D430 Z Type Hydraulic Fishing Jars Manual
D430 Z Type Hydraulic Fishing Jars Manual
D430 Z Type Hydraulic Fishing Jars Manual
CONTENTS
LEGAL NOTICE
All references to Bowen part numbers in this literature are
used to identify interchangeable tools and parts. Reference to
such tools and parts does not imply that Logan Oil Tools is a
licensee or is in any way affiliated with National Oilwell Varco.
Logan Oil Tools does not sell, or offer to sell, National Oilwell
Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
OVERVIEW
The Logan Z Type Hydraulic Fishing Jar
is used for light drilling, fishing, coring,
reaming, testing, side tracking, and
washover operations. This straight-pull
jar combines proven principles of
mechanics and hydraulics in a simple
to assemble, easy to operate design.
The tool does not interfere with the
operation of formation testers, safety
joints, or other fishing tools. It can
transmit full torque in either direction at
all times during operation. Settings and
adjustments are not necessary before
going into the hole or after the fish has
been engaged.
The Jars closed hydraulic system
contains hydraulic fluid within the Jar
and prevents well fluids from entering
the tool. The internal working parts are
constantly lubricated by the hydraulic
fluid within the tool, resulting in long-life
wear of the parts.
The intensity of jarring impact from
very light to very heavy can be
easily controlled by the operator. A
rapid series of jarring blows can be
delivered when needed. The speed is
limited only by the time it takes the
operator to raise and lower the fishing
string for each stroke.
Impact control is made possible by the
metering action of the piston
assembly. During the pull stroke, the
piston assembly meters fluid from one
cavity to another through a restricted
passage. This retarded fluid flow
delays the stroke thereby allowing the
operator ample time to stretch the
running string to strike a blow of
desired intensity.
CONSTRUCTION
Metering action does not occur when
the Jar is closed or reset. Only enough
weight to overcome friction is required
to close the tool and will not dam-age
the Jar. When the mandrel/piston
assembly is lowered, the piston rings
travel upward in their grooves. When
the Jar is reset for another stroke, large
bypass relief ports in the piston open
during the closing stroke to allow unobstructed fluid flow from the lower cavity
to the upper cavity. The piston thus
reenters the cylinder with little
resistance.
USE
The Logan Z Type Hydraulic Fishing Jar
is commonly used in fishing and coring
operations, and formation testing. The
Jar does not interfere with test
equipment or other tools an
important design feature that preserves
test data if jarring should become
necessary. The packing can withstand
higher pressures than those
encountered during formation testing.
Mandrel
The shoulder-type, splined mandrel fits
into the mating splines of the mandrel
body. The splines are always engaged
to provide a continuous source of
torque transmission whether bumping
or not. The mandrel freely moves up
and down while transmitting torque to
the mandrel body. There is a polished
seal section between the splines and
top end. A suitable knocker and washpipe are made up on the lower end of
the mandrel.
Mandrel Body
The mandrel body slides flat-end up
over the mandrel. The inside of the
mandrel body is designed with a series
of straight splines near the lower end.
These splines engage the corresponding splines of the mandrel to transmit
torque conveyed by the running through
the middle body, washpipe body, and
attached tool. A fill plug located at the
upper end of the mandrel body, similar
to the fill plug on the lower end of the
middle body, allows the Z Type
Hydraulic Fishing Jar to be filled with
oil. (See page 12 for a detailed
description of the filling process.) Two
seal assemblies (each consisting of a
non-extrusion ring, seal protector ring,
and an O-ring), seal the fluid in the
upper end of the mandrel body.
Mandrel
Mandrel Body
Middle Body Fill Plug
with O-Ring
Middle Body/
Middle Body Seal (Large)
Middle Body
Piston Seal
Non-Extrusion Ring
Seal Protector Ring
Middle Body Fill Plug
with O-Ring
Middle Body Seal (Small)
Knocker
Piston
Piston Rings
Washpipe Seal
Non-Extrusion Ring
Seal Protector Ring
Mandrel/Washpipe Seal
Washpipe
Washpipe Body
Top Sub
Mandrel Body
Middle Body/
Middle Body Seal (Large)
Middle Body
Mandrel Body/
Middle Body Seal (Small)
2 required
Mandrel
Cone
Mandrel Body Seal
Non-Extrusion Ring
Seal Protector Ring
Middle Body Fill Plug
with O-Ring
Seal Body
Mandrel/Washpipe Seal
Washpipe
Middle Body Seal (Small)
Washpipe Seal
Non-Extrusion Ring
Seal Protector Ring
Middle Body Seal (Large)
Washpipe Body
Piston
By-Pass Relief
Piston Ring
Seal Face
Piston Assembly
The piston assembly consists of a
piston, piston rings, and a piston seal
assembly consisting of an O-ring seal,
one non-extrusion ring, and one seal
protector ring.
The piston rings are in constant contact
with the bore of the middle body while
the Jar is in operation. Short grooves
in the piston allow the piston rings to
freely move up and down the cylinder.
During the pull stroke, the piston rings
are forced down against the bottom
of the grooves to form a positive metalto-metal seal against the middle body
cylinder. At the same time, the outside
diameter of the piston rings form a seal
around the bore of the middle body.
Fluid under pressure tries to flow from
above the piston to below. Gaps in the
piston rings meter and restrict the flow
of fluid between the cavities and allow
sufficient strain of desired intensity to
build to enable a blow.
Middle Body
With the mandrel body at the upper end
and the washpipe body at the lower
end, the middle body forms an oil chamber for the lubricating oil for the working
parts of the tool. The inside diameter of
the middle body is closely fitted to the
Critical Seals
Seal assemblies, consisting of O-ring
seals, seal protector rings, and nonextrusion rings, are placed in high
differential pressure areas located at
the upper end of the mandrel and the
lower end of the washpipe. As hydraulic
pressure is applied (in either direction),
the seal ring assemblies reduce normal
diametric clearance at the seal points to
nearly zero. Non-extrusion rings prevent
the O-rings from being pushed out or
rolled out of position.
Seal assemblies are placed in tandem
in places where a seal is subjected to
high pressure in both directions
OPERATION
Carefully examine the Logan Z Type
Hydraulic Fishing Jar prior to use. Ensure that it is properly assembled and
filled with hydraulic fluid. Test the Jar
in a Logan Jar Tester if one is available.
The piston must be assembled with a
piston seal with non-extrusion ring and
seal protector ring at its upper end. The
non-extrusion ring should be below the
O-ring, towards the washpipe.
Piston Ring Installation and Removal: Use the Piston Ring Pliers (Logan Part No. 26000-055),
to carefully spread the piston ring at the gap (excessive spreading will distort the ring) until its
inside diameter is larger than the pistons outside diameter. Place the piston ring in the groove,
staggering the gap, and release the pliers to install it. Lift off the expanded piston ring to remove it.
All piston rings are installed or removed in the same manner.
Piston Assembly:
5. Position the piston with the bypass
relief holes face up. Position the gap
of the piston ring in a piston ring
pliers with the narrow side up. (Top
is stenciled on the ring.) Piston rings
have a slight bevel on the outside
diameter that makes one side look
wider than the other. The wide side
should always be placed facing the
O-ring seal. Spread the ring to widen
the gap to make the inside diameter
of the ring slightly larger than the
outside diameter of the piston.
(Refer to photos above.) Place all
piston rings into the appropriate
grooves. Set completed piston
assembly aside.
6. After the seal ring assemblies have
been installed on the mandrel body,
secure the mandrel body horizontally in a vise. Clamp on the joint end.
8 Logan
Z Type
Hydraulic
Fishing
Jar
Page
8 Z Type
Hydraulic
Fishing
Jars Manual
D430
(CONTINUED)
(CONTINUED)
Properly seat the seals with the aid of the setting tool, tapping around the entire top edge
of the setting tool to seat the rings if necessary. (Setting tools are not included in the Jar
Service Kit and must be ordered separately.
Refer to Parts Lists on pages 16 28 for part
numbers.)
Mandrel or Knocker
Middle Body
Seal Assembly
Piston Ring
Piston Ring
Piston
Washpipe
12. Screw the washpipe onto the mandrel. Tighten, exercising the same
care as described for the knocker
installation. Do not wrench on the
chromed or plated areas.
15. Check and tighten all joint connections before running the tool in the
hole. They should be as tight as the
tool joints in the string. Refer to the
Maximum Recommended Tightening
Torques table on page 32.
16. Paint or lubricate exterior surfaces
to prevent corrosion.
Assembly is now complete and the tool
is ready for service.
Filling the Jar: Tilt the mandrel body end upward at a 30 angle, positioning the mandrel body fill
plug on the upper side. Connect the volume pump hose to the middle body fill plug hole. Attach the
opposite end of the hose to the volume pump. Attach the clear exhaust hose to the lower mandrel
body fill plug hole. Place the free end into the opening of the volume pump.
CAUTION: Use only enough gripping action in the vise to break the
connections. Avoid making heavy
tool marks.
1. Secure the upper middle body end
centered horizontally into a suitable
vise.
2. Break the connections between the
washpipe body and mandrel body.
3. Position a clean, open-mouthed
receptacle under the washpipe body
joint to catch draining oil.
16. Carefully examine the piston assembly. Using the piston ring pliers
(Logan Part No. 26000-055), carefully spread each ring at the gap
until the inside diameters are larger
than the pistons inside diameter.
Lift off the piston rings. Excessive
spreading will distort the rings. Refer
to the photos on page 7.
17. Remove the fill plugs from the mandrel body and middle body and
install new O-ring seals on the fill
plugs.
18. Examine all parts for defects, including the piston, middle body bore,
tool joint threads, and especially any
polished surfaces for pits or scratches. Minor abrasions, nicks, galls, or
burrs may be removed with fine
emery cloth or a small hand file.
Parts with polished surfaces (mandrel washpipe, and middle body
bore) that have become deeply
pitted or gouged must be replaced
with new parts prior to reassembly.
Any damage to the piston ring seating surface will render the piston
unusable.
OVERVIEW
CONSTRUCTION
7/8
Sucker Rod
1-5/8
1/4
7-1/16
Sub
1-13/16
Wilson FJ
1-13/16
5/16
7
Special
605-000
70822
TOP SUB
MANDREL
PISTON ASSEMBLY
(Ring Type Standard)
MANDREL BODY
MIDDLE BODY
WASHPIPE BODY
KNOCKER
WASHPIPE
MANDREL BODY
FILL PLUG
MIDDLE BODY
FILL PLUG
PACKING SET
JAR LUBE
2-3/8 PH6
5.9# Hyd Bx
2-29/32
1
11-7/16
Sub
2-3/8
EUE
3-1/16
1-1/2
11-9/16
Sub
605-001
74723
1-1/4
API Reg
2-1/4
3/8
6-15/16
Integral
Mandrel
605-002
54020
605-004
55670
2-3/8
API Reg
3-1/8
1
11-13/16
Integral
Mandrel
605-005
52504
2-7/8
API Reg
3-3/4
1-1/4
11-13/16
Integral
Mandrel
605-006
52506
605-003
68010
AG3000
70823
AG4000
70825
26000-018
70853
AG5000
70824
AG6000
70826
AG7000
70829
...
AG9000
70828
AG10000
617
26000-036
70961
AG3001
21156
AG4001
21155
26000-019
74725
AG5001
21153
AG6001
74724
AG7001
21151
...
AG9001
21154
AG10000
617
...
26000-037
74802
...
...
AG4002
18780
26000-020
59585
AG5002
56571
AG6002
18777
AG7002
18776
AG8002
18781
AG9002
18779
AG10002
329
AG10000
617
26000-038
18793
AG3003
68015
AG4003
68014
26000-021
68019
AG5003
68013
AG6003
68012
AG7003
68011
AG9003
68016
AG10000
617
AG10004
10641
26000-039
68017
AG3004
55889
AG4004
55888
26000-022
56368
AG5004
55887
AG6004
55886
AG7004
55885
AG9004
55890
AG10000
617
AG10004
10641
26000-040
55924
...
...
AG4005
38056
26000-023
61282
AG5005
52764
AG6005
42737
AG7005
38064
AG8005
38060
AG9005
42738
AG10002
329
AG10000
617
26000-041
44622
...
...
