Sl. No.

DESCRIPTION UNIT QTY SUPPLY

RATE IN RS

Supplying, fixing, testing and commissioning, Stainless steel sink

with single bowl manufactured from 1 mm thick stainless steel,
18G high grade indestructable chrome 'nickel steel with top
1 quality polish, 1 no. 40 mm dia CP waste coupling, 20mm dia CP
sink pillar tap with swivel spout wall mounted type and necessary
wall flanges etc., complete. Location - Pantries and kitchen , type
of sink to be taken approval from architects and consultants , Sink
should be less than 2 litres per minute at 60 PSI pressure

Sanitaryware :
Size of sink :1000mm x 500mm
Make -Nirali-Grace deluxe
BIG535x460mm(Mat Finish)
CP fittings :
Make : Jaquar
model-5319 sink mixer
Bottle trap : model no- Hindware CAT no. 769
Sink pillar tap with swivelspout - Product code-FLR-CHR-5357N
Angular stop cock with Wall flange : CAT no.5053
PVC connection pipe: viking Nos. 0

Supplying, installing, testing & commissioning of Garbo drain /

2 waste crusher with waste coupling assembly, impeller etc. Nos 0
complete

Supplying, fixing, testing and commissioning, Electric Hand Drier

3 twin blower integrated with timer (0-3 minutes) and infrared Nos. 0
arrangement. The drier shall be fully automatic.

Supplying, Installing, Testing & Commissioning Electric water

heater (geyser) with all controls like Thermostat, 1 no 15mm dia
4 CP angle valve, pressure relief valve, check valve with CP copper
connection pipes with wall flanges of approved make etc.,
complete.
a) 10 lts. Capacity Nos. 0
b) 25 lts. capacity Nos. 0
c) 50 lts. capacity Nos. 0

Supplying, fixing, testing and commissioning, Oval white glazed

wash basin of approved colour below counter,with 32mm dia CP
'waste coupling, 32 mm dia. CP bottle trap with extention pipe,C.I
5 wall brackets with a pair of SS screws to support the basin 1no.
15mm CP pillar cock with casted spout, 2 no. 15mm CP 'angle valve
with 450mm long CP inlet connection pipe, CP wall flange all of
approved make, complete.with complete sensors

Sanitaryware:
Make:Parryware
Model : C0418
 CP fittings : jaquar pillar cock
Make : Jaquar- Continental 021
Bottle trap : Jaquar CAT no. 769
Waste coupling : model no- CAT no. 709
Angular stop cock with Wall flange : CAT no.5053
PVC connection pipe: viking
Nos. 0

Supplying, Installing, testing and commissioning White color wall

mounted type European Water Closet with `P' or `S' trap with PVC
cistern dual flush 3/ 6 lts capacity as per Green requirement , with
all internal parts of the cistern for efficient functioning / flush valve
with matching polypropylene solid hard seat and cover of
approved make with polythene buffers and flap, brass CP wall
6 flanges, brass CP bolts and nuts 15mm brass CP angle valve with
450 mm long inlet (type) connection pipe, all of approved make,
with mounting chair bracket custom made to specific dimensions
as mentioned by the architect / engineer,fixing of 110mm dia
straight type straight syphon UPVC WC pan connector with
neoprene rubber ring and necessary accessories etc., complete.,
toilets are for differently abled people aswell cross check with
consultants before palcing order

Sanitary ware type; Wall mounted

Make:Parryware
WC Model – -Walvit pan - Cardiff
CP fittings
Make:Jaquar
Nos. 0
7 Toilet Accessories
Supplying, fixing, testing and commissioning, CP health faucet
a 15mm dia of approved make with necessary CP flexible hose
750mm long nozzle, CP wall flange complete.
CP fittings :
Make : Jaquar
Model No.- CAT no.573
Angular stop cock: CAT no. 5053
Nos. 0

Supplying, fixing, testing CP toilet paper holder fixed with SS

b screws etc, complete.
Make : Jaquar Range ; continental
Model : CAT no.1553
Nos. 0

Supplying, fixing, testing CP double coathook fixed on to toilet

c doorswith SS screws complete.
CP fittings :
Make : Jaquar Range ; continental
Model : CAT no.1161
Nos. 0
Supplying, fixing, testing soap dispenser ( ABS) with necessary SS
d screws, etc complete
 fixing screws and clamps etc., complete.
Make : Kimberly - Clark
Nos. 2

Supply and fixing of approved make starwhite coloured urinal with

8 Sensor including CP brass waste with dome type grating, CP cast
brass bottle trap with extension piece and wall flanges complete.

Particular
Urinal : URS-WHT-13257
Bottle Trap: Noway p traps- NW-040-A
Urinal sensor : Aquasense SNR-CHR-51077
Nos. 0

Supply and fixing, Premium Aluminum Material: Reliable grab bar

made of high quality aluminum alloy thicken material for lasting
performance, stainless steel screws for corrosion resistance,
provides a safe and steady handhold on the toilet or in the
bathroom.
Flip-up & Space-saving: The folding grab bar can 90° vertically flip
9 up and rest against the wall when it is not in use, Nos. 0
bar shall be 2.0 mm in thickness and 25.4 mm in diameter, this
grab bar wrapped by black foam fits hands of all sizes, supports up
to 120 kgs. approximately, ensures non-slip grip, no cool hands.
Scope includes complete screws hardwares and neccessary
support . Makes , Kosmocare , Dolphy or equivalent

Supplying, fixing, testing and commissioning of CP 20mm dia

10 600mm long towel rail with necessary SS screws, CP end clamps
etc.complete.
Make : Jaquar Range ; continental
Model : CAT no.1181 Nos. 0

Supplying,Installing, testing and commissioning of 2 in 1 CP Wall

Mixer with provision for overhead shower comprising of CP
11 shower arm, shower rose,with CP wall flanges, for mixer as well as
overhead shower etc., complete.
Make : Jaquar Range ; continental
Jaquar-Continental 273 Nos. 0

Supplying, Installing, testing and commissioning Dual flow metro

12 flush valve conc 32mm- Jaquar
FLV-CHR-1085 Nos. 0

Supply, Installation, testing and commissioning of Water flow

13 meter for 25mm Dia pipe make kamstrup Nos 0

Supply Of Grundfos Pressure Booster Pump

14 Model - CMB 10-37 (CM 10-2) with 60 Ltrs tank Single Phase Nos 0
 dismantling & shifting of existing RO to a new location in same
15 floor with necessary ancillaires supports and hardwares Lot 0

Supplying, Installation testing and commissioning, Kent Elite -100

16 Ltr/Hour, 500 Litre/Day With dual dispensing taps, suitable Nos 0
instrumentatiion and control cabling

Supplying, Installation testing and commissioning of water purifier

(RO+UV+UF+TDS )-25Ltr/Hour, 500 Litre/Day tank -25 Litre
17 storage. With water level sensors ,suitable instrumentatiion and Nos 0
control cabling

T O T A L - PART I

II INTERNAL SEWERAGE SYSTEM - SOIL, WASTE, VENT, PIPES

Please note all the pipes should be low noise pipes

Supply and fixing, of PVC soil, waste and vent pipes (SWR)
confirming to IS13592 : 1990, type B with rubber ring (confirming
to IS 5382) 6kg/sqcm with solvent joint inclusive of all necessary
specials like bends, tees, offsets, doorbends, junctions, screw type
1 caps with rubber rings for cleanout pipe ends, etc., suspended
under floor slabs/fixed on walls or on pipe racks in shafts. All
suspenders, saddles, pipe packs are to be quoted separately under
relevant items.( Inclusive of verticals & horizontals at Internal
Toilets ) ,

75mm dia , Rmt 70

110mm dia Rmt 5
160mm dia Rmt 0

Supply and fixing, of PVC pressure pipes (6Kg/sqcm) confirming to

IS 4985 for waste connection from wash basin, kitchen sinks to
floor trap, antisyphonage/vent pipe with solvent cement joints,
2 including all the fittings, suspended under floor slabs/concealed in
wall etc, the work shall include wall chase and making good the
same in cement mortar. All suspenders, saddles , pipe packs are to
be quoted separately under relevant items.

40mm dia (I.D.) Rmt 15

50mm dia (I.D.) Rmt 5
65mm dia (I.D.) Rmt 0

Supply and fixing, of Approved make PVC vent cowl for pipes
3 ending above roof levels with necessary accessories etc., complete.

