parts and tools

1
 RAMMER
HITS FIRST
The worlds best-known and most-respected brand of
hydraulic hammers offers a comprehensive range of powerful,
productive and durable attachments that are suitable for
carriers in the 0.6 to 100 tons operating weight class.

Divided into four hydraulic hammer families, the Rammer

hydraulic hammer range is unsurpassed in its innovation
and reliability and offers class-leading power-to-weight
characteristics that mark them as the best in their class.

Rammers product selection is supported by a dedicated

global dealer network with ready access to Genuine Rammer
parts and a wealth of operational knowledge and experience
to ensure that your Rammer product continues to contribute
to your companys profitability for its entire working life.

CONTENT
Genuine Rammer Tools 4
Right Tool, Right Job 5
Technical specifications 6
Proper tool maintenance 19
Tool analyses 20
Vidat 21
Grease is the word 22
Auxiliary product 24
Demolition tools 26

2 3
 GENUINE RAMMER TOOLS RIGHT TOOL, RIGHT JOB

Standard Hard rock chisel

chisel tool - Hard and abrasive rock with fractures
- For nonabrasive but tough rock - For application where drilling and
or concrete blasting cannot be used
- For material which has low or - Materials with low penetration rate
medium penetration rate

Limestone and Blunt tool

concrete chisel
- Hard rock with low or medium
- Very soft and easily breaking, abrasive ontent
nonabrasive rock or concrete
- Boulder breaking or concrete demolition
- For rock which has high
- Application where tool wear rate is low
penetration rate

Moil point tool Super blunt tool

- Where chisels have excessive - Hard and abrasive rock
retaining pin groove wear - Only for boulder breaking
- Soft and nonabrasive rock - 1.5-3 times more wear life than
The key to productivity
- General demolition of concrete standard blunt in very abrasive applications
Choosing the right tool for the job will have a major re-sharpening of the contact point may be required. - In non-abrasive applications life
impact upon the power and productivity of your hammer. Penetrative applications such as the breaking of limestone maybe shorter than standard blunt
First, it is vital to determine if the job is an impact or and non-reinforced concrete require the Rammer Limestone
penetrative breaking application. Rammer has introduced Chisel. This is designed specifically for faster penetration
several tool models designed with job specific work while reducing the idle blow effects found in soft material Pyramid point tool Compact range tool
requirements, providing excellent value, long life and applications. - Soft, nonabrasive and tough rock - Breaking concrete
maximum performance. and especially concrete - Hard or frozen ground
Correctly matching the right tool to the job application is
- Materials requiring high - Road surface or asphalt
In impact applications, it is important to identify the critical to achieving the highest level of production with
penetration rate
level of abrasive characteristics in the material. Rammer lowest possible operating costs.
- Where chisels have excessive
Super Blunt tools provide excellent wear characteristic retaining pin groove wear
Always use original Rammer tools.
and long life in applications involving highly abrasive
oversize materials, for example high silica content
Training
boulders.
We offer product training on our products as well as
Compacting tool Asphalt cutting tool
Primary breaking of hard rock will require the Rammer operator training to ensure that you are achieving the
Hard Rock Chisel. This tool is geometrically designed for maximum return on your capital investment. For more - Ground compacting - Frozen or compact ground

the highest production possible and a long service life. In information on the training courses, please contact your - Asphalt
the event the rock is very hard and homogenous, local dealer.

4 5
 Technical specifications COMPACT RANGE
108
in6/in8 (br108)
211
in9/in11 (br211)
315
in12/in15 (br315)
522
in22 (br522)

Diameter mm (in) 104 (4.09) 119 (4.69) 131 (5.16) 150 (5.91)
Pyramid
Part number No. N63S1 N93S1 N123S1 N223S1
Total length mm (in) 420 (16.54) 470 (18.50) 520 (20.47) 591 (23.27)
Working length mm (in) 270 (10.63) 300 (11.81) 330 (12.99) 380 (14.96)
Weight kg (lb) 9 (20) 13.4 (30) 18.1 (40) 27 (60)

