Hyundai E160 Turningcenter
Hyundai E160 Turningcenter
Hyundai E160 Turningcenter
com
Technical Leader
The CNC Turning Center E160 Series, designed by Hyundai WIA with years of expertise and the latest technology, maximizes
productivity by enhancing both technical performance and economic efficiency.
E160A ● ● ●
E160C ● ● ●
E160LA ● ● ●
E160LC ● ● ●
E160LMA ● ● ● ●
E160LMC ● ● ● ●
E160 Series
● 45° slanted one-piece bed structure with high rigidity
● Stabilized unit structure to minimize thermal displacement
● Impressive rapid traverse rate: 30m/min (1,181ipm)
● The most reliable high speed servo turret : 0.1sec/step
● Environmental friendly design
● Compact design suitable for installation in restricted space
● Ergonomic design for convenient access to chuck and tool
E160MA
E160LMA
01
E160 Series
Basic Features
The Best Productivity 6 inch / 8 inch
Compact CNC Turning Center
01
High Precision, High Rigidity One-piece Structure
The E160 Series is designed with a 45 degree slanted bed combined with square type and tube
type rib structure. This special design enhances rigidity and vibration absorbing capability, allowing
powerful cutting with high precision.
02 03
LM Guideway Main Spindle
LM guideway with the rapid traverse rate of 30 m/min (1,181ipm)
Heat produced by the main spindle is blocked by applying a
is installed on E160 Series.
symmetric one-piece base and an insulation plate. This enables
LM guideway maintains high precision even after a long periods
maintenance of high accuracy even during a long period of
of operation.
machining.
LM guideway`s wide surface minimizes attrition and slipping
which can occur often during machining.
04
Turret
By installing a servo turret, fast indexing is
possible (0.1sec/1step) and
productivity is improved by
reducing cycle time
Ball Screw
In order to eliminate thermal growth and increase accuracy, all axis
are driven by high precision double anchored ballscrews.
Basic Features
MACHINE TOOL
HYUNDAI WIA
04
02
E160 SERIES
01
04
+
05
02
7.5kW [10HP] (Cont) 11 [70.4]
7.5 [14.7]
[10] 70N∙m [51.6lbf∙ft] (60min)
35.8N.m [26.4lbf∙ft] (Cont.) 70
0
Long Lasting High Accuracy & Excellent Performance0
E160LMC
Main Spindle Power(kW[HP]) Torque(N∙m[lbf∙ft])
The E160 Series spindle was designed with a precise and highly 15
15kW [20HP] (15min)
rigid spindle structure by adopting a high speed angular ball171.8N m [126.7lbf∙ft] (15min)
[20] .
171.8
bearing in the DB array. 11kW [14.7HP] (Cont)
[126.7]
spindle is designed with an angular bearing structure with P4 class. 126N.m [93lbf∙ft] (60min) 0.001°
94.5N.m [70lbf∙ft] (Cont.) 94.5
[70]
C-Axis Control
When milling, drilling and tappiing with live tools(VDI turret), spindle
control up to 0.001 degree is possible. This allows processing 0of 833 1,111 1,944 4,000
E160C/LC E160C/LC
Power(kW[HP]) Torque(N∙m[lbf∙ft]) Tail Power(kW[HP])
Stock
171.8N.m [126.7lbf∙ft] (30min)
Torque(N∙m[lbf∙ft])
171.8
Stable machining is possible
15
15kWwith 80mm(3.1″) movable
the(30min)
[20HP] [126.7] tailstock.
11
11kW [14.7HP] (15min)
126N.m [93lbf∙ft] (15min)
(Long126N
Bed
[20]
11
: Standard)
11kW [14.7HP] (Cont.)
.m [93lbf∙ft] (Cont.)
[14.7] 126 [14.7] 126
[93] [93]
7.5kW [10HP] (Cont)
7.5
[10]
64.4N.m [47.5lbf∙ft] (Cont.) Taper : MT #4 Travel : 80 mm (3.1″) Diameter : Ø55 (2.2″)
64.4
[47.5]
0 0
833 1,111
Spindle Speed (r/min)
2,500
SIEMENS
4,000
1PH8 Servo 833
Motor
1,111 1,945
Spindle Speed (r/min)
4,000
E160A/LA E160C/LC
Power(kW[HP]) Torque(N∙m[lbf∙ft]) Power(kW[HP]) Torque(N∙m[lbf∙ft])
0 0
500 1,500 4,500 6,000 278 833 2,500 4,000
Spindle Speed (r/min) Spindle Speed (r/min)
Spindle
MACHINE TOOL
HYUNDAI WIA
FANUC Spindle Motor
E160A/LA E160LMA
Power(kW[HP]) Torque(N∙m[lbf∙ft]) Power(kW[HP]) Torque(N∙m[lbf∙ft])
E160 SERIES
35.8 [51.6]
[26.4] 52.5N∙m [38.7lbf∙ft] (Cont.)
52.5
[38.7]
0 0
1,500 2,000 4,500 6,000 1,500 2,000 3,000 6,000
Spindle Speed (r/min) Spindle Speed (r/min)
E160LMC
Power(kW[HP]) Torque(N∙m[lbf∙ft]) 06
+
15kW [20HP] (15min)
15 07
[20] 171.8N.m [126.7lbf∙ft] (15min)
171.8
[126.7]
11kW [14.7HP] (Cont)
11
[14.7]
126N.m [93lbf∙ft] (60min)
0
833 1,111 1,944 4,000
Spindle Speed (r/min)
E160C/LC E160C/LC
Power(kW[HP]) Torque(N∙m[lbf∙ft]) Power(kW[HP]) Torque(N∙m[lbf∙ft])
171.8N.m [126.7lbf∙ft] (30min)
171.8
15kW [20HP] (30min) [126.7]
15
[20]
11kW [14.7HP] (15min) 11kW [14.7HP] (Cont.)
11 126N.m [93lbf∙ft] (15min) 11 126N.m [93lbf∙ft] (Cont.)
[14.7] 126 [14.7] 126
[93] [93]
7.5kW [10HP] (Cont)
7.5
[10]
64.4N.m [47.5lbf∙ft] (Cont.)
64.4
[47.5]
0 0
833 1,111 2,500 4,000 833 1,111 1,945 4,000
Spindle Speed (r/min) Spindle Speed (r/min)
03
E160 Series
Servo Turret
High speed, High Accuracy, Highly Reliable
Servo Turret
Turret
Continued accuracy of the turret indexing position is maintained by a powerful, high
speed servo motor. The 3 piece coupling and non-lift method applied design prevents
foreign material from getting into the turret.
Turret
MACHINE TOOL
HYUNDAI WIA
Mill Turret (VDI)
By adopting 3-piece coupling, it ensures powerful clamping and E160A | LA
turret indexing and tool rotation is done by a single motor.
VDI method makes tool change easier and especially reduces tool
E160 SERIES
◉ Number of Tools : 12 EA
◉ Tool Size (O.D/I.D)
□20/Ø32 (□0.8″/Ø1.2″)
◉ Indexing Time : 0.1 sec/step
08
+
E160C | LC 09
◉ Number of Tools : 10 EA
◉ Tool Size (O.D/I.D)
□25 / Ø32 (□1″/Ø1.2″)
◉ Indexing Time : 0.1 sec/step
Mill Tool Holder
Straight Milling Head and Angular Milling Head live tools can be
utilized to cut sides and inner diameters of workpieces.
Also, Drill, Tap, Endmill and many more tools can be utilized to E160LMA | LMC
enhance productivity and efficiency. (Mill Turret)
◉ Output (Max./Cont.) :
8.8 / 3 kW (11.8 / 4 HP)
◉ Speed (rpm) : 4,500 r/min
◉ Collet Size : Ø16 (Ø0.6″) (ER25)
◉ Type : VDI 30
04
E160 Series
Machining Capability
Excellent Performance, High Accuracy Cutting
CNC Turning Center
Machining
MACHINE TOOL
HYUNDAI WIA
E160LMA Sample Workpieces
O.D Cutting
〈Material〈JIS〉:S45C(Carbon steel〉
E160 SERIES
Tapping
〈Material〈JIS〉:S45C(Carbon steel〉
End Mill 10
+
〈Material〈JIS〉:S45C(Carbon steel〉
11
Processing depth 8 mm (0.31″)
Tool Bore Ø16 (0.63″)
Cutting speed 35 m/min (1,378″)
Tool rotation 700 r/min
Forwarding speed 0.05 mm/rev (0.0019″)
Chip discharging amount 18 cc/min
Machining Variation
05
E160 Series
Smart System
Software for Smart Operating
and Machining
HW-TM
Convenien
er
ing
ce
Us
Ener
Monitor
HW-MMS
HW-ESS
HW-eDNC
User Friendly
gy Saving
HW-MCG
chine
Ma
Eas g
y Programmin
HW-
DPRO T/TM
01 03 05
01 Real-time monitoring of machine operation status (Cloud)
02 History and statistics of machine operation (Cloud)
03 History and statistics of alarm occurrence (Cloud)
02 04 HW-MMS
04 History and statistics of work count (Cloud)
Remote
System 05 Remote diagnosis (Remote)
MACHINE TOOL
HYUNDAI WIA
Faster processing and enhanced accuracy in are possible through the
HYUNDAI WIA Smart System. The user friendly software and equipment monitoring of
the Smart System maximizes productivity.
This software allows transmition of NC data between PC and a Software that offers operation, maintenance, management
machine's CNC. The processing programs can be managed on monitoring and various user friendly features.
the PC through the ethernet or serial communication.
12
+
13
A tool monitoring software which analyzes the load of the An environmental friendly software that reduces the
spindle motor to determine and monitor possible damage of unnecessarily wasted standby power waiting for an operation.
tools.
USB Port
Convenience is increased when inputting and outputting program. The USB port is available
in addition to the former input output methods such as CF memort card and LAN.
06
E160 Series
HYUNDAI-iTROL
The Powerful CNC platform for Machine Tools
Controller
MACHINE TOOL
HYUNDAI WIA
CnC Turning Center
E160 SERIES
Dynamic servo control, highly efficient Siemens servo drive and
Siemens servo motor with durability and quick response have been applied.
14
iTROL Convenient Function iTROL Technology +
15
Smart System operation preperation COMMUNICATION
FUNCTION
When power is on, HYUNDAI-iTROL gives
the worker instructions to do warm-up.
HYUNDAI-iTROL also informs the worker of RJ 45 Ethernet
The three essential operations for machining Easy input/output of programs is possible with the use
are program check, tool measurement and of USB memory card, CF memory card and LAN.
coordinates system setup. HYUNDAI-iTROL
provides three operations in consecutive
order to prevent error and to enable quick
and easy setup.
07
E160 Series
Bar Feeder
Bar feeder system enables automation which
leads to efficiency improvement.
Parts Conveyor
The parts conveyor transfers the finished
workpiece unloaded by the parts catcher for user
convenience.
Optional
MACHINE TOOL
HYUNDAI WIA
Gantry Loader System
Turn Over
Specifications
Specifications
MACHINE TOOL
Solid Chuck 3 Jaw 8″ - ○ Call Light 1 Color : ■ ● ●
HYUNDAI WIA
Standard Soft Jaw (1set) ● ● Call Light 2 Color : ■■ ○ ○
Chuck Clamp Foot Switch ● ● Call Light 3 Color : ■■■ ○ ○
2 Steps Hyd, Pressure Device ○ ○ Call Light & Buzzer 3 Color : ■■■B ○ ○
Spindle Inside Stopper ☆ ☆ Electric Cabinet Light ○ ○
5° Index ☆ ☆ Remote MPG - -
C-Axis (0.001°) - - Work Counter Digital ○ ○
Chuck Open/Close Confirmation Device ○(CE:●) ○(CE:●) Total Counter Digital ○ ○
2 Steps Chuck Foot Switch ☆ ☆ Tool Counter Digital ○ ○
Turret Multi Tool Counter Digital ○ ○
Tool Holder ● ● Electric Circuit Breaker ○ ○
E160 SERIES
Angular Milling Head (Radial) Adapter Type - - Q-Setter ○ ○
Boring Sleeve ● ● Automatic Q-Setter ○ ○
Drill Socket ● ● Work Close Confirmation Device TACO ○ ○
U-Drill Holder ○ ○ (Only for Special Chuck) SMC ○ ○
U-Drill Holder Sleeve ○ ○ Work Setter ☆ ☆
O.D Extension Holder For Outside Diameter ☆ ☆ X axis - -
Linear Scale
Swivel Head - - Z axis - -
Tail Stock & Steady Rest Coolant Level Sensor (Only for Chip Conveyor) ☆ ☆
Quill Type Tail Stock ● ● Environment
Programmable Tail Stock - - Air Conditioner ○ ○
Manual Type Hyd. Steady Rest - - Oil Mist Collector ○ ○
Standard Live Center ● ● Oil Skimmer (Only for Chip Conveyor) ○ ○
High Precesion Live Center ☆ ☆ MQL (Minimal Quantity Lubrication) ☆ ☆
18
2 Steps Tail Stock Pressure System ☆ ☆ Fixture & Automation
+
Quill Forward/Reverse Confirmation Device ○ ○ Auto Door ○ ○
Tail Stock Foot Switch ☆ ☆ Auto Shutter (Only for Automatic System) ☆ ☆
19
Coolant & Air Blow Sub Operation Pannel ☆ ☆
Standard Coolant (Nozzle) ● ● Bar Feeder Interface ○ ○
Chuck Coolant (Upper Chuck) ○ ○ Bar Feeder (FEDEK) ☆ ☆
Gun Coolant ○ ○ Extra M-Code 4ea ○ ○
Through Spindle Coolant (Only for Special Chuck) ☆ ☆ Automation Interface ☆ ☆
Thru Coolant for Live Tool - - 16 Contact ○ ○
I/O Extension (IN & OUT)
Chuck Air Blow (Upper Chuck) ○ ○ 32 Contact ○ ○
Tail Stock Air Blow (Upper Tail Stock) ☆ ☆ Parts Catcher Main SP. ○ ○
Turret Air Blow ☆ ☆ Turret Work Pusher (For Automation) ☆ ☆
Air Gun ○ ○ Parts Conveyor ☆ ☆
Through Spindle Air Blow (Only for Special Chuck) ☆ ☆ Semi Automation System ☆ ☆
0.4Bar (5.8 psi) ● ● Hyd. Device
High Pressure Coolant
6Bar (87 psi) ○ ○ Standard Hyd. Cylinder Hollow ● ●
Power Coolant System (For Automation) ☆ ☆ 35bar (507.6 psi)/
Standard Hyd. Unit ● ●
Coolant Chiller ☆ ☆ 15ℓ (4 gal)
Chip Disposal S/W
130ℓ(34.3 gal) ● ● Machine Guidance (HW-MCG) ☆ ☆
Coolant Tank
150ℓ(39.6 gal) ○ ○ Energy Saving System (HW-ESS) ● ●
Rear (Rear) ○ ○ Tool Monitoring (HW-TM) ○ ○
Chip Conveyor
Front (Right) - - DNC software (HW-eDNC) ○ ○
(Hinge/Scraper)
Rear (Right) ○ ○ Machine Monitoring System (HW-MMS) ☆ ☆
Special Chip Conveyor (Drum Filter) ☆ ☆ Conversational Program (HW-DPRO) ☆ ☆
Standard ETC
○ ○
(180ℓ[47.5 gal]) Tool Box ● ●
Swing Customized Color Need Munsel No. ☆ ☆
○ ○
(200ℓ[52.8 gal]) CAD & CAM ☆ ☆
Chip Wagon Large Swing
○ ○
(290ℓ[76.6 gal])
Large Size
○ ○
(330ℓ[87.2 gal])
Customized ☆ ☆
Specifications
497(19.6)
For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com
425(16.7)
1000(39.3)
340(13.4)
770(30.3)
(14.7)
375
Specifications
(0.4) (6.7)
10 170
565(22.2) 449(17.6) 450(17.7) 940(37) 40 5
(1.6) (0.2)
E160C/A {HYUNDAI-iTROL}
MACHINE TOOL
HYUNDAI WIA
850((33.5) 877(34.5) 153
(6)
425(16.7)
440(17.3)
450(17.7)
1435(56.5)
925(36.4)
Ø210
E160 SERIES
(8.2)
298(11.7)
865(34) - E160C
20
+
21
Ø169
(6.6)
SPINDLE CENTER
{520(20.5)}
550(21.6)
466(18.3)
{495(19.5)}
497(19.6)
425(16.7)
1000(39.3)
340(13.4)
770(30.3)
{160(6.3)}
170(6.7)
(14.7)
375
(0.4)
10
Specifications
E160LC/LMC
E160LA/LMA
440(17.3)
450(17.7)
1435(56.5)
1663(65.4)
985(38.7)
995(39.2)
Ø210
(8.2)
(8.9)
228
865(34) - E160C 520(20.4) 90
(3.5)
497(19.6)
425(16.7)
1000(39.3)
340(13.4)
770(30.3)
(14.7)
375
(0.4) (6.7)
10 170
Specifications
E160A/LA
E160C/LC
MACHINE TOOL
HYUNDAI WIA
Face & I.D
Boring Bar Facing Holder Tool
E160 SERIES
Socket Holder
12 Stations
22
+
23
Ø8 (Ø5/16″) 1 1 1 1 1 1 1 1
I.D Holder Boring Bar
Ø10 (Ø3/8″) 1 1 1 1 1 1 1 1
VDI 30
Ø12 (Ø1/2″) 112 Stations
1 1 1 1 1 1 1
Boring Plug
Ø16 (Ø5/8″) 1 1 1 1 1 1 1 1
Socket
Ø20 (Ø3/4″) 1 1 1 1 1 Bar 1
Boring 1 1
Socket Drill
Ø25 (Ø1″) - 1 - 1 - 1 - 1
Drill MT 1 1 1 1 1 1 1 1 -
ER Collet - - - - - - - -
12 Stations
E160LMA
E160LMC
Angular
Mill Holder
Boring Bar
Socket Drill
E160LMA/LMC
ITEM
mm Unit inch Unit
Ø8 (Ø5/16″) 1 1
Ø10 (Ø3/8″) 1 1
Ø20 (Ø3/4″) 1 1
Drill MT 1 - -
Specifications
.6)
(ø6
MACHINE TOOL
9
16
HYUNDAI WIA
ø
11)
0 (ø
ø28
)
11
(ø
10 (0.4)
80
)
(ø19.5
ø2
E160A/LA ø496
30 (1.2)
ø1
ø32 (ø1.2) 60
(ø
6.
6.5) 3)
E160 SERIES
(ø 270
)
.6
10
ø
(1 2
(1 460
.3)
ø3 96
1)
ø280 (ø11) ø4 .5)
8.
ø
(19
1)
35 (1.4)
(ø1
10 (0.4)
24
80
ø2
+
E160C/LC 35 (1.4)ø 25
19
0(
ø7
.5)
3)
(ø8.
ø210
ø2
10
(ø
8.3
)
8)
(ø3.
)
6.1
ø97
5 (ø
ø15
)
5.9
0 (ø
ø15
)
7.5
)
(ø
) 6.1
90
.6 ø
(ø5 5(
ø1
2 5
E160LMA/LMC ø14 ø1
ø95
5 (ø3
ø9 .7) .7)
3
(ø
ø16
(ø6 0
.3)
25 (1)
194.25 (7.6) 95 (3.7) 65 (2.5)
379.25 (149.3)
Specifications
E160A E160C
OD tool OD tool
44 95 32
330 20 48 120 46
(1.7) (3.7) (1.2)
(13) (0.8) (1.9) (4.7) (1.8) 330 25
(13) (1)
(5.7) 5 (1.2)
30
(0.2)
(0.2)
5
5 5
(5.7)
145
(0.2)
145
(0.2)
ø169
ø210
(6.6)
(8.3)
(0.8)
(0.8)
20
20
273(10.7) 57 15 16 259 55 17
330(13) (2.2) (0.6) (1.6) (10.2) 314 (2.2) (0.7)
(12.4)
121 7 142 6
(4.8) (0.3) (5.6) (0.2)
ID tool ID tool
44 95 32 48 120 46
(1.7) (3.7) (1.2) 330 (1.9) (4.7) (1.8) 330 80
(13)
(13) (3.1)
25 45 80(3.1)
25 45 80(3.1)
15(0.6)
(0.2)
15(0.6)
(0.2)
5 5
5
5
(1.3)
(1.3)
ø32
ø32
(0.2) (0.2)
ø210(8.3)
(1)(1.8)
(1)(1.8)
ø169
(6.6)
129
(5.1)
30(1.2) 30(1.2)
192(7.5)
53 260(10.2) 40 90 53 260(10.2) 40 90
(2.1) (1.6) (3.5) (2.1) (1.6) (3.5)
(2.2)
ø55
ø55
ø210(8.3)
ø169
(6.6)
Specifications
MACHINE TOOL
HYUNDAI WIA
E160LC/LMC E160LA/LMA
OD tool OD tool
Specifications
Specifications [ ] : Option
Max. Turning Length mm(in) 300 (11.8″) 510 (20.1″) 450 (17.7″)
No. of Tools EA 12
Type - - VDI30
Taper - MT4
1,940×1,660 (76.4″×65.4″)
Floor Space (L×W) mm(in) 2,130 x 1,660 (83.9″×65.4″)
[1,991×1,660 (78.4″x65.4″)]
Machine
Height mm(in) 1,602 (63.1″)
*) Using 50Hz voltage instead of 60Hz may lower the output of motors. (excluding servo motors and inverter motors)
Specifications are subject to change without notice for improvement.
For more information, contact Hillary Machinery at (877)902-3751 or www.hillaryinc.com
For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com
