I-Nice Wave Blind kanye ne-Awning Controller Manual

I-Nice Wave Blind kanye ne-Awning Controller Manual

Ukulawulwa kude kwama-roller blinds, ama-venetian blinds, ama-pergolas, amakhethini, ama-awnings namamotho ayimpumputhe anokushintsha kwe-electronic noma kwemishini

Imiyalo nezexwayiso zokufaka nokusetshenziswa

ULWAZI OLUBALULEKILE LOKUPHEPHA

• ISEXWAYISO! - Funda le manuwali ngaphambi kokuzama ukufaka idivayisi! Ukwehluleka ukugcina izincomo ezifakwe kule ncwadi kungase kube yingozi noma kubangele ukwephulwa komthetho. Umkhiqizi, i-NICE SpA Oderzo TV Italia ngeke athweswe sibopho sanoma yikuphi ukulahlekelwa noma umonakalo ngenxa yokungalandeli imiyalelo yencwadi yokusebenza.
• UBUNGOZI BOKUPHATHWA KAgesi! Idivayisi yakhelwe ukusebenza ekufakeni ugesi ekhaya. Ukuxhumeka okungalungile noma ukusetshenziswa kungase kubangele umlilo noma ukushaqeka kukagesi.
• UBUNGOZI BOKUPHATHWA KAgesi! Ngisho nalapho idivayisi ivaliwe, voltage ingase ibe khona kumatheminali ayo. Noma yikuphi ukulungiswa okwethula izinguquko ekucushweni kokuxhuma noma ukulayishwa kufanele kwenziwe njalo nge-fuse ekhubazekile.
• UBUNGOZI BOKUPHATHWA KAgesi! Ukugwema ingozi yokushaqeka ngogesi, ungalusebenzisi ngezandla ezimanzi noma ezimanzi.
• ISEXWAYISO! - Yonke imisebenzi kudivayisi ingenziwa kuphela ngogesi oqeqeshiwe nonelayisense. Gcina imithethonqubo kazwelonke.
• Ungashintshi! - Ungaguquli le divayisi nganoma iyiphi indlela engafakiwe kule manuwali.
• Amanye amadivaysi - Umkhiqizi, i-NICE SpA Oderzo TV Italia ngeke athweswe icala ngomonakalo noma ukulahlekelwa kwamalungelo ewaranti kwamanye amadivaysi axhunyiwe uma ukuxhumeka kungahambisani namamanuwali awo.
• Lo mkhiqizo wenzelwe ukusetshenziswa kwasendlini kuphela ezindaweni ezomile. 
  Ungasebenzisi ku-damp noma izindawo ezimanzi, eduze kukabhavu, usinki, ishawa, idamu lokubhukuda, nanoma iyiphi enye indawo lapho kukhona amanzi noma umswakama.
• ISEXWAYISO! - Akunconywa ukusebenzisa zonke izimpumputhe ze-roller ngasikhathi sinye. Ngenxa yezizathu zokuphepha, okungenani i-roller blind eyodwa kufanele ilawulwe ngokuzimela, inikeze umzila ophephile wokuphunyuka esimweni esiphuthumayo.
• ISEXWAYISO! – Hhayi ithoyizi! – Lo mkhiqizo awulona ithoyizi. Ziqhelelanise nezingane nezilwane!

INCAZELO NEZICI

I-NICE Roll-Control 2 iyisisetshenziswa esiklanyelwe ukulawula ama-roller blinds, ama-awnings, ama-venetian blinds, amakhethini nama-pergolas.
I-NICE Roll-Control 2 ivumela ukuma okunembile kwama-roller blinds noma ama-venetian blind slats. Idivayisi ifakwe ukuqapha amandla. Ivumela ukulawula amadivayisi axhunyiwe noma ngenethiwekhi ye-Z-Wave® noma ngeswishi exhunywe kuyo ngqo.

Izici eziyinhloko 

• Ingasetshenziswa ne:
  • Ama-roller blinds.
  • Izimpumputhe zaseVenetian.
  • I-Pergolas.
  • Amakhethini.
  • Ama-awnings.
  • Amamotho ayimpumputhe anamaswishi anomkhawulo kagesi noma wemishini.
• Ukulinganisa amandla okusebenzayo.
• Isekela Izindlela Zokuphepha zenethiwekhi ye-Z-Wave®: I-S0 enombhalo wemfihlo we-AES-128 kanye ne-S2 Igunyazwe ngokubethela okusekelwe ku-PRNG.
• Isebenza njengesiphindaphinda isiginali ye-Z-Wave® (wonke amadivaysi angasebenzisi ibhethri ngaphakathi kwenethiwekhi azosebenza njengeziphindaphindayo ukuze kwandiswe ukwethembeka kwenethiwekhi).
• Ingasetshenziswa nawo wonke amadivayisi aqinisekiswe ngesitifiketi se-Z-Wave Plus® futhi kufanele ihambisane nalawo madivayisi akhiqizwa abanye abakhiqizi.
• Isebenza ngezinhlobo ezahlukene zokushintshwa; ukuze uthole ukunethezeka kokusetshenziswa, kunconywa ukusebenzisa amaswishi anikezelwe ekusebenzeni kwe-NICE Roll-Control 2 (ama-monostable, ama-switch e-NICE Roll-Control 2).

Qaphela:
Idivayisi ingumkhiqizo onikwe amandla wokuvikeleka we-Z-Wave Plus® futhi isilawuli esinikwe amandla se-Z-Wave® kufanele sisetshenziswe ukuze kusetshenziswe umkhiqizo ngokugcwele.

IMICIMBI

Ithebula A1 – Roll-Control 2 – Imininingwane
Ukunikezwa kwamandla kagesi	100-240V ~ 50/60 Hz
Ukulayisha okulinganiselwe okwamanje	I-2A yamamotho anesici samandla esinxeshezelwe (imithwalo ye-inductive)
Izinhlobo zokulayisha ezihambisanayo	izinjini ze-AC zesigaba esisodwa
Ukushintsha okulinganiselwe okudingekayo	I-elekthronikhi noma umakhenikha
Kunconyiwe ukuvikela okudlulele kwangaphandle	I-10A yohlobo lwe-B circuit breaker (EU)13A uhlobo lwe-B ye-circuit breaker (Sweden)
Okokufakwa emabhokisini	= 60mm, ukujula ≥ 60mm
Izintambo ezinconyiwe	Indawo ephambanayo phakathi kuka-0.75-1.5 mm2 ikhumule u-8-9 mm wokufakwa ngaphakathi
Izinga lokushisa lokusebenza	0–35°C
Umswakama we-ambient	10-95% RH ngaphandle kokuncipha
Iphrothokholi yomsakazo	I-Z-Wave (800 series chip)
Ibhendi yefrikhwensi yomsakazo	EU: 868.4 MHz, 869.85 MHz: 919.8 MHz, 921.4 MHz
Ubukhulu. amandla adlulisayo	+6dBm
Ibanga	kufika ku-100m ngaphandle kuze kufike ku-30m ngaphakathi (kuye ngokuthi isimo sezwe kanye nesakhiwo sesakhiwo)
Ubukhulu(ubude x ububanzi x ukujula)	46 × 36 × 19.9 mm
Ukuhambisana nemiyalo ye-EU	I-RoHS 2011/65 / EU RED 2014/53 / EU

Qaphela:
Imvamisa yerediyo yedivayisi ngayinye kufanele ifane nesilawuli sakho se-Z-Wave. Hlola imininingwane ebhokisini noma uthinte umthengisi wakho uma ungaqiniseki.

UKUFAKA

Ukuxhuma idivayisi ngendlela engahambisani nale manuwali kungabangela ubungozi empilweni, empilweni noma ekulimaleni kwezinto ezibonakalayo. 

Ngaphambi kokufakwa 

• Unganikezi idivayisi ngaphambi kokuyihlanganisa ngokugcwele ebhokisini lokukhweza,
• Xhuma kuphela ngokuhambisana nomunye womdwebo,
• Faka kuphela emabhokisini afaka amanzi ashisayo athobela izindinganiso zokuphepha zikazwelonke ezifanele futhi nokujula okungengaphansi kuka-60mm,
• Ungaxhumi izinto zokushisisa futhi ungaxhumi amasekhethi e-SELV noma e-PELV,
• Amaswishi kagesi asetshenziswa ekufakeni kufanele ahambisane nezindinganiso zokuphepha ezifanele,
• Ubude bezintambo ezisetshenziselwa ukuxhuma iswishi yokulawula akufanele budlule ama-20m,
• Xhuma ama-roller blind AC motors anezishintshi ezilinganiselwe zikagesi noma zemishini kuphela.

Amanothi wemidwebo: 

O1 - Itheminali yokuqala yokuphuma kwe-shutter motor
O2 - Itheminali yesi-2 yokuphuma kwe-shutter motor
I-S1 - itheminali yeswishi yokuqala (esetshenziselwa ukwengeza/ukukhipha idivayisi)
I-S2 - itheminali yeswishi yesibili (esetshenziselwa ukwengeza/ukukhipha idivayisi)
N - amatheminali okuhola okumaphakathi (axhumeke ngaphakathi)
L - amatheminali okuhola okubukhoma (axhumeke ngaphakathi)
PROG - inkinobho yesevisi (esetshenziselwa ukwengeza/ukukhipha idivayisi nokuzulazula kumenyu)
QAPHELA!
Imihlahlandlela efanele yokufaka izintambo kanye nokususwa kwezintambo
Beka izintambo KUPHELA esikhaleni setheminali yocingo.
Ukuze ususe noma yiziphi izintambo, cindezela inkinobho yokukhulula, etholakala phezu kwezikhala

Ukufakwa

1. .Cisha amapayipi amakhulutage (khubaza i-fuse).
2. Vula ibhokisi lokushintsha odongeni.
3. Xhuma nomdwebo olandelayo.
   Umdwebo wezintambo - ukuxhumana ne-AC motor
                                             I-NICE Roll-Control 2
4. Qinisekisa ukuthi idivayisi ixhumeke kahle yini.
5. Hlela idivayisi ebhokisini lokushintsha odongeni.
6. Vala ibhokisi lokushintsha odongeni.
7. Vula amapayipi amakhulutage

Qaphela:
Ukuxhuma ukushintshwa kodonga lwangaphandle/ukushintshwa kodonga lwangaphandle sebenzisa izintambo ze-jumper ezihlinzekiwe uma kunesidingo.
Qaphela:
Uma usebenzisa i-Yubii Home App, akumele ukhathazeke ngokuxhuma izikhombisi-ndlela ngendlela efanele.
Ungashintsha izikhombisi-ndlela kuwizadi nezilungiselelo zedivayisi ku-App yeselula.
ISEXWAYISO!
Izintambo ze-jumper ezinikeziwe zingasetshenziswa kuphela ukuxhuma amaswishi odongeni. Ukuqhuba umthamo wamanje wedivayisi kanye nokuxhumeka okungenzeka kwezinye izingxenye zokufakwa (ibhuloho) kufanele kwenziwe ngekhebula lokufaka elifanele. Uma kunesidingo, sebenzisa isixhumi esifanelekile sezintambo zikagesi.

ENGEZA KU-Z-WAVE NETWORK

Ukungeza (Ukufakwa) - Imodi yokufunda yedivayisi ye-Z-Wave, evumela ukwengeza idivayisi kunethiwekhi ekhona ye-Z-Wave.
Ukungeza ngesandla

Ukwengeza idivayisi kunethiwekhi ye-Z-Wave ngokwenza:

1. Nika amandla idivayisi.
2. Khomba inkinobho ye-PROG noma amaswishi e-S1/S2.
3. Setha isilawuli esikhulu ku- (Imodi Yezokuphepha / Engavikeleki) engeza imodi (bona ibhukwana lesilawuli).
4. Ngokushesha, chofoza inkinobho ye-PROG izikhathi ezintathu. Ngokuzithandela, chofoza okuthi S1 noma S2 izikhathi ezintathu.
   Uma wengeza kokuthi I-Security S2 Eqinisekisiwe, faka Ikhodi Yephinikhodi (ilebula kudivayisi, futhi edwetshelwe ingxenye ye-DSK kulebula yebhokisi).
5. Linda inkomba ye-LED ukuthi icwayize ngokuphuzi.
6. Ukwengeza okuyimpumelelo kuzoqinisekiswa umlayezo wesilawuli se-Z-Wave kanye nenkomba ye-LED yedivayisi:
   • Okuluhlaza - yimpumelelo (engavikelekile, i-S0, i-S2 engagunyaziwe)
   • I-Magenta - ngempumelelo (I-Security S2 Iqinisekisiwe)
   • Okubomvu - ayiphumelelanga

Yengeza usebenzisa i-Smart Start
I-Smart Start imikhiqizo enikwe amandla ingangezwa kunethiwekhi ye-Z-Wave ngokuskena Ikhodi ye-Z-Wave QR ekhona emkhiqizweni ngesilawuli esinikeza ukufakwa kwe-Smart Start. Umkhiqizo we-Smart Start uzokwengezwa ngokuzenzakalelayo phakathi nemizuzu eyi-10 uvulwe ebangeni lenethiwekhi.

Ukwengeza idivayisi kunethiwekhi ye-Z-Wave usebenzisa I-Smart Start:

1. Ukuze usebenzise i-Smart Start isilawuli sakho sidinga ukusekela i-Security S2 (bona imanuwali yesilawuli.
2. Faka ikhodi yeyunithi yezinhlamvu ye-DSK egcwele kusilawuli sakho. Uma isilawuli sakho sikwazi ukuskena i-QR, skena ikhodi ye-QR ebekwe kulebula.
3. Nika amandla idivayisi (tum on the mains voltagfuthi).
4. I-LED izoqala ukucwayiza okuphuzi, linda inqubo yokwengeza iphele.
5. Ukwengeza okuyimpumelelo kuzoqinisekiswa umlayezo wesilawuli se-Z-Wave kanye nenkomba ye-LED yedivayisi:
   • Ukuphumelela okuluhlaza (okungavikelekile, i-SO, i-S2 okungagunyaziwe, i-Magenta - iphumelele (I-Security S2
   • Kuqinisekisiwe),
   • Okubomvu-akuphumelelanga

Qaphela: Esimeni sezinkinga ngokungeza idivayisi, sicela usethe kabusha idivayisi bese uphinda inqubo yokwengeza

UKUSUSA KU-Z-WAVE NETWORK

Iyasusa (Ukukhishwa) - Imodi yokufunda yedivayisi ye-Z-Wave, evumela ukususa idivayisi kunethiwekhi ekhona ye-Z-Wave.

Kuya susa idivayisi evela kunethiwekhi ye-Z-Wave:

1. Qiniseka ukuthi idivayisi inikwe amandla.
2. Khomba inkinobho ye-PROG noma amaswishi e-S1/S2.
3. Setha isilawuli esikhulu kumodi yokukhipha (bona imanuwali yesilawuli).
4. Ngokushesha, chofoza inkinobho ye-PROG izikhathi ezintathu. Ongakukhetha, chofoza okuthi S1 noma S2 izikhathi ezintathu phakathi nemizuzu eyi-10 yokunika amandla idivayisi.
5. Linda inqubo yokususa iphele.
6. Ukukhipha ngempumelelo kuzoqinisekiswa umlayezo wesilawuli se-Z-Wave kanye nenkomba ye-LED yedivayisi – Ebomvu.
7. Ukukhipha idivayisi kunethiwekhi ye-Z-Wave akubangeli ukusetha kabusha kwasekuqaleni.

UKULINGANISWA

Ukulinganisa kuyinqubo lapho idivayisi ifunda khona mayelana nendawo yokushintsha umkhawulo kanye nesici semoto.
Ukulinganisa kuyadingeka ukuze idivayisi ibone kahle indawo eyimpumputhe yerola.
Inqubo iqukethe ukunyakaza okuzenzakalelayo okugcwele, phakathi kwamaswishi anomkhawulo (ukunyakaza okumbalwa kokuya phezulu/phansi).

Ukulinganisa okuzenzakalelayo kusetshenziswa imenyu 

Cindezela bese ubamba inkinobho ethi PROG ukuze ufake imenyu.
Inkinobho yokukhipha uma idivayisi ikhanya okwesibhakabhaka (indawo yokuqala).
Ngokushesha chofoza inkinobho ukuqinisekisa.
Idivayisi izokwenza inqubo yokulinganisa, iqedele umjikelezo ogcwele - (ukunyakaza okumbalwa kokuya phezulu/phansi).
Ngesikhathi sokulinganisa i-LED icwayiza ngokuluhlaza okwesibhakabhaka.
Uma ukulinganisa kuphumelela, inkomba ye-LED izokhanya ngokuluhlaza, uma ukulinganiswa kwehlulekile, inkomba ye-LED izokhanya ngokubomvu.
Hlola ukuthi ukuma kusebenza kahle yini.