small RANGE 111 222 333 555 777 999

(BR111) (BR222) (BR333) (BR555) (BR777) (BR999)
Diameter mm (in) 36 (1.42) 42 (1.65) 50 (1.97) 72 (2.83) 80 (3.15) 90 (3.54)
Chisel
Part number No. BH401 BH601 BH801 BJ631 BJ701 BJ801
Total length mm (in) 360 (14.17) 405 (15.94) 490 (19.29) 650 (25.59) 740 (29.13) 830 (32.68)
Working length mm (in) 220 (8.66) 230 (9.05) 260 (10.24) 350 (13.78) 400 (15.75) 450 (17.72)
Weight kg (lb) 2.7 (10) 4.1 (10) 7.1 (20) 19.2 (40) 27.1 (60) 38.5 (80)
Moil point
Part number No. BH403 BH603 BH803 BJ633 BJ703 BJ803
Total length mm (in) 360 (14.17) 405 (15.94) 490 (19.29) 650 (25.59) 740 (29.13) 830 (32.68)
Working length mm (in) 220 (8.66) 230 (9.05) 260 (10.24) 350 (13.78) 400 (15.75) 450 (17.72)
Weight kg (lb) 2.6 (10) 3.9 (10) 6.8 (10) 19.2 (40) 27 (60) 38.4 (80)
Spade, parallel to boom
Part number No. BH405 BH605 BH805 BJ635 BJ705 BJ805
Total Width mm (in) 100 (3.94) 100 (3.94) 115 (4.53) 150 (5.91) 180 (7.09) 210 (8.27)
Total length mm (in) 380 (14.96) 420 (16.54) 490 (19.29) 650 (25.59) 740 (29.13) 840 (33.07)
Working length mm (in) 230 (9.05) 250 (9.84) 260 (10.24) 350 (13.78) 400 (15.75) 460 (18.11)
Weight kg (lb) 3.2 (10) 4.1 (10) 6.8 (10) 17.9 (40) 25 (60) 37.7 (80)
Spade, transverse to boom
Part number No. BH406 BH606 BH806 BJ636 BJ706 BJ806
Total Width mm (in) 100 (3.94) 100 (3.94) 115 (4.53) 150 (5.91) 180 (7.09) 210 (8.27)
Total length mm (in) 380 (14.96) 420 (16.54) 490 (19.29) 650 (25.59) 740 (29.13) 840 (33.07)
Working length mm (in) 230 (9.05) 250 (9.84) 260 (10.24) 350 (13.78) 400 (15.75) 460 (18.11)
Weight kg (lb) 3.2 (10) 4.1 (10) 6.8 (10) 17.9 (40) 25 (60) 37.7 (80)
Compacting plate
Part number No. BH807 BJ637 BJ707 BJ807
Total Width mm (in) 180 (7.09) 330 (12.99) 330 (12.99) 330 (12.99)
Total length mm (in) 437 (17.20) 510 (20.08) 700 (27.56) 800 (31.50)
Working length mm (in) 210 (8.27) 210 (8.27) 360 (14.17) 420 (16.54)
Weight kg (lb) 11.7 (30) 51.4 (110) 68 (150) 76.6 (170)

6 7
 small RANGE 255 355 455 small RANGE
piccolo S 21
(BR321)
S 22
(BR422)
S 23 N
(BR623)
S 25 N
(BR825)
S26 N
S26
S 27
(BR927)
S 29
(BR1129)