Specifications
Specifications [ ] : Option
MACHINE TOOL
Swing Over the Carriage mm(in) Ø285 (11.2″)
HYUNDAI WIA
CAPACITY Max. Turning Dia. mm(in) Ø280 (11″) Ø190 (7.5″)
Max. Turning Length mm(in) 280 (11″) 510 (20.1″) 450 (17.7″)
E160 SERIES
Spindle Type - BELT
No. of Tools EA 10 12
Type - - VDI30
Taper - MT4
1,940×1,660 (76.4″×65.4″)
Floor Space (L×W) mm(in) 2,130 x 1,660 (83.9″×65.4″)
[1,991×1,660 (78.4″x65.4″)]
Machine
Height mm(in) 1,602 (63.1″)
*) Using 50Hz voltage instead of 60Hz may lower the output of motors. (excluding servo motors and inverter motors)
Specifications are subject to change without notice for improvement.
For more information, contact Hillary Machinery at (877)902-3751 or www.hillaryinc.com
For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com
Controller
HYUNDAI-iTROL (E160A/LA/C/LC)
Control & Composition Compensation
Number of axis/Spindles 2 axes (X, Z) / 3 axes (X, Z, C) Backlash compensation
Number of axis/Spindles, max. 8 axes (Axis + Spindle) Leadscrew error compensation
Color display TFT 10.4" Color (800 x 600) Measuring system error compensation
Keyboard QWERTY Full Keyboard Feedforward control (Speed control)
Part program storage 1MB, 3MB, 5MB Safety Function
Addition of part program on CF card Safe torque off (STO)
Transfer Function Safe brake control (SBC)
Feedrate override 0% ~ 200% Safe stop 1 (SS1)
Transfer value input range ± 999999999 Diagnostic Function
Unlimited rotation of rotation axis Alarm/Message , Alarm log
Acc./Dec. with jerk limitation PLC status/LAD online display
Measuring systems 1 and 2, selectable PLC remote connection (Ethernet)
Travel to fixed stop Automation Support Function
Auto servo drive tuning Actual velocity display
Spindle Function Tool life management As time / As amount
Spindle override 0% ~ 150% Work counter/Cycle time Embedded
Spindle speed, max. programmable value range 1000000 ~ 0.0001 2D simulation
Automatic gear stage selection Manual Operation
Spindle orientation Manual handle/Jog transfer
Spindle speed limitation Manual measurement of workpiece / tool offset
Rigid tapping Automatic tool/Workpiece measurement
Spindle control with PLC Automatic/Program reference approach
Interpolation Automatic Operation
Linear interpolation axis, max. 4 axis Program run as using CF card/USB
Circle via center point and end point Program control/modification
Circle via interpolation point Block search
Helical interpolation Reposition
Non-uniform rational B splines Preset (Set actual value)
Continuous - path mode with programmable Data Transmission
rounding clearance Ethernet network
Program Function USB memory stick & CF card
Subroutine levels, max. 7 Convenience Function
Interrupt routines, max. 2 Coordinate system setting,
Processing setting
Number of levels for skip blocks 2 Auto tool length measurement
Polar Coordinates Processing support Tool Monitoring, Spindle overload monitoring
Dimensions inch/metric, Maintenance Turret Guidance, I/O monitoring, Manual
changeover manually or via program Management Soft MCP, M/G code List
Dynamic preprocessing memory FIFO SMART machining
Look ahead 1 Energy saving function (ECO)
Absolute/Incremental command G90 / G91 Machine Monitoring System (MMS Lite)