Ukulinganisa okuzenzakalelayo kusetshenziswa ipharamitha 

1. Setha ipharamitha engu-150 kuye ku-3.
2. Idivayisi izokwenza inqubo yokulinganisa, iqedele umjikelezo ogcwele - (ukunyakaza okumbalwa kokuya phezulu/phansi).
   Ngesikhathi sokulinganisa i-LED icwayiza ngokuluhlaza okwesibhakabhaka.
3. Uma ukulinganisa kuphumelela, inkomba ye-LED izokhanya ngokuluhlaza, uma ukulinganiswa kwehlulekile, inkomba ye-LED izokhanya ngokubomvu.
4. Hlola ukuthi ukuma kusebenza kahle yini.

Qaphela:
Uma usebenzisa i-Yubii Home App, ungenza ukulinganisa usebenzisa iwizadi noma izilungiselelo zedivayisi.
Qaphela:
Ungakwazi ukumisa inqubo yokulinganisa nganoma yisiphi isikhathi ngokuchofoza inkinobho ye-prog noma okhiye bangaphandle.
Qaphela:
Uma ukulinganisa kwehlulekile, ungakwazi ukusetha ngokwakho izikhathi zokuya phezulu naphansi (amapharamitha 156 futhi 157).

Ukuma mathupha kwama-slats kumodi ye-venetian blinds 

1. Setha ipharamitha engu-151 ukuya ku-1 (90°) noma 2 (180°), kuye ngokuthi amandla okuzungezisa ama-slats.
2. Ngokuzenzakalelayo, isikhathi soshintsho phakathi kwezikhundla ezidlulele sisethelwe ku-15 (imizuzwana engu-1.5) kupharamitha engu-152.
3. Vula ama-slats phakathi kwezikhundla ezidlulele usebenzisa or shintsha:
   • • Uma ngemva komjikelezo ogcwele impumputhe iqala ukuya phezulu noma phansi – kwehla inani lepharamitha engu-152,
   • • Uma ngemva komjikelezo ogcwele ama-slats angafinyeleli ezindaweni zokugcina - khulisa inani lepharamitha engu-152,
4. Phinda isinyathelo sangaphambilini kuze kube yilapho kufinyelelwa indawo egculisayo.
5. Hlola ukuthi ukuma kusebenza kahle yini. Ama-slats amiswe kahle akufanele aphoqe izimpumputhe ukuthi ziye phezulu noma phansi.

ISEBENZA IDIVAYISI

Idivayisi ivumela ukuxhuma ukushintshwa kumatheminali e-S1 ne-S2.
Lokhu kungase kube amaswishi angaguquki noma aphathekayo.
Izinkinobho zokushintsha zinomthwalo wemfanelo wokuphatha ukunyakaza kwezimpumputhe.

Incazelo: 

- Shintsha uxhumeke ku- S1 Isikhumulo
- Shintsha uxhumeke ku- S2 Isikhumulo

Amathiphu ajwayelekile: 

• Ungenza/umise ukunyakaza noma ushintshe isiqondiso usebenzisa ama-switch/es
• Uma usetha inketho yokuvikela imbiza yezimbali isenzo sokunyakaza phansi sizokwenza kuphela ezingeni elichaziwe
• Uma ulawula kuphela ukuma kwe-venetian blind (hhayi ukuzungezisa ama-slats) ama-slats azobuyela endaweni yawo yangaphambilini (kuleveli yokuvula 0-95%).

Ukushintsha kwe-Monostable - chofoza ukuze uhambise 

Exampumklamo wokushintsha:

Ithebula A2 – Roll-Control 2 – Amaswishi aphathekayo – chofoza ukuze uhambise
Ipharamitha:	20. Shintsha uhlobo
Incazelo:	Le pharamitha inquma ukuthi yiziphi izinhlobo zamaswishi nemodi ye-S1 ne-S2 okokufaka okusebenza ngayo.
Setha inani:	0 - Ukushintsha kwe-Monostable - chofoza ukuze uhambise

Ipharamitha:	151. I-roller blind, i-Awning, i-Pergola noma ikhethini
Incazelo:	1× chofoza     shintsha – Qalisa ukuya phezulu uye endaweni ewumkhawulo Chofoza ngokulandelayo - misa 1× chofoza inkinobho - Qalisa ukunyakaza phansi endaweni elinganiselwe 2× chofoza or shintsha – Indawo oyintandokazi Bamba - Ukunyakaza phezulu kuze kube ukukhululwa Bamba - Ukunyakaza phansi kuze kube ukukhululwa
Amanani atholakalayo:	0

Ipharamitha:	151. Impumputhe yaseVenice
Incazelo:	1× chofoza shintsha – Qalisa ukuya phezulu uye endaweni ewumkhawulo Chofoza ngokulandelayo - misa 1× chofoza shintsha- Qalisa ukunyakaza phansi uye endaweni yomkhawulo 2× chofoza or shintsha – Indawo oyintandokazi Bamba - Ukuvula ama-slats phezulu kuze kudedelwe Bamba - Ukunciphisa ama-slats phansi kuze kudedelwe
Amanani atholakalayo:	1 noma 2

Ukushintsha kwe-Monostable - bamba ukuze uhambise 

Exampumklamo wokushintsha:

Ithebula A3 – Roll-Control 2 – Amaswishi aphathekayo – bamba ukuze uhambise
Ipharamitha:	20. Shintsha uhlobo
Incazelo:	Le pharamitha inquma ukuthi yiziphi izinhlobo zamaswishi nemodi ye-S1 ne-S2 okokufaka okusebenza ngayo.
Setha inani:	1 – Amaswishi aphathekayo – bamba ukuze unyakaze

Ipharamitha:	151. I-roller blind, i-Awning, i-Pergola noma ikhethini
Incazelo:	1× chofozashintsha - 10% ukunyakaza phezulu 1× chofoza shintsha - 10% ukunyakaza phansi 2× chofoza or shintsha – Indawo oyintandokazi Bamba- Ukunyakaza phezulu kuze kube ukukhululwa Bamba- Ukunyakaza phansi kuze kube ukukhululwa
Amanani atholakalayo:	0

Ipharamitha:	151. Impumputhe yaseVenice
Incazelo:	1× chofoza  shintsha - Ama-Slats azungeza phezulu ngesinyathelo esichazwe ngaphambilini 1× chofoza inkinobho - Ama-Slats azungeza phansi ngesinyathelo esichazwe ngaphambilini 2× chofoza or shintsha – Indawo oyintandokazi Bamba - Ukunyakaza phezulu kuze kube ukukhululwa Bamba - Ukunyakaza phansi kuze kube ukukhululwa
Amanani atholakalayo:	1 noma 2

Indawo eyintandokazi - iyatholakala
Uma ubamba iswishi isikhathi eside kunesikhathi sokunyakaza kwama-slats + imizuzwana emi-4 eyengeziwe (okuzenzakalelayo 1,5s+4s =5,5s) idivayisi izohamba endaweni elinganiselwe. Uma kunjalo ukukhulula iswishi ngeke kwenze lutho.

Exampumklamo wokushintsha:

Ithebula A4 – Roll-Control 2 – Iswishi eyodwa eguquguqukayo
Ipharamitha:	20. Shintsha uhlobo
Incazelo:	Le pharamitha inquma ukuthi yiziphi izinhlobo zamaswishi nemodi ye-S1 ne-S2 okokufaka okusebenza ngayo.
Setha inani:	2 - Iswishi eyodwa eguquguqukayo

Ipharamitha:	151. I-roller blind, i-Awning, i-Pergola noma ikhethini
Incazelo:	1×chofoza - Qalisa ukunyakaza uye endaweni elinganiselwe Chofoza ngokulandelayo - yima Ukuchofoza okukodwa futhi - Qalisa ukunyakaza uye endaweni ehlukile yomkhawulo 2×chofoza - Indawo oyintandokazi Bamba – Qala ukunyakaza kuze kube uyakhululwa
Amanani atholakalayo:	0

Ipharamitha:	151. Venetian
Incazelo:	1×chofoza - Qalisa ukunyakaza uye endaweni elinganiselwe Chofoza ngokulandelayo - yima Ukuchofoza okukodwa futhi - Qalisa ukunyakaza uye endaweni ehlukile yomkhawulo 2×chofoza - Indawo oyintandokazi Bamba – Qala ukunyakaza kuze kube uyakhululwa
Amanani atholakalayo:	1 noma 2

Indawo eyintandokazi - iyatholakala

Ukushintsha kwe-Bastable
Exampumklamo wokushintsha:

Ithebula A5 – Roll-Control 2 – Amaswishi e-Bistabile
Ipharamitha:	20. Shintsha uhlobo
Incazelo:	Le pharamitha inquma ukuthi yiziphi izinhlobo zamaswishi nemodi ye-S1 ne-S2 okokufaka okusebenza ngayo.
Setha inani:	3 - Amaswishi e-Bistable

Ipharamitha:	151. I-roller blind, i-Awning, i-Pergola noma ikhethini
Incazelo:	1×chofoza (umjikelezo uvaliwe) – Qalisa ukunyakaza uye endaweni yomkhawulo Ngokulandelayo chofoza okufanayo – Misa iswishi efanayo (umjikelezo uvuliwe)
Amanani atholakalayo:	0

Ipharamitha:	151. Venetian
Incazelo:	1×chofoza (umjikelezo uvaliwe) – Qalisa ukunyakaza uye endaweni yomkhawulo Ngokulandelayo chofoza okufanayo – Misa iswishi efanayo (umjikelezo uvuliwe)
Amanani atholakalayo:	1 noma 2

Indawo eyintandokazi – ayitholakali

 Iswishi ye-biostable eyodwa 
Exampumklamo wokushintsha:

Ithebula A6 – Roll-Control 2 – Iswishi ye-bistable eyodwa
Ipharamitha:	20. Shintsha uhlobo
Incazelo:	Le pharamitha inquma ukuthi yiziphi izinhlobo zamaswishi nemodi ye-S1 ne-S2 okokufaka okusebenza ngayo.
Setha inani:	4 - Iswishi yebhistable eyodwa

Ipharamitha:	151. I-roller blind, i-Awning, i-Pergola noma ikhethini
Incazelo:	1×chofoza - Qalisa ukunyakaza uye endaweni elinganiselwe Chofoza ngokulandelayo - yima Okunye ngokuchofoza - Qalisa ukunyakaza uye endaweni ehlukile yomkhawulo Chofoza ngokulandelayo - yima
Amanani atholakalayo:	0

Ipharamitha:	151. Venetian
Incazelo:	1×chofoza - Qalisa ukunyakaza uye endaweni elinganiselwe Chofoza ngokulandelayo - yima Okunye ngokuchofoza - Qalisa ukunyakaza uye endaweni ehlukile yomkhawulo Chofoza ngokulandelayo - yima
Amanani atholakalayo:	1 noma 2

Indawo eyintandokazi – ayitholakali

Ukushintsha kwezifunda ezintathu
Exampumklamo wokushintsha:

Ithebula A7 – Roll-Control 2 – Iswishi enezimo ezintathu
Ipharamitha:	20. Shintsha uhlobo
Incazelo:	Le pharamitha inquma ukuthi yiziphi izinhlobo zamaswishi nemodi ye-S1 ne-S2 okokufaka okusebenza ngayo.
Setha inani:	5

Ipharamitha:	151. I-roller blind, i-Awning, i-Pergola noma ikhethini
Incazelo:	1× chofoza - Qala ukunyakaza uye endaweni elinganiselwe endaweni ekhethiwe kuze kube yilapho inkinobho ikhetha umyalo wokumisa
Amanani atholakalayo:	0

Ipharamitha:	151. Venetian
Incazelo:	1× chofoza - Qala ukunyakaza uye endaweni elinganiselwe endaweni ekhethiwe kuze kube yilapho inkinobho ikhetha umyalo wokumisa
Amanani atholakalayo:	1 noma 2

Indawo eyintandokazi – ayitholakali
Indawo oyintandokazi
Ucingo lwakho lunomshini owakhelwe ngaphakathi wokusetha izindawo eziyintandokazi.
Ungayivula ngokuchofoza kabili ku-monostable switch(ama) exhunywe kudivayisi noma ku-interface yeselula (uhlelo lokusebenza lweselula).
Indawo eyimpumputhe yerola
Ungachaza isikhundla esiyintandokazi samakhethini. Ingasethwa kupharamitha engu-159. Inani elizenzakalelayo libekwe ku-50%.
Isikhundla se-slats esiyintandokazi
Ungachaza indawo oyintandokazi ye-engeli ye-slats. Ingasethwa kupharamitha engu-160. Inani elizenzakalelayo libekwe ku-50%.
Ukuvikelwa kwebhodwe
Ucingo lwakho lunomshini owakhelwe ngaphakathi wokuvikela, isiboneloample, izimbali efasiteleni. Lokhu okubizwa ngokuthi yi-virtual limit switch.
Ungasetha inani layo kupharamitha 158.
Inani elizenzakalelayo lingu-0 - lokhu kusho ukuthi i-roller blind izohamba phakathi kwezikhundla eziphezulu zokugcina.
Izinkomba ze-LED
I-LED eyakhelwe ngaphakathi ibonisa isimo samanje sedivayisi. Uma idivayisi inikwe amandla:

Umbala	Incazelo
Okuhlaza	Idivayisi yengezwe kunethiwekhi ye-Z-Wave (engavikelekile, i-S0, i-S2 ayiqinisekisiwe)
I-Magenta	Idivayisi yengezwe kunethiwekhi ye-Z-Wave (I-Security S2 Iqinisekisiwe)
Okubomvu	Idivayisi ayingeziwe kunethiwekhi ye-Z-Wave
I-cyan ecwayizayo	Isibuyekezo siyaqhubeka

IMENU

Imenyu ivumela ukwenza izenzo. Ukuze usebenzise imenyu:

1. Cisha amapayipi amakhulutage (khubaza i-fuse).
2. Khipha idivayisi ebhokisini lokushintsha odongeni.
3. Vula amapayipi amakhulutage.
4. Cindezela bese ubamba inkinobho ethi PROG ukuze ufake imenyu.
5. Linda i-LED ukuze ikhombise indawo yemenyu oyifunayo ngombala:
   • OKULUHLAZA okwesibhakabhaka (indawo yokuqala) – i-autocalibration
   • OKUTHUTHUSI (indawo yesibili) - ukusetha kabusha kwefekthri
6. Khulula ngokushesha bese uchofoza inkinobho ye-PROG futhi.
7. Ngemva kokuchofoza inkinobho ye-PROG, inkomba ye-LED izoqinisekisa ukuma kwemenyu ngokucwayiza.

UKUSETSHENZISWA KOKUSETSHENZISWA KWEZIMALI ZOKWENZA IZIMPAHLA

Ukusetha kabusha idivayisi kokumisiwe kwasembonini:
Inqubo yokusetha kabusha ivumela ukubuyisela idivayisi kuzilungiselelo zayo zefektri, okusho ukuthi lonke ulwazi mayelana nesilawuli se-Z-Wave nokucushwa komsebenzisi luzosuswa.
Sicela usebenzise le nqubo kuphela lapho isilawuli esiyinhloko senethiwekhi singekho noma singasebenzi.

1. Cisha amapayipi amakhulutage (khubaza i-fuse).
2. Khipha idivayisi ebhokisini lokushintsha odongeni.
3. Vula amapayipi amakhulutage.
4. Cindezela bese ubamba inkinobho ethi PROG ukuze ufake imenyu.
5. Linda inkomba ye-LED ukuthi ikhanye ngokuphuzi (indawo yemenyu).
6. Khulula ngokushesha bese uchofoza inkinobho ye-PROG futhi.
7. Ngesikhathi sokusetha kabusha kwasekuqaleni, inkomba ye-LED izocwayiza ngokuphuzi.
8. Ngemuva kwemizuzwana embalwa idivayisi izoqalwa kabusha, okusayindwe ngombala wesikhombi se-LED obomvu.

I-ENERGY METERING

Idivayisi ivumela ukuqapha ukusetshenziswa kwamandla. Idatha ithunyelwa kusilawuli esikhulu se-Z-Wave.

Ukulinganisa kwenziwa ubuchwepheshe be-micro-controller obuthuthuke kakhulu, obuqinisekisa ukunemba okuphezulu nokunemba (+/- 5% ngemithwalo engaphezu kuka-10W).
Amandla kagesi – amandla asetshenziswa idivayisi phakathi nenkathi yesikhathi.
Abasebenzisi bakagesi ezindlini bakhokhiswa abahlinzeki ngesisekelo samandla asebenzayo asetshenziswa kuyunithi yesikhathi esithile.
Okuvame ukukalwa nge-kilowatt-hora [kWh].
I-kilowathour eyodwa ilingana ne-kilowatt yamandla asetshenziswe esikhathini esiyihora elilodwa, 1kWh = 1000Wh.