Diameter mm (in) 40 (1.57) 48 (1.89) 56 (2.20) Diameter mm (in) 40 (1.57) 45 (1.77) 50 (1.97) 63 (2.48) 70 (2.76) 90 (3.54) 83.7 (3.30) 95 (3.74)
Chisel Chisel
Part number No. BG351 BG451 BG551 Part number No. 181 211 2201 231 251 261 271 291
Total length mm (in) 380 (14.96) 450 (17.72) 520 (20.47) Total length mm (in) 400 (15.75) 480 (18.90) 530 (20.87) 680 (26.77) 730 (28.74) 850 (33.46) 840 (33.07) 900 (35.43)
Working length mm (in) 221 (8.70) 233 (9.17) 299 (11.77) Working length mm (in) 253 (9.96) 249 (9.80) 262 (10.31) 364 (14.33) 390 (15.35) 409 (16.10) 417 (16.42) 460 (18.23)
Weight kg (lb) 3.4 (10) 5.9 (10) 9.3 (20) Weight kg (lb) 3.8 (10) 5.4 (10) 7.6 (20) 15 (30) 20 (40) 36 (80) 34 (70) 46 (100)
Moil point Long chisel
Part number No. BG353 BG453 BG553 Part number No. 212 2202 232 252 262 272 292
Total length mm (in) 380 (14.96) 450 (17.72) 520 (20.47) Total length mm (in) 560 (22.05) 620 (24.41) 780 (30.71) 830 (32.68) 1000 (39.) 950 (37.40) 1050 (41.)
Working length mm (in) 221 (8.70) 233 (9.17) 299 (11.77) Working length mm (in) 329 (12.95) 352 (13.86) 464 (18.27) 490 (19.29) 559 (22.00) 527 (20.75) 613 (24.13)
Weight kg (lb) 3.5 (10) 5.8 (10) 9.1 (20) Weight kg (lb) 6.4 (10) 8.4 (20) 18 (40) 23 (50) 45 (100) 37 (80) 55 (120)
Spade, parallel to boom Moil point
Part number No. BG355 BG455 BG555 Part number No. 183 213 2203 233 253 263 273 293
Total Width mm (in) 100 (3.94) 115 (4.53) 115 (4.53) Total length mm (in) 400 (15.75) 480 (18.90) 530 (20.87) 680 (26.77) 730 (28.74) 850 (33.46) 840 (33.07) 900 (35.43)
Total length mm (in) 380 (14.96) 450 (17.72) 560 (22.05) Working length mm (in) 253 (9.96) 249 (9.80) 262 (10.31) 364 (14.33) 390 (15.35) 409 (16.10) 417 (16.42) 460 (18.23)
Working length mm (in) 221 (8.70) 233 (9.17) 349 (13.74) Weight kg (lb) 3.6 (10) 5.4 (10) 7 (20) 15 (30) 20 (40) 36 (80) 33 (70) 44 (100)
Weight kg (lb) 3.5 (10) 5.9 (10) 9.7 (20) Long moil point
Spade, transverse to boom Part number No. 218 2208 238 258 268 278 298
Part number No. BG356 BG456 BG556 Total length mm (in) 560 (22.05) 620 (24.41) 780 (30.71) 830 (32.68) 1000 (39.) 950 (37.40) 1050 (41.)
Total Width mm (in) 100 (3.94) 115 (4.53) 115 (4.53) Working length mm (in) 329 (12.95) 352 (13.86) 464 (18.27) 490 (19.29) 559 (22.00) 527 (20.75) 613 (24.13)
Total length mm (in) 380 (14.96) 450 (17.72) 560 (22.05) Weight kg (lb) 6.4 (10) 8.4 (20) 18 (40) 23 (50) 48 (105) 37 (80) 53 (120)
Working length mm (in) 221 (8.70) 233 (9.17) 349 (13.74) Blunt
Weight kg (lb) 3.5 (10) 5.9 (10) 9.7 (20) Part number No. 294
Compacting plate Total length mm (in) 800 (31.50)
Part number No. BG357 BG457 BG557 Working length mm (in) 363 (14.29)
Total Width mm (in) 160 (6.30) 160 (6.30) 250 (9.84) Weight kg (lb) 43 (90)
Total length mm (in) 387 (15.24) 407 (16.02) 430 (16.93) Spade, parallel to boom
Working length mm (in) 228 (8.98) 186 (7.32) 219 (8.62) Part number No. 185 215 2205 235 255 265 275 295
Weight kg (lb) 8.5 (20) 9.9 (20) 23 (50) Total Width mm (in) 100 (3.94) 100 (3.94) 115 (4.53) 130 (5.12) 150 (5.91) 280 (11.02) 200 (7.87) 200 (7.87)
Total length mm (in) 380 (14.96) 450 (17.72) 490 (19.29) 570 (22.44) 720 (28.35) 850 (33.46) 880 (34.65) 830 (32.67)
Working length mm (in) 233 (9.17) 219 (8.62) 222 (8.74) 254 (10.) 380 (14.96) 409 (16.10) 457 (17.99) 393 (15.47)
Weight kg (lb) 3.5 (10) 5 (10) 6.7 (10) 12.8 (30) 18.8 (40) 55 (120) 34.3 (80) 39 (90)
Spade, transverse to boom
Part number No. 186 216 2206 236 256 266 276 296
Total Width mm (in) 100 (3.94) 100 (3.94) 115 (4.53) 130 (5.12) 150 (5.91) 280 (11.02) 200 (7.87) 200 (7.87)
Total length mm (in) 380 (14.96) 450 (17.72) 490 (19.29) 570 (22.44) 720 (28.35) 850 (33.46) 880 (34.65) 830 (32.67)
Working length mm (in) 233 (9.17) 219 (8.62) 222 (8.74) 254 (10.) 380 (14.96) 409 (16.10) 457 (17.99) 393 (15.47)
Weight kg (lb) 3.5 (10) 5 (10) 6.7 (10) 12.8 (30) 18.8 (40) 55 (120) 34.3 (80) 39 (90)
Compacting
Part number No. 217 2207 237 257 267 277 297
Total Width mm (in) 250 (9.84) 250 (9.84) 250 (9.84) 330 (12.99) 330 (12.99) 330 (12.99) 350 (13.78)
Total length mm (in) 400 (15.75) 460 (18.11) 570 (22.44) 610 (24.02) 860 (33.86) 800 (31.50) 800 (31.50)
Working length mm (in) 169 (6.65) 192 (7.55) 254 (10.) 270 (10.63) 419 (16.50) 377 (14.84) 363 (14.29)
Weight kg (lb) 21 (50) 22.7 (50) 30 (70) 54 (120) 82 (180) 74 (160) 95 (210)

8 8 9
 medium
range
1533 2155
(br1533) br2155

Diameter mm (in) 105 (4.13) 118 (4.65)