Scaling/Rotation Language
Read/Write system variables Standard support language Chinese Simplified, English, Korean
Block search
Edit background Option
Processing program number, max. 750 Maximum skip block number 10
Using of CF Card, USB DRF offset
Basic coordinate number, max. 1 MDI program save/load
Work coordinate number, max. 100 Teach-In mode
Basic/Work coordinate programming change 3D simulation Except for working area/Collision check
Scratching function Real time simulation
Global and Local user data (GUD/LUD) Shop Turn Conversational Program
Global program user data Spline interpolation
Conversational Cycle Program Program remote control in network
Tool Function Chinese Traditional, French, German,
Language
Tool radius compensations Italian, Portuguese, Spanish
Tool offset selection via T/D numbers
Tools / Cutting edges in tool list 128 / 256, 256 / 512
Monitoring Function
Working area limit
Software and Hardware limit
Zero-speed/Clamping monitoring
2D/3D protection zones
Contour monitoring
Controller
MACHINE TOOL
Designation of spindle axes 3 axes (1 path) Auxiliary function M & 4 digit
HYUNDAI WIA
X, Z, Y, B axes : 0.001 mm (0.0001 inch) Level-up M Code High speed / Multi / Bypass M code
Least setting Unit
C, A axes : 0.001 deg Spindle speed function S & 4 digit , Binary output
X, Z, Y, B axes : 0.001 mm (0.0001 inch) Spindle override 0% ~ 150% (10% Unit)
Least input increment
C, A axes : 0.001 deg Multi position spindle orientation M19
Inch / Metric conversion G20 / G21 FSSB high speed rigid tapping
High response vector control Constant surface speed control G96, G97
Interlock All axes / Each axis Tool function / Tool compensation
Machine lock All axes Tool function T & 2 digit + Offset 2 digit
± 0 ~ 9999 pulses Tool life management
Backlash compensation
(Rapid traverse / Cutting feed) Tool offset pairs 128 pairs
Position switch Tool nose radius compensation G40, G41, G42
E160 SERIES
PMC axis control No. of registerable programs 1000 ea
Operation Program protect
Automatic operation (Memory) Background editing
MDI operation Extended part program editing Copy, move and change of NC program
DNC operation Needed DNC software / CF card Memory card program edit
Program restart Data input / output & Interface
Wrong operation prevention RS 232C serial port, CF card, USB memory
I/O interface
Program check function Dry run Embedded Ethernet interface
Single block Screen hard copy
Search function Program Number / Sequence Number External message
Interpolation functions External key input
Nano interpolation External workpiece number search
Positioning G00 Automatic data backup
Linear interpolation G01 Setting, display and diagnosis
30
Circular interpolation G02, G03 Self-diagnosis function
+
Exact stop mode Single : G09, Continuous : G61 History display & Operation Alarm & Operator message & Operation 31
Dwell G04, 0 ~ 9999.9999 sec Run hour / Parts count display
Skip G31 Maintenance information
1st reference : G28 Actual cutting feedrate display
Reference position return 2nd reference : G30 Display of spindle speed / T code
Ref. position check : G27 Graphic display
Thread synchronous cutting Operating monitor screen Spindle / Servo load etc.
