1.
|
Status of the Demonstrator Magnets for the EuCARD-2 Future Magnets Project
/ Kirby, G (CERN) ; Rossi, L (CERN) ; Badel, A (Grenoble, INP) ; Bajko, M (CERN) ; Ballarino, A (CERN) ; Bottura, L (CERN) ; Dhalle, M (Twente U., Enschede) ; Durante, M (Saclay) ; Fazilleau, P (Saclay) ; Fleiter, J (CERN) et al.
EuCARD-2 is a project partly supported by FP7 European Commission aiming at exploring accelerator magnet technology for 20-T dipole operating field. The EuCARD-2 collaboration is liaising with similar programs for high-field magnets in the U.S. [...]
2016 - 7 p.
- Published in : IEEE Trans. Appl. Supercond. 26 (2016) 4003307
In : 12th European Conference on Applied Superconductivity, Lyon, France, 06 - 10 Sep 2015, pp.4003307
|
|
2.
|
The EuCARD-2 Future Magnets European Collaboration for Accelerator-Quality HTS Magnets
/ Rossi, L (CERN) ; Badel, A (Grenoble, INP) ; Bajko, M (CERN) ; Ballarino, A (CERN) ; Bottura, L (CERN) ; Dhallé, M M J (Twente U., Enschede) ; Durante, M (IRFU, Saclay) ; Fazilleau, Ph (IRFU, Saclay) ; Fleiter, J (CERN) ; Goldacker, Wilfried (KIT, Karlsruhe) et al.
EuCARD-2 is a project supported by FP7-European Commission that includes, inter alia, a work-package (WP10) called “Future Magnets.” This project is part of the long term development that CERN is launching to explore magnet technology at 16 T to 20 T dipole operating field, within the scope of a study on Future Circular Colliders. The EuCARD2 collaboration is closely liaising with similar programs for high field accelerator magnets in the USA and Japan. [...]
2015 - 7 p.
- Published in : IEEE Trans. Appl. Supercond. 25 (2015) 4001007
In : Applied Superconductivity Conference 2014, Charlotte, NC, USA, 10 - 15 Aug 2014, pp.4001007
|
|
3.
|
First Cold Powering Test of REBCO Roebel Wound Coil for the EuCARD2 Future Magnet Development Project
/ Kirby, Glyn A (CERN) ; van Nugteren, Jeroen (CERN) ; Bajas, H (CERN) ; Benda, V (CERN) ; Ballarino, A (CERN) ; Bajko, M (CERN) ; Bottura, Luca (CERN) ; Broekens, K (CERN) ; Canale, M (CERN) ; Chiuchiolo, A (CERN) et al.
EuCARD-2 is a project partly supported by FP7-European Commission aiming at exploring accelerator magnet technology for 20 T dipole operating field. The EuCARD-2 collaboration is liaising with similar programs for high field magnets in the USA and Japan. [...]
2017 - 7 p.
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4003307
Fulltext: PDF;
In : Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.4003307
|
|
4.
|
Accelerator Quality HTS Dipole Magnet Demonstrator Designs for the EuCARD-2, 5 Tesla 40 mm Clear Aperture Magnet
/ Kirby, G A (CERN) ; van Nugteren, J (CERN) ; Ballarino, A (CERN) ; Bottura, L (CERN) ; Chouika, N (CERN) ; Clement, S (CERN) ; Datskov, V (CERN) ; Fajardo, L (CERN) ; Fleiter, J (CERN) ; Gauthier, R (CERN) et al.
Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The EuCARD-2 work-package-10 is a collaborative push to take HTS materials into an accelerator quality demonstrator magnet. [...]
CERN-ACC-2015-0024.-
Geneva : CERN, 2015 - 6 p.
- Published in : IEEE Trans. Appl. Supercond. 25 (2015) 4000805
Fulltext: PDF;
In : Applied Superconductivity Conference 2014, Charlotte, NC, USA, 10 - 15 Aug 2014, pp.4000805
|
|
5.
|
The EuCARD2 Future Magnets Program for Particle Accelerator High-Field Dipoles: Review of Results and Next Steps
/ Rossi, Lucio (CERN) ; Badel, Arnaud (IUT, Grenoble) ; Bajas, Hugues (CERN) ; Bajko, Marta (CERN) ; Ballarino, Amalia (CERN) ; Barth, Christian (Geneva U.) ; Betz, Ulrich (SIS GmbH) ; Bottura, Luca (CERN) ; Broggi, Francesco (LASA, Segrate) ; Chiuchiolo, Antonella (CERN) et al.