AG4006
38041
26000-024
68128
AG5006
52770
AG6006
38044
AG7006
38045
AG8006
38049
AG9006
38046
AG10002
329
AG10000
617
26000-042
38048
49842-A
49842-A
1 Gallon
49842-B
49842-B
5 Gallons
49842-C
49842-C
20 Gallons
49842-D
49842-D
55 Gallons
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Special Notes:
(1) Packing Sets include all seals necessary to dress the tool. Non-Extrusion Rings
and Seal Protector Rings are not included, and must be ordered separately.
(2) Jar Service Kit does not include Seal Setting Tools or Piston Ring Pliers, which must be ordered separately.
When ordering, please specify:
(1) Name and number of assembly or part
(2) Connections, if other than standard
(3) Outside diameter, if other than standard
Recommended Spares:
(1) 1 Jar Service Kit
(2) 1 Washpipe
(3) 2 Piston Assemblies
(4) 16 Non-Extrusion Rings
(5) 16 Seal Protector Rings
(6) 4 Mandrel Body Fill Plugs
(7) 4 Middle Body Fill Plugs
(8) 8 Packing Sets
(9) 1 Mandrel Body Setting Tool
(10) 1 Piston Setting Tool
(11) 1 Piston Ring Pliers
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
7/8
Sucker Rod
1-5/8
1/4
7-1/16
Sub
1-13/16
Wilson FJ
1-13/16
5/16
7
Special
2-3/8 PH6
5.9# Hyd Bx
2-29/32
1
11-7/16
Sub
2-3/8
EUE
3-1/16
1-1/2
11-9/16
Sub
605-001
74723
1-1/4
API Reg
2-1/4
3/8
6-15/16
Integral
Mandrel
605-002
54020
605-000
70822
MANDREL
Logan Part No.
NON-EXTRUSION RING Bowen No.
No. Reqd
MANDREL SEAL
Logan Part No.
PROTECTOR RING
Bowen No.
No. Reqd
MANDREL BODY
Logan Part No.
NON-EXTRUSION RING Bowen No.
MANDREL BODY
Logan Part No.
INSERT
Bowen No.
MANDREL BODY SEAL Logan Part No.
PROTECTOR RING
Bowen No.
L365-16
365-16
8
L375-16
375-16
8
...
AG11000
71254
605-004
55670
2-3/8
API Reg
3-1/8
1
11-13/16
Integral
Mandrel
605-005
52504
2-7/8
API Reg
3-3/4
1-1/4
11-13/16
Integral
Mandrel
605-006
52506
605-003
68010
L365-17
365-17
4
L375-17
375-17
4
...
L365-24
365-24
4
L375-24
375-24
4
L56542
56542
L227-27.25
227-27.25
L365-30.5
365-30.5
8
L375-30.5
375-30.5
8
L364-32.5
364-32.5
8
L375-32.5
375-32.5
8
...
...
L365-32
365-32
8
L375-32
375-32
8
...
L365-35
365-35
8
L375-35
375-35
8
...
...
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Special Notes:
(1) Packing Sets include all seals necessary to dress the tool. Non-Extrusion Rings
and Seal Protector Rings are not included, and must be ordered separately.
(2) Jar Service Kit does not include Seal Setting Tools or Piston Ring Pliers, which must be ordered separately.
When ordering, please specify:
(1) Name and number of assembly or part
(2) Connections, if other than standard
(3) Outside diameter, if other than standard
Recommended Spares:
(1) 1 Jar Service Kit
(2) 1 Washpipe
(3) 2 Piston Assemblies
(4) 16 Non-Extrusion Rings
(5) 16 Seal Protector Rings
(6) 4 Mandrel Body Fill Plugs
(7) 4 Middle Body Fill Plugs
(8) 8 Packing Sets
(9) 1 Mandrel Body Setting Tool
(10) 1 Piston Setting Tool
(11) 1 Piston Ring Pliers
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
7/8
1-13/16
7/8
1-13/16
Sucker Rod Wilson FJ
Sucker Rod Wilson FJ
1-5/8
1-13/16
1-5/8
1-13/16
1/4
5/16
1/4
5/16
7-1/16
7
7-1/16
7
Sub
Special
2-3/8
2-3/8
Sub
Special
EUE
API Reg
605-000
605-001
3-1/16
3-1/8
605-000
605-001
70822
74723
1-1/2
1
70822
74723
11-9/16
26000-018 11-13/16
26000-019
26000-018
26000-019
Sub
Integral
70853
74725
70853
74725
Mandrel
605-004
AG15000 605-005
AG15000
55670
52504
70827
70827
L66164
26000-022
26000-023
L66164
66164
56368
61282
66164
AG15005
61283
L61284
61284
568-223
568223
26000-019
26000-019
L370-3.5
L370-1
74725
74725
370-3.5
370-1
L376-3.5
L376-1
AG14001
AG14001
376-3.5
376-1
74726
74726
AG13001
AG13001
74727
74727
1-1/4
1-1/4
API Reg
API Reg
2-1/4
2-1/4
3/8
3/8
6-15/16
6-15/16
Integral
2-7/8
Integral
Mandrel
API
Reg
Mandrel
605-002
3-3/4
605-002
54020
1-1/4
54020
11-13/16
26000-020
26000-020
Integral
59585
59585
Mandrel
605-006
AG15002
AG15002
52506
59586
59586
26000-024
68128
L18783
AG15006
L18783
18783
68127
18783
2 4
568-214
568-214
568214
568214
L61287
L365-19
L365-19
61287
365-19
365-19
2 L375-19
L375-19
568-226
375-19
375-19
568226
L370-4
370-4
L376-4
376-4
......
Part
PISTON
RING
Bowen
No.
70827
59586
No.
Bowen
No.Reqd
Reqd
L66164
No.
66164
Part
SEAL
Logan
PartNo.
No.
SEAL
Logan
2
No.
Bowen
No.
Bowen
L18783
Part
NON-EXTRUSION
RING Logan
Logan
PartNo.
No.
NON-EXTRUSION
RING
18783
No.
Bowen
No.
Bowen
2
Part
Logan
PartNo.
No.
SEAL
Logan
568-214
No.
PROTECTOR
RING
Bowen
No.
PROTECTOR
RING
Bowen
Part
TYPE 568214
Logan
PartNo.
No.
TYPE
Logan
CONE
L365-19
L370-1.5
ASSEMBLY
Bowen
No.
PISTON
ASSEMBLY
Bowen
No.
370-1.5
of: 365-19
Consists
of:
L375-19
L376-1.5
Logan
PartNo.
No.
CONE
Logan
Part
375-19
376-1.5
Bowen
No.
Bowen
No.
26000-019BODY
Part
BY-PASS
Logan
BODY
Logan
PartNo.
No.
74725
No.
Bowen
Bowen
No.
SEAL BODY
Logan
AG12001
BODY
LoganPart
PartNo.
No.
AG12001
AG14001
AG14003
AG14004
74728
Bowen
No.
......
Bowen
No.
74728
74726BODY
...
68020
...568-020
SEAL
Logan
Part
BODY SEAL
SEAL
Logan
PartNo.
No. 55891
568-020
AG13001
No.
568020
Bowen
Bowen
No.
568020
74727
...
...
Logan
Oil Tools
right
or
notice.
Tools
reserves the
the
rightto
tochange
change
ordiscontinue
discontinue
designswithout
without
notice.
AG12001
reserves
AG12003
AG12004
designs
...
74728
68021
55892
...
Special
Special Notes:
Notes:
568-020
include
568-224
568-226
Non-Extrusion
Rings
(1)
Packing
necessary
dress
(1)
Packing Sets
Sets
include all
all seals
seals
necessarytoto
dressthe
thetool.
tool.
Non-Extrusion
Rings
568020
568224
...
and
Rings
not
and
and Seal
Seal Protector
Protector
Rings are
are
notincluded,
included,568226
andmust
mustbe
beordered
orderedseparately.
separately.
2-3/8 PH6
2-3/8 PH6
5.9# Hyd Bx
5.9# Hyd Bx
2-29/32
2-29/32
1
1
11-7/16
11-7/16
Sub
Sub
2-3/8
2-3/8
EUE
EUE
3-1/16
3-1/16
1-1/2
1-1/2
11-9/16
11-9/16
Sub
Sub
605-003
605-003
68010
68010
26000-021
26000-021
68019
68019
2-3/8
2-3/8
API Reg
API Reg
3-1/8
3-1/8
1
1
11-13/16
11-13/16
Integral
Integral
Mandrel
Mandrel
605-004
605-005
605-004
605-005
55670
52504
55670
52504
26000-022
26000-023
26000-022
26000-023
56368
61282
56368
61282
2-7/8
2-7/8
API Reg
API Reg
3-3/4
3-3/4
1-1/4
1-1/4
11-13/16
11-13/16
Integral
Integral
Mandrel
Mandrel
605-006
605-006
52506
52506
26000-024
26000-024
68128
68128
L370-1.5
L370-1.5
370-1.5
370-1.5
L376-1.5
L376-1.5
376-1.5
376-1.5
L370-3.5
L370-3.5
370-3.5
370-3.5
L376-3.5
L376-3.5
376-3.5
376-3.5
AG15005
AG15005
61283
61283
L61284
L61284
61284
61284
44
568-223
568-223
568223
568223
L370-1
L370-1
370-1
370-1
L376-1
L376-1
376-1
376-1
AG15006
AG15006
68127
68127
L61287
L61287
61287
61287
2 2
568-226
568-226
568226
568226
L370-4
L370-4
370-4
370-4
L376-4
L376-4
376-4
376-4
AG14003
AG14003
68020
68020
......
AG12003
AG12003
68021
68021
568-224
568-224
568224
568224
AG14004
AG14004
55891
55891
AG12004
AG12004
55892
55892
568-226
568-226
568226
568226
... ...
... ...
... ...
... ...
(2)
Jar
Kit
not
(2)designs
Jar Service
Service
Kit does
does
not include
includeSeal
SealSetting
SettingTools
ToolsororPiston
PistonRing
RingPliers,
Pliers,which
whichmust
mustbebeordered
orderedseparately.
separately.
ge or discontinue
without
notice.
When
When ordering,
ordering, please
please specify:
specify:
o dress the tool. Non-Extrusion
Rings
(1)
(1) Name
Name and
and number
number of
of assembly
assemblyor
orpart
part
, and must be ordered
separately.
(2)
(2) Connections,
Connections, ifif other
other than
than standard
standard
ng Tools or Piston
Ring Pliers,
which must be ordered
separately.
(3)
(3) Outside
Outside diameter,
diameter, ifif other
other than
thanstandard
standard
Recommended Spares:
(1) 1 Jar Service Kit
(2) 1 Washpipe
(3) 2 Piston Assemblies
(4) 16 Non-Extrusion Rings
(5) 16 Seal Protector Rings
(6) 4 Mandrel Body Fill Plugs
(7) 4 Middle Body Fill Plugs
(8) 8 Packing Sets
(9) 1 Mandrel Body Setting Tool
(10) 1 Piston Setting Tool
(11) 1 Piston Ring Pliers
18 Logan Z Type Hydraulic Fishing Jar
18 Logan Z Type Hydraulic Fishing Jar
Page 18 Z Type Hydraulic Fishing Jars Manual D430
LEGAL
NOTICE
Recommended
Spares:
Recommended
Spares:
(1)
1
Jar
Service
Kit
All
references
to Bowen part numbers in this literature are used to
(1) 1 Jar Service Kit
(2)
identify interchangeable tools and parts. Reference to such tools and
(2)11Washpipe
Washpipe
(3)
parts does not imply that Logan Oil Tools is a licensee or is in any
(3)22Piston
PistonAssemblies
Assemblies
(4)
Rings
way affiliated
(4)16
16Non-Extrusion
Non-Extrusion
Ringswith National Oilwell Varco. Logan Oil Tools does not
(5)
sell, or Rings
offer
to sell, National Oilwell Varco (Bowen) products.
(5)16
16Seal
SealProtector
Protector
Rings
(6)
(6)44Mandrel
MandrelBody
BodyFill
FillPlugs
Plugs
(7)
(7)44Middle
MiddleBody
BodyFill
FillPlugs
Plugs
Bowen
is a registered trademark of National Oilwell Varco.
