COC 1 INSTALL AND CONFIGURECOMPUTER

SYSTEMS • Create and Connect T-568-A and T-568-B

cable using your designed network layout
ASSEMBLE/DISASSEMBLE • Conduct testing on connectivity of cable
• Memorize all PC parts and function
• Configure Networks
CREATE BOOTABLE DISK DRIVE
(Windows 10 client and Windows 2016 server)
• Insert flash drive
*note: be sure to reset the router, to reset, use a small
• Format Flash drive
pin and press the reset hall for 20 seconds, wait until all
• Right click power ISO, run as administrator,tools,
the lights blink and release the button.
create bootable disk drive,click folder
icon,browse the ISO file (windows server 2016) Configure the Router IP address using class A, B, C
• Click start

*note: (if power ISO is not installed, install it.)

REFORMATING

• Insert flash drive, restart pc by pressing restart

button
• Press f2/delete
• Go to Boot option
• 1st boot option Choose (flash drive (Sandisk,
Kingstone, etc.)
• 2nd boot option choose (sata, p1, p2)
• Click f10 or save changes and reset)
• Wait and perform the reformatting process Start Menu, then type cmd, then type ipconfig to
• Click next show the default gateway
• Window Server 2016 PC – 2 partitions 160gb Open Internet explorer, type the default gateway
Partition 1 = 50%GB (80x1024)MD (192.168.1.1 or 192.168.0.1) in the address bar.
Partition 2 = the remaining unallocated space Username: admin
Password: admin
Password: Css@12345 Click log in
• Note: Skip product key to accomplish the next
procedure • Click wireless, Find SSID and replace Router
• Install drivers name and WAP name with your last name in
• Install Application capital letters
WinRAR and USB Guard • Click save
Pdf reader and USB Guard • Click Wireless Security, find password and
VLC and USB Guard replace to Css@12345
• Conduct Testing on router’ SSID and WAP’s SSID
COC 2 SETUP COMPUTER NETWORKS Connection
• Go to network and sharing center, click change
• Install Network Cable advance sharing setting, turn on all except
• Design and Draw network layout using the password protected sharing, click save changes
computer networks • Go to network and sharing center, click
windows firewall, click turn windows firewall on
DESCRIPTION CABLE and off, select turn off, click ok.
MEASUREM
• Configure Internet connection and conduct
ENT
testing with MAC Filtering in router
2 Client / Server (PC) to Modular Approx.2m
Box COC3-SET UP COMPUTER SERVER
2 client / server (modular box) to Approx.1m
patch panel I.PEER TO PEER (server and client)
2 client/server (patch panel to hub) Approx.0.5m SERVER
1 router to patch panel Approx.0.5m
1.) IP Address
1 (router’s) patch panel to Hub Approx.0.5m
1 wireless Access Point (WAP) Approx.0.5m Ip Adress (192.168.1.1)
1 (WAP) patch panel to Hub Approx.0.5m
 • Start Menu (search control panel, then look change then set computer name to CLIENT
for Network and Sharing Center, click and set workgroup to CSSNCII, then click ok,
change adapter settings then, right click close and automatically restart computer.
ethernet, select properties, choose
4.) Shared Folder
(TCP/IPv4), click properties, and let use the
following ip address (192.168.1.1) on the • Right click desktop, select new, select
subnet mask click the text box. Then close folder, type name folder (CLIENT) Right click
the windows. folder, click sharing tab, click share, in add
menu select everyone(make sure
2.) TURN OFF PASSWORD PROTECTED SHARING
permission level is read/write) then share
• Start Menu (search control panel, then look then click yes then done
for Network and Sharing Center, click • Click advance sharing, check box(share this
advanced sharing settings, expand all folder, click permission, click allow
network profile then torn off password permission. Click apply then ok. Copy
protected sharing. network path then close

3.) COMPUTER NAME Check network connectivity

• Start Menu (search control panel, then look SERVER AND CLIENT
for system, then click Change settings, click
• Start Menu (type cmd, type ipconfig, type ping
change then set computer name to server
(IP address of other Computer) click enter
and set workgroup to CSSNCII, then click ok,
• Open File Explorer in the left side click network
close and automatically restart computer.
and check if server and client successful for
4.) Shared Folder network connection.