75mm dia Nos 0

110 mm dia. Nos 0
160 mm dia. Nos 0
200 mm dia. Nos 0
 Supplying, installing,testing and commissioning pipe clean outs
fabricated from heavy duty PVC pipe for waste and soil lines for
4 effective maintenance, laid at the dead end side of header pipe
pluged and opening type ., complete
75mm dia Nos 6
110mm dia Nos 0

Supply and fixing, of PVC " floor trap" with (heavy duty hinged
type) brass CP grating frame and cover (150mm x 150mm). Trap of
5 100mm dia. Inlet and 75mm dia outlet jointed to drainage pipes Nos. 0
and seated firmly in sleeves provided in slab and grouting the joint
between rim of the floor trap and concrete with suitable silicone
sealants.

Supply and fixing, of PVC "P-trap" with (heavy duty hinged type)
brass CP grating frame and cover (150mm x 150mm). Trap of
6 100mm dia. Inlet and 75mm dia outlet jointed to drainage pipes Nos. 0
and seated firmly in sleeves provided in slab and grouting the joint
between rim of the floor trap and concrete with suitable silicone
sealants.

Supply and fixing, of MS slotted angle iron brackets, MS threaded

hangers and supports with necessary drilling holes to suit the
insertion of pipe clamps, as per approved fabrication drawings, for
7 supporting soil, waste and rain water pipes and water supply pipes Kgs. 60
in shafts with suitable MS clamps, bolts, anchor bolts nuts and
washers fixed on shaft walls and suspended under floors. The
quoted rate shall include painting all steel members with one coat
of primer and two coats of enamel paint etc complete.

Drilling with core cutting machine in RCC beams, slabs floors etc.,
for laying pipes and rendering the same in RCC 1:2:4, finishing the
8 same to the satisfaction of the Engineer., including nominal
reinforcement wherever required.

in RCC beams
25mm dia upto 50 mm dia.pipes. Nos. 0
50mm dia upto 90mm dia.pipes. Nos. 0
110mm dia. upto 160 mm dia.pipes. Nos. 0

in RCC slabs
25mm dia upto 50 mm dia. Pipes. Nos. 0
50mm dia upto 90 mm dia. Pipes. Nos. 0
110mm dia. upto 160 mm dia. Pipes Nos. 0

in RCC walls
25mm dia upto 50 mm dia. Pipes. Nos. 0
50mm dia upto 90 mm dia. Pipes. Nos. 0
110mm dia. upto 160 mm dia. Pipes. Nos. 0
 Supplying, Installing, testing and commissioning of ACO/Kessel
9.1 Grease Separator for Free Standing Installation- NS 0.8- 0.8ltrs per Set 0
second capacity - Compact modular type-Manual type

Supplying, Installing, testing and commissioning of ACO/Kessel

9.2 Grease Separator for Free Standing Installation- NS 0.4- 0.4ltrs per Set 0
second capacity - Compact modular type-Manual type

SITC of 3mm thick SS 316 O&G( Oil & Grease ) Trap of overall size
900mm length x 600mm width x 600 mm height, with two
9.3 perforated baffle walls having 6mm perforation, 112mm inlet and Set 0
112mm outlet, 156lit holding capacity, 45 kg grease holding
capacity,189 litres per minute , with SS 316 openable cover,
tightening screws, complete make & model NGT 100

Providing, fixing, jointing, testing and commissioning spun / centri

CI pipe for kitchen waste pipes installation conforming to IS:3989
cut to required lengths including all necessary fittings and specials
such as Bends, junctions, offsets, access pieces (plain or door) &
vent cowl. Fixing at wall/ceiling level supported by galvanized steel
10 clamps & hangers etc. Making proper connection with drip seal
joint of required depth as per BIS / manufacturer. Cutting, chases /
holes in floors / walls / slab, excavation, refilling watering, disposal
of surplus earth, making connection to manholes, making the walls
and floors good.laid under floor/ fixed on walls on G.I. brackets
with 'U' clamps in pipe shafts etc., complete.

a)80mm dia , Rmt 0

b)100mm dia Rmt 0

Supplying, fixing and testing C.I P trap with extension pipe, with
brass CP frame & cover (150 mm x 150 mm square / 125 mm
11 round). Trap of 100 mm dia. Inlet and 75 mm dia outlet fixed on a Nos 0
bed of cement concrete etc., complete. (The frame and grating
shall be approved by Architects)

Supply, Installation, testing and commissioning of Compact

modular drain pumping system with inbuilt tank, Two pump sets-1
12.1 Working +1 Standby -1 Hp Motor, to deliver 11m head at flow of Nos 1
150 LPM, With complete logic system , Alarm , Necessary control
wiring - Complete set - Make Sanicom-2

