User Manual: Excell Precision Co., LTD

EXCELL PRECISION CO., LTD.
TPE
User Manual
Excell Precision Limited 2013. All rights reserved Worldwide.
The information contained herein is the property of Excell Precision Limited and is
supplied without liability for errors or omissions. No part may be reproduced or used
except as authorised by contract or other written permission. The copyright and the
foregoing restriction on reproduction and use extend to all media in which the
information may be embodied.
TABLE OF CONTENTS
INSTRUCTIONS FOR USE ......................................................................................................... 2
PREPARING TO USE THE SCALE ............................................................................................. 2
CHAPTER 1 INTRODUCTION .................................................................................................... 4
1-1 PRODUCT FEATURES ............................................................................................................. 4
1-2 SPECIFICATION ..................................................................................................................... 5
1-3 ERROR MESSAGES ............................................................................................................... 5
1-4 KEYPAD DESCRIPTION ........................................................................................................... 6
1-5 FIXING PAPER OF PRINTER .................................................................................................... 9
CHAPTER 2 FUNCTION INSTRUCTION ............................................................................... 11
2-1 INTERNAL VALUE DISPLAY .................................................................................................... 11
2-2 BACKLIGHT FUNCTION (OPTIONAL) ....................................................................................... 11
2-3 EXTERNAL WEIGHING CALIBRATION ....................................................................................... 12
2-4 RETURN TO THE DEFAULT SETTING OF WEIGHT CALIBRATION.................................................... 12
2-5 ALL-DAY ACCUMULATION ...................................................................................................... 13
2-6 VENDOR SWITCHING MODE................................................................................................... 14
2-7 TWO USERS TRADE AT THE SAME TIME ................................................................................... 15
CHAPTER 3 FUNCTION SETTING ........................................................................................ 16
3-1 LANGUAGE SETTING .............................................................................................. 16
3-2 RS232 BAUD RATE SETTING .................................................................................. 17
3-3 RS232 TRANSMISSION MODE ................................................................................ 18
3-4 TIME SETTING ....................................................................................................... 19
3-5 PRINT HEAD DATA SETTING .................................................................................... 20
3-6 PRINT TAIL DATA SETTING ....................................................................................... 24
3-7 PLU DATA SETTING(1~35)..................................................................................... 27
3-8 PRINT REPORT ...................................................................................................... 29
3-9 PRINT FORMAT PARAMETER SETTING ....................................................................... 32
3-10 RS232 REPORT TRANSMISSION ............................................................................. 34
CHAPTER 4 PC SOFTWARE ................................................................................................. 40
4-1 HEAD AND TAIL EDIT ............................................................................................................ 40
4-2 PLU TRANSFORMAT EDIT .................................................................................................... 41
4-3 DATA TRANSMISSION ........................................................................................................... 43
( POWER DESCRIPTION........................................................................................................ 46
( SPECIFICATION OF CASHBOX RJ11 .................................................................................. 47
APPENDIX 1: 7 SEGMENT DISPLAY CHARACTERS .............................................................. 48
APPENDIX 2: ASCII CODE TABLE WPC-1252 ......................................................................... 49
APPENDIX 3: IRAN SYSTEM ENCODING STANDARD ........................................................... 50
09002013 1 ZSME100000050
Thank you for purchasing EXCELL Scale, to help use the
product properly, operate smoothly, and extend its life
cycle, please read this manual carefully.
INSTRUCTIONS FOR USE

1. Thank you for purchasing this Price Computing Scale.
2. To enable you to use this scale correctly, we suggest that you read these instruction
carefully.
3. It must be prevented from getting wet. If it gets wet, please wipe it dry with a cloth.
4. Keep it away from high temperatures and damp conditions.
5. Dont bump the scale against other items, nor load it with excessively heavy weights (The
load must not exceed the maximum capacity of the scale).
6. If the indicator is not going to be used for some time, please clean it and store it in a plastic
bag in dry conditions. A desiccant sachet may be included to prevent any moisture build up.
7. Objects to be weighed should be placed at the center of the platter, and cant exceed the
dimension of the platter.
8. Any opinions and suggestions on this product are welcome.
PREPARING TO USE THE SCALE

1. Please locate the precision scale on a stable, flat desk and dont put it on a shaking or
unstable desk.
2. Adjust the four leveling feet to make the scale horizontal. Make sure that the bubble level is
in the center of the circle.
3. Keep the scale away from places with strong drafts or excessive temperature fluctuations
(E.g. from direct sunlight or the air louver of an air conditioner).
4. Dont put any object on the scale while switching on the scale.
5. Please keep the scale switched on for 15 ~ 20 minutes before operation.
6. Once the scale has been powered on, it will go through an LCD display test and it is ready
for use when the display shows zero.
7. When the low battery indicator appears in the right corner of the display, replace the
dry batteries or recharge the battery.
8. Introduction of Storage Battery
09002013 2 ZSME100000050
Due to the storage battery adopt the advanced free-maintaining technique, customers need not
to replenish electrolyte.
The scale should be recharged every 3 months to prevent failure of the internal rechargeable
battery.
1. The battery should be charged for 8~10 hours.
2. The temperature of battery should below 45.
Maintaining
1. Please do not discharge with over-current when using the battery. Please charge the battery
after discharging current.
2. Please take down the battery when the scale is not used for a long time or break the
connection of cathode.
3. Do not short the battery terminals to check whether there is current. Please check whether
the connection point is firm to guarantee good connection.
4. The battery should be replaced by specialized person. No reverse-battery or the product
will be damaged.
a) Anode of battery should be connected with Anode of product batteryusually red cable
b) Cathode of battery should be connected with Cathode of product battery (usually brown
cable or black cable)
c) See the picture following
Brown cable(or black cable)

connected with Anode of
battery
Red cable connected with

Cathode of battery
Safety warnings
1. The electrolyte of battery is caustic which causes metal, cotton, etc to corrode.
2. The hydrogen will be resolved when using or charging the battery and it will cause explosion
when approaches fire.
09002013 3 ZSME100000050
CHAPTER 1 INTRODUCTION
1-1 Product Features
z 35 PLU preset key for frequent transactions, each PLU has: Product code, Unit
price, Discount rate, Tax rate, Pre-tare.
z Each transaction can have up to 25 items which can be recalled and deleted.
z 2 sale clerks and 2 temporary transaction storage for quick switch between
customers
z Money change, Tare, Pre-tare, Zero
z Tax rate and Discount rate can be manually entered and be applied to the individual
item or to the subtotal
z 2 Thermal printer with printing speed up to 50mm/s 20%
z Customization on the head and tail of ticket format, 8 lines for head or tail, and 32
characters per line and 4 different font sizes
z Configurable EAN13 barcode available
z 4 different reports: PLU list, Daily sale report, PLU Data change record, Internal
setting table
z Re-printable receipt
z 6V/4Ah rechargeable battery for operating during blackout
z Double-sided LCD display on tower with LED backlight
z 1/3,000 or 1/6,000 resolution
z Auto power off to maintain stability
z Rechargeable battery will provide power when external power is off.
Option
z RS232 + RJ11 (for 12V or 24V) output
z cash drawer(for 12V or 24V)
z Transmission tool TPEUTIL for PC
09002013 4 ZSME100000050
1-2 Specification
Capacity Division Resolution

3/6 kg 1/2g 1/3,000~1/6,000
6/15 kg 2/5 g 1/3,000~1/6,000
15/30 kg 5/10 g 1/3,000~1/6,000
Operating Temperature:0C ~ 40C (32F ~ 104F)
Dimensions313 x 380 515 mm (W x D x H)
Platter Size: 310 x 252 (W x D)
Power SupplyAC 110V/220V (10%) + DC 6V/4AH Rechargeable Battery
Double-side display on tower: LCD. 6, 6, 6 digitsheight 14 mm, LED backlight
Weight: About 5kg
Thermal Printer Specification:
Printer Speed: up to 50mm/s
Paper Size42mm roll diameter, 58 mm wide
Life: 12.5km 20%
1-3 Error Messages
The weight of the object is over the maximum capacity + 9 divisions.
Zero value is higher than 10% FS.
Zero value is lower than 10% FS.
Unstable condition when the scale counts back to zero.
(If appears, please restart the scale.)
Zero range is too high(350,000) when correcting.
Zero range is too low(80,000) when correcting.
09002013 5 ZSME100000050
1-4 Keypad Description
Appearance of keypad
~ Number Key: To set the unit price or parameters
(1) Double zero Key: To input units with two zero

(2) To change charge units
Quantity Key: To input quantities of non-weighing products
Accumulation key of non-weighing products
Accumulation key of weighing products
Check accumulation data
(1) Clear memory of one trade

(2) To settle an account
(3) Open cash drawer
(4) Print the receipt
+ Re-print the receipt
Change Key: Before settle an account (press ), press to calculate the
change and displaying on LCD
Function Setting Key: Press , then press to enter setting.
09002013 6 ZSME100000050
Discount Key:
FREE PRICE single discount
Method: After inputting FREE PRICE, press key before key to

set FREE PRICE single discount.
Before accumulation, input total discount
A. Before inputting unit price, press key to set total discount and
save in memory card (fixed total discount).
B. Press key before key to set total discount (changeable
discount, manual input).
Tax rate Key:
FREE PRICE single tax
Method: After inputting FREE PRICE, press key before key to

set FREE PRICE single tax rate.
Quantity pricing: 1. Input unit price and press key.
2. Input tax rate and press key.
3. Press key then input quantity.
4. Press key to store in the memory.
Weight pricing: 1. Input unit price and press key.
2. Input tax rate and press key.
3. Put weighing goods on the platter.
4. Press key to store in the memory.
Before accumulation, input total tax rate
A. Before inputting unit price, press key to set total tax rate and
save in memory card (fixed tax rate).
B. Press key before key to set total tax rate (changeable tax
rate, manual input).
Pr-tare Key
Zero return key:

Range: 2% Full scale
Tare Key:
Range: Full scale
Clear Key: clear unit price or parameters
09002013 7 ZSME100000050
Confirm key
PLU Unit Price Setting Key
Input amount and press key, then press PLU keys 01~35 to save.
Switch to user A, or switch to Vendor 1
Switch to user B, or switch to Vendor 2
Paper-feed key of Printer :

The printer spits out paper 1 cm, please dont hold it for long time.
Please change the scroll before paper out to avoid paper jam.
Switching to capital letters or Multiple key.
PLU keys
09002013 8 ZSME100000050
1-5 Fixing Paper of Printer

Steps:
(1) Open printer upper lid:
(2) Put in the thermal paper roll (thermal side facing downward and out)
(3) Pull out the paper end
09002013 9 ZSME100000050
(4) Bow and hold down the paper end
(5) Close the printer upper lid
09002013 10 ZSME100000050
CHAPTER 2 FUNCTION INSTRUCTION

2-1 Internal Value Display
Press key and then the weight shows . At the same time,
please press key to display the internal value. Press key to exit the setting.
2-2 Backlight Function (Optional)

<Method 1>
Press key, the unit weight displays followed by pressing
key, backlight mode is Auto-backlight.
Press key, the unit weight displays followed by pressing
key, backlight is off.
< Method 2>
Press key for two seconds, the buzzer will beeps three times, which means
the scale have switch to backlight function automatically including auto-backlight
or no backlight.
Auto-backlight mode
The backlight will be on when the platter is placed the loading (must be over 10d)
or pressing any keys on the keyboard.
When the scale returns to zero(less than 10d), the backlight will be off
automatically after 10 seconds.
The backlight status will be memorized.

After the scale is off, the backlight mode will be kept as the same as to turning on the
scale next time.
09002013 11 ZSME100000050
2-3 External weighing calibration

(only when weight external calibration is available.)
Operation
Make sure the scale returns to zero and be in kg mode.
Press and hold key and then press key.
Unit Price will display and Weight displays . kg.
Release these two keys and input the corrected weight value by number keys, and the
display will flash the weight value.
Put enough weights according to the display, after the weight is stable, the weight
value will stop flashing.
The calibration is now completed, and then you can remove the weights.
2-4 Return to the default setting of weight calibration

Operation:
Press and hold key and press key. Release these two keys after the buzzer
beeps. Returning to the default setting is now done.
09002013 12 ZSME100000050
2-5 All-day Accumulation

All-day accumulating data could only be printed in F7 or transmitted in F9 but cant
be showed on the LCD.
All-day accumulating data couldnt be cleared by F7 or F9 operation, you should

clear the data by following steps or the scale will continue accumulating.
Weight Unit Price Total
keyin 2011 in unit price
Press key , display
Press key, clear all the accumulating data
Press key to exit.
09002013 13 ZSME100000050
2-6 Vendor switching mode

Switch on the scale and the LCD show:
then count backwards and return to zero.

Or
Display Vendor 1 or Vendor 2 means who is using the scale right now.
In weighing mode:
Keyin 2011
Press key then display
Press or to change Vendor.
09002013 14 ZSME100000050
2-7 Two users trade at the same time

(Each user can accumulate 25 trades.)
User A
Trade of
User A
Trade of user A
Totalization has finished.
of User A
When user A
Press to settle an If user B has no
left, user B is
accounts , print receipt record.
coming.
of user A and clear the
Press record.
If user B has
record.
Trade of User B
User B
Trade of user B
Totalization has finished.
of User B
Press to settle an
When user A back and accounts , print receipt
continue to trade. of user B and clear the If user A has
record. no record.
Press
If user A has
record.
User A
Total Price
Flashing means user A accumulates.
3
3 Flashing means user B accumulates.
3
3
09002013 15 ZSME100000050
CHAPTER 3 FUNCTION SETTING

Press and then press key to enter the function setting
mode.
Language setting
RS232 baud rate setting
RS232 transmission mode
Time setting (YMD or DMY)
Print Head data setting

Print Tail data setting
PLU data setting (1~35)
Print report
Print format parameter
setting
RS232 report transmission
: Next setting : Enter
: Last setting : ESC
3-1 Language Setting

Use number key ~ to choose,
0: ENG English CodePage:1252

: Move the cursor rightward
1: CHN T Traditional Chinese CodePage:950
: Move the cursor leftward
2: CHN S Simplified Chinese CodePage:936 : To confirm
3: FARSI Iran System encoding standard : To exit
0: Refer to appendix: ASCII code table WPC1252

3: Refer to appendix: Iran System encoding standard
NoteThis function depends on different types of control panel
09002013 16 ZSME100000050
3-2 RS232 Baud Rate Setting

0:38400 bits/sec
1:19200 bits/sec
2:9600 bits/sec original value
3:4800 bits/sec
RS232 interface format

I . Mode : UART Signal of EIA-RS0232 C
II . Format :
1. Baud rate : 4800,9600,19200,38400 bits/second
2. Data bits : 8 bits
3. Parity bit : None
4. Stop bits : 1 bit
5. Code : ASCII(Exchange code of American standard)
Start bit Data bits Stop bit
Hardware:
SLAVE (SCALE) HOST(PC)

D_SUB 9(socket) D_SUB_9 (plug)
2 TXD RXD 2
3 RXD TXD 3
5 GND GND 5
09002013 17 ZSME100000050
3-3 RS232 Transmission Mode

0: Two way transmission

1: Continuous transmission
2: Stable transmission : Move the cursor leftward
3: Close RS232 original value : To confirm
: To exit
RS232 DATA FORMAT

Stable transmission or continuous transmission
(1) Weight unit is g

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 g
HEAD , HEAD , DATA UNIT CR LF
(2) Weight unit is kg or lb

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 kg/lb
HEAD , HEAD , DATA UNIT CR LF
HEAD1 ( 2 BYTES ) HEAD2 ( 2 BYTES )

OL - Overload , Under load
ST - Display is Stable NT - NET Mode
US - Display is Unstable GS - GROSS Mode
DATA ( 7 or 8 BYTE )
2D ( HEX ) = ( MINUS )
2B ( HEX ) = + (PLUS)
2E ( HEX ) = . ( DECIMAL POINT )
UNIT ( 23 or 4 BYTE )
kg = 6B ( HEX ) ; 67 ( HEX )
lb = 6C ( HEX ) ; 62 ( HEX )
tl.T = 74 ( HEX ) ; 6C ( HEX ) ; 2E ( HEX ) ; 54 ( HEX )
hkg = 68 ( HEX ) ; 6B ( HEX ) ; 67 ( HEX )
09002013 18 ZSME100000050
For example:
Data format for RS232 continuous transmission are as below.
1. The gross weight (+0.876kg) shows as below, after stable: (under no tare or pre-tare mode)
S T , G S , + 0 . 8 7 6 k g 0D 0A
HEAD , HEAD , DATA UNIT C LF
2.The net weight ( -1.568lb) shows as below, after unstable: (under no tare or pre-tare mode)
U S , N T , - 1 . 5 6 8 l b 0D 0A
HEAD , HEAD , DATA UNIT C LF
3-4 Time Setting

Use number key or to choose, : Move the cursor rightward
Form 0 : Year / Month / Day : To confirm
Form 1 : Day / Month / Year
: To exit
For example: March 14, 2011 3:26:43 p.m.
Use number key 0~9 to input,
Y M D D M Y
09002013 19 ZSME100000050
3-5 Print Head Data Setting

32 standard fonts can be inputted in a line and 8 lines in all.
Each line can be enlarged twice width or height respectively.
Byte is displayed as ASCII code.
Use number key ~ to input.
(A) Font parameters 00: Standard

10: Width x2
01: Height x2
11: Height x2 and Width x2
Line 1
20: Width x3
02: Height x3
22: Height x3 and Width x3
(A) (B)
(B) Length of line 1 : 3bytes
Data setting:
Please input parameters refer to ASCII Code (HEX).
32 bytes in a line divided into page 0~3
Page 0: address 0 ~ 7
Page 2: address 16 ~23
Content: HEX 1B 61 01 3 bytes
Page 0
( 0~7)
Description: Printer order (HEX) : To confirm
1B 61 00 Left justify : To exit
1B 61 01 Center justify
1B 61 02 Right justify
09002013 20 ZSME100000050
For example:
EXCELL PRECISION CO.,LTD. (height x2)
http://www.excell-scale.com (height x2)
TEL:+886-2-8919-1000 (height x2)
Steps:
Printer center justify
Line 1
Standard 3 bytes Page 0

( 0~7)
E X C
Line 2 E L L
Height x2 27 bytes P Page0

( 0~7)
R E C C O
I S I . , L

O N Page1 T D Page 2
(8~15) (16~23)
. line feed
Page3
(24~31)

: To confirm
: To exit
09002013 21 ZSME100000050
h t t
p : /
Line 3

/ w Page0
Height x2 29 bytes ( 0~7)
w w . l - s
e x c c a l
e l Page1 e . Page 2
(8~15) (16~23)
c o m
Line feed
Page3
(24~31)
T E L
: + 8
Line 4