Chisel
Part number No. 331 551
Total length mm (in) 1000 (39.37) 1050 (41.34)
Working length mm (in) 565 (22.24) 560 (22.04)
Weight kg (lb) 62.4 (140) 82.7 (180)
Long chisel
Part number No. 552
Total length mm (in) 1150 (45.28)
Working length mm (in) 660 (25.98)
Weight kg (lb) 90.5 (200)
Moil point
Part number No. 333 553
Total length mm (in) 1000 (39.37) 1050 (41.34)
Working length mm (in) 565 (22.24) 560 (22.04)
Weight kg (lb) 61.8 (140) 82.7 (180)
Long moil point
Part number No. 558
Total length mm (in) 1150 (45.28)
Working length mm (in) 660 (25.98)
Weight kg (lb) 90.5 (200)
Blunt
Part number No. 334 554
Total length mm (in) 800 (31.50) 850 (33.46)
Working length mm (in) 365 (14.37) 360 (14.17)
Weight kg (lb) 53.2 (120) 71.1 (160)
Long Blunt
Part number No. 554CI
Total length mm (in) 1050 (41.34)
Working length mm (in) 560 (22.04)
Weight kg (lb) 88.3 (190)
Limestone Chisel
Part number No. 551F3
Total length mm (in) 1000 (39.37)
Working length mm (in) 510 (20.08)
Weight kg (lb) 81 (180)
Pyramid
Part number No. 553K3
Total length mm (in) 1050 (41.34)
Working length mm (in) 560 (22.04)
Weight kg (lb) 82.7 (180)
Spade, parallel to boom
Part number No. 335
Total Width mm (in) 230 (9.05)
Total length mm (in) 1000 (39.37)
Working length mm (in) 565 (22.24)
Weight kg (lb) 62.5 (140)
Spade, transverse to boom
Part number No. 336
Total Width mm (in) 230 (9.05)
Total length mm (in) 1000 (39.37)
Working length mm (in) 565 (22.24)
Weight kg (lb) 62.5 (140)

10 11
 medium S54 S56 E 63 E 64 E 65/E 66 Tunnel E 66 N E 68 medium S54 S56 E 63 E 64 E 65/E 66 Tunnel E 66 N E 68
range (BR2063) (BR2064) (BR2265) (BR2266) (BR2568) range (BR2063) (BR2064) (BR2265) (BR2266) (BR2568)

Diameter mm (in) 115 (4.53) 130 (5.12) 115 (4.53) 106 (4.17) 125 (4.92) 115 (4.53) 130 (5.12) Diameter mm 115 (4.53) 130 (5.12) 115 (4.53) 106 (4.17) 125 (4.92) 115 (4.53) 130 (5.12)
Chisel Long Blunt
Part number No. 541 561 631 641 651 661 681 Part number No. 634CI 644CI 654CI 664CI 684CI
Total length mm (in) 1050 (41.34) 1100 (43.31) 1000 (39.37) 1050 (41.34) 1050 (41.34) 1050 (41.34) 1100 (43.31) Total length mm 1000 (39.37) 1050 (41.34) 1050 (41.34) 1050 (41.34) 1100 (43.31)
Working length mm (in) 655 (25.79) 675 (26.57) 560 (22.05) 610 (24.02) 575 (22.64) 575 (22.64) 620 (24.41) Working length mm 560 (22.05) 610 (24.02) 575 (22.64) 575 (22.64) 620 (24.41)
Weight kg (lb) 79 (1700) 103 (230) 65 (140) 67 (150) 85 (190) 77 (170) 104 (230) Weight kg 72 (160) 78 (170) 89 (200) 82 (180) 111 (240)
Long chisel Limestone Chisel
Part number No. 542 562 642 652 662 682 Part number No. 631F3 651F3 681F1
Total length mm (in) 1150 (45.27) 1250 (49.21) 1150 (45.27) 1150 (45.27) 1150 (45.27) 1250 (49.21) Total length mm 1000 (39.37) 1050 (41.34) 1050 (41.34)
Working length mm (in) 755 (29.72) 825 (32.48) 710 (27.95) 675 (26.57) 675 (26.57) 770 (30.31) Working length mm 525 (20.67) 575 (22.64) 570 (22.44)
Weight kg (lb) 86 (190) 115 (250) 74 (160) 93 (210) 85 (190) 120 (260) Weight kg 65 (140) 85 (190) 107 (240)
Moil point Hard Rock Chisel
Part number No. 543 563 633 643 653 663 683 Part number No. 631A2 681A2
Total length mm (in) 1050 (41.34) 1100 (43.31) 1000 (39.37) 1050 (41.34) 1050 (41.34) 1050 (41.34) 1100 (43.31) Total length mm 800 (31.50) 1100 (43.31)
Working length mm (in) 655 (25.79) 675 (26.57) 560 (22.05) 610 (24.02) 575 (22.64) 575 (22.64) 620 (24.41) Working length mm 360 (793.66) 620 (24.41)
Weight kg (lb) 78 (170) 99 (220) 67 (150) 67 (150) 84 (190) 77 (170) 103 (230) Weight kg 51 (110) 99 (220)
Long moil point Pyramid
Part number No. 548 568 648 668 668 688 Part number No. 633K3 643K3 653K3 663K3 683K3
Total length mm (in) 1150 (45.27) 1250 (49.21) 1150 (45.27) 1150 (45.27) 1150 (45.27) 1250 (49.21) Total length mm 1050 (41.34) 1050 (41.34) 1050 (41.34) 1050 (41.34) 1100 (43.31)
Working length mm (in) 755 (29.72) 825 (32.48) 710 (27.95) 675 (26.57) 675 (26.57) 770 (30.31) Working length mm 575 (22.64) 610 (24.02) 575 (22.64) 575 (22.64) 620 (24.41)
Weight kg (lb) 86 (190) 110 (240) 74 (160) 91 (210) 85 (190) 120 (260) Weight kg 66 (150) 66 (150) 84 (190) 76 (170) 104 (230)
Blunt Super blunt
Part number No. 544 564 634 644 654 664 684 Part number No. 564T2 684T2
Total length mm (in) 850 (33.46) 900 (35.43) 800 (31.50) 850 (33.46) 850 (33.46) 850 (33.46) 900 (35.43) Total length mm 900 (35.43) 900 (35.43)
Working length mm (in) 455 (17.91) 475 (18.70) 360 (793.66) 410 (16.14) 375 (14.76) 375 (14.76) 420 (16.54) Working length mm 475 (18.70) 420 (16.54)
Weight kg (lb) 69 (150) 94 (210) 58 (130) 58 (130) 74 (160) 66 (150) 90 (200) Weight kg 96 (210) 127 (280)

12 13
 medium M14 M18
MODULAR RANGE (BR2214) (BR2518)

Diameter mm (in) 125 (4.92) 140 (5.51)

Chisel
Part number No. M141 M181
Total length mm (in) 1100 (43.31) 1200 (47.24)
Working length mm (in) 565 (22.24) 615 (24.22)
Weight kg (lb) 93.4 (210) 128.6 (280)
Moil point
Part number No. M143 M183
Total length mm (in) 1100 (43.31) 1200 (47.24)
Working length mm (in) 565 (22.24) 615 (24.22)
Weight kg (lb) 92.0 (200) 124.1 (270)
Limestone chisel
Part number No. M141F3 M181F3
Total length mm (in) 1100 (43.31) 1150 (45.28)
Working length mm (in) 565 (22.24) 565 (22.24)
Weight kg (lb) 99.8 (220) 126.7 (280)
Hard rock chisel
Part number No. M181A2
Total length mm (in) 1200 (47.24)
Working length mm (in) 615 (24.22)
Weight kg (lb) 123.4 (270)
Pyramid
Part number No. M143K3 M183A2
Total length mm (in) 1100 (43.31) 1200 (47.24)
Working length mm (in) 565 (22.24) 615 (24.22)
Weight kg (lb) 99.8 (220) 124.4 (270)
Blunt
Part number No. M144 M184
Total length mm (in) 900 (35.43) 1050 (41.34)
Working length mm (in) 365 (14.37) 465 (18.31)
Weight kg (lb) 81.9 (180) 120.0 (260)
Super blunt
Part number No. M184T2
Total length mm (in) 1050 (41.34)
Working length mm (in) 465 (18.31)
Weight kg (lb) 130.5 (290)
Long blunt
Part number No. M184C1
Total length mm (in) 1200 (47.24)
Working length mm (in) 615 (24.22)
Weight kg (lb) 137 (300)

14 15
 large 2577 3288 4099 5011 7013 large G 80 G 90
4510 4511 S83 S84 S86
range br2577 br3088 (G 88) br4099 br5011 br7013 G130
range G 80 N (BR3890)
G 100 (br4510) G 110 (br4511)
Diameter mm (in) 135 (5.31) 142 (5.59) 166 (6.54) 190 (7.48) 203 (7.99) Diameter mm 140 (5.51) 160 (6.30) 170 (6.69) 175 (6.89) 140 (5.51) 160 170
Chisel Chisel
Part number No. 771 881 991 50111 131 Part number No. 801 901 101 111 831 841 861
Total length mm (in) 1120 (44.09) 1200 (47.24) 1400 (55.12) 1550 (61.02) 1550 (61.02) Total length mm 1200 (47.24) 1405 (55.31) 1450 (57.09) 145 (57.09) 1200 (47.24) 1350 (53.15) 1450 (57.09)
Working length mm (in) 636 (25.04) 610 (24.02) 705 (27.76) 754 (29.68) 780 (30.71) Working length mm 615 (24.21) 750 (29.53) 700 (27.56) 700 (27.56) 660 (25.98) 750 (29.53) 800 (31.50)
Weight kg (lb) 112 (250) 132 (290) 218 (480) 303 (670) 343 (760)
Weight kg 132 (290) 206 (450) 230 (510) 241 (530) 137 (300) 198 (440) 230 (510)
Long chisel
Moil point
Part number No. 772
Part number No. 803 903 103 113 833 843 863
Total length mm (in) 1270 (50.00)
Total length mm 1200 (47.24) 1405 (55.31) 1450 (57.09) 1450 (57.09) 1200 (47.24) 1350 (53.15) 1450 (57.09)
Working length mm (in) 786 (30.94)
Weight kg (lb) 129 (280) Working length mm 615 (24.21) 750 (29.53) 700 (27.56) 700 (27.56) 660 (25.98) 750 (29.53) 800 (31.50)
Moil point Weight kg 127 (280) 206 (450) 225 (500) 236 (520) 137 (300) 187 (410) 230 (510)
Part number No. 773 883 993 50113 133 Blunt
Total length mm (in) 1120 (44.09) 1200 (47.24) 1400 (55.12) 1550 (61.02) 1550 (61.02) Part number No. 804 904 104 114 834 844 864
Working length mm (in) 636 (25.04) 610 (24.02) 705 (27.76) 754 (29.68) 780 (30.71) Total length mm 1050 (41.34) 1255 (49.41) 1300 (51.18) 1300 (51.18) 1050 (41.34) 1200 (47.24) 1300 (51.18)
Weight kg (lb) 108 (240) 128 (280) 212 (470) 297 (650) 327 (720) Working length mm 465 (18.31) 600 (23.62) 550 (21.65) 550 (21.65) 510 600 (23.62) 650 (25.59)
Long moil point
Weight kg 123 (270) 196 (430) 225 (500) 232 (510) 122 (270) 185 (410) 230 (510)
Part number No. 778
Limestone Chisel
Total length mm (in) 1270 (50.00)
Part number 801F3 901F3 101F3 111F3 831F3 841F3
Working length mm (in) 786 (30.94)
Total length mm 1200 (47.24) 1405 (55.31) 1450 (57.09) 1450 (57.09) 1200 (47.24) 1350 (53.15)
Weight kg (lb) 125 (280)
Working length mm 615 (24.21) 750 (29.53) 700 (27.56) 700 (27.56) 660 (25.98) 750 (29.53)
Blunt
Part number No. 774 884 994 50114 134 Weight kg 136 (300) 208 (460) 240 (530) 250 (550) 134 (300) 198 (440)