Supply, Installation, testing and commissioning of Compact

modular drain pumping system with inbuilt tank, Two pump sets-1
12.2 Working +1 Standby -1 Hp Motor, to deliver 11m head at flow of Nos 0
150 LPM, With complete logic system , Alarm , Necessary control
wiring - Complete set - Make Sanicubic-2
 Supply, Installation, testing and commissioning of Compact
12.2 modular drain pumping system with inbuilt tank, to deliver 8.5m Nos 0
head at flow of 1.67LPS, With complete logic system , Alarm ,
Necessary control wiring - Complete set - Make Sololift C3

Supply, Installation Testing and Commissioning of 25 Ltr Electric

13 power Geyser complete protections Nos 0

Supply ,laying,testing & commissing of heavy quility SS 304 Grating

of thickness 38MM with MS angle runners including fixing with
14 hold fast applaying three coats of anti corrosive Bitumastic paint
etc complete and as directed
3'-6" X 12"size and 38mm thick Nos 0
T O T A L - PART II

III INTERNAL WATER SUPPLY SYSTEM

Please note all the pipes should be low noise pipes

Supplying, installing, fixing, jointing, testing and commissioning of

approved make Chlorinated Polyvinyl Chloride pipes (CPVC)
SDR.11 pipes confirming to ASTM standards with necessary
fittings, and above 50mm dia pipe fitting shall be schedule 40
ASTM IPS. The fittings and specials such as tees, elbows,couplers,
bends, enlargers etc.,m with CPVC brass threaded combination /
1 transition specials such as male adapters brass threaded female
adapters, brass FPT Tee, Brass FPT elbow etc., where connection
with metal is to be made including necessary drilling holes, chasing
walls and making the same good in cement martor 1:1 restore the
same original condition neately as directed by the Engineer in-
charge.Joints to be made with CPVC solvent cement up to 50mm
dia as per ASTM D-2846 and above 50mm dia primer P-70, and
solvent confirming to ASTM F-4931 / 724 (internal piping)

a) 15 mm dia Rmt 0
b) 20 mm dia Rmt 5
c) 25 mm dia Rmt 15
d) 32 mm dia Rmt 70
e) 40 mm dia Rmt 0
f) 50 mm dia Rmt 0

Supplying, and fixing, GM ball valves conforming to IS 1703 with

2 necessary connecting fittings like flanges, nuts and bolts etc.,
complete.
20 mm dia (Screwed ends) Nos. 0
25 mm dia (Screwed ends) Nos. 3
32 mm dia (Screwed ends) Nos. 1
40 mm dia (Screwed ends) Nos. 0
50 mm dia (Screwed ends) Nos. 0

Supplying, and fixing, GM non return valves conforming to IS 1703

3 with necessary connecting fittings like flanges, nuts and bolts etc., Nos. 0
complete. Dia of 40mm
 Supplying, and fixing, Y strainer conforming to IS 1703 with
4 necessary connecting fittings like flanges, nuts and bolts etc., Nos. 0
complete.

Supplying, installing, testing and commissioning of GI Class C Pipe

heavy grade with threaded fittngs for hot water supply
confirming to ASTM standard including all GI fittings like tees,
elbows, bends, unions, coupling, reducer tees, collars, etc. Also
insulation for hot water pipes. Insulation of GI Pipe with
Elastomeric tube for insulation with 9mm thick Class O material
5 The work shall include making holes, including chasing in solid
block masonry walls with groove cutting machine to required
width and depth, making opening in walls, , making good the walls
and bores in CC or CM 1:3 as applicable clearing the debris,
grouting of concealed pipes, MS hooks for fixing pipes and making
good the walls and floors.

a) 20 mm dia Rmt 5
b) 25 mm dia Rmt 0

6 Supply and laying of dia 19mm flexible hose with nipple Nos 0
0
7 Supply and laying of dia 13mm flexible hose with nipple Nos 0

8 Pipe modifcation to tap our floor piping to the builder's pipes Lot 0

T O T A L - PART III

IV ALTERATION WORKS
Modification works, for modifying SWR and PVC/CPVC water
1 pipelines with minimum alteration works 80 rmt Lot 1