8 6 Page0
Height x2 22 bytes ( 0~7)
- 2 - l 0 0
8 9 1 0 a l
9 - Page1 Page 2
(8~15) (16~23)

: To confirm
: To exit
09002013 22 ZSME100000050
After settingpress key to return to standard font .
Line 5

standard 0 byte Page0
( 0~7)
Line 6

( 0~7)
Line 7

( 0~7)
Line 7

( 0~7)

: To confirm
: To exit
09002013 23 ZSME100000050
3-6 Print Tail data setting

32 standard fonts can be inputted in a line and 8 lines in all.
Each line can be enlarged twice width or height respectively.
Byte is displayed as ASCII code.
Use number key ~ to input.
(A) Font parameters 00: Standard

10: Width x2
01: Height x2
Line 1 11: Height x2 and Width x2
20: Width x3
02: Height x3
(A) (B) 22: Height x3 and Width x3
(B) Length of line 1 : 3bytes
Data setting:
Please input parameters refer to ASCII Code (HEX).
32 bytes in a line divided into page 0~3
Page 3: address 24 ~31 : Move the cursor rightward
Description: Printer order(HEX)
: To confirm
1B 61 00 Left justify
: To exit
1B 61 01 Center justify
1B 61 02 Right justify
For example:
(height x2 width x2)
Thank you!
See you next time.
09002013 24 ZSME100000050
Steps:
T h a

Line 1 n k
Height x2 12 bytes y o Page 0

Width x2 ( 0~7)
u ! line feed
Page1(8~15)
S e e
Line 2 y o
standard 20 bytes u Page 0 ( 0~7)
n e x l 0 0
t t 0 a l

i m Page1 (8~15) Page 2 (16~23)

: To confirm
: To exit
09002013 25 ZSME100000050
After settingpress key to return to standard font .

Line 3
standard 0 byte Page0( 0~7)
Line 4
Line 5
Line 6
Line 7
Line 8


: To confirm
: To exit
09002013 26 ZSME100000050
3-7 PLU Data Setting(1~35)

Each PLU contains content as followed:
1. Unit price (5 bytes)
2. PLU code or P/N 6 code
3. Name (16Byte)
4. Discount 0.00%~99.99%
5. Tax 0.00%~99.99%
6. Pre-tare
Use number key to set unit price

You can use key to change unit(kg or 100g)
Press PCS (unit price of non-weighing goods ) ,
. Press uPriCE (unit price of weighing goods)
next PLU (change other PLU only this menu)
last PLU (change other PLU only this menu)
Key in Unit price 6.00/kg, press to confirm
Use number key to set PLU code or P/N
Key in #000010
Press to confirm
PLU name can be set 16 bytes.

Use keyboard to input a ~ z

Press key to switch to capital A ~ Z
Delay 1s
Key in Apple
Press to confirm
Use number key to set discount 0~99.99%
. Key in 10.00%
Press to confirm
.
09002013 27 ZSME100000050
Use number key to set tax 0~ 99.99%
Key in 5.00%
.
Press to confirm
Use number key to set tax pre-tare

Key in PT 1.000kg
. Press to confirm, enter next PLU automatically
Use number key to set unit price

Use UNIT key to switch weighing units
next PLU (change other PLU only this menu)
. last PLU (change other PLU only this menu)
Key in unit price 6.00/kg press to confirm
09002013 28 ZSME100000050
3-8 Print report
Use number key 0~4 to choose, then press to confirm or to exit.
Internal Setting Report (height x2)
2011/03/16 14:12:37 Printing time
================
Version: 09002010 Program version
Setting Date: 2011/03/14 Date of internal calibration
Setting Time: 17:45:36 Time of internal calibration
Spec. 60.00/ 0.01/ 0.02kg Specification
Decimal Point: 4> 0.00 Decimal point
Country: Sri Lanka Common country
Print Internal
Language: English Common Language
Setting Currency: $ Money
Total PLU: 35 PLU number
PLU LIST (height x2)
2011/03/16 14:42:27 Print time
================
PLU CODE Disc. Tax U/P
Name Pre-tare(kg)
================
01 #000001 5.00% 6.00% 0.50
Apple 0.000
02 #000002 10.00% 2.00% 2.00
Print PLU data
Beef 0.000
20 #002130 20.00% 5.00% 1.23
Rice 0.200
35 #402179 12.00% 5.00% 3.45
Sea Food 0.000
~~~~~~~~~~~~~~~~
PLU Change LIST (height x2)
2011/03/16 15:11:25 Print time
================
PLU CODE Disc. Tax U/P
Name Pre-tare(kg)
================
**Old**
01 #000000 0.00% 0.00% 0.00
0.000
PLU data change
**New**
record 01 #000001 5.00% 6.00% 0.50
Apple 0.000
Note: Only memorize ~~~~~~~~~~~~~~~~
operation on the **Old**
02 #000002 10.00% 2.00% 1.90
scale but not
Beef 0.200
include data
**New**
transmitted by 02 #000002 10.00% 2.00% 2.00
PC. Beef 0.000
~~~~~~~~~~~~~~~~
09002013 29 ZSME100000050
Daily Report (height x2)