(8) 8 Packing Sets
(8) 8 Packing Sets
(9) 1 Mandrel Body Setting Tool
(9) 1 Mandrel Body Setting Tool
(10) 1 Piston Setting Tool
(10) 1 Piston Setting Tool
(11) 1 Piston Ring Pliers
(11) 1 Piston Ring Pliers
7/8
Sucker Rod
1-5/8
1/4
7-1/16
Sub
1-13/16
Wilson FJ
1-13/16
5/16
7
Special
2-3/8 PH6
5.9# Hyd Bx
2-29/32
1
11-7/16
Sub
2-3/8
EUE
3-1/16
1-1/2
11-9/16
Sub
605-001
74723
1-1/4
API Reg
2-1/4
3/8
6-15/16
Integral
Mandrel
605-002
54020
605-000
70822
AG1000-16
22709-16
26000-055
26000-054
21279
26000-036
70961
568-211
568211
4
568-216
568216
2
568-214
568214
3
605-004
55670
2-3/8
API Reg
3-1/8
1
11-13/16
Integral
Mandrel
605-005
52504
2-7/8
API Reg
3-3/4
1-1/4
11-13/16
Integral
Mandrel
605-006
52506
605-003
68010
AG1000-17
22709-17
...
26000-055
26000-055
55403
26000-73
149945
26000-037
74802
568-212
568212
4
568-019
568019
2
568-027
568027
3
568-115
568115
AG1000-24
22709-24
AG1000-19
22709-19
26000-055
26000-055
55403
26000-074
149884
26000-038
18793
568-219
568219
4
568-224
568224
2
568-228
568228
3
568-210
568210
AG1000-29.5
22709-29.5
AG1000-30.5
22709-30.5
26000-055
26000-055
55403
26000-039
68017
568-328
568328
4
568-036
568036
2
568-035
568035
3
568-224
568224
AG1000-32.5
22709-32.5
AG1000-31
22709-31
26000-055
26000-055
55403
26000-076
148247
26000-040
55924
568-330
568330
4
568-038
568038
2
568-036
568036
3
568-226
568226
AG1000-32
22709-32
AG1000-29
22709-29
26000-055
26000-055
55403
26000-077
73659
26000-041
44622
568-329
568329
4
568-231
568231
2
568-228
568228
3
568-220
568220
AG1000-35
22709-3
AG1000-32
22709-32
26000-055
26000-055
55403
26000-078
80004
26000-042
38048
568-332
568332
4
568235
2
568-233
568233
3
568-222
568222
OPTIONAL
MANDREL BODY
Logan Part No.
SETTING TOOL
Bowen No.
PISTON SETTING TOOL Logan Part No.
Bowen No.
PISTON RING PLIERS
Logan Part No.
Bowen No.
JAR SERVICE KIT
Logan Part No.
Bowen No.
HI-TEMPERATURE
Logan Part No.
PACKING SET
Bowen No.
PACKING SET
Logan Part No.
Consists of:
Bowen No.
MANDREL/
Logan Part No.
WASHPIPE SEAL
Bowen No.
No. Reqd
LARGE MIDDLE
Logan Part No.
BODY SEAL
Bowen No.
No. Reqd
SMALL MIDDLE
Logan Part No.
BODY SEAL
Bowen No.
No. Reqd
WASHPIPE SEAL
Logan Part No.
Bowen No.
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Special Notes:
(1) Packing Sets include all seals necessary to dress the tool. Non-Extrusion Rings
and Seal Protector Rings are not included, and must be ordered separately.
(2) Jar Service Kit does not include Seal Setting Tools or Piston Ring Pliers, which must be ordered separately.
When ordering, please specify:
(1) Name and number of assembly or part
(2) Connections, if other than standard
(3) Outside diameter, if other than standard
Recommended Spares:
(1) 1 Jar Service Kit
(2) 1 Washpipe
(3) 2 Piston Assemblies
(4) 16 Non-Extrusion Rings
(5) 16 Seal Protector Rings
(6) 4 Mandrel Body Fill Plugs
(7) 4 Middle Body Fill Plugs
(8) 8 Packing Sets
(9) 1 Mandrel Body Setting Tool
(10) 1 Piston Setting Tool
(11) 1 Piston Ring Pliers
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
7/8
Sucker Rod
1-5/8
1/4
7-1/16
Sub
1-13/16
Wilson FJ
1-13/16
5/16
7
Special
605-000
70822
MANDREL BODY
FILL PLUG SEAL
MIDDLE BODY
FILL PLUG SEAL
PISTON SEAL
JAR LUBE
2-3/8 PH6
5.9# Hyd Bx
2-29/32
1
11-7/16
Sub
2-3/8
EUE
3-1/16
1-1/2
11-9/16
Sub
605-001
74723
1-1/4
API Reg
2-1/4
3/8
6-15/16
Integral
Mandrel
605-002
54020
605-004
55670
2-3/8
API Reg
3-1/8
1
11-13/16
Integral
Mandrel
605-005
52504
2-7/8
API REG
3-3/4
1-1/4
11-13/16
Integral
Mandrel
605-006
52506
605-003
68010
568-005
568005
8-024
8-024
568-015
568015
568-024
568024
568-005
568005
568-006
568006
568-005
568005
568-214
568214
568-005
568005
568-006
568006
568-006
568006
568-005
568005
568-223
568223
568-006
568006
568-005
568005
568-226
568226
49842-A
49842-A
1 Gallon
49842-B
49842-B
5 Gallons
49842-C
49842-C
20 Gallons
49842-D
49842-D
55 Gallons
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Special Notes:
(1) Packing Sets include all seals necessary to dress the tool. Non-Extrusion Rings
and Seal Protector Rings are not included, and must be ordered separately.
(2) Jar Service Kit does not include Seal Setting Tools or Piston Ring Pliers, which must be ordered separately.
When ordering, please specify:
(1) Name and number of assembly or part
(2) Connections, if other than standard
(3) Outside diameter, if other than standard
Recommended Spares:
(1) 1 Jar Service Kit
(2) 1 Washpipe
(3) 2 Piston Assemblies
(4) 16 Non-Extrusion Rings
(5) 16 Seal Protector Rings
(6) 4 Mandrel Body Fill Plugs
(7) 4 Middle Body Fill Plugs
(8) 8 Packing Sets
(9) 1 Mandrel Body Setting Tool
(10) 1 Piston Setting Tool
(11) 1 Piston Ring Pliers
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
2-3/8 API IF
3-3/4
1-1/2
12-1/8
Sub
2-3/8 EUE
3-3/4
1-7/8
10-1/8
Sub
605-007
52528
TOP SUB
AG3007
37412
AG4007
37411
26000-025
61288
AG5007
52771
AG6007
20152
AG7007
37407
...
AG9007
37410
AG10002
329
AG10000
617
26000-043
37415
MANDREL
PISTON ASSEMBLY
(Ring Type Standard)
MANDREL BODY
MIDDLE BODY
WASHPIPE BODY
KNOCKER
WASHPIPE
MANDREL BODY
FILL PLUG
MIDDLE BODY
FILL PLUG
PACKING SET
605-008
52497
2-7/8 API IF
4-1/4
1-15/16
11-13/16
Integral
Mandrel
605-009
52502
2-7/8 EUE
4-1/2
2-3/8
12-1/4
Integral
Mandrel
605-010
52653
3-1/2 API FH
4-3/4
1-1/2
11-13/16
Integral
Mandrel
605-011
52530
3-1/2 API IF
4-3/4
2
13-5/16
Integral
Mandrel
605-012
52500
3-1/2 API IF
4-3/4
2-1/4
Integral
Mandrel
605-018
AG3008
20156
AG4008
20155
26000-026
61285
AG5008
52772
AG6007
20152
AG7008
20151
...
AG9008
20154
AG10002
329
AG10000
617
26000-044
20163
AG4009
44484
26000-027
68420
AG5009
52780
AG6009
41840
AG7009
44487
AG8009
44490
AG9009
44488
AG10002
329
AG10000
617
26000-045
44491
AG4010
35850
26000-028
68421
AG5010
52815
AG6010
35853
AG7010
35854
AG8010
35857
AG9010
35855
AG10002
329
AG10000
617
26000-046
35858
...
...
AG4011
25965
26000-029
55285
AG5011
52749
AG6011
25962
AG7011
25961
AG8011
25966
AG9011
25964
AG10002
329
AG10002
329
26000-047
25892
...
AG4012
38115
26000-030
55193
AG5012
52833
AG6012
38112
AG7012
38111
AG8012
38116
AG9012
38114
AG10002
329
AG10002
329
26000-048
38120
...
AG40125
38115
26000-030
55193
AG5012
52833
AG6012
38112
AG70125
38111
AG8012
38116
AG90125
38114
AG10002
329
AG10002
329
26000-048
38120
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Special Notes:
(1) Packing Sets include all seals necessary to dress the tool. Non-Extrusion Rings
and Seal Protector Rings are not included, and must be ordered separately.
(2) Jar Service Kit does not include Seal Setting Tools or Piston Ring Pliers, which must be ordered separately.
When ordering, please specify:
(1) Name and number of assembly or part
(2) Connections, if other than standard
(3) Outside diameter, if other than standard
Recommended Spares:
(1) 1 Jar Service Kit
(2) 1 Washpipe
(3) 2 Piston Assemblies
(4) 16 Non-Extrusion Rings
(5) 16 Seal Protector Rings
(6) 4 Mandrel Body Fill Plugs
(7) 4 Middle Body Fill Plugs
(8) 8 Packing Sets
(9) 1 Mandrel Body Setting Tool
(10) 1 Piston Setting Tool
(11) 1 Piston Ring Pliers
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
Manual D430
ZZ
Type
Hydraulic
Fishing
Jars Jar
Page
21
Logan
Type
Hydraulic
Fishing
21
12-1/8
10-1/8
11-13/16
12-1/4
11-13/16
12-1/4
11-13/16
13-5/16
Integral
Integral
Integral
Integral
Integral11-13/16
IntegralSub
IntegralSub
IntegralIntegral Mandrel
IntegralIntegral Mandrel
IntegralIntegral
Mandrel
Mandrel
Mandrel
Mandrel605-012
Mandrel605-018
Mandrel
Mandrel
Mandrel
Mandrel
MandrelMandrel
COMPLETE ASSEMBLY Logan Part No.
605-007
605-008
605-009
605-010
605-011
COMPLETE
ASSEMBLY
Logan
Part
No.
605-007
605-008
605-009
605-010
605-011
COMPLETE ASSEMBLY Bowen
Logan Part
No.
605-007
605-008
605-009
605-010
605-011
605-012
605-018
No.
52528
52497
52502
52653
52530
52500
Bowen No. 52502 52528 52653 52497 52530 52502 52500 52653
52530
Bowen No.
52528
52497
MANDREL
Logan Part No.
L365-36
L365-36
L365-40
L365-42
L365-40
L365-41
L365-41
Logan Part No.
MANDREL
No.
L365-36
L365-36
L365-40
NON-EXTRUSION RING Logan
Bowen Part
No.MANDREL
365-36
365-36
365-40 L365-36L365-42
365-42 L365-36L365-40
365-40L365-40L365-41
365-41L365-42L365-41
365-41 L365-40
RING365-36
365-36 365-42
365-36 365-40
365-40 365-41
365-42 365-41
365-40
NON-EXTRUSION RING Bowen
No.NON-EXTRUSION
365-36
No. Reqd
8
8 Bowen No. 365-40
8
8
8
8
8
8
8
8
8
8
No. Reqd
8
8 No. Reqd L375-40
8
8
8
8
8
MANDREL SEAL
Logan
Part No.
L375-36
L375-36
L375-42
L375-40
L375-41
L375-41
SEAL
Logan Part No.
MANDREL
SEAL
Logan
No.
L375-36
L375-36
L375-40
PROTECTOR
RING
Bowen Part
No.MANDREL
375-36
375-36
375-40 L375-36L375-42
375-42 L375-36L375-40
375-40L375-40L375-41
375-41L375-42L375-41
375-41 L375-40
375-36 375-42
375-36 375-40
375-40 375-41
375-42 375-41
375-40
PROTECTOR RING
Bowen
No.PROTECTOR
375-36
375-36
No. Reqd
8 RING
8 Bowen No. 375-40
8
8
8
8
8
8
8
8
8
8
No. Reqd
8
8 No. Reqd
8
8
8
8
8
MANDREL BODY
Logan
Part No.
