Computer System Servicing NC II

COMPUTER SYSTEM
SERVICING NC II
POINTERS TO
REVIEW
COC1
• 2hours
• Disassembly / Assembly of Computer
• Observe Occupational Health & Safety
• Making A Bootable Media (FlashDrive)
• Using Rufus
• UEFI boot in BIOS settings
• Operating System Installation
• Windows Server 2008 Enterprise
• Delete Existing Partition
• Create two partition
c: = 40G d: = remaining space
Format the D:
Install the Drivers
COC1
Disassembly and Assemble of computer system
• Inventory your Dis-assembled System Unit
Example Brand Type Frequency Size
Name Specification Quantity Remarks
MATERIALS:
Memory Kingston, DDR1 (PC3200), 256MB 1 Good (Functional)
Processor with AMD Sempron 2200 (2.40 ghz)
heatsink/fan
TOOLS: Brand Model Frequenzy/size

Crimping Tools Germany (Green) RJ45 1 Defective
EQUIPMENT:
Router TP-Link (8 port) 1 Good
WORK AREA:
Table 4x4 (Wooden) 1 Good
Try to Inventory the Following and put your answer in the inventory form.
COC2
• 2.5 hours
• Cabling Infrastructure
• The Patch Panel
• Switch/hub
• Keystone Jack /Modular Jack
• Wallplate or faceplate
• Router and Access Points (Repeater)
• Wireless Configuration
• Resetting the Router and Access Points
• Configure the router to access its interface eq: 192.168.1.1
• Configure the Repeater
• Connect wirelessly using the wifi connection and show the router interfaces
RJ-45
REPEATER or ACCESS POINT
to patch
ROUTER WIRELESS PC
RJ-45 Straight thru
RJ-45
SWITCH
2U
Patch Panel
KEYSTONE/MODULAR JACK PC - CABLED

REPEATER or ACCESS POINT ROUTER
WIRELESS PC
Patch Panel
SWITCH
KEYSTONE/MODULAR JACK PC - CABLED

COC2 - Setup Computer Networks
Sample Instruction to be given by your assessor
 Create Network Cables
 Network Configuration
 Configure your Router (Wireless, MAC, QOS, Port Forwarding)
- If the default IP Address of your router is 192.168.1.1 change it to 192.168.10.1 subnet
or depend on the demand of your competency assessor (ex: 192.168.10.254)
For references go to this link:
https://www.tp-link.com/us/support/faq/67/
https://eu.dlink.com/uk/en/support/faq/routers/mydlink-routers/dir-810l/how-do-i-change-the-ip-address-of-my-router
https://www.youtube.com/watch?v=TmPXzc0-cO8
 Connect your wireless device (laptop) in your created SSID (Wifi)
 Filter your device in order allow/Deny your device (depend on assessor) using MAC filtering
https://router-setup.co/how-to-add-mac-address-to-router-tp-link
https://www.dlink.com.ph/how-do-i-configure-mac-address-filtering-on-my-dir-816-router/
http://www.dlink.cc/tag/mac-address
https://www.youtube.com/watch?v=3cbpY3wdoyg
https://www.youtube.com/watch?v=PZ339t2OGo8
COC3 - Setup Computer Server
• Install and configure a Windows Server 2008/2012 OS
• Promote the server to a Domain Controller
• Configure the Domain Name Service (DNS) role on the server
• Configure the Dynamic Host Configuration Protocol (DHCP) role on the server
• Create an Organizational Unit (OU) and create two (2) user accounts
• Join the clients (laptop and desktop) to the domain
• Install the File and Storage role on the server
• Create a share in the server and map it on the clients
• Create a folder in the server; share it (read/write) for FOLDER redirection.
• Redirect documents and desktop of the clients
• Configure remote desktop on all the machines
• Install Print Management
• Install a printer in the server, install the driver
• Configure printer deployment
https://www.youtube.com/watch?v=Y4noIXXtJMU
COC3 1.5 hours FOLDER REDIRECTION
1.) MAKING A CLIENT / SERVER , P2P NETWORK - User Configuration – Windows Setting – Folder Redirection –
• Configure Server Name, check the password, Desktop (depends on instruction)
Desktop (right click – properties)
and IP Address (client for Microsoft, file and printer services, Choose – Basic Redirect Everyone to the same Location
TCP/IP Ver 4) Class C IP Then paste the Path that you have copied in STEP 1
*INSTALLATION OF ROLES (SERVER MANAGER) Apply – Yes
ADD ROLE – ACTIVE DOMAIN NAME SYSTEM PRINTER DEPLOYMENT
• Creating Domain Name: Dcpromo (Run Command) ADD ROLE – PRINT AND DOCUMENT SERVICES (printer to share and
* Pls don’t check advance mode (sample.local or sample.com)
deploy to network)
• FOREST FUNCTIONAL LEVEL - Select windows Server 2008 R2 (password same to Server Password)
Go to Administrative Tools – Print Server – printer – (right click)
• ACTIVE DIRECTORY USERS AND COMPUTERS DEPLOY WITH GPO
• Create Organizational Unit (right click – new – organizational unit (SampleOU) (click the GPO that your created in your OU)
• Right Cllick - SampleOU – Users – client1 – create password Checked the 2 checkbox - Add – Apply
• DNS (already installed) • Run the command GPUPDATE
ADD ROLE – DHCP (CONFIGURING THE IP OF THE CLIENT) • REMOTE DESKTOP (Go to Computer Properties – Remote –
IPV4 DNS Settings – Preferred DNS Server (IP address of the Server) Check – Allow Remote assistance & Allow users to connect
IPV4 Wins Setting – Wins is required (IP Address of the Server) remotely
DHCP Scope – Scope Name (SampleScope) Start and End IP (client IP) Setting for Client:
Disable DHCP IPv6 Computer Properties – connect to Domain you created instead of
Workgroup
ADD ROLE - FILE SERVICES (Folder Redirection) (Folder Sharing) Sign-out – sign in to your user (Client 1 and Password)
STEP 1: Share Folder – ex: C:\users\Server\Desktop (right click on desktop – sharing – everyone
– add – read / write) Copy this location Note: Before connecting to domain server – you must have know
Creating GROUP POLICY MANAGEMENT (Start – Administrative Tools – Group Policy or have a password for your local administrator account for
Management) contingency measures once that you are not connected to server.
- Expand the menu – your domain (sample.com) click the domain you created
- Select the OU – your created Organizational Unit to have a Group Policy Once you are connected to server – The desktop have
- Create new GPO (right click) ex: SampleGPO automatically create folder for your client
- Then Edit (right click) to Start Folder Redirection
COC4 – Maintain Computer System and Network
CREATING A BACKUP
In windows Server the backup features are not installed in default you must add features to
enable this in Windows Server 2008
• Depend on the assessor instruction you can make a system image backup or customized
backup from PC1 desktop to PC2 Drive D: Backup folder and Vice Versa PC2 Desktop to PC1,
D:\Backup
• Sometimes, the assessor demand a System Restore Backup
• Please make sure that the firewall are turn off to avoid undesirable network error
• In Network Advance Sharing, you can also turn off the password protected sharing
COC4 – Maintain Computer System and Network
CREATING A BACKUP
• Create a Folder in your source desktop (PC1) (ex: yoursurname folder)
Inside the Folder (create a file to be backup ex: yourname.txt)
Inside the txt file (type your fullname and)
* This created folder will be use for your backup purposes
• In your target (PC2) computer make a Folder in drive D: (Folder Backup)
• this will be the target or storage backup in your network
• Perform Customize Backup
• Backup your created folder in your computer 1 (PC1) to the Drive D:\Backup of computer2
(PC2)
https://www.youtube.com/watch?v=kRe_pIYRnL0
Perform this Backup Vice Versa (PC2 to PC1)

GOOD LUCK, HAPPY ASSESSMENT
• From: Sir Rommel P. Patorito
• Don’t Reproduce and Share this Reviewer
• Importantly Don’t Print and Bring a copy of this Reviewer
during the assessment

Computer System Servicing NC II

Uploaded by

Copyright:

Available Formats

Computer System Servicing NC II

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Computer System Servicing NC II

Uploaded by

Copyright:

Available Formats

COMPUTER SYSTEM

TOOLS: Brand Model Frequenzy/size

KEYSTONE/MODULAR JACK PC - CABLED

KEYSTONE/MODULAR JACK PC - CABLED

Perform this Backup Vice Versa (PC2 to PC1)

You might also like