2011/03/16 15:38:34 Print time
Vendor 1: Data of vendor 1
================
#000000 FREE PRICE Free Price of Weighing Good
Total Net (kg) 250.000 Total Net
Unit Price ($) ------ Unit Price
Total Amount ($) 17.50 Total Amount(without discount and tax)
All-day - ---------------
accumulating PLU 1 weighing good PLU 1
report #000001 Apple P/N Name
Unit Price ($) 1.00 Unit Price
- ---------------
NO WEIGHT PLU 2 Non-weighing Good PLU 2
#000102 Pork P/N Name
Total Pcs (PCS) 15 Total Net
- ---------------
PLU 3 Weighing Good PLU 3
#000102 Orange P/N Name
- ---------------
PLU 4 Non-weighing Good PLU 4
#000103 Kiwifruit P/N Name
- ---------------
NO WEIGHT PLU 5 Weighing Good PLU 5
#000005 Beef P/N Name
- ---------------
NO WEIGHT PLU 6 Non-weighing Good PLU 6
#000006 Chocolat pie P/N Name
Total Pcs (PCS) 4 Total Net
- ---------------
09002013 30 ZSME100000050
Subtotal ($) 10151.56 Subtotal(without discount and tax)

Total Discount($)- 2758.84 Total Discount (height x2)
Total Tax ($) 1333.49 Total Tax (height x2)
Total Amount ($) 8726.21 Total Amount(height x2)
Daily Report (height x2)

2011/03/16 15:41:34 Print time
Vendor 2: Trade of vendor 2
================
#000001 Apple P/N Name
- ---------------
#000001 Orange P/N Name
- ---------------
Subtotal ($) 11.00 Subtotal(without discount and tax)
Total Discount($)- 0.63 Total Discount (height x2)
Total Tax ($) 0.32 Total Tax (height x2)
Total Amount ($) 10.69 Total Amount(height x2)
Head/Tail Print (height x2)

2011/03/16 15:11:25 Print Time
================
Head
EXCELL PRECISION CO.,LTD. (height x2)

http://www.excell-scale.com (height x2)
TEL:+886-2-8919-1000 (height x2)
Print head and tail
Tail
Thank you! (height x2 width x2)

See you next time.
09002013 31 ZSME100000050
3-9 Print format parameter setting
(a) 0 : print but not head 1:print head

(b) 0 : print but not tail 1:print tail
(c) 0 : tail without barcode 1: tail with barcode
(d) 0 : product without barcode 1 : product with barcode
(e) 0 : manual input total Discount 1 : fix total Discount
(a) (b) (c) (d) (e) (f) (f) 0 : manual input total Tax 1 : fix total Tax
(c) Output Bar Code EAN13 (d) Output Bar Code EAN13
First 6 Code: Amount of Transaction First 6 Code: Net or Quantity of Single Transaction
Next 6 Code: Serial Number of Receipt Next 6 Code: Amount of Single Transaction
No.13 Code: Check Code No.13 Code: Check Code
For example: Fix discount 10.00% and Tax 5.00% when checking out at every time.
(a) (b) (c) (d) (e) (f) (a) (b) (c) (d) (e) (f) (a) (b) (c) (d) (e) (f)
Print as followed: Print as followed: Print as followed:
09002013 32 ZSME100000050
(a) (b) (c) (d) (e) (f) (a) (b) (c) (d) (e) (f) (a) (b) (c) (d) (e) (f)
Print as followed: Print as followed: Print as followed:
If you pressed key and input price, press key to print data including Cash & Change
which is shown as below:
09002013 33 ZSME100000050
3-10 RS232 report transmission

Use RS232 to send data to PC and save as txt file. Then use EXCEL to open it to edit.
Make sure F1 RS232 baud rate and PC baud rate n,8,1 are the same.
Press number key or , then press to confirm
0: Send PLU data
1: Send all-day accumulated data
For example:
Baud rate: 9600 N,8,1
Open the terminating machine on PC to connect.
Steps:
Start > All programs > Acceccories > Communications > Hyper Termina
09002013 34 ZSME100000050
09002013 35 ZSME100000050
Store the file *.txt
09002013 36 ZSME100000050
09002013 37 ZSME100000050
Open EXCEL and open old file (*.txt) to set comma separated point.
09002013 38 ZSME100000050
09002013 39 ZSME100000050
CHAPTER 4 PC SOFTWARE
4-1 Head and Tail Edit
Head format
H,______,_,__,__ ________________________________
(a) (b) (c) (d) (e)