The EuCARD2 collaboration aims at the development of a 10 kA-class superconducting, high current density cable suitable for accelerator magnets, to be tested in small coils and magnets capable to deliver 3-5 T when energized in stand-alone mode, and 15-18 T when inserted in a 12-13 T background magnet. REBCO tape, assembled in a Roebel cable, was selected as conductor. [...]
2017 - 10 p.
- Published in : IEEE Trans. Appl. Supercond. 28 (2017) 4001810
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4001810
|
|
6.
|
Mechanical Effects of the Non-Uniform Current Distribution on HTS Coils for Accelerators Wound with REBCO Roebel Cable
/ Murtomaki, Jaakko S (Tampere U. of Tech.) ; Murtomaeki, Jaako (dir.) (TUT, Tampere, Finland and CERN, Geneva, CH) ; van Nugteren, Jeroen (Twente U., Enschede) ; Kirby, Glyn (CERN) ; Rossi, Lucio (CERN) ; Ruuskanen, Janne (Tampere U. of Tech.) ; Stenvall, Antti (Tampere U. of Tech.)
Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The EuCARD-2 WP10 Future Magnets collaboration is aiming at testing HTS-based Roebel cables in an accelerator magnet. [...]
CERN-ACC-NOTE-2017-0045.-
Geneva : CERN, 2017
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4100405
Fulltext: PDF;
In : Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.4100405
|
|
7.
|
|
8.
|
Development of a Roebel-cable-based cosθ dipole: design and windability of magnet ends
/ Lorin, Clément (Saclay) ; Durante, Maria (Saclay) ; Fazilleau, Philippe (Saclay) ; Kirby, Glyn (CERN) ; Rossi, Lucio (CERN)
In the scope of the Future Circular Collider, work package 10, namely “Future Magnets”, of the EuCARD2 project aims at investigating accelerator quality magnets made of High Temperature Superconductors. The present paper deals with development of a cosθ dipole relying on Roebel cable technology. [...]
CERN-ACC-2016-0035.-
Geneva : CERN, 2016
- Published in : IEEE Trans. Appl. Supercond. 26 (2016) 4003105
Fulltext: PDF;
In : 12th European Conference on Applied Superconductivity, Lyon, France, 06 - 10 Sep 2015, pp.4003105
|
|
9.
|
|
Accelerator Quality HTS Dipole Magnet Demonstrator designs for the EuCARD-2, 5 Tesla 40 mm Clear Aperture Magnet
/ Kirby, G (CERN) ; van Nugteren, J (CERN) ; Ballarino, A (CERN) ; Bottura, L (CERN) ; Chouika, N (CERN) ; Clement, S (CERN) ; Datskov, V (CERN) ; Fajardo, L (CERN) ; Fleiter, J (CERN) ; Gauthier, R (CERN) et al.
Future high-energy accelerators will need very high magnetic fields in the range of 20 T. [...]
CERN-ACC-2014-0305.
-
2014.
Full text
|
|
10.
|
Study of a 5T Research Dipole Insert-Magnet using an Anisotropic ReBCO Roebel Cable
/ Van Nugteren, J (CERN) ; Kirby, G A (CERN) ; De Rijk, G (CERN) ; Rossi, L (CERN) ; Ten Kate, H H J (CERN) ; Dhallé, M M J (Twente U., Enschede)
A design study is presented for the coil layout of the EuCARD-2 Fiver Tesla HTS Research (FeaTHeR) magnet. The angular dependence of the critical current in the used ReBCO Roebel cable is taken into account. [...]
CERN-ACC-2015-0058; CERN-ACC-2014-0329.-
Geneva : CERN, 2015 - 6 p.
- Published in : IEEE Trans. Appl. Supercond. 25 (2015) 4000705
Fulltext: tasc-vannugteren-2361797-proof - PDF; CERN-ACC-2015-0058 - PDF; CERN-ACC-2014-0329 - PDF;
In : Applied Superconductivity Conference 2014, Charlotte, NC, USA, 10 - 15 Aug 2014, pp.4000705
|
|