button for 3 seconds. The speaker will announce “power off” with the LED indicator also turning off. To preserve battery, Soundloop Party Speaker will automatically turn off after 30 minutes of no Bluetooth connection.
4

3. விரைவான தொடக்க வழிகாட்டி
CONNECTING VIA BLUETOOTH 1. Firstly, power on Soundloop Party Speaker by pressing the
power button for 2 seconds. The LED indicator light will flash blue quickly to indicate Soundloop Party Speaker is ready for pairing.* 2. Turn on Bluetooth on your mobile phone/ music device.** 3. `SOUNDLOOP PARTY SPEAKER’ will appear on your mobile phone/music device. Select `SOUNDLOOP PARTY SPEAKER’ to pair. 4. Once your mobile phone/music device is connected to the Soundloop Party Speaker, the LED indicator light will flash blue slowly, and the speaker will announce “Bluetooth connected”.*** 5. Enjoy your music. *Soundloop Party Speaker will automatically enter Bluetooth pairing mode when turned on for the first time. To disconnect your device from Bluetooth, press and hold the play/pause/answer button for 2 seconds. Repeat this process to reconnect Bluetooth. **If you are not familiar with Bluetooth pairing for your mobile phone or music device, refer to the user guide for your mobile phone/music device for instructions to pair a new device using Bluetooth. ***Soundloop Party Speaker will always store the last device paired and if the device is within Bluetooth range, Soundloop Party Speaker will automatically connect to the device.
5

31.. QWUHAICT’KS INSTTAHERBTOGX?UIDE
CONNECTING VIA MICRO SD CARD
To play audio using a Micro SD card, firstly ensure Soundloop Party Speaker is switched on. Insert your Micro SD card into the Micro SD media input and Soundloop Party Speaker will automatically go into Micro SD mode. The LED indicator light will be green to indicate Micro SD mode and will play your media. Using the volume and play/ pause/answer buttons, you can directly control your music/audio from Soundloop Party Speaker. When the media is paused, the LED indicator will be flashing green.
CONNECTING VIA USB-A
To play audio using a USB-A drive, firstly ensure Soundloop Party Speaker is switched on. Insert your USB-A drive into the USB-A media input and Soundloop Party Speaker will automatically go into USB mode. The LED indicator light will flash light blue to indicate USB mode. Using the volume and play/pause/answer buttons, you can directly control your music/audio from Soundloop Party Speaker. When you press play, the LED indicator will be solid blue.
CONNECTING VIA 3.5MM AUX CABLE IN AUXILIARY MODE
To play audio using the aux cable, short press the power button only after Soundloop Party Speaker is switched on. The LED indicator light will flash green to indicate auxiliary mode. Next, connect the 3.5mm aux cable from the Soundloop Party Speaker aux port to your device. Soundloop Party Speaker will play the audio when you press `play’ on your device.
Please note: When in auxiliary mode, Bluetooth connections will disconnect from Soundloop Party Speaker. To reconnect Bluetooth and stop auxiliary mode, short press the power button.
6

3. விரைவான தொடக்க வழிகாட்டி
CHARGING YOUR SOUNDLOOP PARTY SPEAKER 1. Open the port cover on the back of the speaker and connect
via the USB-C port to a USB-C power source, using the included charging cable. 2. The LED battery indicator will flash from one to four LEDs to indicate Soundloop Party Speaker is charging. The lights will stop flashing once Soundloop Party Speaker is fully charged. A full charge will take approximately 4 hours, depending on the speed of the charger. Once charged, remove the charging cable and replace the port cover. Please note: Soundloop Party Speaker will announce “battery low” when the battery level reaches approximately 15%. LED BATTERY INDICATOR 4 white lights on: Battery 76 – 100% 3 white lights on: Battery 51 – 75% 2 white lights on: Battery 26 – 50% 1 white light on: Battery 0 – 25%
7

31.. QWUHAICT’KS INSTTAHERBTOGX?UIDE
மைக்ரோஃபோனை இணைக்கிறது
To use the included microphone, connect the cable to the microphone making sure to carefully align the pins. Then proceed to connect the cable into Soundloop Party Speaker’s microphone input port. You can control the volume of the microphone by pressing the mic volume +/- buttons. You can also control the echo using the echo +/- buttons.
Please note: In PartySync mode, the microphone will only work on the speaker it is connected to.
CONNECTING YOUR GUITAR
To use a guitar, connect the guitar cable (not included) to your guitar. Then proceed to connect the cable into Soundloop Party Speaker’s guitar input port. You can control the volume of the guitar by pressing the guitar volume +/- buttons.
Please note: In PartySync mode, the guitar will only work on the speaker it is connected to. It is possible to also use other audio accessories with a 6.3mm jack plugged in the guitar input, such as an additional microphone (not included).
USING LIGHT EFFECTS
To use light effects on Soundloop Party Speaker, short press the light effects button. Continue pressing the button to cycle through 8 available modes.
Please note: Some light effects will sync with the music you are playing through Soundloop Party Speaker.