Tail format
H,______,_,__,__ ________________________________
(a) (b) (c) (d) (e)
H: head
T: tail
(a) => Line 000001~000008, use ASCII(HEX) to show 30 30 30 30 30 30 30 31~30 30 30 30 30 30 30 38
(b) => Font of ASCII(HEX) code 00 : standard 10: width*2 01:height*2 11:width*2 height*2
(c) => Length of (e) , range from 00 ~ 32 use ASCII(HEX) to show 30 30 ~ 33 32
(d) => Reserve 2byte function
(e) => Edit the content in ASCII(HEX) (Refer to Appendix 4 ASCII CODE TABLE)
For example:
The first line of head is 6 bytes standard font EXCELL and line feed.
Address 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Byte H , 0 0 0 0 0 1 , , 0 6 ,
ASCII(PC-858) 48 2C 30 30 30 30 30 30 2C 00 2C 30 36 2C 00 00
(HEX)
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
E X C E L L
45 58 43 45 4C 4C 0D 0A 00 00 00 00 00 00 00 00
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Before transmission, make sure baud rate of RS232 port is the same as the scale (9600 is
recommended).
The PC send 48 bytes one time. Once the scale gets data, it return 4 byte: O K X X (X X
means the line. In this case, X X means Address 67 (line 1)) to the PC which means the
next transmission is available.
09002013 40 ZSME100000050
4-2 PLU Transformat Edit

P, _ _ _ _ , _ , _ , _ _ _ _ _ _ , _ _ _ _ _ _ , _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ , _ _ _ _ , _ _ _ _ , _ _ _ _ _ _ _
(a) (b)(c) (d) (e) (f) (g) (h) (i) (j)
(a) => PLU address 0001~0035, ASCII(HEX) code: 30 30 30 31 ~ 30 30 33 35

(b) => 0 or 1 ASCII(HEX) code 30: weight pricing
31: quantity pricing
(c) => 0 or 1 ASCII(HEX) code 30: kg weight pricing
31: 100g weight pricing
(d) => 6 bytes Unit price (000000 ~ 099999), ASCII(HEX) code: 30 30 30 30 30 30 ~ 30 39 39 39 39 39
(e) => 6 bytes CODE (P/N) (000000 ~ 999999), ASCII(HEX) code: 30 30 30 30 30 30 ~ 39 39 39 39 39 39
(f) => 16 bytes Name , any letters are available
(g) => 4 bytes Discount (0000 ~ 9999), ASCII(HEX) code: 30 30 30 30 ~ 39 39 39 39
(h) => 4 bytes Tax (0000 ~ 9999), ASCII (HEX) code: 30 30 30 30 ~ 39 39 39 39
(i) => 6 bytes pre-tare (000000 ~ full capacity /s ) , ASCII (HEX) code: 30 30 30 30 30 30 ~ full capacity
/section
(j) => 1 byte, decimals of unit price
For example:
The following data is saved in PLU 12.
Weight pricing each one 10 yuan
CODE: 001234
Name: Apple
Discount: 10.00%
Tax: 5.00%
Pre-tare: 1.000kg
Address 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Byte P , 0 0 1 2 , 1 , 0 , 0 0 0 0 1
ASCII(PC-858) 50 2C 30 30 31 32 2C 31 2C 30 2C 30 30 30 30 31
(HEX)
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
0 , 0 0 1 2 3 4 , A p p l e
30 2C 30 30 31 32 33 34 2C 41 70 70 6C 65 20 20
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
, 1 0 0 0 , 0
20 20 20 20 20 20 20 20 20 2C 31 30 30 30 2C 30
09002013 41 ZSME100000050
48 49 50 51 52 53 54 55 56 57
5 0 0 , 0 0 1 0 0 0
35 30 30 2C 30 30 31 30 30 30
Before transmission, make sure baud rate of RS232 port is the same as the scale (9600 is
recommended).
The PC send 59 bytes one time. Once the scale gets data, it return 4 byte: O K X X (X X
means the line. In this case, X X means Address 45 (line 12)) to the PC which means the
next transmission is available.
09002013 42 ZSME100000050
4-3 Data Transmission

Windows XP According to the COM on PC
RS232.
Transmitting mode: 9600,n,8,1
Start > All programs > Accessories > Command Prompt
C:>Documents and Setting>Ken> mode com6:9600,n,8,1
Use EDIT to edit needed file (For easier operation, you can download a free software MadEdit
from the internet.)
C:>Documents and Setting>Ken> edit
Store the file PLU0035.txt

Transmission has been done.
C:> Documents and Setting>Ken>copy PLU0035.txt com6

copied (1) File
If the transmission failed, the buzzer would beep 2 times. You should check whether the file was
wrong.
If the buzzer doesnt beep, the file has been transmitted.
09002013 43 ZSME100000050
Operation Method of Madedit