T O T A L - PART IV
INSTALLATION SUPPLY INSTALLATION TOTAL AMOUNT
RATE IN RS AMOUNT IN RS AMOUNT IN RS IN RS

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

- - -

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

- - -

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

- - -

0.00 0.00 0.00

- - -
Sl. No. DESCRIPTION UNIT QTY SUPPLY
RATE IN RS

Supplying, fixing, testing and commissioning, Stainless steel sink

with single bowl manufactured from 1 mm thick stainless steel,
18G high grade indestructable chrome 'nickel steel with top
1 quality polish, 1 no. 40 mm dia CP waste coupling, 20mm dia CP
sink pillar tap with swivel spout wall mounted type and necessary
wall flanges etc., complete. Location - Pantries and kitchen , type
of sink to be taken approval from architects and consultants , Sink
should be less than 2 litres per minute at 60 PSI pressure

Sanitaryware :
Size of sink :1000mm x 500mm
Make -Nirali-Grace deluxe
BIG535x460mm(Mat Finish)
CP fittings :
Make : Jaquar
model-5319 sink mixer
Bottle trap : model no- Hindware CAT no. 769
Sink pillar tap with swivelspout - Product code-FLR-CHR-5357N
Angular stop cock with Wall flange : CAT no.5053
PVC connection pipe: viking Nos. 0

Supplying, installing, testing & commissioning of Garbo drain /

2 waste crusher with waste coupling assembly, impeller etc. Nos 0
complete

Supplying, fixing, testing and commissioning, Electric Hand Drier

3 twin blower integrated with timer (0-3 minutes) and infrared Nos. 0
arrangement. The drier shall be fully automatic.

Supplying, Installing, Testing & Commissioning Electric water

heater (geyser) with all controls like Thermostat, 1 no 15mm dia
4 CP angle valve, pressure relief valve, check valve with CP copper
connection pipes with wall flanges of approved make etc.,
complete.
a) 10 lts. Capacity Nos. 0
b) 25 lts. capacity Nos. 0
c) 50 lts. capacity Nos. 0

Supplying, fixing, testing and commissioning, Oval white glazed

wash basin of approved colour below counter,with 32mm dia CP
'waste coupling, 32 mm dia. CP bottle trap with extention pipe,C.I
5 wall brackets with a pair of SS screws to support the basin 1no.
15mm CP pillar cock with casted spout, 2 no. 15mm CP 'angle valve
with 450mm long CP inlet connection pipe, CP wall flange all of
approved make, complete.with complete sensors

Sanitaryware:
Make:Parryware
Model : C0418
 CP fittings : jaquar pillar cock
Make : Jaquar- Continental 021
Bottle trap : Jaquar CAT no. 769
Waste coupling : model no- CAT no. 709
Angular stop cock with Wall flange : CAT no.5053
PVC connection pipe: viking
Nos. 0

Supplying, Installing, testing and commissioning White color wall

mounted type European Water Closet with `P' or `S' trap with PVC
cistern dual flush 3/ 6 lts capacity as per Green requirement , with
all internal parts of the cistern for efficient functioning / flush valve
with matching polypropylene solid hard seat and cover of
approved make with polythene buffers and flap, brass CP wall
6 flanges, brass CP bolts and nuts 15mm brass CP angle valve with
450 mm long inlet (type) connection pipe, all of approved make,
with mounting chair bracket custom made to specific dimensions
as mentioned by the architect / engineer,fixing of 110mm dia
straight type straight syphon UPVC WC pan connector with
neoprene rubber ring and necessary accessories etc., complete.,
toilets are for differently abled people aswell cross check with
consultants before palcing order

Sanitary ware type; Wall mounted

Make:Parryware
WC Model – -Walvit pan - Cardiff
CP fittings
Make:Jaquar
Nos. 0
7 Toilet Accessories
Supplying, fixing, testing and commissioning, CP health faucet
a 15mm dia of approved make with necessary CP flexible hose
750mm long nozzle, CP wall flange complete.
CP fittings :
Make : Jaquar
Model No.- CAT no.573
Angular stop cock: CAT no. 5053
Nos. 0

Supplying, fixing, testing CP toilet paper holder fixed with SS

b screws etc, complete.
Make : Jaquar Range ; continental
Model : CAT no.1553
Nos. 0

Supplying, fixing, testing CP double coathook fixed on to toilet

c doorswith SS screws complete.
CP fittings :
Make : Jaquar Range ; continental
Model : CAT no.1161
Nos. 0
Supplying, fixing, testing soap dispenser ( ABS) with necessary SS
d screws, etc complete
 fixing screws and clamps etc., complete.
Make : Kimberly - Clark
Nos. 2

Supply and fixing of approved make starwhite coloured urinal with

8 Sensor including CP brass waste with dome type grating, CP cast
brass bottle trap with extension piece and wall flanges complete.