• Right click desktop, select new, select

folder, type name folder (Server) Right click
II. CONFIGURING NETWORK SERVER
folder, click sharing tab, click share, in add
menu select every one(make sure 1.) INSTALLING DNS and ADDS
permission level is read/write) then share • Click start menu
then click yes then done • Search (server manager)
• Click advance sharing, check box(share this • Click Add roles and features
folder, click permission, click allow • Click next
permission. Click ok. Copy network path • Click next (role-based)
then close • Click next
CLIENT • Click DNS server (add features)
• Click Active Directory Domain Services (add
1.) IP Address features)
Ip Adress (192.168.1.2) • Click next
• Click next
• Start Menu (search control panel, then look • Click nest
for Network and Sharing Center, click • Click next
change adapter settings then, right click • Click install
ethernet, select properties, choose • After installing click promote this server to
(TCP/IPv4), click properties, and let use the domain controller
following ip address (192.168.1.1) on the
• Click Add a new forest
subnet mask click the text box. Then close
• Domain name (CSS.com) (depende sa assessor)
the windows.
• Click next
2.) TURN OFF PASSWORD PROTECTED SHARING • Type password (Css@12345)
• Confirm password (Css@12345)
• Start Menu (search control panel, then look
• Click next
for Network and Sharing Center, click
• Click next
advanced sharing settings, expand all
• Click next
network profile then torn off password
• Click next
protected sharing.
• Click next
3.) COMPUTER NAME • Click install
• Automatically restart computer
• Start Menu (search control panel, then look
for system, then click Change settings, click
2.) CREAT ORGANIZATIONAL UNIT AND USER
• Click start menu • Type the name of scope (myscope)
• Search (server manager) • Click next
• Select Tools • Click starting ip address (192.168.1.2)
• Select Active Directory user and computers • Click ending Ip Address (192.168.1.100)
• Expand domain (ex.CSS.com) • Click next until you reach the finish
• Right click domain (ex.CSS.com)
• Select new 4.) CONNECT/JOIN CLIENT TO DOMAIN NETWORK
• Select organizational unit
Obtain Client IP Adress
• Name: MYORGUNIT
• Click ok • Start Menu (search control panel, then look for
• Right click organizational unit Network and Sharing Center, click change
• Select new adapter settings then, right click ethernet,
• Select user select properties, choose (TCP/IPv4), click
• Type your name properties, click obtain an IP Address, click close
• Type your last name • Start Menu (search control panel, then look for
• Type your user logon name(your first name) system, then click Change settings, click change,
• Then click next click domain
• Password: Css@12345 • Type your domain name (CSS.com)
• Password never expires • Click ok
• Click finish • Type User: administrator
• Do it again for another user • Type Password: Css@12345
• Restart
3.) INSTALL DHCP server (Server) • After restarting
Configure the network server • Click other user
• Start Menu (search control panel, then look for • Type user name (First name)
Network and Sharing Center, click change • Type password (Css@12345)
adapter settings then, right click ethernet, After that go to server pc
select properties, choose (TCP/IPv4), click • Right click the folder in desktop
properties, and copy the ip address to DNS • Select properties
Server, then click ok. • Select sharing then
• Disable and enable network device • Copy network path
• Close • Then close
• Close • Click start menu
• Click start menu • Search (server manager)
• Search (server manager) • Click tools
• Click Add roles and features • Select group policy management
• Click next • Expand forest
• Click next (role-based) • Expand domain
• Click next • Right click org. unit
• Click DHCP server (Add Features) • Select (creat a GPO in this domain)
• Click next • Creat name (CSSGPO)
• Click next • Click ok
• Click restart • Expand Org. unit
• Click yes • Right click GPO created
• Click install • Click edit
• After finishing • Under user configuration
• Click Complete DHCP configuration • Expand policy
• Click next • Expand window setting
• Select use the following user credentials • Expand folder redirection
• Click commit • Select desktop
• Click close • Right click desktop
• Click tools • Select properties
• Click DHCP • Select basic redirection setting
• Expand server • Paste network path to root path
• Right click IPv4 • Click setting
• Select new scope • Uncheck grant the user
• Click next • Check also apply redirection policy
 • Click apply then ok • Type gpupdate
• Do this to picture and music • Then go to printer and devices
After that go to client and make a folder on • Check if the printer is already deploy
desktop, music and picture then check if the
folder is shared to server pc COC 4. MAINTAIN AND REPAIR COMPUTER
SYSTEMS NETWORK
REMOTE DESKTOP (SERVER and CLIENT)

SERVER 2016

• Start Menu (search control panel, then look for

system
• Click Remote settings
• Click allow remote connections
• Ok

CLIENT WINDOWS 10

• Start menu
• Type remote desktop connection
• Type IP Adress of Server (192.168.1.1)
• Use another account (server account)
• Username: administrator
• Password: Css@12345
• Click ok
• Click Yes

PRINTER SHARING AND DEPLOYMENT

SERVER

• Click start menu

• Search (server manager)
• Click Add roles and features
• Click next
• Click next (role-based)
• Click next
• Click print and document services (add features)
• Click next
• Click next
• Click next
• Click install
• After installing
• Click tools
• Select print management
• Expand serverpc (local)
• Click printerds
• Right click printer
• Deploy with group policy management
• Click browse
• Select Org. unit
• Click ok
• Click ok
• Check user that this GPO
• Press add
• Click apply
• Click ok
• Click ok
• After that go to client PC
• Start menu
• Type cmd