Nothing Special   »   [go: up one dir, main page]

Dell D1920 Monitor: User Manual

Download as pdf or txt
Download as pdf or txt
You are on page 1of 9

Dell D1920 monitor

TM

User Manual

English Pycc
Deutsch Svenska
Franais Suomi
Italiano Dansk
Espaol Polski Norsk
Portuqus Nederlands

Model: D1920f
PRECAUTIONS
Information for users applicable in United States of America 1
Installation 1
Power connection 1
Maintenance 1
Transporting the monitor 1

GETTING STARTED
Package contents 2
Monitor installation 2
Identifying parts and controls 3
Working with OSD Group 3
Customizing Your Monitor 3
Hotkeys 4
Function Keys Operation 4
OSD Icon List 5

Troubleshooting 6

Technical Features and Specifications 7


PRECAUTIONS

Information for users applicable in United States of America Maintenance


LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE 1.Clean the cabinet and controls with a soft cloth lightly moistened with a mild detergent
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR solution. Do not use any abrasive materials or solvents such as alcohol or benzene.
FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC 2.Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as
INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC pens or screwdrivers, as the screen may scratch.
DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG. 3.Do not insert objects or spill liquids into the ventilation ports on the monitors rear, as
fire, electric shock, and / or unit failure may result.

Installation
Transporting the monitor
1. Do not cover or block the ventilation ports on the rear of the monitor.
2. Do not install the monitor close to heat sources such as radiators or air ducts, or in a 1.When carrying the display for repair or service, disassemble the monitor and pack in its
location exposed to direct sunlight, excessive dust, mechanical vibration,or shock. original packing. To disassemble the neck and base, press the "release button" located
3.The apparatus shall only be used between 5 tilted forward and 15 tilted backward as on the back of the neck and detach the neck/base, then remove the base from the neck
by pressing the release tabs located under the base plate and pull the neck off the
normal operation position. If the tilt angle exceeds 15, it shall be used for wall
base, finally use the original carton and packing materials to wrap the display and its
mounting or packaging only. accessories.

Power connection
1.Use the correct power cord for your local voltage.
2.Use an accessible outlet close to the monitor.
3.Do not allow anything to rest on the power cable.
4.Only use the power adapter attached to the monitor.
5.Disconnect the power cable from the power supply if:
5.1 You will not use the monitor for an extended period.
5.2 The cable is damaged or frayed.
5.3 The monitor has been dropped or the cabinet damaged.
5.4 A distinct change in performance indicates a need for servicing.

-1-
GETTING STARTED
Package contents Monitor installation
Before beginning, ensure that the carton contains the following items: 1.Setting up the monitor
1.1 Take out the monitor, stand and monitor base from the package.
1.2 Place the monitor base on the desk and then slide the neck
1. LCD Monitor into the slots of base. (Make sure the direction of the neck is
correct.)
1.3 Hold the monitor and then slide the monitor into the neck. (Make
2. Monitor Base and Neck sure the direction of the neck is correct)
(the shape of base may vary according to the monitor model) 2.Connecting signal cable
2.1 Switch off your computer
2.2 Connect the signal cable to the D-SUB port at the rear of
3. Power Cord (plug may vary according to the electrical standards
for your area)
the monitor and tighten the connector screws
2.3 Connect the other end of signal cable to the computer's
VGA port and tighten the connector screws.
2.4 Note: Ensure the display setting does not exceed
4. Analog Signal Cable
1366 X 768 @ 60Hz.
3.Connecting power
Connect one end of the power cable to the monitor and
5. CD-ROM (contains user manual) the other end to a power outlet.
4.Switching on
Switch on your computer.
6 .Quick Installation Guide
POWER D-SUB

You should now be able to see the picture. If not, see the
troubleshooting section of this guide.

-2-
Identifying parts and controls Customizing Your Monitor
1. The color of the LED light on the power button determines the monitor state. The The On Screen Display (OSD) system provides a full range of customizable tools to
LED light is bright blue when the monitor is fully operational, and it is orange when optimize your display.
inactive.
2.The function keys are used to adjust the settings of your monitor. For more information Although you could perform comprehensive customization, we
on function keys, see "Function Keys Operation" on page 4. strongly recommend that you use the AUTO ADJUSTMENT
Important: function.
It can utilize the default values to thoroughly optimize the
performance of the display. Activate the OSD munu.
Working with OSD Group Select the first button on the left to activate the AUTO
You can identify the function of a button through the corresponding icon displayed on the ADJUSTMENT function.
pop-up window of OSD. The following images show that the buttons on the monitor can
be used for multiple tasks. In addition, we have also prepared other relatively simple methods to
Important: change the display modes. There are 4 modes, which include:
GENERAL, MOVIE, PICTURE, GAME.

First Level

1. Press button to start.


2. Press any of the rest 4 buttons to activate the OSD menu.
3. Press the corresponding function icon button on the pop-up window of the OSD.