Particular
Urinal : URS-WHT-13257
Bottle Trap: Noway p traps- NW-040-A
Urinal sensor : Aquasense SNR-CHR-51077
Nos. 0

Supply and fixing, Premium Aluminum Material: Reliable grab bar

made of high quality aluminum alloy thicken material for lasting
performance, stainless steel screws for corrosion resistance,
provides a safe and steady handhold on the toilet or in the
bathroom.
Flip-up & Space-saving: The folding grab bar can 90° vertically flip
9 up and rest against the wall when it is not in use, Nos. 0
bar shall be 2.0 mm in thickness and 25.4 mm in diameter, this
grab bar wrapped by black foam fits hands of all sizes, supports up
to 120 kgs. approximately, ensures non-slip grip, no cool hands.
Scope includes complete screws hardwares and neccessary
support . Makes , Kosmocare , Dolphy or equivalent

Supplying, fixing, testing and commissioning of CP 20mm dia

10 600mm long towel rail with necessary SS screws, CP end clamps
etc.complete.
Make : Jaquar Range ; continental
Model : CAT no.1181 Nos. 0

Supplying,Installing, testing and commissioning of 2 in 1 CP Wall

Mixer with provision for overhead shower comprising of CP
11 shower arm, shower rose,with CP wall flanges, for mixer as well as
overhead shower etc., complete.
Make : Jaquar Range ; continental
Jaquar-Continental 273 Nos. 0

Supplying, Installing, testing and commissioning Dual flow metro

12 flush valve conc 32mm- Jaquar
FLV-CHR-1085 Nos. 0

Supply, Installation, testing and commissioning of Water flow

13 meter for 25mm Dia pipe make kamstrup Nos 0

Supply Of Grundfos Pressure Booster Pump

14 Model - CMB 10-37 (CM 10-2) with 60 Ltrs tank Single Phase Nos 0
 dismantling & shifting of existing RO to a new location in same
15 floor with necessary ancillaires supports and hardwares Lot 0

Supplying, Installation testing and commissioning, Kent Elite -100

16 Ltr/Hour, 500 Litre/Day With dual dispensing taps, suitable Nos 0
instrumentatiion and control cabling

Supplying, Installation testing and commissioning of water purifier

(RO+UV+UF+TDS )-25Ltr/Hour, 500 Litre/Day tank -25 Litre
17 storage. With water level sensors ,suitable instrumentatiion and Nos 0
control cabling

T O T A L - PART I

II INTERNAL SEWERAGE SYSTEM - SOIL, WASTE, VENT, PIPES

Please note all the pipes should be low noise pipes

Supply and fixing, of PVC soil, waste and vent pipes (SWR)
confirming to IS13592 : 1990, type B with rubber ring (confirming
to IS 5382) 6kg/sqcm with solvent joint inclusive of all necessary
specials like bends, tees, offsets, doorbends, junctions, screw type
1 caps with rubber rings for cleanout pipe ends, etc., suspended
under floor slabs/fixed on walls or on pipe racks in shafts. All
suspenders, saddles, pipe packs are to be quoted separately under
relevant items.( Inclusive of verticals & horizontals at Internal
Toilets ) ,

75mm dia , Rmt 70

110mm dia Rmt 5
160mm dia Rmt 0

Supply and fixing, of PVC pressure pipes (6Kg/sqcm) confirming to

IS 4985 for waste connection from wash basin, kitchen sinks to
floor trap, antisyphonage/vent pipe with solvent cement joints,
2 including all the fittings, suspended under floor slabs/concealed in
wall etc, the work shall include wall chase and making good the
same in cement mortar. All suspenders, saddles , pipe packs are to
be quoted separately under relevant items.

40mm dia (I.D.) Rmt 15

50mm dia (I.D.) Rmt 5
65mm dia (I.D.) Rmt 0

Supply and fixing, of Approved make PVC vent cowl for pipes
3 ending above roof levels with necessary accessories etc., complete.