Total length mm (in) 920 (36.22) 1050 (41.34) 1265 (49.80) 1400 (55.12) 1500 (59.06) Hard Rock Chisel
Working length mm (in) 436 (17.17) 460 (18.11) 570 (22.44) 604 (23.78) 730 (28.74) Part number No. 801A2 901A2 101A2 111A2 831A2 841A2
Weight kg (lb) 100 (220) 124 (270) 208 (460) 293 (650) 360 (790) Total length mm 1200 (47.24) 1405 (55.31) 1450 (57.09) 1450 (57.09) 1200 (47.24) 1350 (53.15)
Long Blunt Working length mm 615 (24.21) 750 (29.53) 700 (27.56) 700 (27.56) 660 (25.98) 750 (29.53)
Part number No. 774CI Weight kg 132 (290) 206 (450) 245 (530) 257 (570) 137 (300) 198 (440)
Total length mm (in) 1120 (44.09)
Pyramid
Working length mm (in) 636 (25.04)
Part number No. 803K3 903K3 103K3 113K3 833K3 843K3
Weight kg (lb) 121 (270)
Limestone Chisel Total length mm 1200 (47.24) 1405 (55.31) 1450 (57.09) 1450 (57.09) 1200 (47.24) 1350 (53.15)

Part number No. 771F3 881F3 991F3 131P3 Working length mm 615 (24.21) 750 (29.53) 700 (27.56) 700 (27.56) 660 (25.98) 750 (29.53)
Total length mm (in) 1120 (44.09) 1200 (47.24) 1400 (55.12) 1400 (55.12) Weight kg 132 (290) 197 (430) 215 (470) 226 (500) 137 (300) 187 (410)
Working length mm (in) 636 (25.04) 610 (24.02) 705 (27.76) 630 (24.80) Super blunt
Weight kg (lb) 115 (250) 137 (300) 223 (490) 310 (680) Part number No. 804T2 904T2 104T2 114T2 834T2 844T2
Hard Rock Chisel Total length mm 1100 (43.31) 1250 (49.21) 1350 (53.15) 1350 (53.15) 1100 (43.31) 1250 (49.21)
Part number No. 771A2 881A2 991A2 5011A2 131A2 Working length mm 515 (20.28) 600 (23.62) 600 (23.62) 600 (23.62) 560 (22.05) 560 (22.05)
Total length mm (in) 1120 (44.09) 1200 (47.24) 1400 (55.12) 1550 (61.02) 1550 (61.02) Weight kg 135 (300) 220 (490) 248 (550) 255 (560) 134 (300) 214 (470)
Working length mm (in) 636 (25.04) 610 (24.02) 705 (27.76) 754 (29.68) 780 (30.71)
Weight kg (lb) 106 (230) 125 (280) 207 (460) 289 (640) 323 (710)
Pyramid
Part number No. 773K3 883K3 993K3 5011K3 133K3
Total length mm (in) 1120 (44.09) 1200 (47.24) 1400 (55.12) 1550 (61.02) 1550 (61.02)
Working length mm (in) 636 (25.04) 610 (24.02) 705 (27.76) 754 (29.68) 780 (30.71)
Weight kg (lb) 108 (240) 131 (290) 210 (460) 295 (650) 332 (730)
Super blunt
Part number No. 774T2 884T2 994T2 5011T2
Total length mm (in) 920 (36.22) 1100 (43.31) 1265 (49.80) 1400 (55.12)
Working length mm (in) 436 (17.17) 510 (20.08) 570 (22.44) 604 (23.78)
Weight kg (lb) 101 (220) 138 (300) 218 (480) 308 (680)

16 17
 PROPER TOOL MAINTENANCE

The tool of a hammer is a wear part and tool consumption is one of the key contributors to wear part costs. But with
thorough and regular tool maintenance, we can help reduce those costs. And who is the key person for maintenance?
The Operator.