Thread cutting retract Power consumption monitoring Spindle & Servo
Variable lead thread cutting Spindle / Servo setting screen
Multi / Continuous threading Multi language display Support 20 languages
Feed function / Acc. & Dec. control Display language switching Selection of 5 optional Languages
Rapid traverse LCD Screen Saver Screen saver
Jog : 0~2,000 mm/min (79 ipm) Unexpected disturbance torque BST (Back spin torque limit)
Manual feed
Manual handle : x1, x10, x100 pulses Function for machine type
Reference position return Cs contour control (C & A axes) Mill, MS, Y, SY, LF-Mill, TTMS, TTSY
Cutting Feed command Direct input F code Polar coordinate interpolation Mill, MS, Y, SY, LF-Mill, TTMS, TTSY
Feedrate override 0 ~ 200% (10% Unit) Cylindrical interpolation Mill, MS, Y, SY, LF-Mill, TTMS, TTSY
Rapid traverse override F1%, F5%, F25% / 50%, F100% Canned cycle for drilling Mill, MS, Y, SY, LF-Mill, TTMS, TTSY
Override cancel Spindle orientation expansion MS, SY TTS, TTMS, TTSY
Feed per minute G98 Spindle synchronous control MS, SY TTS, TTMS, TTSY
Feed per revolution G99 Torque control MS, SY TTS, TTMS, TTSY
Look-ahead block 1 block Y axis offset Y, SY, TTSY
Program input Arbitrary angular control Y, SY, TTSY
Tape Code EIA / ISO Composite / Superimposed control MS, SY TTS, TTMS, TTSY
Optional block skip 1 ea Balance cutting MS, SY TTS, TTMS, TTSY
Absolute / Incremental program G90 / G91
Program stop / end M00, M01 / M02, M30 Option
Maximum command unit ± 999,999.999 mm (± 99,999.9999 inch) Optional block skip 9 ea
Plane selection X-Y : G17 / Z-X : G18 / Y-Z : G19 Fast ethernet Needed option board
Workpiece coordinate system G52, G53, 6 pairs (G54 ~ G59) Data server Needed option board
Manual absolute Fixed ON Protection of data at 8 levels
Programmable data input G10 Tool offset pairs 200 pairs
Sub program call 10 folds nested Part program storage size 5120m (2MB)
Custom macro #100 ~ #149, #500 ~ #549 Polygon turning (2 Spindles) Mill, MS, Y, SY, LF-Mill, TTMS, TTSY
G code system A Helical interpolation
Programmable mirror image G51.1, G50.1 Manual Guide i Conversational auto program
G code preventing buffering G4.1 Dynamic graphic display
Direct drawing dimension program Including Chamfering / Corner R
Global Network
+\XQGDL:,$
0DFKLQH7RROV$PHULFD
+\XQGDL:,$
0DFKLQH7RROV(XURSH
5DXQKHLP6HUYLFH&HQWHU
5DQXKHLP5 '&HQWHU
%(,-,1*%5$1&+2)),&( +($'48$57(5
:8+$12)),&(
4,1*'$2%5$1&+2)),&(
&+(1*'8%5$1&+2)),&(
&+21*4,1*2)),&(
-,$1*68
+<81'$,:,$
,1',$%5$1&+2)),&(
+\XQGDL:,$
0DFKLQH7RROV&KLQD
6+$1*+$,%5$1&+2)),&(
*8$1*=+28%5$1&+2)),&(
Global Network
Headquarter
Changwon Technical Center / R&D Center / Factory
153, Jeongdong-ro, Seongsan-gu, Changwon-si,
MACHINE TOOL
HYUNDAI WIA
Gyeongsangnam-do, Korea (Zip Code : 51533)
TEL : +82 55 280 9114 FAX : +82 55 282 9680
Hyundai WIA Hyundai WIA Machine Tools China Qingdao Branch Office
Machine Tools Europe Shanghai Branch Office Room 1207, Cai Fu Building, 182-6 Haier
Kaiserleipromenade 5, 63067 Offenbach, 1-3F, Bldg6, No.1535 Hongmei Road, Middle Road, Qingdao, China
Germany Xuhui District, Shanghai, China TEL : +86 532 8667 9334
TEL : +49 69271 472 701 TEL : +86 021 6427 9885 FAX : +86 532 8667 9338
FAX : +49 69271 472 719 FAX : +86 021 6427 9890
http://machine.hyundai-wia.com