User-Manual-2461114 Air Mouse AM-100
User-Manual-2461114 Air Mouse AM-100
User-Manual-2461114 Air Mouse AM-100
2. Features
a). Elegant ID design, with air mouse keyboard on one side, and remote-control on the other
side;
b). Adopting low power consumption 2.4G wireless connection, with strong anti-disturbance
d). With Anti-shake algorithm to make sure the mouse cursor stable and smooth;
3. Function
No. Function Code
Turn on/off the TV/Turn on/off the mouse
1 Turn off Mouse/Mic
and microphone.
2 Volume - Multimedia Volume -
3 Volume + Multimedia Volume +
4 Up Keyboard Up
5 Down Keyboard Down
6 Left Keyboard Left
7 Right Keyboard Right
Mouse Left Click
8 Mouse_L
Enter(when mouse mode is off)
Mouse_R,
9 Mouse Right Click
Back(Android System)
10 Menu Left Windows Key
11 Home Multimedia Home
12 Turn off mouse Turn on/off the mouse, Default is On
13 Page Up Keyboard Page UP
14 Page Down Keyboard Page Down
15 Mute Multimedia Mute
4. Specification
Frequency 2.400-2.483GHz
Weight 65g
USB USB2.0
5. Pairing
Warning: This operation may disconnect the original paired connection, please operate with
cautions.
1). Plug in the USB dongle receiver, keep the distance between the remote control and the pc
within 1m.
2). Press the “OK” and “Return” keys for 3 seconds, then the green indicator starts blinking
3). When the green indicator stops blinking and turns on, pairing succeeds.
6. Hibernation
The remote controller will turn into hibernation mode when it stays still for 20 seconds. Press any
7. Notice
1. Battery: Keep the battery with enough power. When the voltage is low, the stability of mouse
2. Working Distance: The actual working distance of this remote controller will be affected by
electromagnetic field. Please make sure the receiver has not been covered by metal items.
3. Pairing: The pairing has been finished before the remote control leaves the factory. This
4. Mouse Sensitivity Adjustment: Please change new battery first. If the mouse cursor is still
Green Indicator: When the remote controller is well connected, the green indicator will keep
turning on; once the green indicator starts blinking, it shows that the remote controller is not well
connected, please check whether the receiver is well connected to the host or not, or the
Red Indicator: When the red indicator turns on, it means that the remote controller is charging.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions (1)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation