EGYS90CLP 220-240 V 50 HZ 1
EGYS90CLP 220-240 V 50 HZ 1
EGYS90CLP 220-240 V 50 HZ 1
COMPRESSOR DEFINITION
Designation EG YS90CLP
Nominal Voltage/Frequency 220-240 V 50 Hz
Engineering Number 513701368
A - APPLICATION / LIMIT WORKING CONDITIONS
1 Type Hermetic reciprocating compressor
2 Refrigerant R-600a
3 Nominal voltage and frequency 220-240 / 50 [ V / Hz ]
4 Application type Low Back Pressure
4.1 Evaporating temperature range -35°C to -10°C (-31°F to 14°F)
5 Motor type RSIR
6 Starting torque LST - Low Starting Torque
7 Expantion device Capillary tube
8 Compressor cooling Operating voltage range
50 Hz 60 Hz
8.1 LBP (32ºC Ambient temperature) Static 198 to 255 V -
8.2 LBP (43ºC Ambient temperature) Static 198 to 255 V -
8.3 HBP (32ºC Ambient temperature) - - -
8.4 HBP (43ºC Ambient temperature) - - -
9 Maximum condensing temperature
9.1 Operating (gauge) 6.9 [kgf/cm²] (98 psig) / ºC - ºF
9.2 Peak (gauge) 7.8 [kgf/cm²] (111 psig) / ºC - ºF
10 Maximum winding temperature 130 [ °C ]
B - MECHANICAL DATA
1 Commercial designation 1/4+ [hp]
2 Displacement 12.21 [cm³] (0.745 cu.in)
2.1 Bore [mm] 26.000
2.2 Stroke [mm] 23.000
3 Lubricant charge 280 [ml] (9.47 fl.oz.)
3.1 Lubricants approved
3.2 Lubricants type/viscosity ALQUILB / ISO5
4 Weight (with oil charge) 10.97 [kg] (24.18 lb.)
5 Nitrogen charge - [kgf/cm²]
C - ELETRICAL DATA
1 Nominal Voltage/Frequency/Number of Phases 220-240 V 50 Hz 1 ~ (Single phase)
2 Starting device type PTC
2.1 Starting device 8EA17E63/QPS2-C22MD3J8
3 Start capacitor - [µF(VAC minimum)]
4 Run capacitor - [µF(VAC minimum)]
5 Motor protection 4TM319KFBYY-53
6 Start winding resistance 23.31 [W at 25ºC (77ºF)] +/- 8%
7 Run winding resistance 11.64 [W at 25ºC (77ºF)] +/- 8%
8 LRA - Locked rotor amperage (50/60 Hz) - [A] - Measured according to UL 984
9 FLA - Full load amperage L/MBP (50/60 Hz) - [A] - Measured according to UL 984
10 FLA - Full Load Amperage HBP (50/60 Hz) - [A] - Measured according to UL 984
11 Approval boards certification IRAM
E - PERFORMANCE - CURVES
E - PERFORMANCE - CURVES
F - EXTERNAL CHARACTERISTICS
1 Base plate Universal EG/F/AMEM version 2
2 Tray holder Yes
3 Connectors
3.1 SUCTION 6.5 +0.12/-0.08 [mm] (0.256" +0.005"/-0.003")
3.1.1 Material Copper
3.1.2 Shape Slanted
3.2 DISCHARGE 4.94 +0.08/-0.08 [mm] (0.194" +0.003"/-0.003")
3.2.1 Material Copper
3.2.2 Shape Slanted
3.3 PROCESS 6.5 +0.12/-0.08 [mm] (0.256" +0.005"/-0.003")
3.3.1 Material Copper
3.3.2 Shape Slanted
3.4 Oil cooler (Copper) No [mm]
3.5 Connector sealing Rubber Plugs