(1)Download Madedit-0.2.9.1.rar from the Internet
(2)Uncompress the file to Disk C
(3)Create a new folder PrintForm in C:\MadEdit-0.2.9.1 (so as to store the file *.txt in it)
(4)Double-click MadEdit.exe to open it

Click 01 HEX as followed to unfold contrast of ASCII (HEX) and txt file. You can edit it
randomly.
09002013 44 ZSME100000050
(5) If there are error codes, please change the display mode as followed.
=> select [UTF-8]Unicode 8 bit(UTF-8)
(6) After confirmation, store the file into folder PrintForm.
09002013 45 ZSME100000050
( POWER DESCRIPTION
Power Selection
1. 6V 4 Ah rechargeable battery
2. INPUT:100~240VAC 1.2A
OUTPUT:+12VDC 1.5A
Recharge Voltage
SWITCHING POWER
INPUT:100~240VAC 1.2A
OUTPUT:+12VDC 1.5A
Power Consumption
Printer is free
No backlight 60 mA longer than 65 hours
backlight 70 mA longer than 55 hours
Printer is working
Longer than 1 hour
Low Battery Warning
Please charge the battery while the display is shown ( )symbol.
If you dont charge in time, the power will be automatically cut off to protect the battery life
after using 2030 minutes. The scale must be fully charged before operating again.
When the low battery warning symbol shows up, please recharge the scale immediately for
fear of weight instability or data missing.
09002013 46 ZSME100000050
( Specification of Cashbox RJ11
RJ11 Appearance
RJ11 is commonly used to set up telephone line, 4PIN or 6PIN.
Adapter position under the platter
Pin Assignment
09002013 47 ZSME100000050
APPENDIX 1: 7 Segment Display Characters

Digit 7 segment letter Alphabet 7 segment letter Alphabet 7 segment letter
0 A N
1 B O
2 C P
3 D Q
4 E R
5 F S
6 G T
7 H U
8 I V
9 J W
K X
L Y
M Z
09002013 48 ZSME100000050
APPENDIX 2: ASCII CODE TABLE WPC-1252
09002013 49 ZSME100000050
APPENDIX 3: Iran System encoding standard
09002013 50 ZSME100000050

User Manual: Excell Precision Co., LTD

Uploaded by

Copyright:

Available Formats

User Manual: Excell Precision Co., LTD

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

User Manual: Excell Precision Co., LTD

Uploaded by

Copyright:

Available Formats

EXCELL PRECISION CO., LTD.

Excell Precision Limited 2013. All rights reserved Worldwide.

Thank you for purchasing EXCELL Scale, to help use the

product properly, operate smoothly, and extend its life

cycle, please read this manual carefully.

INSTRUCTIONS FOR USE

PREPARING TO USE THE SCALE

Brown cable(or black cable)

Red cable connected with

Capacity Division Resolution

1-3 Error Messages

The weight of the object is over the maximum capacity + 9 divisions.

Zero value is higher than 10% FS.

Zero value is lower than 10% FS.

Unstable condition when the scale counts back to zero.

(If appears, please restart the scale.)

Zero range is too high(350,000) when correcting.

Zero range is too low(80,000) when correcting.

1-4 Keypad Description

~ Number Key: To set the unit price or parameters

(1) Double zero Key: To input units with two zero

Quantity Key: To input quantities of non-weighing products

Accumulation key of non-weighing products

Accumulation key of weighing products

Check accumulation data

(1) Clear memory of one trade

+ Re-print the receipt

Change Key: Before settle an account (press ), press to calculate the

change and displaying on LCD

Function Setting Key: Press , then press to enter setting.

Method: After inputting FREE PRICE, press key before key to

Method: After inputting FREE PRICE, press key before key to

2. Input tax rate and press key.

3. Press key then input quantity.

4. Press key to store in the memory.

Weight pricing: 1. Input unit price and press key.

2. Input tax rate and press key.

3. Put weighing goods on the platter.

4. Press key to store in the memory.

Before accumulation, input total tax rate

Zero return key:

Clear Key: clear unit price or parameters

PLU Unit Price Setting Key

Switch to user A, or switch to Vendor 1

Switch to user B, or switch to Vendor 2

Paper-feed key of Printer :

Switching to capital letters or Multiple key.

1-5 Fixing Paper of Printer

(1) Open printer upper lid:

(3) Pull out the paper end

(4) Bow and hold down the paper end

(5) Close the printer upper lid

CHAPTER 2 FUNCTION INSTRUCTION

2-2 Backlight Function (Optional)

Press key, the unit weight displays followed by pressing

key, backlight mode is Auto-backlight.

Press key, the unit weight displays followed by pressing

key, backlight is off.

< Method 2>

The backlight status will be memorized.

All-day accumulating data couldnt be cleared by F7 or F9 operation, you should

Use number key ~ to input.

Use number key ~ to input.