MANDREL
BODY RING Logan
No.
NON-EXTRUSION
Bowen Part
No.MANDREL
...BODY
Logan Part No.
...
...
...
NON-EXTRUSION
RING
Bowen
No.
...
...
...
NON-EXTRUSION
RING
Bowen
No.
...
...
...
...
MANDREL BODY
Logan Part No.
MANDREL
BODY
Logan Part
No.
BODY
Logan Part No.
INSERT
Bowen
No.MANDREL
...
...
...
...
...
...
...
INSERT
No.INSERT
...
...
...
MANDREL BODY SEAL Bowen
Logan Part
No.
MANDREL
BODY
SEAL Bowen
Logan Part
No.
BODY SEAL
Logan Part No.
PROTECTOR
RING
No.MANDREL
...
RING
Bowen No.
...
PROTECTOR
Bowen
No.PROTECTOR
...
WAVE
SPRING
Logan
Part
No.
WAVE SPRING
Logan
Part
No.
Bowen No.
Bowen
No.
No. Reqd
Bowen No.
No. Reqd
No.
Reqd
PISTON RING
Logan
Part No.
L61287
L61287
L68414
L68416
L25968
L25293
L25293
PISTON
RING
Logan
Part
No.
L61287
L61287
L68414
L68416
PISTON RING
Logan
Part
No.
L61287
L61287
L68414
L68416
L25968
L25293
L25293
Bowen No.
61287
61287
68414
68416
25968
25293
25293 L25968
61287 68416
61287 25968
68414 25293
68416 25293
25968
Bowen
No.
61287
61287
No. Reqd
4
4 Bowen No. 68414
3
3
2
2
2
No. Reqd 3
3
3
No.
Reqd
4
4
3
2
2
2
SEAL
Logan
Part No.
568-228
568-229
568-2314
568-2334
568-231
568-232
568-2322
Logan Part No.
SEAL
Logan
No.
568-228
568-229
568-231
Bowen Part
No.SEAL
568228
568229
568231568-228568-233
568233568-229568-231
568231568-231568-232
568232568-233568-232
568232568-231
Bowen No. 568231
568231 568232
568233 568232
No. No.
568228
568229
NON-EXTRUSION RING Bowen
Logan Part
L370-6
L52495
L370-9 568228568233
L370-11568229 568231
L370-8.5
L370-10
L370-10568231
NON-EXTRUSION
RING
Logan
Part
No.
L370-6
L52495
L370-9
L370-11
NON-EXTRUSION RING Logan
Part
No.
L370-6
L52495
L370-9
L370-11
L370-8.5
L370-10
L370-10
Bowen No.
370-6
52495
370-9
370-11
370-8.5
370-10
370-10 L370-8.5
Bowen No. 370-9
370-9 370-10
370-11 370-10
Bowen
No. No.
370-6
52495
SEAL PROTECTOR
Logan Part
L376-6
L52496
L376-9 370-6 370-11
L376-1152495 370-8.5
L376-8.5
L376-10
L376-10370-8.5
Logan Part No.
SEAL
Logan
No. PROTECTOR
L376-6
L52496
L376-9
RING PROTECTOR
Bowen Part
No.SEAL
376-6
52496
376-9 L376-6 L376-11
376-11 L52496 L376-8.5
376-8.5L376-9 L376-10
376-10L376-11L376-10
376-10 L376-8.5
Bowen No. 376-9 376-6 376-11 52496 376-8.5376-9 376-10376-11 376-10 376-8.5
RING
Bowen No.RING
376-6
52496
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan
Oil Tools
reserves designs
the rightwithout
to change
or discontinue designs without notice.
Logan Oil Tools reserves the right to
change
or discontinue
notice.
Special Notes:
Specialto
Notes:
Special
Notes:
(1) Packing
Sets include all seals necessary
dress the tool. Non-Extrusion Rings and Seal Protector Rings
(1) Packing
Setsthe
include
all seals necessary
dress
theProtector
tool. Non-Extrusion
Rings and Seal Protector Rings
(1) Packing
Sets include
seals
to dress
tool. Non-Extrusion
Ringsto and
Seal
Rings
are not included,
and all
must
be necessary
ordered
separately.
not included,
and must
ordered
separately.
not included,
andnot
must
be ordered
separately.
(2) are
Jar Service
Kit does
include
Seal are
Setting
Tools or Piston
Ringbe
Pliers,
which
must be ordered separately.
(2) Jar
Service
Kitordoes
notRing
include
Seal
Setting
Tools
or Pistonseparately.
Ring Pliers, which must be ordered separately.
(2) Jar Service Kit does not include Seal
Setting
Tools
Piston
Pliers,
which
must
be ordered
Recommended Spares:
When ordering, please specify:
Recommended
When
ordering,
please
(1) 1 Jar ServiceSpares:
Kit
(1) Name
and number
of specify:
assembly orWhen
part ordering, please specify:
(1) 1
1 Washpipe
Jar or
Service
Name and number of assembly
part Kit
(1)
and number
of than
assembly
or(1)
part
(2)
(2) Name
Connections,
if other
standard
(2) standard
1 Piston
Washpipe
(2) Connections, if other than
(2)
if other
than than
standard
(3)
2
Assemblies
(3) Connections,
Outside diameter,
if other
standard
(3)than
2 Piston
Assemblies
(3) Outside diameter, if other
standard
(3) Outside diameter, if other than standard
(4)
16
Non-Extrusion
Rings
(4)
16
Non-Extrusion
(5) 16 Seal Protector Rings
Rings
(5) 4
16Mandrel
Seal Protector
Rings
(6)
Body Fill
Plugs
LEGAL NOTICE
(6) 4
4 Middle
MandrelBody
BodyFill
FillPlugs
Plugs
(7)
Recommended Spares:
(1) 1 Jar Service Kit
(2) 1 Washpipe
(3) 2 Piston Assemblies
(4) 16 Non-Extrusion Rings
(5) 16 Seal Protector Rings
(6) 4 Mandrel Body Fill Plugs
(7) 4 Middle Body Fill Plugs
(8) 8 Packing Sets
(9) 1 Mandrel Body Setting Tool
(10) 1 Piston Setting Tool
(11) 1 Piston Ring Pliers
3-1/2 AP
4-3/4
2
13-5/16
Integral
Mandrel
605-012
52500
L365-41
365-41
8
L375-41
375-41
8
26000-03
55193
AG15012
55194
L25293
25293
2
568-232
568232
L370-10
370-10
L376-10
376-10
2-3/8 API IF
3-3/4
1-1/2
12-1/8
Sub
605-007
52528
CONE TYPE
PISTON ASSEMBLY
Consists of:
CONE
BY-PASS BODY
SEAL BODY
SEAL BODY SEAL
2-3/8 EUE
3-3/4
1-7/8
10-1/8
Sub
Mandrel
605-008
52497
2-7/8 API IF
4-1/4
1-15/16
11-13/16
Integral
Mandrel
605-009
52502
2-7/8 EUE
4-1/2
2-3/8
12-1/4
Integral
Mandrel
605-010
52653
3-1/2 API FH
4-3/4
1-1/2
11-13/16
Integral
Mandrel
605-011
52530
3-1/2 API IF
4-3/4
2
13-5/16
Integral
Mandrel
605-012
52500
3-1/2 API IF
4-3/4
2-1/4
Integral
605-018
...
...
...
...
...
...
...
...
...
...
...
...
AG1000-36
22709-36
AG1000-34
22709-34
26000-055
26000-055
55403
AG1000-36
22709-36
AG2000
54922
26000-055
26000-055
55403
AG1000-40
22709-40
AG1000-37
22709-37
26000-055
26000-055
55403
26000-081
78330
AG1000-42
22709-42
AG1000-39
22709-39
26000-055
26000-055
55403
AG1000-40
22709-40
AG1000-36.5
22709-36.5
26000-055
26000-055
55403
26000-083
80115
AG1000-41
22709-41
AG1000-38
22709-38
26000-055
26000-055
55403
26000-084
80005
AG1000-41
22709-41
AG1000-38
22709-38
26000-055
26000-055
55403
26000-084
80005
OPTIONAL
MANDREL BODY
Logan Part No.
SETTING TOOL
Bowen No.
PISTON SETTING TOOL Logan Part No.
Bowen No.
PISTON RING PLIERS
Logan Part No.
Bowen No.
JAR SERVICE KIT
Logan Part No.
Bowen No.
HI-TEMPERATURE
Logan Part No.
PACKING SET
Bowen No.
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Special Notes:
(1) Packing Sets include all seals necessary to dress the tool. Non-Extrusion Rings
and Seal Protector Rings are not included, and must be ordered separately.
(2) Jar Service Kit does not include Seal Setting Tools or Piston Ring Pliers, which must be ordered separately.
When ordering, please specify:
(1) Name and number of assembly or part
(2) Connections, if other than standard
(3) Outside diameter, if other than standard
Recommended Spares:
(1) 1 Jar Service Kit
(2) 1 Washpipe
(3) 2 Piston Assemblies
(4) 16 Non-Extrusion Rings
(5) 16 Seal Protector Rings
(6) 4 Mandrel Body Fill Plugs
(7) 4 Middle Body Fill Plugs
(8) 8 Packing Sets
(9) 1 Mandrel Body Setting Tool
(10) 1 Piston Setting Tool
(11) 1 Piston Ring Pliers
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
JAR LUBE
JAR LUBE
Bowen No.
Logan Part No.
Logan Part No.
Bowen No.
Bowen No.
Logan
Logan Part
Part No.
No.
Bowen
Bowen No.
No.
Logan
Part No.
No. Reqd
Bowen No.
Logan Part No.
No. Reqd
Bowen No.
Logan Part No.
No. Reqd
Bowen No.
Logan Part No.
No. Reqd
Bowen No.
Logan Part No.
No. Reqd
Bowen No.
Logan Part No.
No. Reqd
Bowen No.
Logan Part No.
Logan Part No.
Bowen No.
Bowen No.
Logan Part No.
Logan Part No.
Bowen No.
Bowen Part
No. No.
Logan
Logan
Part
Bowen No. No.
Bowen Part
No. No.
Logan
Logan No.
Part No.
Bowen
Bowen Part
No. No.
Logan
Logan No.
Part No.
Bowen
Bowen Part
No. No.
Logan
Logan No.
Part No.
Bowen
Bowen Part
No. No.
Logan
Logan No.
Part No.
Bowen
Bowen Part
No. No.
Logan
Logan No.
Part No.
Bowen
Bowen Part
No. No.
Logan
Bowen No.