75mm dia Nos 0

110 mm dia. Nos 0
160 mm dia. Nos 0
200 mm dia. Nos 0
 Supplying, installing,testing and commissioning pipe clean outs
fabricated from heavy duty PVC pipe for waste and soil lines for
4 effective maintenance, laid at the dead end side of header pipe
pluged and opening type ., complete
75mm dia Nos 6
110mm dia Nos 0

Supply and fixing, of PVC " floor trap" with (heavy duty hinged
type) brass CP grating frame and cover (150mm x 150mm). Trap of
5 100mm dia. Inlet and 75mm dia outlet jointed to drainage pipes Nos. 0
and seated firmly in sleeves provided in slab and grouting the joint
between rim of the floor trap and concrete with suitable silicone
sealants.

Supply and fixing, of PVC "P-trap" with (heavy duty hinged type)
brass CP grating frame and cover (150mm x 150mm). Trap of
6 100mm dia. Inlet and 75mm dia outlet jointed to drainage pipes Nos. 0
and seated firmly in sleeves provided in slab and grouting the joint
between rim of the floor trap and concrete with suitable silicone
sealants.

Supply and fixing, of MS slotted angle iron brackets, MS threaded

hangers and supports with necessary drilling holes to suit the
insertion of pipe clamps, as per approved fabrication drawings, for
7 supporting soil, waste and rain water pipes and water supply pipes Kgs. 60
in shafts with suitable MS clamps, bolts, anchor bolts nuts and
washers fixed on shaft walls and suspended under floors. The
quoted rate shall include painting all steel members with one coat
of primer and two coats of enamel paint etc complete.

Drilling with core cutting machine in RCC beams, slabs floors etc.,
for laying pipes and rendering the same in RCC 1:2:4, finishing the
8 same to the satisfaction of the Engineer., including nominal
reinforcement wherever required.

in RCC beams
25mm dia upto 50 mm dia.pipes. Nos. 1
50mm dia upto 90mm dia.pipes. Nos. 1
110mm dia. upto 160 mm dia.pipes. Nos. 1

in RCC slabs
25mm dia upto 50 mm dia. Pipes. Nos. 1
50mm dia upto 90 mm dia. Pipes. Nos. 1
110mm dia. upto 160 mm dia. Pipes Nos. 1

in RCC walls
25mm dia upto 50 mm dia. Pipes. Nos. 1
50mm dia upto 90 mm dia. Pipes. Nos. 1
110mm dia. upto 160 mm dia. Pipes. Nos. 1
 Supplying, Installing, testing and commissioning of ACO/Kessel
9.1 Grease Separator for Free Standing Installation- NS 0.8- 0.8ltrs per Set 0
second capacity - Compact modular type-Manual type

Supplying, Installing, testing and commissioning of ACO/Kessel

9.2 Grease Separator for Free Standing Installation- NS 0.4- 0.4ltrs per Set 0
second capacity - Compact modular type-Manual type

SITC of 3mm thick SS 316 O&G( Oil & Grease ) Trap of overall size
900mm length x 600mm width x 600 mm height, with two
9.3 perforated baffle walls having 6mm perforation, 112mm inlet and Set 0
112mm outlet, 156lit holding capacity, 45 kg grease holding
capacity,189 litres per minute , with SS 316 openable cover,
tightening screws, complete make & model NGT 100

Providing, fixing, jointing, testing and commissioning spun / centri

CI pipe for kitchen waste pipes installation conforming to IS:3989
cut to required lengths including all necessary fittings and specials
such as Bends, junctions, offsets, access pieces (plain or door) &
vent cowl. Fixing at wall/ceiling level supported by galvanized steel
10 clamps & hangers etc. Making proper connection with drip seal
joint of required depth as per BIS / manufacturer. Cutting, chases /
holes in floors / walls / slab, excavation, refilling watering, disposal
of surplus earth, making connection to manholes, making the walls
and floors good.laid under floor/ fixed on walls on G.I. brackets
with 'U' clamps in pipe shafts etc., complete.

a)80mm dia , Rmt 0

b)100mm dia Rmt 0

Supplying, fixing and testing C.I P trap with extension pipe, with
brass CP frame & cover (150 mm x 150 mm square / 125 mm
11 round). Trap of 100 mm dia. Inlet and 75 mm dia outlet fixed on a Nos 0
bed of cement concrete etc., complete. (The frame and grating
shall be approved by Architects)

Supply, Installation, testing and commissioning of Compact

modular drain pumping system with inbuilt tank, Two pump sets-1
12.1 Working +1 Standby -1 Hp Motor, to deliver 11m head at flow of Nos 1
150 LPM, With complete logic system , Alarm , Necessary control
wiring - Complete set - Make Sanicom-2

