NJ9226E 208-230 V 60 HZ 1
NJ9226E 208-230 V 60 HZ 1
NJ9226E 208-230 V 60 HZ 1
COMPRESSOR DEFINITION
Designation NJ 9226E
Nominal Voltage/Frequency 208-230 V 60 Hz
Engineering Number 144ID12
A - APPLICATION / LIMIT WORKING CONDITIONS
1 Type Hermetic reciprocating compressor
2 Refrigerant R-22
3 Nominal voltage and frequency 208-230 / 60 [ V / Hz ]
4 Application type Medium-High Back pressure (Commercial Compressors)
4.1 Evaporating temperature range -20°C to 10°C (-4°F to 50°F)
5 Motor type CSCR
6 Starting torque HST - Hight starting torque
7 Expantion device Capillary tube or Expansion valve
8 Compressor cooling Operating voltage range
50 Hz 60 Hz
8.1 LBP (32ºC Ambient temperature) - - -
8.2 LBP (43ºC Ambient temperature) - - -
8.3 HBP (32ºC Ambient temperature) - - -
8.4 HBP (43ºC Ambient temperature) - - -
9 Maximum condensing temperature
9.1 Operating 21.7 [kgf/cm²] (309 psig) / ºC - ºF
9.2 Peak 24.2 [kgf/cm²] (344 psig) / ºC - ºF
10 Maximum winding temperature 130 [ °C ]
B - MECHANICAL DATA
1 Commercial designation 1+ [hp]
2 Displacement 21.71 [cm³] (1.325 cu.in)
2.1 Bore [mm] 38.087
2.2 Stroke [mm] 19.066
3 Lubricant charge 750 [ml] (25.36 fl.oz.)
3.1 Lubricants approved
3.2 Lubricants type/viscosity ALQUILB / ISO46
4 Weight (with oil charge) 20.53 [kg] (45.26 lb.)
5 Nitrogen charge 0.2 to 0.3 [kgf/cm²] (2.84 to 4.27 psig)
C - ELETRICAL DATA
1 Nominal Voltage/Frequency/Number of Phases 208-230 V 60 Hz 1~ (Single phase)
2 Starting device type Voltage Relay
2.1 Starting device RVA4AL3C-649
3 Start capacitor 88-108(330) [µF(VAC minimum)]
4 Run capacitor 20(440) [µF(VAC minimum)]
5 Motor protection T0736/C9
6 Start winding resistance 7.76 [W at 25ºC (77ºF)] +/- 8%
7 Run winding resistance 1.78 [W at 25ºC (77ºF)] +/- 8%
8 LRA - Locked rotor amperage (60 Hz) - [A] - Measured according to UL 984
9 FLA - Full load amperage L/MBP (60 Hz) - [A] - Measured according to UL 984
10 FLA - Full Load Amperage HBP (60 Hz) - [A] - Measured according to UL 984
11 Approval boards certification UL
E - PERFORMANCE - CURVES
E - PERFORMANCE - CURVES
F - EXTERNAL CHARACTERISTICS
1 Base plate American Standard
2 Tray holder No
3 Connectors
3.1 SUCTION 12.77 +0.08/+0.00 [mm] (0.503" +0.003"/+0.000")
3.1.1 Material Copper
3.1.2 Shape Vertical
3.2 DISCHARGE 8 +0.07/+0.00 [mm] (0.315" +0.003"/+0.000")
3.2.1 Material Copper
3.2.2 Shape Slanted J
3.3 PROCESS 6.42 +0.08/+0.00 [mm] (0.253" +0.003"/+0.000")
3.3.1 Material Copper
3.3.2 Shape Vertical
3.4 Oil cooler (Copper) No [mm]
3.5 Connector sealing Rubber Plugs