When carrying out tool maintenance, proper safety clothes are mandatory. Please remember that a tool is extremely hot
immediately after the hammer has been working. Proper tool maintenance could be divided into daily and weekly
maintenance.

Tool maintenance should be a a part of the operators daily routine. When tool maintenance is carried out on a regular
basis, greasing frequency and performance of that grease can be monitored, operating methods adjusted, and the correct
tool type for the application selected.

Correct greasing practice

The greasing practice depends on application and operating method.
Tool grease consumption is higher in applications where the tool
is penetrating and movements are longer than in impact breaking
applications where the tool is steadily against thrust ring. Greasing
should be increased in dusty applications.

In every Rammer hammer operators manual there are instructions

for the correct greasing practices, although the operator should adjust
suitable practice for the application on a daily basis. The proper
procedure is reached when wet grease is visible about the length equal
to tool diameter on the tool just beneath the housing bottom plate.

Tool sharpening
Genuine Rammer tools can be reconditioned by milling turning or by
plaining. It is important when sharpening, that the working temperature
does not exceed 200, never use gas cutting tools as they soften the
tool and causes micro-cracks that may lead to breakages.

18 19
 Tool analyses VIDAT
What a broken tool tells us?
Problem Likely cause Remedy
Failure of the retainer pin Usually caused by idle blows Ensure that the operator is
groove Soft tool (beware of pirate tools following the instructions as
and pirate retainer pins!). detailed in the operators manual.
Use only Rammer genuine
parts and tools.
Newer model Rammer hammers
have idle blow protection

Deformation
Deformation of piston end High impact energy due to Check oil flow and pressure
of tool wrong setting of oil flow and settings on the carrier.
pressure. Use only Rammer genuine
Soft tool parts and tools
(beware of pirate tools!)

Mushrooming of tool Overheating of tool Re-positing the tool every

Working on a hard material 15 seconds during operation.
without pause for a long period Rammer hammers hit harder
of time. and are the designed to break
hard rock. Thus accelerated
wear is only natural in
extremely hard rock.

Lip
Lip formation in (fatigue) Breaking caused by excessive Adopt correct working
fracture bending. This type of stress is angle and follow operating
caused by using the wrong instructions as outlined in the
working angle or use ot the tool operators manual.
formechanical leverage.
Update your Rammer hammer with the latest in tie rod technology. Rammer has introduced this latest advance in breaking
technology, to upgrade and better maintain its existing feet of hammers. Each kit, includes 4x VIDAT tie rods for the
Fatigue failure that starts Material failure The material of Rammer tools following hammer models:
from the inside of the tool. (beware of pirate tools!) is ultrasonic-tested for large
inclusions, and such failure
occurs very rarely, but contact Part no. Description Model
your local dealer for more K40080 VIDAT tie rod x 4 G80
information. K40090 VIDAT tie rod x 4 G90 (BR3890)
K40010 VIDAT tie rod x 4 4510 (BR4510)
K40011 VIDAT tie rod x 4 4511 (BR4511)
Seizing in tool bushing Strong side loads and striking Adopt correct working angle and
Fatigue failure that starts at the same time causes the follow operating instructions as We recommend that when upgrading to the VIDAT tie rods for the first time that you also replace the upper tool bushing,
from the tool surface. surface of the tool bushing to be outlined in the operators manual.
damaged, this is caused by using piston and carry out a full service. If the hammer has been previously equipped with VIDAT tie rods, then it is possible to
Rammer offers a complete range
the wrong working angle or of tool grease as well as its range
replace two tie rods at a time providing that they are diagonally opposite to each other and the remaining two are in fit
insufficient lubrication. of Ramlube automatic lubricators condition.
to ensure constant and sufficient
lubrication.

20 21
 GREASE IS THE WORD
Ramlube
A hammers tool is subject to extreme wear that requires proper lubrication
and care if it is to achieve a long, trouble free life. Tool lubricant must have
properties to withstand high temperature and extreme pressure. Special
tool lubricants and automatic tool lubrication systems that have been
designed specifically to work with Rammer products are available from
your Rammer hammer dealer.

Part no. Description

850500 Ramlube kit

Ramlube ii
The Ramlube II kit can be fitted to most Rammer Medium and Large
Range (E- and G-series) hammers. Mounted on the hammer housing, the
system features no external electric cables or hydraulic hoses for optimum
wear and impact protection. Available as a retro fit option, Ramlube II
is ideally suited to applications in which the hammer is required to work
with more than one carrier.

