1. Prerequisites
2. Configuration
3. Conversion
4. Simulation
5. Evaluation

This repository shows how to convert a complex VHDL design into a single, synthesizable, plain-Verilog module using GHDL's synthesis feature. The example in this repository is based on the NEORV32 RISC-V Processor, which is written in platform-independent VHDL. The resulting Verilog module can be instantiated within an all-Verilog design and can be successfully simulated and synthesized - tested with Xilinx Vivado and Intel Quartus (see section Evaluation).

Detailed information regarding GHDL's synthesis feature can be found in the GHDL synthesis documentation.

1. Clone this repository recursively to include the NEORV32 submodule.

2. Install GHDL. On a Linux machine GHDL can be installed easily via the package manager. :warning: Make sure to install a version with --synth option enabled (should be enabled by default). GHDL version 3.0.0 or higher is required.

$ sudo apt-get install ghdl

3. Test the GHDL installation and check the version.

$ ghdl -v
GHDL 4.0.0-dev (3.0.0.r823.g9e2b6fc95) [Dunoon edition]
 Compiled with GNAT Version: 9.4.0
 static elaboration, mcode code generator
Written by Tristan Gingold.

Copyright (C) 2003 - 2023 Tristan Gingold.
GHDL is free software, covered by the GNU General Public License.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

[back to top]

GHDL's synth option is used to convert the whole NEORV32 processor - including all peripherals, memories and memory images - into a single plain-Verilog module file.

To ease configuration and customization a minimal VHDL wrapper src/neorv32_verilog_wrapper.vhd is provided. This wrapper can be used to configure the processor setup according to the requirements. The default wrapper from this repository only implements a minimal subset of the available configuration options and interfaces - just enough to run the processor's built-in bootloader.

Have a look at the original processor top entity (neorv32_top.vhd) and just copy the generics and ports that you would like to use for the Verilog setup. Note that all NEORV32 interface inputs and configuration generics do provide default values.

[back to top]

The actual conversion is conducted by a conversion shell script, which analyzes all the processor's sources and finally calls GHDL synth to create the final Verilog code neorv32-verilog/src/neorv32_verilog_wrapper.v.

neorv32-verilog/src$ sh convert.sh

After conversion, the interface of the resulting neorv32_verilog_wrapper Verilog module is shown in the console. This can be used as instantiation template.

------ neorv32_verilog_wrapper interface ------
module neorv32_verilog_wrapper
  (input  clk_i,
   input  rstn_i,
   input  uart0_rxd_i,
   output uart0_txd_o);
-----------------------------------------------

• GHDL synthesis generates an unoptimized plain Verilog code without any (technology-specific) primitives. However, optimizations will be performed by the synthesis tool (e.g. mapping to FPGA primitives like block RAMs).
• The interface of the resulting NEORV32 Verilog module lists all inputs first followed by all outputs.
• The original NEORV32 module hierarchy is preserved as well as most (all?) signal names, which allows easy inspection and debugging of simulation waveforms and synthesis results.
• Custom VHDL interface types and records are collapsed into linear arrays.

[back to top]

This repository provides a simple Verilog testbench that can be used to simulate the default NEORV32 configuration. The testbench includes a UART receiver, which is driven by the processor UART0. It outputs received characters to the simulator console.

A pre-configured simulation script based on Icarus Verilog can be used to simulate the Verilog setup (takes several minutes to complete):

neorv32-verilog/sim$ sh iverilog_sim.sh
neorv32-verilog verification testbench




<< NEORV32
Simulation successful!
./testbench.v:79: $finish called at 95372250 (100ps)

The simulation is terminated automatically as soon as the string "NEORV32" has been received from the processor's bootloader. In this case Simulation successful! is printed to the console. If Simulation terminated! appears in the simulator console the simulation has failed.

Prebuilt Icarus Verilog binaries for Linux can be downloaded from stnolting/icarus-verilog-prebuilt.

[back to top]

It's time for a "quality" evaluation of the auto-generated Verilog. Therefore, two projects were created: a pure Verilog one using the auto-generated src/neorv32_verilog_wrapper.v file and a pure VHDL one using the provided src/neorv32_verilog_wrapper.vhd file. For both projects a simple top entity was created (again, a Verilog and a VHDL version) that instantiate the according neorv32_verilog_wrapper module together with a PLL for providing clock (100MHz) and reset.

The default configuration of the wrapper was used:

• Memories: 16kB IMEM (RAM), 8kB DMEM (RAM), 4kB internal bootloader ROM
• CPU: rv32imc_Zicsr_Zicntr_Zifencei
• Peripherals: UART0, GPIO, MTIME

Both setups were synthesized for an Intel Cyclone IV E FPGA (EP4CE22F17C6) using Intel Quartus Prime 21.1.0 with default settings ("balanced" implementation). The timing analyzer's "Slow 1200mV 0C Model" was used to evaluate the maximum operating frequency f_max. Additionally, both setups were (successfully! 🎉) tested on a Terasic DE0-nano FPGA board.

[back to top]