Isetha kabusha inkumbulo yokusebenzisa:
Ukusetha kabusha inkumbulo yokusebenzisa kungaqalwa nge-BUI.
Ukusetha kabusha inkumbulo yokusetshenziswa nakho kuyenziwa, ngesikhathi sokusetha kabusha inqubo yezimiso zasembonini.

UKULUNGISWA

Inhlangano (amadivayisi axhumanisayo) - ukulawula okuqondile kwamanye amadivayisi ngaphakathi kwenethiwekhi yohlelo lwe-Z-Wave.

Izinhlangano zivumela:

• Ukubika isimo sedivayisi kusilawuli se-Z-Wave (kusetshenziswa i-Lifeline Group),
• Ukudala ama-automation alula ngokulawula amanye amadivaysi e-4 ngaphandle kokuhlanganyela kwesilawuli esikhulu (usebenzisa amaqembu anikezwe izenzo kudivayisi).

Qaphela.
Imiyalo ethunyelwa eqenjini lesibili lokuhlanganisa ikhombisa ukusebenza kwenkinobho ngokuya ngokucushwa kwedivayisi, isb ukuqalisa ukunyakaza kokuvala amehlo usebenzisa inkinobho kuzothumela uhlaka olunesibopho sesenzo esifanayo.

Idivayisi inikeza ukuhlangana kwamaqembu ayi-2:
Iqembu lokuqala lenhlangano - “I-Lifeline” ibika isimo sedivayisi futhi ivumela ukwabela idivayisi eyodwa kuphela (isilawuli esiyinhloko ngokuzenzakalela).
Iqembu lesibili lenhlangano - "Isimbozo Sewindi" senzelwe amakhethini noma amakhethini avumela umsebenzisi ukuthi alawule inani lokukhanya elidlula amafasitela.

Idivayisi ivumela ukulawula amadivayisi avamile angu-5 noma ama-multichannel eqembu lesibili lokuhlanganisa, kuyilapho i-“Lifeline” igcinelwe isilawuli kuphela futhi kunganikezwa inodi engu-2 kuphela.

Ukwengeza inhlangano: 

1. Iya ku Izilungiselelo .
2. Iya ku Amadivayisi.
3. Khetha idivayisi efanele ohlwini.
4. Khetha i- Izinhlangano ithebhu.
5. Cacisa ukuthi yiliphi iqembu nokuthi yiziphi izisetshenziswa ongazihlanganisa.
6. Londoloza izinguquko zakho.

Ithebula A8 – Roll-Control 2 – Association Group 2:Isimo esithi "Isimbozo Sewindi" kanye nenani le-Id yomyalo. Iwindi elimboza isimo sokulinganisa kanye nenani le-Id yomyalo.
Id	Isimo sokulinganisa		Igama Lesembozo sewindi	I-id Yesembozo sewindi
I-Id_Roller	0	Idivayisi ayilinganiselwe	OUT_PHANSI_1	I-12 (0x0C)
	1	Ukulinganisa okuzenzakalelayo kuphumelele	OKUPHUMELA_ EZANSI _2	13 (0x0D)
	2	Ukulinganisa okuzenzakalelayo kwehlulekile	OUT_PHANSI_1	I-12 (0x0C)
	4	Ukulinganisa okwenziwa ngesandla	OKUPHUMELA_ EZANSI _2	13 (0x0D)
I-Id_Slat	0	Idivayisi ayilinganiselwe	HORIZONTAL_SLATS_ANGLE_1	I-22 (0x16)
	1	Ukulinganisa okuzenzakalelayo kuphumelele	HORIZONTAL_SLATS_ANGLE_2	I-23 (0x17)
	2	Ukulinganisa okuzenzakalelayo kwehlulekile	HORIZONTAL_SLATS_ANGLE_1	I-22 (0x16)
	4	Ukulinganisa okwenziwa ngesandla	HORIZONTAL_SLATS_ANGLE_2	I-23 (0x17)

Ithebula A9 - Roll-Control 2 - Imodi yokusebenza:I-roller blind, I-Awning, i-Pergola, Ikhethini (ipharamitha engu-151 inani = 0)
Shintsha uhloboIpharamitha (20)		Shintsha	Ukuchofoza okukodwa		Chofoza kabili
Inani	Igama	I-S1 noma i-S2	Umyalo	ID	Umyalo	ID
0	Ukushintsha kwe-Monostable - chofoza ukuze uhambise		Iwindi Lokumboza Iwindi Guqula Izinga Lokuqala LokushintshaIwindi Lokumboza Ukushintshwa Kwezinga Lokumisa	I-Id_Roller	Ileveli Yesembozo Sewindi Setha	I-Id_Roller
1	Ukushintsha kwe-Monostable - bamba ukuze uhambise
2	I-Single monostable switch
3	Amaswishi Bistable		–	–	–	–
5	Ukushintsha kwezifunda ezintathu		–	–	–	–

Shintsha uhloboIpharamitha (20)		Shintsha	Bamba		Khulula
Inani	Igama	I-S1 noma i-S2	Umyalo	ID	Umyalo	ID
0	Ukushintsha kwe-Monostable - chofoza ukuze uhambise		Iwindi Lokumboza Iwindi Guqula Izinga Lokuqala LokushintshaIwindi Lokumboza Ukushintshwa Kwezinga Lokumisa	I-Id_Roller	Ushintsho Lwezinga Lokumisa Lokumboza Iwindi	I-Id_Roller
1	Ukushintsha kwe-Monostable - bamba ukuze uhambise
2	I-Single monostable switch
3	Amaswishi Bistable		–	–	–	–
5	Ukushintsha kwezifunda ezintathu		–	–	–	–

Shintsha uhlobo lweParametr (20)		Shintsha	Shintsha ushintsho lwesimo lapho i-roller inganyakazi		Shintsha ushintsho lwesimo lapho i-roller inganyakazi
Inani	Igama	I-S1 noma i-S2	Umyalo	ID	Umyalo	ID
4	Iswishi ye-bistable eyodwa		Ukushintsha Kwezinga Lokuqala Lokumboza Iwindi	I-Id_Roller	Ushintsho Lwezinga Lokumisa Lokumboza Iwindi	I-Id_Roller

Ithebula A10 - Roll-Control 2 - Imodi yokusebenza:Impumputhe yaseVenetian engu-90° (param 151 = 1) noma impumputhe yaseVenetian engu-180° (ipharam 151 = 2)
Shintsha uhloboIpharamitha (20)		Shintsha	Ukuchofoza okukodwa		Chofoza kabili
Inani	Igama	I-S1 noma i-S2	Umyalo	ID	Umyalo	ID
0	Ukushintsha kwe-Monostable - chofoza ukuze uhambise		Iwindi Lokumboza Iwindi Guqula Izinga Lokuqala LokushintshaIwindi Lokumboza Ukushintshwa Kwezinga Lokumisa	I-Id_Roller	Ileveli Yesembozo Sewindi Setha	I-Id_Roller Id_Slat
1	Ukushintsha kwe-Monostable - bamba ukuze uhambise			I-Id_Slat
2	I-Single monostable switch			I-Id_Roller
3	Amaswishi Bistable		–	–	–	–
5	Ukushintsha kwezifunda ezintathu		–	–	–	–

Shintsha uhloboIpharamitha (20)		Shintsha	Ukuchofoza okukodwa		Chofoza kabili
Inani	Igama		Umyalo	ID	Umyalo	ID
0	Ukushintsha kwe-Monostable - chofoza ukuze uhambise		Iwindi Lokumboza Iwindi Guqula Izinga Lokuqala LokushintshaIwindi Lokumboza Ukushintshwa Kwezinga Lokumisa	I-Id_Roller	Ileveli Yesembozo Sewindi Setha	I-Id_Slat
1	Ukushintsha kwe-Monostable - bamba ukuze uhambise			I-Id_Slat		I-Id_Roller
2	I-Single monostable switch	I-S1 noma i-S2		I-Id_Roller		I-Id_Slat
3	Amaswishi Bistable		Ukuvala Iwindi	I-Id_Roller	Ukuvala Iwindi	I-Id_Roller
			Qala Ukushintsha Kwezinga		Misa Ukushintsha Kwezinga
5	Ukushintsha kwezifunda ezintathu		Ukuvala Iwindi	I-Id_Roller	Ukuvala Iwindi	I-Id_Roller
			Qala Ukushintsha Kwezinga		Misa Ukushintsha Kwezinga

Shintsha uhlobo lweParametr (20)		Shintsha	Shintsha ushintsho lwesimo lapho i-roller inganyakazi		Shintsha ushintsho lwesimo lapho i-roller inganyakazi
Inani	Igama	I-S1 noma i-S2	Umyalo	ID	Umyalo	ID
4	Iswishi ye-bistable eyodwa		Ukushintsha Kwezinga Lokuqala Lokumboza Iwindi	I-Id_Roller	Ushintsho Lwezinga Lokumisa Lokumboza Iwindi	I-Id_Roller

AMApharamitha Athuthukile

Idivayisi ivumela ukwenza ngendlela oyifisayo ukusebenza kwayo ngokwezidingo zomsebenzisi isebenzisa imingcele elungisekayo.
Izilungiselelo zingalungiswa ngesilawuli se-Z-Wave lapho idivayisi ingezwa khona. Indlela yokuwalungisa ingase yehluke kuye ngesilawuli.
Kusixhumi esibonakalayo se-NICE ukucushwa kwedivayisi kuyatholakala njengesethi elula yezinketho engxenyeni ethi Izilungiselelo Ezithuthukisiwe.
Uma usebenzisa i-Yubii Home App, izilungiselelo eziningi zepharamitha ezilandelayo zingashintshwa esigabeni samasethingi edivayisi.