3. விரைவான தொடக்க வழிகாட்டி

41.. OWPHEATR’SAITNINTHGE BCOOX?NTROL
LED INDICATOR · Fast flashing blue Bluetooth pairing mode · Slow flashing blue Bluetooth connected · Flashing green auxiliary mode on · Flashing light blue USB connected and paused · Solid blue USB connected and playing · Solid green Micro SD connected and playing · Flashing green Micro SD connected and paused POWER BUTTON · 2 second long press power on · 3 second long press power off · 1 press change mode (Bluetooth/auxiliary mode) BASS BOOST BUTTON · 1 press bass boost on/bass boost off PARTYSYNC BUTTON · 2 second long press – PartySync mode on/off VOLUME UP BUTTON · 1 press volume up VOLUME DOWN BUTTON · 1 press volume down
10

4. OPERATING CONTROL
NEXT/PREVIOUS TRACK BUTTON · 1 press next track · 2 second long press – restart track · 2 second long press x2 – previous track PLAY/PAUSE BUTTON · 1 press pause/play (when in auxiliary mode, Soundloop
will only mute audio). · 2 second long press disconnect/reconnect Bluetooth LIGHT EFFECTS BUTTON · 1 press cycles through 8 light effects MIC VOLUME +/- BUTTONS · 1 press – volume up or down ECHO +/- BUTTONS · 1 press – echo up or down GUITAR VOLUME +/- BUTTONS · 1 press – volume up or down Please note: Max volume on any volume control will be indicated by a short beep.
11

41.. OWPHEATR’SAITNINTHGE BCOOX?NTROL
CONNECTING MULTIPLE SPEAKERS VIA PARTYSYNC
You can connect up to 50 compatible speakers with PartySync.
இதில் முன்னாள்ample, your Soundloop Party Speaker is your primary device with each additional device connected as a replica.
To connect via PartySync, press and hold the PartySync button on the primary speaker until you hear a beep, to enter PartySync mode. Once the PartySync button on the primary flashes, repeat on the replica. Once connected, the speakers will both play music at the same time.
Repeat to connect additional replica units
To exit PartySync mode, long press the PartySync button once more. Music will no longer play from this speaker. If you exit PartySync mode on the primary speaker, all speakers will disconnect from the primary speaker.
Please note: Volume for all speakers will be controlled by the primary speaker.

5. விவரக்குறிப்புகள்
· Dimensions: 300 x 290 x 350mm · Unit weight: 4000g · USB-C input: 5V2A (10W) · Battery capacity: 4400mAh · Playtime: Up to 9 hours at 50% volume · Driver size: 2 x 50mm · Woofer size: 1 x 165mm · Frequency response: 80-16kHz · Power output: 30W + 15W x 2 · Total power output: 60W RMS · Bluetooth version: 5.3 · Wireless range: approx. 9m · Aux input: 3.5mm · Microphone input port: 6.3mm · Guitar input port: 6.3mm · SD card media input: MicroSD · USB media input: USB-A

61.. IWMHPAOT’SRTINATNHTE BSOAX?FETY INFO
EPILEPSY WARNING When viewing flashing lights, some people may experience epileptic seizures.
14

6. IMPORTANT SAFETY INFO
1. Do not attempt to charge Soundloop Party Speaker when it is wet or you suspect water has seeped into the device. Thoroughly dry Soundloop Party Speaker and make sure all connections are dry before attempting to open the port cover. Failure to do so may result in electrical shock, fire or electrical damage to Soundloop Party Speaker and may void the warranty
2. Do not use Soundloop Party Speaker near an open fire, heat source or excessive heat
3. Do not disassemble this device or attempt to modify in any manner
4. Sound levels should be appropriate to your environment and comply with all local regulations
5. Ensure that you can hear and are aware of any potential hazards around you when you are enjoying your Soundloop Party Speaker
அனைத்து ஸ்ப்ரூட் தயாரிப்புகளும் முழுமையான தர உத்தரவாத ஆய்வுகள் மூலம் செல்கின்றன. உங்கள் சாதனம் அதிக வெப்பமாக இருப்பது, துர்நாற்றம் வீசுவது, சிதைப்பது, சிராய்ப்பு, வெட்டப்பட்டது அல்லது அசாதாரண நிகழ்வை அனுபவிப்பது அல்லது நிரூபிப்பது போன்றவற்றை நீங்கள் கண்டால், உடனடியாக அனைத்து தயாரிப்பு பயன்பாட்டையும் நிறுத்திவிட்டு, ஸ்ப்ரூட்டைத் தொடர்பு கொள்ளவும்.
15

7.1. CWOHANTS’SUINMTEHRE BGOUX?ARANTEE
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you have any questions about your rights in relation to this product, please return it to point of sale or contact us at enquiries@sproutinc.com.au. This warranty does not affect your legal statutory rights under the Australian Consumer Law. For more information about your rights under Australia Consumer Law go to www.accc.gov.au. Your Soundloop Party Speaker is warranted to the original owner for 24 months from the date of purchase against defects in material and workmanship under normal use and service. The warranty does not cover misuse of this product and liability will not exceed the purchase price of the product. If you have any problems while using the product, please do not hesitate to contact our customer support team. For warranty and technical support please visit sproutinc.com.au or email enquiries@sproutinc.com.au. Thank you for choosing a Sprout product.
16

முளை பாகங்கள் பிரைவேட் லிமிடெட்
W: Sproutinc.com.au | E: enquiries@sproutinc.com.au