52528
605-007
26000-043
52528
37415
26000-043
568-333
37415
568333
568-333
4
568333
568-235
4
568235
568-235
2
568235
568-233
2
568233
568-233
3
568233
568-224
3
568224
568-224
568-006
568224
568006
568-006
568-005
568006
568005
568-005
568-228
568005
568228
568-228
568228
2-3/8 EUE
3-3/4
2-3/8
1-7/8EUE
3-3/4
10-1/8
1-7/8
Sub
10-1/8
Mandrel
Sub
605-008
Mandrel
52497
605-008
26000-044
52497
20163
26000-044
568-333
20163
568333
568-333
4
568333
568-235
4
568235
568-235
2
568235
568-233
2
568233
568-233
3
568233
568-227
3
568227
568-227
568-006
568227
568006
568-006
568-005
568006
568005
568-005
568-229
568005
568229
568-229
568229
2-7/8 API IF
4-1/4
2-7/8
API IF
1-15/16
4-1/4
11-13/16
1-15/16
Integral
11-13/16
Mandrel
Integral
605-009
Mandrel
52502
605-009
26000-045
52502
44491
26000-045
568-337
44491
568337
568-337
4
568337
568-239
4
568239
568-239
2
568239
568-237
2
568237
568-237
3
568237
568-227
3
568227
568-227
568-006
568227
568006
568-006
568-005
568006
568005
568-005
568-231
568005
568231
568-231
568231
2-7/8 EUE
4-1/2
2-7/8
EUE
2-3/8
4-1/2
12-1/4
2-3/8
Integral
12-1/4
Mandrel
Integral
605-010
Mandrel
52653
605-010
26000-046
52653
35858
26000-046
568-339
35858
568339
568-339
4
568339
568-241
4
568241
568-241
2
568241
568-239
2
568239
568-239
3
568239
568-233
3
568233
568-233
568-006
568233
568006
568-006
568-005
568006
568005
568-005
568-233
568005
568233
568-233
568233
1-1/2
2 Integral
2-1/4
Integral
Integral
11-13/16
13-5/16
Mandrel
Mandrel
Integral
Integral
Integral
605-011
605-012
605-018
Mandrel
Mandrel
52530
52500
605-011
605-012
605-018
26000-047
26000-048
26000-048
52530
52500
25892
38120
38120
26000-047
26000-048
26000-048
568-337
568-338
568-338
25892
38120
38120
568337
568338
568338
568-337
568-338
568-338
4
4
4
568337
568338
568338
568-241
568-241
568-241
4
4
4
568241
568241
568241
568-241
568-241
568-241
2
2
2
568241
568241
568241
568-239
568-239
568-239
2
2
2
568239
568239
568239
568-239
568-239
568-239
3
3
3
568239
568239
568239
568-228
568-228
568-228
3
3
3
568228
568228
568228
568-228
568-228
568-228
568-006
568-006
568-006
568228
568228
568228
568006
568006
568006
568-006
568-006
568-006
568-006
568-006
568-006
568006
568006
568006
568006
568006
568006
568-006
568-006
568-006
568-231
568-232
568-232
568006
568006
568006
568231
568232
568232
568-231
568-232
568-232
568231
568232
568232
49842-A
49842-B
49842-C
49842-D
49842-A
49842-B
49842-C
49842-D
49842-A
49842-B
49842-C
49842-D
49842-A
49842-B
49842-C
1 Gallon
5 Gallons
20 Gallons 49842-D
55 Gallons
1 Gallon
5 Gallons
20 Gallons
55 Gallons
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Special Notes:
Special
Notes:
(1)
Packing
Sets include all seals necessary to dress the tool. Non-Extrusion Rings
(1) and
Packing
include
all seals
necessary
to and
dress
the tool.
Non-Extrusion
Rings
SealSets
Protector
Rings
are not
included,
must
be ordered
separately.
Recommended Spares:
andService
Seal Protector
are notSeal
included,
andTools
mustorbePiston
ordered
separately.
(2) Jar
Kit doesRings
not include
Setting
Ring
Pliers, which must
Recommended
Spares:
(1) 1 Jar Service
Kit
(2) be
Jarordered
Service separately.
Kit does not include Seal Setting Tools or Piston Ring Pliers, which must
(1)(2)
1 Jar
Service Kit
1
Washpipe
be ordered separately.
(2)(3)
1 Washpipe
2 Piston Assemblies
When ordering, please specify:
(3)(4)
2 Piston
Assemblies Rings
16 Non-Extrusion
When
ordering,
please
specify:
(1) Name and number of assembly or part
(4)(5)
1616
Non-Extrusion
Rings
Seal Protector
Rings
(1)
Name
and
number
of
assembly
or
part
(2) Connections, if other than standard
(5) 16 Seal Protector Rings
(6) 4 Mandrel Body Fill Plugs
(2) Connections, if other than standard
(3) Outside diameter, if other than standard
(6) 4 Mandrel Body Fill Plugs
(7) 4 Middle Body Fill Plugs
(3) Outside diameter, if other than standard
(7) 4 Middle Body Fill Plugs
(8) 8 Packing Sets
LEGAL NOTICE
(8) 8 Packing Sets
(9) 1 Mandrel Body Setting Tool
All references to Bowen part numbers in this literature are used to
(9) 1 Mandrel Body Setting Tool
(10) 1 Piston Setting Tool
identify interchangeable tools and parts. Reference to such tools and
(10) 1 Piston Setting Tool
(11) 1 Piston Ring Pliers
parts does not imply that Logan Oil Tools is a licensee or is in any
(11) 1 Piston Ring Pliers
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell,
offer toZsell,
National
Oilwell
Varco (Bowen)
products.
24 orLogan
Type
Hydraulic
Fishing
Jar
24 Logan Z Type Hydraulic Fishing Jar
LOGANZZTYPE
TYPEHYDRAULIC
HYDRAULIC
LOGAN
FISHING
Z TYPE
JAR HYDRAULIC FISHING JAR
LOGAN
FISHING
JAR
TOOLJOINT
JOINTCONNECTION
CONNECTION
TOOL
OUTSIDEDIAMETER
DIAMETER(INCHES)
(INCHES)
OUTSIDE
INSIDEDIAMETER
DIAMETER(INCHES)
(INCHES)
INSIDE
TOTALSTROKE
STROKE(INCHES)
(INCHES)
TOTAL
TYPEJAR
JAR
TYPE
TOOL JOINT
4-1/2API
API
CONNECTION
FH 4-1/2
4-1/2 API IF
4-1/2 6-5/8
API FH
API
4-1/2
7-5/8
IFAPI
Reg
4-1/2
FH
5-1/2 API Reg
API Reg
Reg API
7-5/8
API5-1/2
Reg API Reg
OUTSIDE
6-1/4
(INCHES)
6
7-3/4 & 88 6-1/4 &
99 6-1/2 6-3/4
66 DIAMETER 6-1/4
& 6-1/2 6-3/4
INSIDE22DIAMETER (INCHES)
2-1/4
2
3-1/16 2-1/4 3-3/4
2-1/4
2-3/8
3-3/4 2-3/8
TOTAL 11-7/16
STROKE
11-7/16 (INCHES)
14-3/8
14-11/16 11-7/16
14-3/8 14-3/813-13/16
14-3/8
13-13/1614-11/16
TYPE JAR
Integral
Integral
Integral Integral
Integral
Integral
Integral
Integral Integral
Integral Integral
Mandrel
Mandrel
Mandrel Mandrel
Mandrel
Mandrel
Mandrel
Mandrel
Mandrel
Mandrel Mandrel
Mandrel Mandrel
COMPLETEASSEMBLY
ASSEMBLY Logan
LoganPart
PartNo.
COMPLETE
No.
605-013
ASSEMBLY
605-014
Logan Part
605-015
No.
605-013
605-016
605-017
COMPLETE
605-013
605-014
605-015
605-016 605-014
605-017 605-015
BowenNo.
No.
52498
52544
Bowen No.52680
52680 5249852711
Bowen
52498
52544
52711 5254466346
66346 52680
TOPSUB
SUB
TOP
LoganPart
PartNo.
TOP
No. SUB
Logan Part
...No.
...
...
...
Logan
...
...
BowenNo.
No.
...
... Bowen No.......... ...
...
......
Bowen
...
...
...
MANDREL
LoganPart
PartNo.
MANDREL
No.
AG4013
AG4014
Logan Part
AG4015
No.
AG4013
AG4016
AG4017
AG4016
AG4017
MANDREL
Logan
AG4013
AG4014
AG4015
AG4016 AG4014
AG4017 AG4015
BowenNo.
No.
14715
12375
Bowen No.11131
11131
1471515156
15156
66352
Bowen
14715
12375
15156 1237566352
66352 11131
PISTON
ASSEMBLY
Logan
Part
PISTON
No.
26000-031
ASSEMBLY
26000-032
Logan
Part
26000-033
No.
26000-031
26000-034
26000-032
26000-035
26000-033
26000-034
26000-035
PISTON ASSEMBLY
Logan Part No.
26000-031
26000-032
26000-033
26000-034
26000-035
(RingType
TypeStandard)
Standard)
BowenNo.
No. (Ring Type
55246
Standard) 55212
55212
Bowen No.55335
55335 5524668924
68924
66355
(Ring
Bowen
55246
68924 5521266355
66355 55335
MANDRELBODY
BODY
LoganPart
PartNo.
MANDREL
No.
AG5013
BODY
AG5014
Logan Part
AG5015
No.
AG5013
AG5016
AG5017
AG5016
AG5017
MANDREL
Logan
AG5013
AG5014
AG5015
AG5016 AG5014
AG5017 AG5015
BowenNo.
No.
52834
52835
Bowen No.52836
52836 5283453088
53088
66354
Bowen
52834
52835
53088 5283566354
66354 52836
MIDDLEBODY
BODY
LoganPart
PartNo.
MIDDLE
No.
AG6013
BODY
AG6014
Logan Part
AG6015
No.
AG6013
AG6016
AG6017
AG6016
AG6017
MIDDLE
Logan
AG6013
AG6014
AG6015
AG6016 AG6014
AG6017 AG6015
Bowen
No.
14712
12372
Bowen
No.
11133
14712
15158
12372
66347
11133
15158
66347
Bowen No.
14712
12372
11133
15158
66347
WASHPIPEBODY
BODY
LoganPart
PartNo.
WASHPIPE
No.
AG7013
BODY
AG7014
Logan Part
AG7015
No.
AG7013
AG7016
AG7017
AG7016
AG7017
WASHPIPE
Logan
AG7013
AG7014
AG7015
AG7016 AG7014
AG7017 AG7015
Bowen
No.
14711
12371
Bowen
No.
701
14711
15164
12371
66350
701
15164
66350
Bowen No.
14711
12371
701
15164
66350
KNOCKER
Logan Part KNOCKER
No.
AG8013
AG8014
Logan PartAG8015
No.
AG8013
AG8016 AG8014
AG8017 AG8015
AG8016
AG8017
KNOCKER
Logan Part No.
AG8013
AG8014
AG8015
AG8016
AG8017
Bowen No.
14717
12377
Bowen No.11134
1471715159 1237766348 11134
15159
66348
Bowen No.
14717
12377
11134
15159
66348
WASHPIPE
Logan Part WASHPIPE
No.
AG9013
AG9014
Logan PartAG9015
No.
AG9013
AG9016 AG9014
AG9017 AG9015
AG9016
AG9017
WASHPIPE
Logan Part No.
AG9013
AG9014
AG9015
AG9016
AG9017
Bowen No.
14714
12374
Bowen No.704
1471415163 1237466349 704
15163
66349
Bowen No.
14714
12374
704
15163
66349
MANDREL BODY
Logan Part MANDREL
No.
AG10003
BODY
AG10003
Logan PartAG10003
No.
AG10003
AG10003AG10003
AG10003AG10003
AG10003
AG10003
MANDREL BODY
Logan Part No.
AG10003
AG10003
AG10003
AG10003
AG10003
FILL PLUG
Bowen No. FILL PLUG
508
508 Bowen No.508
508 508
508 508
508
508
508
FILL PLUG
Bowen No.
508
508
508
508
508
MIDDLE BODY
Logan Part MIDDLE
No.
AG10002
BODY
AG10002
Logan PartAG10002
No.
AG10002
AG10002AG10002
AG10002AG10002
AG10002
AG10002
MIDDLE BODY
Logan Part No.
AG10002
AG10002
AG10002
AG10002
AG10002
FILL PLUG
Bowen No. FILL PLUG
329
329 Bowen No.329
329 329
329 329
329
329
329
FILL PLUG
Bowen No.
329
329
329
329
329
PACKING SET
Logan Part PACKING
No.
26000-049
SET
26000-050
Logan Part26000-051
No.
26000-049
26000-052
26000-050
26000-053
26000-051
26000-052
26000-053
PACKING SET
Logan Part No.
26000-049
26000-050
26000-051
26000-052
26000-053
Bowen No.
14720
12383
Bowen No.9738
1472020980 1238366359 9738
20980
66359
Bowen No.
14720
12383
9738
20980
66359
MANDREL
Logan Part MANDREL
No.
L453
L365-48
L365-65 L365-50.75 L365-59
Logan PartL365-50.75
No.
L453 L365-59 L365-48
L365-65
MANDREL
Logan Part No.
L453
L365-48
L365-50.75 L365-59
L365-65
NON-EXTRUSION RING Bowen No. NON-EXTRUSION
453
365-48
RING
Bowen No.708
453 365-59 365-48365-65 708
365-59
365-65
NON-EXTRUSION RING Bowen No.