Ukuze ulungiselele idivayisi: 

1. Iya ku Izilungiselelo.
2. Iya ku Amadivayisi.
3. Khetha idivayisi efanele ohlwini.
4. Khetha i- Okuthuthukile or Amapharamitha ithebhu.
5. Khetha bese ushintsha ipharamitha.
6. Londoloza izinguquko zakho.

Ithebula A11 – Roll-Control 2 – Amapharamitha athuthukile
Ipharamitha:	20. Shintsha uhlobo
Incazelo:	Le pharamitha inquma ukuthi yiziphi izinhlobo zokushintshwa nokuthi okokufaka kwe-S1 ne-S2 kusebenza ngayiphi imodi.
Izilungiselelo ezitholakalayo:	0 - Amaswishi aphathekayo - chofoza ukuze uhambise 1 - Amaswishi aphathekayo - bamba ukuze uhambise 2 - Iswishi eyodwa ephathekayo3 - Iswishi ebhistable4 - Iswishi yebhistable eyodwa 5 - Iswishi yezifunda ezintathu
Isilungiselelo esizenzakalelayo:	0 (inani elizenzakalelayo)	Usayizi sepharamitha:	1 [byte]

Ipharamitha:	24. Izinkinobho orientation
Incazelo:	Le parameter ivumela ukubuyisela emuva ukusebenza kwezinkinobho.
Izilungiselelo ezitholakalayo:	0 - okuzenzakalelayo (inkinobho yokuqala PHEZULU, inkinobho yesi-1 PHANSI)2 - kuhlehlisiwe (inkinobho yokuqala PHANSI, inkinobho yesi-1 PHEZULU)
Isilungiselelo esizenzakalelayo:	0 (inani elizenzakalelayo)	Usayizi sepharamitha:	1 [byte]

Ipharamitha:	25. Ukuma kwemiphumela
Incazelo:	Le parameter ivumela ukubuyisela emuva ukusebenza kwe-O1 ne-O2 ngaphandle kokushintsha izintambo (isb. uma kwenzeka uxhumano lwenjini olungavumelekile).
Izilungiselelo ezitholakalayo:	0 – okuzenzakalelayo (O1 – PHEZULU, O2 – PHANSI)1 – kuhlehlisiwe (O1 – PHANSI, O2 – PHEZULU)
Isilungiselelo esizenzakalelayo:	0 (inani elizenzakalelayo)	Usayizi sepharamitha:	1 [byte]

Ipharamitha:	40. Inkinobho yokuqala - izigcawu zithunyelwe
Incazelo:	Le pharamitha inquma ukuthi yiziphi izenzo eziholela ekuthumeleni ama-ID esigcawu anikezwe wona. Amanani angahlanganiswa (isb. 1+2=3 kusho ukuthi izigcawu zokuchofoza kanye nokukabili zithunyelwa).Ukuvumela izigcawu zokuchofoza kathathu kukhubaza ukufaka idivayisi kumodi yokufunda ngokuchofoza kathathu.
Izilungiselelo ezitholakalayo:	0 – Asikho isigcawu esisebenzayo1 – Ikhi icindezelwe 1 isikhathi2 – Ikhi icindezelwe izikhathi ezi-2 – Ikhi icindezeleke izikhathi ezi-4 – Cindezelwa inkinobho bese udedelwa ukhiye
Isilungiselelo esizenzakalelayo:	15 (Zonke izigcawu ziyasebenza)	Usayizi sepharamitha:	1 [byte]

Ipharamitha:	41. Inkinobho yesibili - izigcawu zithunyelwe
Incazelo:	Le pharamitha inquma ukuthi yiziphi izenzo eziholela ekuthumeleni ama-ID esigcawu anikezwe wona. Amanani angahlanganiswa (isb. 1+2=3 kusho ukuthi izigcawu zokuchofoza kanye nokukabili zithunyelwa).Ukuvumela izigcawu zokuchofoza kathathu kukhubaza ukufaka idivayisi kumodi yokufunda ngokuchofoza kathathu.
Izilungiselelo ezitholakalayo:	0 – Asikho isigcawu esisebenzayo1 – Ikhi icindezelwe 1 isikhathi2 – Ikhi icindezelwe izikhathi ezi-2 – Ikhi icindezeleke izikhathi ezi-4 – Cindezelwa inkinobho bese udedelwa ukhiye
Isilungiselelo esizenzakalelayo:	15 (Zonke izigcawu ziyasebenza)	Usayizi sepharamitha:	1 [byte]

Ipharamitha:	150. Ukulinganisa
Incazelo:	Ukuqala ukulinganisa okuzenzakalelayo, khetha inani 3. Uma inqubo yokulinganisa iphumelela, ipharamitha ithatha inani 1. Uma ukulinganisa okuzenzakalelayo kwehluleka, ipharamitha ithatha inani 2. Uma izikhathi zokushintsha zocingo zishintshwa ngesandla kupharamitha ( 156/157), ipharamitha engu-150 izothatha inani 4.
Izilungiselelo ezitholakalayo:	0 – Idivayisi ayilinganisiwe1 – Ukulinganisa okuzenzakalelayo kuphumelele 2 – Ukulinganisa okuzenzakalelayo kwehlulekile3 – Inqubo yokulinganisa4 – Ukulinganisa mathupha
Isilungiselelo esizenzakalelayo:	0 (inani elizenzakalelayo)	Usayizi sepharamitha:	1 [byte]

Ipharamitha:	151. Imodi yokusebenza
Incazelo:	Le parameter ikuvumela ukuthi ulungise ukusebenza, kuye ngokuthi idivayisi exhunyiwe.Endabeni yezimpumputhe ze-venetian, i-angle yokujikeleza kwama-slats kufanele futhi ikhethwe.
Izilungiselelo ezitholakalayo:	0 – Impumputhe eyi-roller, i-Awning, i-Pergola, ikhethini 1 – impumputhe yaseVenetian 90°2 – impumputhe yaseVenice 180°
Isilungiselelo esizenzakalelayo:	0 (inani elizenzakalelayo)	Usayizi sepharamitha:	1 [byte]

Ipharamitha:	152. Impumputhe yaseVenice - ama-slats agcwele isikhathi sokujika
Incazelo:	Ngokuvala amehlo e-Venetian ipharamitha inquma isikhathi sokuphenduka okugcwele kwama-slats.Ipharamitha ayibalulekile kwezinye izindlela.
Izilungiselelo ezitholakalayo:	0-65535 (0 – 6553.5s, njalo ngo-0.1s) - isikhathi sokujika
Isilungiselelo esizenzakalelayo:	15 (1.5 imizuzwana)	Usayizi sepharamitha:	2 [byte]

Ipharamitha:	156. Isikhathi sokukhuphuka
Incazelo:	Le pharamitha inquma isikhathi esisithathayo ukuze ufinyelele ukuvuleka okugcwele.Inani lihlelwa ngokuzenzakalelayo phakathi nenqubo yokulinganisa. Kufanele isethwe mathupha uma kuba nezinkinga ngokukalwa kwe-autocalibration.
Izilungiselelo ezitholakalayo:	0-65535 (0 – 6553.5s, njalo ngo-0.1s) - isikhathi sokujika
Isilungiselelo esizenzakalelayo:	600 (60 imizuzwana)	Usayizi sepharamitha:	2 [byte]

