Nothing Special   »   [go: up one dir, main page]

EagleBurgmann CobaSeal EN

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Mechanical seals | Compressor seals | Separation seals

CobaSeal

Operating range Recommended applications


Shaft diameter: Oil and gas industry
29.5 ... 210 mm (1.16" ... 8.27") Refining technology
Design pressure (vent): Petrochemical industry
p = 0 … 15 bar (0 ... 218 PSI) Nitrogen
Operating pressure: Air
p = 2.7 bar (39.16 PSI) Temperature: Centrifugal compressors
t = -20 °C … +150 °C (-4 °F … +302 °F) Blowers
Sliding velocity:
vg = 0 ... 150 m/s (0 ... 492 ft/s)
Dew point: No limitation Notes
Since it was launched on the market, this
innovative sealing solution has proven its worth
Materials worldwide in both first fit and retrofit
Features Seal face: Silicon carbide* applications. It consists of a rotating seat made
Seat: Ductile stainless steel* of ductile material and a stationary, spring-
Gas-lubricated Secondary seals: FKM loaded seal face. The separation gas is routed
Bi-directional Metal parts: 1.4006 through axial holes in the stationary seal ring
Ready-to-fit cartridge unit into the middle of the sliding face. It is then
Self cleaning 3D gas grooves * With special EagleBurgmann high divided in the sealing gap into two leakage flows
Aerostatic and aerodynamic lift-off performance iDLC (in situ Diamond-Like- which are routed to the inner and outer
Carbon) coating diameters of the seal face.
Advantages
Dimensions on request.
Extremely low leakage Standards and approvals
Double arranged (co-axial) dry gas seal with NACE
just one pair of seal faces
Insensitive to oil contamination due to its
special design
Wear-free, non-contacting operation in all
conditions
Insensitive to radial vibrations due to axial
sealing gap
Slow-roll or turning operation capable (static
lift-off)
No limits regarding dew point of separation
gas (silicon carbide instead of carbon)
Lower N2 consumption than any other
system
N2 can be switched off during standstill - the
gap will close and still provide the best oil
sealing performance
Best in class oil sealing by extremely small
sealing gap and sling effect of rotating ring

All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means, 21.07 2015 © EagleBurgmann
however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any www.eagleburgmann.com
guarantee for a specific case. Subject to change.
Mechanical seals | Compressor seals | Separation seals Page 2/3

Item Description
1 Seal face, stationary
2 Seat, rotating
3 Thrust ring
4 Spring
5 Shaft sleeve and seat retainer
6 Housing (size matched to installation
space)
D Separation gas

Installation, Details, Options

Piping and instrumentation diagram of a


CobaSeal (pressure controlled separating gas
supply).
Alternative solution: Differential pressure
control for safe regulation of the separating
gas pressure in any operating condition.

All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means, 21.07 2015 © EagleBurgmann
however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any www.eagleburgmann.com
guarantee for a specific case. Subject to change.
Mechanical seals | Compressor seals | Separation seals Page 3/3

Product variants

Option:
Single DGS + CobaSeal = Tandem seal

The CobaSeal is not just an excellent


separation seal. It can also be used as a true
back-up seal for greater safety. A DGS-
CobaSeal tandem arrangement can be
operated at sealing pressures up to 20 bar
(290 PSI). It does not need an intermediate
labyrinth with N2 supply and existing single
seals can be simply retrofitted, thus benefitting
from increased operational safety. The single
DGS + CobaSeal combination is also shorter
than conventional tandem seals with
separation seal and costs can be saved on the
gas supply system in low pressure
applications.
Item Description
1, 9 Seal face, stationary
2, 10 Seat, rotating
3, 11 Thrust ring
4, 12 Spring
5, 13 Shaft sleeve
6 Adapter sleeve
7, 14 Housing
8 Labyrinth

21.07 2015 © Phone +49 (8171) 23-0 All technical specifications are based on extensive tests and our many years of
EagleBurgmann Germany GmbH & Co. KG Fax +49 (8171) 23-1214 experience. The diversity of possible applications means, however, that they can
All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means, 21.07 2015 © EagleBurgmann
Äußere Sauerlacher Straße 6-10 info@eagleburgmann.com serve only as guide values. We must be notified of the exact conditions of application
however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any www.eagleburgmann.com
82515 Wolfratshausen /Germany www.eagleburgmann.com before we can provide any guarantee for a specific case. Subject to change.
guarantee for a specific case. Subject to change.

You might also like