453
365-48
708
365-59
365-65
No. Reqd
8
8 No. Reqd 8
8
8
8
8
8
8
8
No. Reqd
8
8
8
8
8
MANDREL SEAL
Logan Part MANDREL
No.
L449
L375-48
L375-65 L375-50.75 L375-59
SEAL
Logan PartL375-50.75
No.
L449 L375-59 L375-48
L375-65
MANDREL SEAL
Logan Part No.
L449
L375-48
L375-50.75 L375-59
L375-65
375-59
375-65
PROTECTOR RING
Bowen No. PROTECTOR
449 RING 375-48
Bowen No.709
449 375-59 375-48375-65 709
PROTECTOR RING
Bowen No.
449
375-48
709
375-59
375-65
8
8
8
8
8
No. Reqd
8
8 No. Reqd 8
8
8
No. Reqd
8
8
8
8
8
MANDREL BODY
Logan Part MANDREL
No.
BODY
Logan PartNo.
MANDREL BODY
Logan Part No.
RING
...
...
...
NON-EXTRUSION RING Bowen No. NON-EXTRUSION
...
Bowen No....
...
NON-EXTRUSION RING Bowen No.
...
...
...
reserves
the right
to change
or discontinue designs without notice.
Logan Oil Tools reserves the right to Logan
changeOil
orTools
discontinue
designs
without
notice.
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Special Notes:
Special Notes:
Special
Notes:
(1) Packing
Sets
all seals necessary
(1) Packing Sets include all seals necessary
to dress
the include
tool. Non-Extrusion
Rings to dress the tool. Non-Extrusion Rings
(1) Packing
Sets
includeRings
all seals
necessary
to and
dress
the be
tool.
Non-Extrusion
Rings and must be ordered separately.
and
Sealmust
Protector
Ringsseparately.
are not included,
and Seal
Protector
are not
included,
ordered
Protector
Rings
are not Seal
included,
mustor
be
ordered
separately.
(2)
Jarand
Service
Kit
does
not
include
Setting
or Piston
Ring Pliers, which must be ordered separately.
(2)and
Jar Seal
Service
Kit does
not include
Setting
Tools
Piston
Ring
Pliers,Seal
which
must Tools
be ordered
separately.
(2) Jar Service Kit does not include Seal Setting Tools or Piston Ring Pliers, which must be ordered separately.
When ordering, please specify:
When ordering, please
specify:
Recommended
Spares:
When
ordering,
pleaseofspecify:
Spares:
(1) Name
and number
assembly or part
(1) Name and number Recommended
of(1)
assembly
or part
1 Jar Service
Kit
(1)
and number
of assembly
or part
11 Jar
Service Kit
(2)Name
Connections,
if other
than standard
(2) Connections, if other(1)
than
standard
(2)
Washpipe
(2)
if other
than standard
(2)
Washpipe
(3)Connections,
Outside diameter,
if other
than standard
(3) Outside diameter, if other
standard
(3) 12 than
Piston
Assemblies
(3) Outside diameter, if other than standard
(3)
Assemblies
(4) 216Piston
Non-Extrusion
Rings
(4)
Rings
LEGAL NOTICE
(5) 16
16 Non-Extrusion
Seal Protector Rings
(5)
16
Seal
Protector
Rings
4 Mandrel
Body Fill
Plugs
All references to Bowen part numbers in this literature are (6)
used
to
44 Mandrel
BodyFill
FillPlugs
Plugs
(7)
Middle
identify interchangeable tools and parts. Reference to such(6)
tools
and Body
48 Middle
(8)
PackingBody
SetsFill Plugs
parts does not imply that Logan Oil Tools is a licensee or is (7)
in any
(8)
Packing
(9) 81not
Mandrel Sets
Body Setting Tool
way affiliated with National Oilwell Varco. Logan Oil Tools does
(9) 11 Mandrel
Body Tool
Setting Tool
(10)
Piston
Setting
sell, or offer to sell, National Oilwell Varco (Bowen) products.
(10)
Tool
(11) 11 Piston
Piston Setting
Ring Pliers
(11) 1 Piston Ring Pliers
Recommended Spares:
(1) 1 Jar Service Kit
(2) 1 Washpipe
(3) 2 Piston Assemblies
(4) 16 Non-Extrusion Rings
(5) 16 Seal Protector Rings
(6) 4 Mandrel Body Fill Plugs
(7) 4 Middle Body Fill Plugs
(8) 8 Packing Sets
(9) 1 Mandrel Body Setting Tool
(10) 1 Piston Setting Tool
(11) 1 Piston Ring Pliers
LOGAN Z
Z TYPE
TYPE HYDRAULIC
HYDRAULICFISHING
FISHING
JAR
LOGANJAR
Z TYPE HYDRAULIC FISHING JAR
LOGAN
TOOL JOINT
JOINT CONNECTION
CONNECTION
TOOL
OUTSIDE DIAMETER
DIAMETER(INCHES)
(INCHES)
OUTSIDE
INSIDE
DIAMETER
(INCHES)
INSIDE DIAMETER (INCHES)
TOTAL STROKE
STROKE (INCHES)
(INCHES)
TOTAL
TYPE JAR
JAR
TYPE
4-1/2JOINT
APIFH
FHCONNECTION
4-1/2API
APIIFIF 5-1/2
5-1/2API
APIReg
Reg 6-5/8
6-5/8
APIReg
Reg
7-5/8
API
Reg
TOOL
4-1/2
FH 7-5/8
4-1/2
API
IF
4-1/2
API
4-1/2
API
API
Reg
6-1/4&(INCHES)
&6-1/2
6-1/2 6-3/4
6-3/4
7-3/4
9
OUTSIDE
DIAMETER
6 &&8 8
& 6-1/2
66
6-1/4
7-3/4
96-1/4
2-1/4
2-3/8
3-1/16
3-3/4
INSIDE
DIAMETER
(INCHES) 2-3/8
2
2-1/4
22
2-1/4
3-1/16
3-3/4
11-7/16
14-3/8
14-11/16
14-3/8
13-13/16
TOTAL
STROKE14-3/8
(INCHES) 14-11/16
11-7/16
14-3/8
11-7/16
14-3/8
13-13/16
Integral
Integral
Integral
Integral
Integral
TYPE
JAR
Integral
Integral
Integral
Integral
Integral
Integral
Mandrel
Mandrel
Mandrel
Mandrel
Mandrel
Mandrel
Mandrel
Mandrel
Mandrel
Mandrel
Mandrel
COMPLETE ASSEMBLY
ASSEMBLY Logan
LoganPart
PartNo.
No. COMPLETE
605-013 ASSEMBLY
605-014 Logan
605-015
605-016
605-017
Part No. 605-016
605-013
605-014
COMPLETE
605-013
605-014
605-015
605-017
BowenNo.
No.
52498
52544
52680
52711
66346
Bowen
No.
52498
52544
Bowen
52498
52544
52680
52711
66346
MANDREL
BODY
Logan
Part
No.
MANDREL
BODY
Logan
Part
No.
MANDREL BODY
Logan Part No.
INSERT
BowenNo.
No.
...
INSERT
Bowen
INSERT
Bowen
...... No.
...
MANDREL BODY
BODYSEAL
SEAL Logan
LoganPart
PartNo.
No. MANDREL
SEAL Logan
BODY
MANDREL
Part No.
PROTECTOR RING
RING
BowenNo.
No.
PROTECTOR
RING
Bowen
PROTECTOR
Bowen
No.
RING TYPE
TYPE
LoganPart
PartNo.
No. RING
26000-031
26000-032Logan
26000-033
26000-034
26000-035
TYPE
Part No. 26000-034
26000-031 26000-035
26000-032
RING
Logan
26000-031
26000-032
26000-033
PISTON ASSEMBLY
ASSEMBLY
BowenNo.
No.
55246 ASSEMBLY
55212
55335
68924
66355
PISTON
Bowen
No.
55246
55212
PISTON
Bowen
55246
55212
55335
68924
66355
Consists of:
of:
Consists of:
Consists
PISTON
LoganPart
PartNo.
No. PISTON
AG15013
AG15014Logan
AG15015
AG15016
AG15017
Part No. AG15016
AG15013
AG15014
PISTON
Logan
AG15013
AG15014
AG15015
AG15017
BowenNo.
No.
55247
55213
55339
68925
66357
Bowen
No.
55247
55213
Bowen
55247
55213
55339
68925
66357
WAVE SPRING
SPRING
LoganPart
PartNo.
No. WAVE
SPRING
Logan
WAVE
Logan
Part No.
No.Reqd
Reqd
No.
Reqd
No.
PISTON RING
RING
LoganPart
PartNo.
No. PISTON
L1999 RING L12379
L12379 Logan
L719
L15162
L66356
Part No. L15162
L1999
L12379
PISTON
Logan
L1999
L719
L66356
BowenNo.
No.
1999
12379
719
15162
66356
Bowen
No.
1999
12379
Bowen
1999
12379
719
15162
66356
No.Reqd
Reqd
2
No. 2Reqd
No.
11
22
4 41
525
SEAL
LoganPart
PartNo.
No. SEAL
568-236
568-237 Logan
568-239
568-426
568-430
SEAL
Logan
568-236
568-237
568-239
568-430
Part No. 568-426
568-236
568-237
Bowen
568236
568237
568239
568426
568430
BowenNo.
No.
568236
568237 Bowen
568239
568426
568430
No.
568236
568237
NON-EXTRUSION
L370-13.75
L370-17
NON-EXTRUSIONRING
RING Logan
LoganPart
PartNo.
No. NON-EXTRUSION
L370-13.75 L370-15
L370-15
L370-17
L365-53
L365-57
RING Logan
Part No. L365-53
L370-13.75 L365-57
L370-15
Bowen
370-13.75
370-15
370-17
365-53
365-57
BowenNo.
No.
370-13.75
370-15 Bowen
370-17
365-53
365-57
No.
370-13.75
370-15
SEAL
Logan
L376-13.75
L376-15
L376-17
SEAL PROTECTOR
PROTECTOR
LoganPart
PartNo.
No. SEAL
L376-13.75
L376-15 Logan
L376-17
L375-53
L375-57
PROTECTOR
Part No. L375-53
L376-13.75 L375-57
L376-15
RING
Bowen
376-13.75
376-15
376-17
375-53
375-57
RING
BowenNo.
No.
376-13.75
376-15 Bowen
376-17
375-53
375-57
RING
No.
376-13.75
376-15
CONE
Logan
Part No.
CONE TYPE
TYPE
LoganPart
PartNo.
No. CONE
TYPE
Logan
PISTON
Bowen
No.
PISTON ASSEMBLY
ASSEMBLY
BowenNo.
No.
PISTON
ASSEMBLY
Bowen
Consists
Consists of:
of:
Consists of:
CONE
Logan
Part No.
CONE
LoganPart
PartNo.
No. CONE
Logan
Bowen
......
No.
......
...
BowenNo.
No.
Bowen
BY-PASS
Logan
Part No.
BY-PASS BODY
BODY
LoganPart
PartNo.
No. BY-PASS
BODY
Logan
Bowen
......
No.
......
...
BowenNo.
No.
Bowen
SEAL
Logan
Part No.
SEAL BODY
BODY
LoganPart
PartNo.
No. SEAL
BODY
Logan
Bowen
No.
...
...
...
No.
...
Bowen No.
...
Bowen
SEAL
Logan
Part No.
SEAL BODY
BODY SEAL
SEAL
LoganPart
PartNo.
No. SEAL
BODY SEAL
Logan
Bowen
......
No.
......
...
BowenNo.
No.
Bowen
...
26000-033
55335
26000-034
68924
...
26000-035
66355
AG15015
55339
L719
719
2
568-239
568239
L370-17
370-17
L376-17
376-17
AG15016
68925
L15162
15162
4
568-426
568426
L365-53
365-53
L375-53
375-53
AG15017
66357
L66356
66356
5
568-430
568430
L365-57
365-57
L375-57
375-57
...
...
...
...
Logan
or
designs
without
Logan Oil
Oil Tools
Tools reserves
reservesthe
theright
rightto
tochange
change
ordiscontinue
discontinue
designsthe
without
notice.
Logan
Oil Tools reserves
rightnotice.
to
change or discontinue designs without notice.
