Plumbing BOQ
Plumbing BOQ
Plumbing BOQ
2020
PROJECT :PROPOSED MULTI SPECIALITY KEMPANNA HOSPITAL AT HOSKOTE.
** S U M M A R Y **
PART A
I SANITARY FIXTURES AND CP FITTINGS -
(FIXING CHARGES ONLY)
PART B
CPVC PIPES AND FITTNGS (INTERNAL AND EXTERNAL
II WATERSUPPLY) -
PART C
III PVC SOIL, WASTE, VENT PIPE & FITTINGS (INTERNAL AND -
EXTERNAL DRAINAGE SYSTEM)
PART D
IV PVC RAIN WATER PIPES AND FITTINGS -
TOTAL -
Rev-00
Date :
NOTE :
Supply:
Fixing: Nos. 21
Shower Area
Collecting , fixing, testing and commissioning of shower
assembly units consisting of single lever divertor, overhead
07 shower ,Hand shower and Spout including all the necessary
accessories etc.
Supply:
Fixing: Nos. 11
Supply:
Fixing: Nos. 11
Supply:
Fixing: Nos. 11
Kitchen area
Collecting, fixing, testing and commissioning of best quality
approved make stainless steel single bowl and Single Drain
11 board made of 18 gauge sheet 40mm dia CP waste coupling,
40mm PVC waste pipe etc, complete.
Supply:
Fixing: Nos. 02
Note: Strictly use SDR-11 grade CPVC pipe and fittings for
internal cold and hot water supply up to 50 mm dia and also
Rate Quoted shall be inclusive of cost of other consumables like
hacksaw blade, solvent (Adhesive solution yellow colour) for
CPVC pipe of make up to 50 mm dia etc..
Notes: Strictly use SDR - 11 grade CPVC pipe and fittings for
external cold water supply pipe up to 50 mm dia and also Rate
Quoted shall be inclusive of cost of other consumables like
hacksaw blade, solvent (Adhesive solution yellow colour) for
CPVC pipe of make up to 50 mm dia etc..
Providing and fixing cast iron lever operated slim seal type
butterfly valves of CI body and spheroidal graphite iron disc (SG
iron),with nitrile rubber seal, tested to 10 kg / sq.cm Confrming
04
to BS 5155 / MF6 standards and including a set of GI flanges as
per BS-10 table 1 including bolt nuts, and Neoprene rubber
gaskets etc.,Complete
Notes:
Rate Quoted shall be inclusive of cost of other consumables like
a) hacksaw blade, oil, cotton thread etc.
50 mm dia Supply: Nos. 02
Fixing : Nos. 02
Providing & fixing slimseal flap type check valve with CI body and
cast steel disc pressure rating PN-10 Kg / sq.cm including a set of
04
GI flanges as per BS-10 table 1 including bolt nuts, GI washers,
and neoprene rubber gaskets Complete etc.
Notes:Rate Quoted shall be inclusive of cost of other consumables
like hacksaw blade, oil, cotton thread etc.
a) 32 mm dia
Supply &Fixing: Nos. 02
Providing & fixing of Brass `Y' / pot stainer screw type tested to
08
20 kg / sq.cm.
a) 32 mm dia
Supply &Fixing: Nos. 01
b) 50 mm dia
Supply &Fixing: Nos. 01
11 Providing and fixing plastic ball float valve with gun metal lever
a 25 mm dia
Supply: Nos. 01
Installation: Nos. 01
b 32 mm dia
Supply: Nos. 03
Installation: Nos. 03
c 40 mm dia
Supply: Nos. 01
Installation: Nos. 01
d 50 mm dia
Supply: Nos. 03
Installation: Nos. 03
e 100 mm dia
Supply: Nos. 02
Installation: Nos. 02
No. 20
a) 75mm dia
Supply &Fixing: Mtr. 08
b) 110mm dia
Supply &Fixing: Mtr. 08
c) 160 mm dia (6kg / sq.cm)
Supply &Fixing: Mtr. 25
PART -C TOTAL
PART – D: PVC RAIN WATER PIPES AND FITTINGS
Providing ,fixing, testing and commissioning of PVC rain water
pipe confirming to IS 13592 of SWR quality 4 kg / sq.cm pressure
rated 10mm, including all fittings, like Bends, Tees, Elbows,
Collars, junction, inspection doors, cowls, offsets, access pipes,
01 jointing with rubber ring / solvent cement followed by
application of leak proof adhesive like FRP paste, fixed to wall
with properly fabricated MS bracket of suitable size, GI 'U'
clamps with bolts, nuts and GI washers complete, for rain water
pipe lines laid in vertical shafts.
Notes:
Rate Quoted shall be inclusive of cost of other consumables like
hacksaw blade solvent cement etc.
a) 110mm dia
Supply &Fixing: Mtr. 70
SL.
NO ITEM DESCRIPTION COLOUR MAKE CAT. NO
I SANITARY WARE: AS PER CLIENT
III OTHERS:
09 STONE WARE PIPES AND GULLY TRAPS (ISI) MYSORE STONE WARE / TSL