Ipharamitha:	157. Isikhathi sokuhamba phansi
Incazelo:	Le parameter inquma isikhathi esisithathayo ukuze sifinyelele ekuvaleni okugcwele. Inani lisethwa ngokuzenzakalelayo phakathi nenqubo yokulinganisa.Kufanele lisethwe mathupha uma kuba nezinkinga ngokulinganisa okuzenzakalelayo.
Izilungiselelo ezitholakalayo:	0-65535 (0 – 6553.5s, njalo ngo-0.1s) - isikhathi sokujika
Isilungiselelo esizenzakalelayo:	600 (60 imizuzwana)	Usayizi sepharamitha:	2 [byte]

Ipharamitha:	158. Ukushintsha komkhawulo obonakalayo. Ukuvikelwa kwebhodwe
Incazelo:	Le parameter ikuvumela ukuthi usethe izinga elincane eligxilile lokwehlisa isivalo.Ngokwesiboneloample, ukuvikela isitsha sezimbali esisefasiteleni.
Izilungiselelo ezitholakalayo:	0-99
Isilungiselelo esizenzakalelayo:	0 (inani elizenzakalelayo)	Usayizi sepharamitha:	1 [byte]

Ipharamitha:	159. Indawo eyintandokazi – izinga lokuvula
Incazelo:	Le parameter ikuvumela ukuthi uchaze izinga lakho lokuvula eliyintandokazi.
Izilungiselelo ezitholakalayo:	0-990xFF - Ukusebenza kukhutshaziwe
Isilungiselelo esizenzakalelayo:	50 (inani elizenzakalelayo)	Usayizi sepharamitha:	1 [byte]

Ipharamitha:	160. Indawo eyintandokazi – i-slat angle
Incazelo:	Le parameter ikuvumela ukuthi uchaze indawo oyikhonzile ye-slat angle. Ipharamitha isetshenziselwa kuphela izimpumputhe ze-venetian.
Izilungiselelo ezitholakalayo:	0-990xFF - Ukusebenza kukhutshaziwe
Isilungiselelo esizenzakalelayo:	50 (inani elizenzakalelayo)	Usayizi sepharamitha:	1 [byte]

Ukucaciswa kwe-Z-WAVE

Inkomba CC - izinkomba ezitholakalayo
I-ID yesikhombi – 0x50 (Khomba)
I-Indicator CC – izakhiwo ezitholakalayo

Ithebula A12 – Roll-Control 2 – Indicator CC
I-ID yendawo	Incazelo	Amanani nezimfuneko
0x03	Izikhathi zokuguqula, zokuvula/ukuvala	Iqala ukushintsha phakathi kokuVULA nokuvala Isetshenziselwa ukusetha ubude besikhathi sokuVula/Ukuvala.Amanani atholakalayo: 0x00 .. 0xFF (0 .. 25.5 imizuzwana)Uma lokhu kucacisiwe, Imijikelezo Yokuvula/Yokuvala KUFANELE icaciswe.
0x04	Ukuguqula, Ukuvula/Ukuvala Imijikelezo	Isetshenziselwa ukusetha inombolo yezikhathi zokuvala/zokuvala.Amanani atholakalayo: 0x00 .. 0xFE (0 .. izikhathi ezingu-254)• 0xFF (bonisa kuze kumiswe)Uma lokhu kucacisiwe, Inkathi Yokuvula/Yokuvala KUMELE icaciswe.
0x05	Ukuguqula, Ngesikhathi phakathi nesikhathi SokuVula/Ukuvala	Isetshenziselwa ukusetha ubude besikhathi Sesikhathi phakathi Nenkathi YokuVula/Yokuvala.Ivumela izikhathi zokuvula/zokuvala ezingena-asymetic.Amanani atholakalayo 0x00 (isikhathi sokuvula/sokuvala esilinganayo – Ngesikhathi esilingana nesikhathi sokuvala) 0x01 .. 0xFF (0.1 .. 25.5 imizuzwana)Example: 300ms VULIWE no-500ms OFF kufinyelelwa ngokusetha isikhathi sokuVula/Ukuvala (0x03) = 0x08 futhi Ngesikhathi phakathi Nenkathi Yokuvula/Yokuvala(0x05) = 0x03 Leli nani lishaywa indiva uma izikhathi zokuvala/zokuvala zingachazwa.Leli nani li kuzitshiwe uma inani lezikhathi zokuvala/ukuvala lingaphansi kwaleli nani.

Amakilasi Omyalo Asekelwe 

Ithebula A13 – Roll-Control 2 – Amakilasi Omyalo Asekelwe
I-Command Class	Inguqulo	Kuvikelekile
I-COMMAND_CLASS_APPLICATION_STATUS [0x22]	V1
I-COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]	V2
COMMAND_CLASS_WINDOW_COVERING [0x6A]	V1	YEBO
COMMAND_CLASS_SWITCH_MULTILEVEL [0x26]	V4	YEBO
I-COMMAND_CLASS_ASSOCIATION [0x85]	V2	YEBO
COMMAND_CLASS_MULTI_CHANNEL ASSOCIATION [0x8E]	V3	YEBO
I-COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]	V3	YEBO
I-COMMAND_CLASS_TRANSPORT_SERVICE [0x55]	V2
I-COMMAND_CLASS_VERSION [0x86]	V3	YEBO
I-COMMAND_CLASS_MANUFACTURER_SPECIFIC [0x72]	V2	YEBO
I-COMMAND_CLASS_DEVICE_RESET_LOCALLY [0x5A]	V1	YEBO
I-COMMAND_CLASS_POWERLEVEL [0x73]	V1	YEBO
I-COMMAND_CLASS_SECURITY [0x98]	V1
I-COMMAND_CLASS_SECURITY_2 [0x9F]	V1
COMMAND_CLASS_METER [0x32]	V3	YEBO
I-COMMAND_CLASS_CONFIGURATION [0x70]	V4	YEBO
I-COMMAND_CLASS_NOTIFICATION [0x71]	V8	YEBO
I-COMMAND_CLASS_PROTECTION [0x75]	V2	YEBO
I-COMMAND_CLASS_CENTRAL_SCENE [0x5B]	V3	YEBO
I-COMMAND_CLASS_FIRMWARE_UPDATE_MD [0x7A]	V5	YEBO
I-COMMAND_CLASS_SUPERVISION [0x6C]	V1
I-COMMAND_CLASS_INDICATOR [0x87]	V3	YEBO
I-COMMAND_CLASS_BASIC [0x20]	V2	YEBO

I-CC eyisisekelo 

Ithebula A14 – Roll-Control 2 – Basic CC
Umyalo	Inani	Umyalo wokwenza imephu	Inani lemephu
Isethi Eyisisekelo	[0xFF]	Isethi Yokushintsha Kwezinga eliphezulu	[0xFF]
Isethi Eyisisekelo	[0x00]	Isethi Yokushintsha Kwezinga eliphezulu	Isethi Yokushintsha Kwezinga eliphezulu
Isethi Eyisisekelo	[0x00] ukuya ku- [0x63]	Ukushintsha Kwezinga Lokuqala(Phezulu/Phansi)	[0x00], [0x63]
Thola Okuyisisekelo		I-Multilevel Switch Thola
Umbiko Oyisisekelo(Inani Lamanje Nenani Eliqondiwe KUFANELE kusethwe ku-0xFE uma ungawazi isikhundla.)		Umbiko Wokushintsha Kwemultilevel

Isaziso CC
Idivayisi isebenzisa I-Noification Command Class ukuze ibike izehlakalo ezihlukene kusilawuli (Iqembu le-“Lifeline”).

Ithebula A15 – Roll-Control 2 – Isaziso CC
Uhlobo Lwezaziso	Umcimbi / Izwe	Ipharamitha	Isimo	Kumaphoyinti okugcina
Ukuphathwa kwamandla [0x08]	Ayisebenzi [0x00]		0xFF - vumela (akushintsheki)	Impande
	Okwamanje kutholiwe [0x06]
Uhlelo [0x09]	Ayisebenzi [0x00]
	Ukuhluleka kwehadiwe yesistimu enekhodi yokwehluleka kobunikazi bomkhiqizi [0x03]	Ikhodi ye-MP: 0x01 [ukushisa kwedivayisi]	0xFF - vumela (akushintsheki)	Impande

Ukuvikelwa CC
I-Protection Command Class ivumela ukuvimbela isilawuli sasendaweni noma esikude kokuphumayo.