Special
Special Notes:
Notes:
Special Notes:
(1)
dress
the
Rings
(1) Packing
Packing Sets
Sets include
includeall
allseals
sealsnecessary
necessarytoto
dress
thetool.
tool.Non-Extrusion
Non-Extrusion
Rings
(1)
Packing
Sets
include all seals
necessary to dress the tool. Non-Extrusion Rings
and
must
be
ordered
and Seal
Seal Protector
ProtectorRings
Ringsare
arenot
notincluded,
included,and
and
must
beProtector
orderedseparately.
separately.
and
Seal
Rings
are not included, and must be ordered separately.
(2)
ororPiston
which
must
bebeordered
(2) Jar
Jar Service
Service Kit
Kitdoes
doesnot
notinclude
includeSeal
SealSetting
Setting
Tools
Piston
RingPliers,
Pliers,
which
must
ordered
separately.
(2)Tools
Jar
Service
KitRing
does
not
include
Seal
Setting
Toolsseparately.
or
Piston Ring Pliers, which must be ordered separately.
When
When ordering,
ordering, please
pleasespecify:
specify:
(1)
Name
and
number
(1) Name and numberof
ofassembly
assemblyor
orpart
part
(2)
(2) Connections,
Connections, ififother
otherthan
thanstandard
standard
(3)
(3) Outside
Outside diameter,
diameter,ififother
otherthan
thanstandard
standard
When ordering,Recommended
please specify:Spares:
Recommended
Spares:
(1)
Service
(1) Name and number
of
assembly
or part
(1)11Jar
Jar
ServiceKit
Kit
11Washpipe
(2) Connections, (2)
if(2)
other
than standard
Washpipe
(3)
(3) Outside diameter,
other Assemblies
than
standard
(3)22ifPiston
Piston
Assemblies
(4)
(4)16
16Non-Extrusion
Non-ExtrusionRings
Rings
(5)
LEGAL NOTICE
(5)16
16Seal
SealProtector
ProtectorRings
Rings
4 Mandrel Body Fill Plugs
All references to Bowen part numbers in this literature are (6)
used
(6) 4to
Mandrel Body Fill Plugs
(7) 4 Middle Body Fill Plugs
(7) 4 and
Middle Body Fill Plugs
identify interchangeable tools and parts. Reference to such tools
(8) 8 Packing Sets
8 Packing
Sets
parts does not imply that Logan Oil Tools is a licensee or is in(8)
any
way
(9) 1 Mandrel Body Setting Tool
(9)sell,
1 Mandrel
Body Setting Tool
affiliated with National Oilwell Varco. Logan Oil Tools does not
or
(10) 1 Piston Setting Tool
(10) 1 Piston Setting Tool
offer to sell, National Oilwell Varco (Bowen) products.
(11) 1 Piston Ring Pliers
(11) 1 Piston Ring Pliers
Recommended Spares:
(1) 1 Jar Service Kit
(2) 1 Washpipe
(3) 2 Piston Assemblies
(4) 16 Non-Extrusion Rings
(5) 16 Seal Protector Rings
(6) 4 Mandrel Body Fill Plugs
(7) 4 Middle Body Fill Plugs
(8) 8 Packing Sets
(9) 1 Mandrel Body Setting Tool
(10) 1 Piston Setting Tool
(11) 1 Piston Ring Pliers
4-1/2
APIFH
FH 4-1/2
4-1/2API
APIIFIF 5-1/2
5-1/2API
API
Reg
6-5/8API
APIReg
Reg
APIReg
Reg
TOOL JOINT
CONNECTION
4-1/2
API6-5/8
FH
4-1/2
API 7-5/8
IF7-5/8API
5-1/2
API Reg
4-1/2
API
Reg
OUTSIDE DIAMETER
(INCHES)
6-1/4&&6-1/2
6-1/2 6-3/4
6-3/4 6
7-3/4&6-1/4
&88 & 6-1/2
66
6-1/4
7-3/4
9 9 6-3/4
INSIDE DIAMETER
(INCHES)
2-1/4
2-1/4
2-3/8 2
3-1/16
3-3/42-3/8
22
2-1/4
2-3/8
3-1/16
3-3/4
TOTAL STROKE
(INCHES)
11-7/16 14-3/8
14-3/8 13-13/16
14-11/16
11-7/16
14-3/8
14-11/16
14-3/8
13-13/16
11-7/16
14-3/8
14-11/16
TYPE JAR Integral
Integral Integral
Integral Integral
Integral
Integral
Integral
Integral
Integral
Integral
Integral
Integral
Mandrel Mandrel
Mandrel Mandrel
Mandrel
Mandrel
Mandrel
Mandrel
Mandrel
Mandrel
Mandrel
Mandrel
Mandrel
COMPLETE
ASSEMBLY 605-014
Logan Part No.
605-013 605-016
605-014 605-017
605-015
COMPLETE
Logan Part
Part
No.
605-013
605-014
605-015
605-016
605-017
COMPLETE ASSEMBLY Logan
No.
605-013
605-015
Bowen No. 52680
52680
Bowen
52498
52544
Bowen No.
No.
52498
52544
5268052498 52711
5271152544 66346
66346
OPTIONAL
OPTIONAL
OPTIONAL
MANDREL
BODY
Logan Part No.
AG1001 AG1000-59
AG1000-48
AG1000-51 AG1000-59
AG1000-65
Logan
No.
AG1001
AG1000-48
AG1000-51
AG1000-65
Logan Part
Part
No.
AG1001
AG1000-48
AG1000-51
AG1000-59
AG1000-65
SETTING TOOL
Bowen No. 22709-51
448
22709-4822709-65
22709-51
22709-59
22709-65
Bowen
448
22709-48
22709-59
Bowen No.
No.
448
22709-48
22709-51
22709-59
22709-65
PISTON
SETTING
TOOL
Logan
Part
No.
AG1000-41.75AG2001
AG1000-45
AG1000-53
AG1000-57
Logan
Part
No.
AG1000-41.75AG2001
AG1000-45
AG1000-53
AG1000-57
Logan Part No.
AG1000-41.75AG2001
AG1000-45 AG1000-53
AG1000-57
Bowen No. 22709-45
22709-41.75
54309 22709-57
22709-45
22709-53
22709-57
Bowen
22709-41.75
22709-53
Bowen No.
No.
22709-41.75 54309
54309
22709-45
22709-53
22709-57
PISTON
PLIERS 26000-055
Logan Part No.
26000-055
26000-055
26000-055
26000-055
26000-055
PISTON RING PLIERS
Logan
No.
26000-055
26000-055
26000-055
26000-055
PISTON
Logan Part
Part
No. RING
26000-055
26000-055
26000-055
26000-055
26000-055
Bowen No.
Bowen
Bowen No.
No.
JAR
SERVICE
KIT
Logan Part No.
26000-055
26000-055
26000-055
26000-055
26000-055
JAR SERVICE
SERVICE KIT
KIT
Logan
No.
26000-055
26000-055
26000-055
26000-055
26000-055
JAR
Logan Part
Part
No.
26000-055
26000-055
26000-055
26000-055
26000-055
Bowen
No.
55403
55403
55403
55403
55403
Bowen
No.
55403
55403
55403
55403
55403
Bowen No.
55403
55403
55403
55403
55403
HI-TEMPERATURE
Logan Part No.
26000-085
26000-086
26000-088
HI-TEMPERATURE
Logan
No.
26000-085
26000-086
26000-087
26000-088
26000-087
HI-TEMPERATURE
Logan Part
Part
No.
26000-085
26000-086
26000-087
26000-088
PACKING SET
Bowen No. 9738/006
148246 20980/006
79015 9738/006
20980/006
PACKING SET
SET
Bowen
148246
79015
PACKING
Bowen No.
No.
148246
79015
9738/006
20980/006
& 007
&&147932
&&007
147932
007& 147932
PACKING
SET
Logan Part No.
26000-049
26000-050
26000-051
26000-052
26000-053
PACKING SET
SET
Logan
No.
26000-049
26000-050
26000-051
26000-052
26000-053
PACKING
Logan Part
Part
No.
26000-049
26000-050
26000-051
26000-052
26000-053
Consists
of:
Bowen
No.
14720
12383
9738
20980
66359
Consists
of:
Bowen
No.
14720
12383
9738
20980
66359
Consists of:
Bowen No.
14720
12383
9738
20980
66359
MANDREL
/
Logan Part No.
568-344 568-432
568-345 568-438
568-348
568-432
568-438
MANDREL //
Logan
No.
568-344
568-345
568-348
MANDREL
Logan Part
Part
No.
568-344
568-345
568-348
568-432
568-438
WASHPIPE568344
SEAL
Bowen No. 568348
568344 568432
568345 568438
568348
568432
568438
WASHPIPE
SEAL
Bowen
No.
568345
WASHPIPE SEAL
Bowen No.
568344
568345
568348
568432
568438
4
4
4
4
No.
44
44No. Reqd
44
44
44 4
No. Reqd
Reqd
LARGE MIDDLE
Logan Part No.
568-248 568-261
568-252 568-265
568-256
568-261
568-265
LARGE MIDDLE
MIDDLE
Logan
568-248
568-252
568-256
LARGE
Logan Part
Part No.
No.
568-248
568-252
568-256
568-261
568-265
BODY SEAL
Bowen No. 568256
568248 568261
568252 568265
568256
568261
568265
BODY
SEAL
Bowen
No.
568248
568252
BODY SEAL
Bowen No.
568248
568252
568256
568261
568265
2
2
2
2
No.
22
22No. Reqd
22
22
22 2
No. Reqd
Reqd
SMALL
MIDDLE
Logan Part No.
568-246 568-259
568-250
568-254
568-259
SMALL
MIDDLE
Logan
Part
No.
568-246
568-250
568-254
SMALL MIDDLE
Logan Part No.
568-246
568-250
568-254
568-259
BODY SEAL
Bowen No. 568254
568246 568259
568250
568254
568259
BODY SEAL
Bowen No.
568246
568250
BODY SEAL
Bowen No.
568246
568250
568254
568259
3
3
3
3
3
No. Reqd
3
3No. Reqd
3
3
3
No. Reqd
3
3
3
3
3
WASHPIPE
SEAL
Logan Part No.
568-234 568-242
568-235 568-246
568-235
568-242
568-246
WASHPIPE SEAL
Logan Part
No.
568-234
568-235
568-235
WASHPIPE SEAL
Logan Part No.
568-234
568-235
568-235
568-242
568-246
Bowen No. 568235
568234 568242
568235 568246
568235
568242
568246
Bowen No.
568234
568235
Bowen No.
568234
568235
568235
568242
568246
MANDREL
BODY
Logan Part No.
568-011 568-011
568-011 568-011
568-011
568-011
568-011
MANDREL BODY
Logan Part
No.
568-011
568-011
568-011
MANDREL BODY
Logan Part No.
568-011
568-011
568-011
568-011
568-011
FILL PLUG568011
SEAL
Bowen No. 568011568011 568011568011 568011
568011
568011
568011
FILL PLUG SEAL
Bowen No.
568011
Bowen No.
568011
568011
568011
568011
568011
FILL PLUG SEAL
MIDDLE
Logan Part No.
568-006 568-006
568-006 568-011
568-006
568-006
568-011
MIDDLE BODY
Logan Part
No. BODY
568-006
568-006
568-006
MIDDLE BODY
Logan Part No.
568-006
568-006
568-006
568-006
568-011
FILL PLUG568006
SEAL
Bowen No. 568006
568006 568006
568006 568011
568006
568006
568011
FILL PLUG SEAL
Bowen No.
568006
FILL PLUG SEAL
Bowen No.
568006
568006
568006
568006
568011
PISTON
Logan Part No.
568-236 568-426
568-237 568-430
568-239
568-426
568-430
PISTON SEAL
Logan Part
No. SEAL
568-236
568-237
568-239
PISTON SEAL
Logan Part No.
568-236
568-237
568-239
568-426
568-430
Bowen No. 568239
568236 568426
568237 568430
568239
568426
568430
Bowen No.
568236
568237
Bowen No.
568236
568237
568239
568426
568430
Logan
Oil
Tools
reserves
the
right
to
change
or
discontinue
designs
without
notice.