-3-
Hotkeys
1.Auto Adjustment Auto-Adjustment
General
Brightness
English
When the OSD functions are displayed, press the first button on the left , and then Power Theme Mode
Movie Deutsch
Contrast Franais
Picture
you can automatically optimize the image performance. Menu
Italiano
Game
2.Theme Mode Menu Main Menu
OSD Menu
Language
17 Lauguages control menu Espaol

When the OSD functions are displayed, press the second button on the left to shift

<
< Color
the mode. You may press and to make adjustments between 4 modes. Temperature
User/Red Norsk
User/Green
E
Press , and then you can leave automatically. User/Blue Svenska
Cool Suomi
3.Main Menu Warm
Dansk
Polski
When the OSD functions are displayed, press the second button on the right to System White Balance Nederlands
Horizontal Position Portuqus
enter the main menu. And then press or to select the option. Vertical Position
E
Press to enter into the option. Press or to leave. Phase
<

Recall Clock
DDC/CI
Function Keys Operation DCR
Demo
Information
The following illustration shows the options that can be accessed through the OSD main
menu.
To navigate through the OSD menu:
1. Activate the OSD main menu: Under the energized condition, press any function key to
execute the function.
2. Confirm the selection: Press the button.
<
<
3. Browse the previous or next option: Press and .
4. Adjust the option value: Press and to adjust the value.
5. Return to the higher level menu. Press to return to the higher level.
<

6. Exit: Press E to exit OSD menu; Or if you do not press any button, it will
automatically disappear after 30 seconds.

-4-
OSD Icon List

AUTO
* Optimize the picture performance automatically. PHASE * Adjust the monitor internal signal phase
ADJUSTMENT
* Activate the built-in color engine to enhance the graphic
THEME MODE effects according to the different situations of the display.
CLOCK * Adjust the monitor internal sampling clock rate
contents

BRIGHTNESS * Adjust the luminance level of the screen.


DDC/CI * Select turn on or turn off DDC/CI function

CONTRAST * Adjust the contrast level of the screen.

* 2 seconds after activation of this function, some of the


DEMO menus will stimulate feature-grading effects 2 times over.
OSD MENU * Select your own preference of language of OSD menu.
LANGUAGE
* Select the setting of screen color-Cool, Warm or User. * Show the frequency, resolution, input interface and other
COLOR INFORMATION operating details about this display.
* Cool: Select the setting of screen color to be bluish white.
TEMPERATURE
* Warm: Select the setting of screen color to be reddish white.

* Adjust the mechanical specifications regarding the display. RECALL * Reset monitor parameters back to factory preset values.
SYSTEM
SYSTEM (White Balance, Clock, Phase, DDC/CI, DCR, DEMO,
Horizontal Position, Vertical Position, Information)

WHITE BALANCE * Adjust the balance of the input signal.

HORIZONTAL
* Shift the screen left or right
POSITION

VERTICAL * Shift the screen up or down


POSITION

DYNAMIC CONTRAST * Display high dynamic contrast ratio, and present more
RATIO colorful screen.

-5-
Troubleshooting

Symptom Check Items


1.No picture 1. Check if the monitor is turned on (press the button again).
2.LED indicator is not lit. 2. Check if the power cord is properly connected to the monitor and power outlet.
3 .Check if there is electricity coming from the power outlet (use another device to check for power).

1.No picture 1 Check if your computer is turned on.


2.LED indicator is orange 2 Ensure the computer is not in power saving mode (move the mouse or press a key on the keyboard
to wake up the computer).
3 Check if the video signal cable is properly connected to the monitor and computer.

1.Picture shows NO SIGNAL INPUT 1 Check if your computer is turned on.


2 Check if the video signal cable is properly connected to the monitor and computer.

1.Picture shows INPUT SIGNAL OUT OF RANGE 1. Ensure that the resolution and/or refresh rate is set correctly.

Important Make sure your display setup is under VESA 1366 X 768 at 60Hz

-6-
Technical Features and Specifications

Item Description
Display Size 409.8(H) x 230.4(V) mm
Panel
Pixel Pitch 0.300(H) x 0.300(V) mm
Connector Analog D-sub
Tilt Tilt Angle -5 ~ 15
Dimensions
(W x H x D) Net About 440.4(W) x 353.6(H) x 200.0 (D) mm

Weight Net About 3.3 kg

Power AC AC 100~240V, 50Hz/60Hz, 1.2A


Consumption Active:<25W / Standby:<1W
Interface Horizontal 30 ~ 83KHz
Frequency Vertical 50 ~ 75Hz
Operating Temperature 0C to 40C
Condition Humidity 10% to 90% (No Condensation)
Altitude 0 ~ 10,000 ft.
Temperature -20C to 60C
Storage
Condition Humidity 10% to 90% (No Condensation)
Altitude 0 ~ 40,000 ft.

-7-

You might also like