Ithebula A16 – Roll-Control 2 – Protection CC
Uhlobo	Izwe	Incazelo	Ukusikisela
Indawo	0	Akuvikelekile - Idivayisi ayivikelekile, futhi ingase isetshenziswe ngokujwayelekile ngokusebenzisa isixhumi esibonakalayo somsebenzisi.	Izinkinobho ezixhunywe nokuphumayo.
Indawo	2	Akukho ukusebenza okunokwenzeka - inkinobho ayikwazi ukushintsha isimo sokudlulisa, noma yikuphi okunye ukusebenza kuyatholakala (imenyu).	Izinkinobho zinqanyuliwe kokuphumayo.
RF	0	Okungavikelwe - Idivayisi yamukela futhi iphendule kuyo yonke Imiyalo ye-RF.	Okukhiphayo kungalawulwa nge-Z-Wave.
RF	1	Akukho ukulawula kwe-RF - okuyisisekelo sekilasi lomyalo kanye nokushintsha kanambambili kwenqatshiwe, zonke ezinye izigaba zomyalo zizophathwa.	Okukhiphayo akukwazi ukulawulwa nge-Z-Wave.

Imitha CC 

Ithebula A17 – Roll-Control 2 – Meter CC
Uhlobo lweMitha	Isikali	Linganisa Uhlobo	Ukunemba	Usayizi
Ugesi [0x01]	I-Electric_kWh [0x00]	Ngenisa [0x01]	1	4

Ukushintsha amakhono

I-NICE Roll-Control 2 isebenzisa isethi ehlukile yama-ID Epharamitha Yesimbozo Sewindi kuye ngamavelu amapharamitha angu-2:

• Isimo sokulinganisa (ipharamitha 150),
• Imodi yokusebenza (ipharamitha 151).

Ithebula A18 – Roll-Control 2 – Amandla okushintsha
Isimo sokulinganisa (ipharamitha 150)	Imodi yokusebenza (ipharamitha 151)	Ama-ID Epharamitha Yesembozo Sewindi Asekelwe
0 – Idivayisi ayilinganisiwe noma2 – Ukulinganisa okuzenzakalelayo kwehlulekile	I-0 - Impumputhe ye-roller, i-Awning, i-Pergola, ikhethini	ngaphandle_phansi (0x0C)
0 – Idivayisi ayilinganisiwe noma2 – Ukulinganisa okuzenzakalelayo kwehlulekile	1 - Impumputhe yaseVenetian engu-90 ° noma2 - Impumputhe yerola enomshayeli owakhelwe ngaphakathi ongu-180 °	out_bottom (0x0C) I-engeli yama-slats evundlile (0x16)
1 - Ukulinganisa okuzenzakalelayo kuphumelele noma4 - Ukulinganisa okwenziwa ngesandla	I-0 - Impumputhe ye-roller, i-Awning, i-Pergola, ikhethini	ngaphandle_phansi (0x0D)
1 - Ukulinganisa okuzenzakalelayo kuphumelele noma4 - Ukulinganisa okwenziwa ngesandla	1 - Impumputhe yaseVenetian engu-90 ° noma2 - Impumputhe yerola enomshayeli owakhelwe ngaphakathi ongu-180 °	out_bottom (0x0D) I-engeli ye-slats evundlile (0x17)

Uma noma yimaphi amapharamitha angu-150 noma angu-151 ashintsha, isilawuli kufanele senze inqubo yokuthola kabusha ukuze sibuyekeze isethi yama-ID Asekelwe Epharamitha Yekhava Yewindi.
Uma isilawuli singenayo inketho yokuphinda uthole amandla, kuyadingeka ukuthi uphinde ufake i-node kunethiwekhi.
Inhlangano Yeqembu Lezinhlangano CC 

Ithebula A19 – Roll-Control 2 – Association Group Information CC
Iqembu	UProfile	Isigaba se-Command & Command	Igama leqembu
1	Okujwayelekile: I-Lifeline (0x00: 0x01)	DEVICE_RESET_LOCALLY_NOTIFICATION [0x5A 0x01]	I-Lifeline
		NOTIFICATION_REPORT [0x71 0x05]
		SWITCH_MULTILEVEL_REPORT [0x26 0x03]
		WINDOW_COVERING_REPORT [0x6A 0x04]
		CONFIGURATION_REPORT [0x70 0x06]
		INDICATOR_REPORT [0x87 0x03]
		METER_REPORT [0x32 0x02]
		CENTRAL_SCENE_CONFIGURATION_ UMBIKO [0x5B 0x06]
2	Ukulawula: KEY01 (0x20: 0x01)	WINDOW_COVERING_SET [0x6A 0x05]	Ukuvala Iwindi
		WINDOW_COVERING_START_LVL_ SHINTSHA [0x6A 0x06]
		WINDOW_COVERING_STOP_LVL_ CHANGE [0x6A 0x07]

IWARANTI

Siqinisekisa ukuthi lo mkhiqizo ungabi nasici ezintweni ezibonakalayo kanye nokusebenza ngaphansi kokusetshenziswa okuvamile nokufanelekile unyaka owodwa kusukela ngedethi yokuthenga yomthengi wokuqala. Ngokukhetha kwayo, sizolungisa noma sishintshe noma iyiphi ingxenye yemikhiqizo yayo ebonakala inephutha ngenxa yokwenziwa komsebenzi okungafanele noma izinto zokwakha. LESI SIQINISEKISO ESINOMKHAWULO ASIYIMALI YIMUPHI YONA YONA YOMKHIQIZO OBUPHUMA EKUFAKENI OKUNGEFANELE, INGOZI, UKUHLUKUNYEZWA, UKUSETSHENZISWA KAHLE, Inhlekelele yemvelo, UKUNIKEZELWA KA kukagesi OKUNGANELELI NOMA OKWEdlulele, UKUNIKEZWA KA kukagesi OKUNGEJWAYELEKILE, OKUNGEZESIFUNDAZWE. UKUQHULISA, UKULUNGISA NOMA UKULUNGISWA. Lesi siqinisekiso esilinganiselwe ngeke sisebenze uma: (i) umkhiqizo ungasetshenziswanga ngokuhambisana nanoma yimiphi imiyalelo ehambisana naso, noma (ii) umkhiqizo ungazange usetshenziselwe umsebenzi owawuhlosiwe. Lesi siqiniseko esinomkhawulo asisebenzi kunoma yimuphi umkhiqizo lapho ulwazi lokuhlonza lwangempela lushintshiwe khona, lwacishwa noma lwasuswa, olungaphathwanga noma lwapakishwa ngendlela efanele, odayisiwe njengesekeni noma obuye wadayiswa ngokuphambene nezwe. eminye imithetho esebenzayo yokuthekelisa.

IMITHETHO

Izaziso Zomthetho:
Lonke ulwazi, okuhlanganisa, kodwa alukhawulelwe, ulwazi olumayelana nezici, ukusebenza, kanye/noma okunye ukucaciswa komkhiqizo kungashintsha ngaphandle kwesaziso. I-NICE igodle wonke amalungelo okubuyekeza noma okuvuselela imikhiqizo yayo, isofthiwe, noma imibhalo ngaphandle kwanoma yisiphi isibopho sokwazisa noma yimuphi umuntu noma inhlangano.
Ilogo ye-NICE wuphawu lokuthengisa lwe-NICE SpA Oderzo TV Italia Zonke ezinye izinhlobo namagama emikhiqizo okubhekiselwe kuwo lapha yizimpawu zokuthengisa zabanikazi bazo abahlukene.

Ukuthobela Umyalelo WeEE
Idivayisi efakwe lolu phawu akufanele ilahlwe nezinye izibi zasendlini.
Izodluliselwa endaweni efanele yokuqoqa ukuze kugaywe kabusha izinto ezilahlwayo zikagesi neze-elekthronikhi.
Isimemezelo sokuvumelana


Ngalokhu, i-NICE SpA Oderzo TV Italia imemezela ukuthi idivayisi ithobela izimfuneko ezibalulekile nezinye izinhlinzeko ezifanele ze-Directive 2014/53/EU. Umbhalo ogcwele we-EU declaration of conformity uyatholakala kuleli kheli le-inthanethi elilandelayo: www.niceforyou.com/en/download?v=18

I-SpA enhle
I-Oderzo TV Italia
info@niceforyou.com

Amadokhumenti / Izinsiza

I-Nice Wave Blind ne-Awning Controller [pdf] Incwadi Yeziqondiso I-Wave Blind ne-Awning Controller, Isilawuli esiyimpumputhe nesesisithongwane, Isilawuli se-Awning, Isilawuli

Izithenjwa

• Imaniwali yosebenzisayo