Part no. Description Model

K60064 Ramlube II kit RG541 E63, E64 (BR 2063, BR 2064)
K60065 Ramlube II kit RG541 E65, E66 N (BR 2265, BR 2266)
K60100 Ramlube II kit RG541 E68, G80N, G90, G100, G110
(BR 2568, BR 3890, BR 4510, BR 4511)

953385 Seal set for greasing device

951370 Grease cartridge Special tool grease, Ramlube II cartridge.
Greasing device cartridges are sold also
in box which inludes 24 cartridges.
Tool lubrication
Hammers tool is subject to extreme wear that requires proper lubrication and care if it is to achieve a long, trouble
free life. Tool lubricant must have properties to withstand high temperature and extreme pressure. Special tool Ramlube iiI
lubricants and automatic tool lubrication systems which have been especially designed to work with Rammer products An integrated lubrication device mounted inside the hammers housing on
are available from your local Rammer dealer. the power cell itself provides maximal lubrication whilst only using minimum
grease amount, prolonging the tool and bushing life.
Part no. Description Weight The location of Ramlube III also provides it with full protecting from the
902045 Rammer tool grease 400g elements, keeping it free of moisture and dust. In colder climates the location also
902046 Rammer tool grease 18kg
acts as an advantage because the grease heats along with the hammer.
951370 Special tool grease Ramlube II 500g
Ramlube III is available as a retrofit option for 1533 and 2155.
951371 Special tool grease Ramlube II (Meissel paste) 500g

Part no. Description Model

162802 Ramlube III 1533, 2155 (BR1533, BR2155)

22 23
 Auxiliary products
Ramdata ii
The Ramdata II service indicator is designed to help hammer operators and
service personnel get information about the service interval status, service
history and accumulated working history of the hammer.

Ramdata II is a standard feature of the 3288, 4099 and 5011

Large range hammers.

For further information, please contact your nearest dealer.

Rammer Water Jet

Rammer water jet suppresses dust effectively in any application, and is
especially useful in both tunneling and demolition applications where there
is a high need to reduce the amount of dust caused by the breaking process.

Part no. Description

105761 Water Jet pump

Ramair
Air flush system produces compressed air to prevent dust entering the hammer
mechanism, whilst cooling the hammer when working in hot conditions. The
compressor is connected hydraulically to the excavator and is compact and
easy to install. The Ramair compressor enables better lubrication of the lower
tool bushing when the hammer is working in the horizontal position. Ramair
reduces wear on the hammers consumable components including the piston,
tool, tool bushing and wear plates, prolonging the hammers life cycle.

Part no. Description

95137 Ramair hydraulic air compressor

Ramona
The Ramona system monitors the hammers pressure, blow frequency,
temperature, maintenance intervals and working hours alerting the operator
in the event of a malfunction or incorrect operation. Data can be delivered via
a cable connection to a laptop computer or via mobile phone to office or local
dealer, resulting in increased productivity and reduced cost.

Part no. Description

113678 Ramona
113677 Ramona GSM

24 25
 demolition tools Wear plates and cutting blades
Rammer uses the highest quality raw materials
when producing wear parts and cutter blades
for its Demolition Tools product ranges.

Indexable parts double and in some case

quadruple the lifespan of these essiential
components, ensuring maximum value for
money.

D-jaws S-jaws Multiprocessor Jaws

D-jaws:
-Basic jaw for primary and secondary
processing of concrete.
-Maximum power and excellent
power-to-weight ratio.
-Replaceable wear parts.
-Numerous teeth options for demolition,
wood cutting, etc.

S-jaws:
-Specialist jaw for demolition of steel
reinforced concrete structures.
-Front teeth crush concrete; cutting blades
slice through steel rebar.
-Interchangeable blades ensure optimum
productivity.
A-jaws M-jaws
A-jaws:
-Wider opening jaw adds versatility while
Just like the tool for a hammer, Rammers ranges of demolition tools also have wear parts. The Rammer RB range of non-bolted teeth design provides even more
Pulverizers, Rammer RC range of Cutter Crushers and RG range of Grapples - are essential additions to any demolition solid build.
application and Rammer offers a complete range of spare parts to ensure that your productivity is maintained at its highest -Designed to meet demand for wider jaw
level at all times. opening.
-Wide opening inner teeth can crack
With four different jaw types and various other teeth options that can be attached Rammers RD Multiprocessor range can concrete.
cut, crush, pulverize and tear down even the most reinforced structure, which is something that can be achieved by using the
M-jaws:
highest quality wear parts.
-Designed for steel demolition and
occasional scrap splitting applications.
For more information on Rammer Demolition Tools and replacement wear parts please contact your local Rammer dealer.
-Beak shape jaw tip punches plates making
it possible to tear down steel structures and
welded beams.

26 27
 www.rammer.com
FI- 15101 Lahti, Finland
Taivalkatu 8, P.O.Box 165

Phone Int. +358 205 44 151

Sandvik Mining and Construction Oy
EN/03/2013/Ilme Subject to change without notice. The Rammer name and logo are registered trademarks of Sandvik Mining and Construction Oy.