16-Channel Network Video Recorder: User Manual
16-Channel Network Video Recorder: User Manual
16-Channel Network Video Recorder: User Manual
USER MANUAL
1. Product Introduction
Front Panel
3 2 5 4 1
Rear Panel
SN Icon Function
2 VGA Outputs analog video signal. This connects to the monitor to view analog video.
High definition audio and video signal output port. It transmits uncompressed high definition
3 HDMI
video and multiple channel data to the HDMI port of the display device.
4 USB USB2.0 port. Connect a mouse, USB storage device, USB burner, etc.
5 LAN 10M/100Mbps self-adaptive Ethernet port. Connects to the network. Such as Router ,Switch etc.
1
2. Hard Drive Installation
Install your hard drive, the following is needed:
1 A medium sized (regular) Phillips-head screwdriver - not included.
2 Four hard drive fastening screws - included.
3 A hard drive - not included.
1. Loosen the screws on the upper cover 2. Place the HDD in accordance with the
and side panel. four holes on the bottom of the casing.
3. Tighten the HDD screws firmly to the 4. Place the cover back onto the NVR,
bottom of the NVR. Secure the screws on the rear and
side panels.
2
1
3
4
Note: Disconnect the NVR power before installing the hard disk, Hard disk maximum support 8TB.
2
3. NVR Connection
1 Connect the Mouse to USB port.
1
2 Connect a Monitor or TV screen to your NVR via HDMI or VGA cable.
Connection as followings
Internet
4G
LAN WAN
4
12V Adapter
2 Monitor / TV
1 USB Mouse
Note:
For non-PoE cameras: Connect the power adapter to the power port attached to the camera.
For PoE cameras: Connect the PoE camera to a PoE compatible router or switch that is on the
same network as the NVR. PoE cameras can either be powered with a PoE connection or with
a standard power adapter (sold separately).
3
Note: This NVR Supports:
Video Input: 16CH 5MP Recording or 8CH of 8MP Recording.
Video Output: HDMI (4K) & VGA (1080P).
4. NVR Login
Complete login settings according to the NVR boot wizard.
(the default password for the NVR is: 888888)
NVR
admin
Login
Auto Login
4
5. Network Setting
When the network shows an abnormal state !
, double-click to open the network
settings-check whether that the video recorder IP address is the same as the router, if not in
the same network segment, can be set automatic acquisition IP or manually change it to be
consistent as the router segment.
Record
OK Cancel
Alarm
1
Enter Desktop
Camera
Online Equipment
1 IP Address Port Protocol MAC Add Edit
1 1 9 2 . 1 6 8 . 189 6688 ONVI F a4:7b:9f:b5:04:18 +
5
7. SriHome APP Setup
Step 1. SriHome App Installation
Method 1: Scan the QR code to download “SriHome” App.
Method 2: Search“SriHome”on Google Play or iOS App Store.
Android iOS
RoHS
The label is attached on
3-1 3-2 the NVR
6
Note: A. The ID of the device is stick on the label of the video recorder shell
B. Enter Desktop /Main Menu--My Device--Version- Serial NO.
My Device X
My Device PlayBack
Version X
Record Channel 16
Control Panel Camera
System 1.03.06720672.87020171.T000.22
Extra Info 1.15.205254565
Build Date 2021-03-05 16: 55:25
MAC C8:24:02:3e:ca:cf
Intemet
SerialNo N382565RHDRU
Record
OK
Enter Desktop
8. Reset
Enter Desktop>Control Panel>Restore>Please select setting entries that you want to default.
Control Panel X
My Device PlayBack
Restore X
ALL Configuration
Record
OK Cancel
Enter Desktop