Supply, Installation, testing and commissioning of Compact

modular drain pumping system with inbuilt tank, Two pump sets-1
12.2 Working +1 Standby -1 Hp Motor, to deliver 11m head at flow of Nos 0
150 LPM, With complete logic system , Alarm , Necessary control
wiring - Complete set - Make Sanicubic-2
 Supply, Installation, testing and commissioning of Compact
12.2 modular drain pumping system with inbuilt tank, to deliver 8.5m Nos 0
head at flow of 1.67LPS, With complete logic system , Alarm ,
Necessary control wiring - Complete set - Make Sololift C3

Supply, Installation Testing and Commissioning of 25 Ltr Electric

13 power Geyser complete protections Nos 0

Supply ,laying,testing & commissing of heavy quility SS 304 Grating

of thickness 38MM with MS angle runners including fixing with
14 hold fast applaying three coats of anti corrosive Bitumastic paint
etc complete and as directed
3'-6" X 12"size and 38mm thick Nos 0
T O T A L - PART II

III INTERNAL WATER SUPPLY SYSTEM

Please note all the pipes should be low noise pipes

Supplying, installing, fixing, jointing, testing and commissioning of

approved make Chlorinated Polyvinyl Chloride pipes (CPVC)
SDR.11 pipes confirming to ASTM standards with necessary
fittings, and above 50mm dia pipe fitting shall be schedule 40
ASTM IPS. The fittings and specials such as tees, elbows,couplers,
bends, enlargers etc.,m with CPVC brass threaded combination /
1 transition specials such as male adapters brass threaded female
adapters, brass FPT Tee, Brass FPT elbow etc., where connection
with metal is to be made including necessary drilling holes, chasing
walls and making the same good in cement martor 1:1 restore the
same original condition neately as directed by the Engineer in-
charge.Joints to be made with CPVC solvent cement up to 50mm
dia as per ASTM D-2846 and above 50mm dia primer P-70, and
solvent confirming to ASTM F-4931 / 724 (internal piping)

a) 15 mm dia Rmt 0
b) 20 mm dia Rmt 5
c) 25 mm dia Rmt 15
d) 32 mm dia Rmt 70
e) 40 mm dia Rmt 0
f) 50 mm dia Rmt 0

Supplying, and fixing, GM ball valves conforming to IS 1703 with

2 necessary connecting fittings like flanges, nuts and bolts etc.,
complete.
20 mm dia (Screwed ends) Nos. 0
25 mm dia (Screwed ends) Nos. 3
32 mm dia (Screwed ends) Nos. 1
40 mm dia (Screwed ends) Nos. 0
50 mm dia (Screwed ends) Nos. 0

Supplying, and fixing, GM non return valves conforming to IS 1703

3 with necessary connecting fittings like flanges, nuts and bolts etc., Nos. 0
complete. Dia of 40mm
 Supplying, and fixing, Y strainer conforming to IS 1703 with
4 necessary connecting fittings like flanges, nuts and bolts etc., Nos. 0
complete.

Supplying, installing, testing and commissioning of GI Class C Pipe

heavy grade with threaded fittngs for hot water supply
confirming to ASTM standard including all GI fittings like tees,
elbows, bends, unions, coupling, reducer tees, collars, etc. Also
insulation for hot water pipes. Insulation of GI Pipe with
Elastomeric tube for insulation with 9mm thick Class O material
5 The work shall include making holes, including chasing in solid
block masonry walls with groove cutting machine to required
width and depth, making opening in walls, , making good the walls
and bores in CC or CM 1:3 as applicable clearing the debris,
grouting of concealed pipes, MS hooks for fixing pipes and making
good the walls and floors.

a) 20 mm dia Rmt 5
b) 25 mm dia Rmt 1

6 Supply and laying of dia 19mm flexible hose with nipple Nos 1
1
7 Supply and laying of dia 13mm flexible hose with nipple Nos 1

8 Pipe modifcation to tap our floor piping to the builder's pipes Lot 1

T O T A L - PART III

IV ALTERATION WORKS
Modification works, for modifying SWR and PVC/CPVC water
1 pipelines with minimum alteration works 80 rmt Lot 1

T O T A L - PART IV
INSTALLATION SUPPLY INSTALLATION TOTAL AMOUNT
RATE IN RS AMOUNT IN RS AMOUNT IN RS IN RS

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

- - -

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

- - -

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

- - -

0.00 0.00 0.00

- - -