NJ 2212 GK
NJ 2212 GK
NJ 2212 GK
Designation NJ2212GK
Nominal Voltage/Frequency 220-240 V 50 Hz
Engineering Number 943BA01
A - APPLICATION / LIMIT WORKING CONDITIONS
1 Type Hermetic reciprocating compressor
2 Refrigerant R-404A
3 Nominal voltage and frequency 220-240 / 50 [ V / Hz ]
4 Application type Low Back Pressure R404A
4.1 Evaporating temperature range -40°C to -10°C (-40°F to 14°F)
5 Motor type CSCR
6 Starting torque HST - High starting torque
7 Expansion device Capillary tube or Expansion valve
8 Compressor cooling Operating voltage range
50 Hz 60 Hz
8.1 LBP (32ºC Ambient temperature) - - -
8.2 LBP (43ºC Ambient temperature) - - -
8.3 HBP (32ºC Ambient temperature) - - -
8.4 HBP (43ºC Ambient temperature) - - -
9 Maximum condensing pressures/temperature
9.1 Operating (gauge) 25.7 [kgf/cm²] (365 psig) / ºC - ºF
9.2 Peak (gauge) 28.7 [kgf/cm²] (408 psig) / ºC - ºF
10 Maximum winding temperature 130 [ °C ]
B - MECHANICAL DATA
1 Commercial designation 1 1/2 [hp]
2 Displacement 34.38 [cm³] (2.098 cu.in)
2.1 Bore 42.850
2.2 Stroke 11.925
3 Lubricant charge 750 [ml] (25.36 fl.oz.)
3.1 Lubricants approved
3.2 Lubricants type/viscosity ESTER / ISO22
4 Weight(with oil charge) 21.45 [kg] (47.29 lb.)
5 Nitrogen charge 0.2 to 0.3 [kgf/cm²] (2.84 to 4.27 psig)
C - ELECTRICAL DATA
1 Nominal Voltage/Frequency/Number of Phases 220-240 V 50 Hz 1 ~ (Single phase)
2 Starting device type Voltage Relay
2.1 Starting device
3 Start capacitor 88-108(330) [µf(VAC minimum)]
4 Run capacitor 20(440) [µf(VAC minimum)]
5 Motor protection (external) 3HM190-105
6 Start winding resistance 7.25 [W at 25ºC (77ºF)] +/- 8%
7 Run winding resistance 1.95 [W at 25ºC (77ºF)] +/- 8%
8 LRA - Locked rotor amperage (50 Hz) - [A] - Measured according to UL 984
9 FLA - Full load amperage L/MBP (50 Hz) - [A] - Measured according to UL 984
10 FLA - Full Load Amperage HBP (50 Hz) - [A] - Measured according to UL 984
11 Approval boards certification IMQ
COMPRESSOR TECHNICAL DATA
E - PERFORMANCE - CURVES
F - EXTERNAL CHARACTERISTICS
1 Base plate American Standard
2 Tray holder No
3 Connectors
3.1 SUCTION 12.77 +0.08/+0.00 [mm] (0.503" +0.003"/+0.000")
3.1.1 Material Copper
3.1.2 Shape Vertical
3.2 DISCHARGE 8 +0.07/+0.00 [mm] (0.315" +0.003"/+0.000")
3.2.1 Material Copper
3.2.2 Shape Slanted J
3.3 PROCESS 9.6 +0.07/+0.00 [mm] (0.378" +0.003"/+0.000")
3.3.1 Material Copper
3.3.2 Shape Vertical
3.4 Oil cooler (Copper) No [mm]
3.5 Connector sealing Rubber Plugs