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Special Notes:
Special Notes:
Special Notes:
(1) Packing
Sets the
include
seals necessary
to dress the tool. Non-Extrusion Rings
(1) Packing Sets include all seals necessary
to dress
tool.all
Non-Extrusion
Rings
(1) Packing Sets include all seals necessary
to dress
the tool. Non-Extrusion
Ringsand must be ordered separately.
and Seal
areseparately.
not included,
and Seal Protector Rings are not included,
andProtector
must beRings
ordered
and Seal Protector Rings are not(2)
included,
and must
be ordered
separately.
Jar
Service
Kit or
does
not Ring
include
Sealwhich
Setting
Tools
Piston separately.
Ring Pliers, which must be ordered separately.
(2) Jar Service Kit does not include Seal
Setting
Tools
Piston
Pliers,
must
beor
ordered
(2) Jar Service Kit does not include Seal Setting Tools or Piston Ring Pliers, which must be ordered separately.
MANDREL BODY
MANDREL
SETTING TOOL
SETTING
PISTON SETTING TOOL
PISTON
Recommended Spares:
When ordering, please specify: When ordering, please specify:
Recommended Spares:
When ordering, please specify: (1) Name and number of assembly
Recommended
part Spares:
(1) 1 Jar Service Kit
(1) Name and number of assembly or part
(1) 1 JarorService
Kit
(1) Name and number of assembly or
(1) 1 Jar Service Kit
(2)part
Connections, if other than
(2) 1 Washpipe
(2) Connections, if other than standard
(2)standard
1 Washpipe
(2)
Connections, if other than standard
(2)21Piston
Washpipe
(3) Outside diameter, if other
standard
(3) 2 Piston Assemblies
(3) Outside diameter, if other than standard
(3)than
Assemblies
(3) Outside diameter, if other than standard
(3)16
2 Piston
Assemblies
(4) 16 Non-Extrusion Rings
(4)
Non-Extrusion
Rings
LEGAL NOTICE
(4)16
16Seal
Non-Extrusion
Rings
(5) 16 Seal Protector Rings
(5)
Protector Rings
All references to Bowen part numbers in this literature are (6)
used
toSeal Protector
(5)416
(6) 4 Mandrel Body Fill Plugs
Mandrel
Body FillRings
Plugs
(6)
Mandrel
Body
Plugs
identify interchangeable tools and parts. Reference to such(7)
tools
and Body
(7) 4 Middle Body Fill Plugs
44Middle
FillFill
Plugs
(7)any
Middle Body
parts does not imply that Logan Oil Tools is a licensee or is(8)
in
(8) 8 Packing Sets
84Packing
Sets Fill Plugs
(8)18not
PackingBody
Sets Setting Tool
way affiliated with National Oilwell Varco. Logan Oil Tools does
(9) 1 Mandrel Body Setting Tool
(9)
Mandrel
(9)11Piston
Mandrel
BodyTool
Setting Tool (10) 1 Piston Setting Tool
sell, or offer to sell, National Oilwell Varco (Bowen) products.
(10)
Setting
(10)11Piston
PistonRing
Setting
Tool
(11) 1 Piston Ring Pliers
(11)
Pliers
(11)
1
Piston
Ring
Pliers
Bowen is a registered trademark of National Oilwell Varco.
Logan
Hydraulic Fis
Logan Z Type Hydraulic Fishing
Jar Z
Type
27
Logan Z Type Hydraulic Fishing Jar 27
Manual D430 Z Type Hydraulic Fishing Jars Page 27
4-1/2 API FH
6
2
11-7/16
Integral
Mandrel
605-013
52498
4-1/2 API IF
6-1/4 & 6-1/2
2-1/4
14-3/8
Integral
Mandrel
605-014
52544
568-441
568441
568-263
568263
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Special Notes:
(1) Packing Sets include all seals necessary to dress the tool. Non-Extrusion Rings
and Seal Protector Rings are not included, and must be ordered separately.
(2) Jar Service Kit does not include Seal Setting Tools or Piston Ring Pliers, which must be ordered separately.
When ordering, please specify:
(1) Name and number of assembly or part
(2) Connections, if other than standard
(3) Outside diameter, if other than standard
Recommended Spares:
(1) 1 Jar Service Kit
(2) 1 Washpipe
(3) 2 Piston Assemblies
(4) 16 Non-Extrusion Rings
(5) 16 Seal Protector Rings
(6) 4 Mandrel Body Fill Plugs
(7) 4 Middle Body Fill Plugs
(8) 8 Packing Sets
(9) 1 Mandrel Body Setting Tool
(10) 1 Piston Setting Tool
(11) 1 Piston Ring Pliers
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
7/8
1-13/16
1-1/4
2-3/8 PH6
7/8
1-1/4
2-3/8
PH6Bx
Sucker Rod 1-13/16
Wilson FJ
API Reg
5.9# Hyd
Sucker
Rod
Wilson
FJ
API
Reg
5.9#
Hyd
OUTSIDE
DIAMETER (INCHES)
1-13/16
2-1/4
2-29/32 Bx
RECOMMENDED
TEST LOADS 1-5/8
OUTSIDE
DIAMETER
(INCHES)
1-5/8
1-13/16
2-1/4
2-29/32
INSIDE DIAMETER
(INCHES)
1/4
5/16
3/8
1
TOOL JOINT
CONNECTION
7/8
1-13/16
1-1/4
2-3/8
PH6
INSIDE
DIAMETER
(INCHES)
1/4
5/16
3/8
1
STROKE LENGTH (INCHES)
7-1/16
7
6-15/16
11-7/16
Sucker
Rod Wilson
FJ
API
Reg
5.9#
Hyd Bx
STROKE
7-1/16
7
6-15/16
11-7/16
JAR TYPELENGTH (INCHES)
Sub
Special
Integral
Sub
OUTSIDE
1-5/8
1-13/16
2-1/4
2-29/32
JAR
TYPEDIAMETER (INCHES)
Sub
Special
Integral
Sub
Mandrel
INSIDE DIAMETER (INCHES)
1/4
5/16
3/8
1
Mandrel
COMPLETE ASSEMBLY Logan Part No.
605-000
605-001
605-002
605-003
STROKE LENGTH
(INCHES)
7-1/16
7605-001
6-15/16
11-7/16
COMPLETE
ASSEMBLY
Logan Part
605-000
605-002
605-003
Bowen
No. No.
70822
74723
54020
68010
JAR TYPE
Sub
Special
Integral
Sub
Bowen No.
70822
74723
54020
68010
LOW PULL LOAD (LBS)
4,000
4,000
4,000
6,000
Mandrel
LOW
PULL
LOAD
(LBS)
4,000
4,000
4,000
6,000
MAX.
ALLOWABLE
LOAD
(LBS)
15,400
18,000
21,000
35,400
COMPLETE ASSEMBLY Logan Part No.
605-000
605-001
605-002
605-003
MAX.
ALLOWABLE
LOAD
(LBS)
15,400
18,000
21,000
35,400
TESTING PULL LOAD (LBS)
* No.
5,000
6,000
7,200
12,600
Bowen
70822
74723
54020
68010
TESTING PULL LOAD (LBS) *
5,000
6,000
7,200
12,600
8,500
10,000
12,000
19,000
LOW PULL LOAD (LBS)
4,000
4,000
4,000
6,000
8,500
10,000
12,000
19,000
MAX. ALLOWABLE LOAD (LBS)
15,400
18,000
21,000
35,400
TESTING PULL LOAD (LBS) *
5,000
6,000
7,200
12,600
8,500
10,000
12,000
19,000
TOOL JOINT CONNECTION
2-3/8
2-3/8
2-7/8
2-7/8
TOOL JOINT CONNECTION
2-3/8
2-3/8
2-7/8
2-7/8
API IF
EUE
API IF
EUE
API
IF
EUE
API
IF
EUE
OUTSIDE DIAMETER (INCHES)
3-3/4
3-3/4
4-1/4
4-1/2
OUTSIDE
DIAMETER
(INCHES)
3-3/4
3-3/4
4-1/4
4-1/2
INSIDE
DIAMETER
(INCHES)
1-1/2
1-7/8
1-15/16
2-3/8
TOOL JOINT
CONNECTION
2-3/8
2-3/8
2-7/8
2-7/8
INSIDE
DIAMETER
(INCHES)
1-1/2
1-7/8
1-15/16
2-3/8
STROKE
LENGTH (INCHES)
12-1/8
10-1/8
11-13/16
12-1/4
API
IF
EUE
API
IF
EUE
STROKE
LENGTH
(INCHES)
12-1/8
10-1/8
11-13/16
12-1/4
TYPE JAR
Sub
Sub
Integral
Integral
OUTSIDE
3-3/4
3-3/4
4-1/4
4-1/2
TYPE
JARDIAMETER (INCHES)
Sub
Sub
Integral
Integral
Mandrel
Mandrel
INSIDE DIAMETER (INCHES)
1-1/2
1-7/8
1-15/16
2-3/8
Mandrel
Mandrel
COMPLETE ASSEMBLY Logan Part No.
605-007
605-008
605-009
605-010
STROKE LENGTH
(INCHES)
12-1/8
10-1/8
11-13/16
12-1/4
COMPLETE
ASSEMBLY
Logan Part
605-007
605-008
605-009
605-010
Bowen
No. No.
52528
52497
52502
52653
TYPE JAR
Sub
Sub
Integral
Integral
Bowen No.
52528
52497
52502
52653
LOW PULL LOAD (LBS)
8,000
8,000
8,000
8,000
Mandrel
Mandrel
LOW PULL
LOAD (LBS)
8,000
8,000
8,000
8,000
MAX.
ALLOWABLE
LOADLogan
(LBS) Part No.
46,000
46,500
46,700
49,000
COMPLETE
ASSEMBLY
605-007
605-008
605-009
605-010
MAX.
ALLOWABLE
LOAD
(LBS)
46,000
46,500
46,700
49,000
TESTING PULL LOAD (LBS)
* No.
15,000
15,000
18,000
18,000
Bowen
52528
52497
52502
52653
TESTING PULL LOAD (LBS) *
15,000
15,000
18,000
18,000
26,000
26,000
28,000
28,000
LOW PULL LOAD (LBS)
8,000
8,000
8,000
8,000
26,000
26,000
28,000
28,000
MAX. ALLOWABLE LOAD (LBS)
46,000
46,500
46,700
49,000
TESTING PULL LOAD (LBS) *
15,000
15,000
18,000
18,000
26,000
26,000
28,000
28,000
TOOL JOINT CONNECTION
4-1/2
4-1/2
5-1/2
6-5/8
TOOL JOINT CONNECTION
4-1/2
4-1/2
5-1/2
6-5/8Reg
API FH
API IF
API Reg
API
API
FH
API
IF
API
Reg
API
OUTSIDE DIAMETER (INCHES)
6
6-1/4 & 6-1/2 6-3/4
7-3/4Reg
&8
OUTSIDE
DIAMETER
(INCHES)
6
6-1/4 & 6-1/2 2-3/8
6-3/4
7-3/4 & 8
INSIDE
DIAMETER
(INCHES)
2
2-1/4
3-1/16
TOOL JOINT CONNECTION
4-1/2
4-1/2
5-1/2
6-5/8
INSIDE
DIAMETER
(INCHES)
2
2-1/4
2-3/8
3-1/16
STROKE
LENGTH(INCHES)
11-7/16
14-3/8
14-11/16
14-3/8
API
FH
API
IF
API
Reg
API
Reg
STROKE
LENGTH(INCHES)
11-7/16
14-3/8
14-11/16
14-3/8
TYPE
JARDIAMETER (INCHES)
Integral
Integral
Integral
Integral
OUTSIDE
6
6-1/4
& 6-1/2 6-3/4
7-3/4
&8
TYPE JAR
Integral
Integral
Integral
Integral
Mandrel
Mandrel
Mandrel
Mandrel
INSIDE DIAMETER (INCHES)
2
2-1/4
2-3/8
3-1/16
Mandrel
Mandrel
Mandrel
Mandrel
COMPLETE
ASSEMBLY Logan Part No.
605-013
605-014
605-015
605-016
STROKE LENGTH(INCHES)
11-7/16
14-3/8
14-11/16
14-3/8
COMPLETE ASSEMBLY Bowen
Logan Part
No.
605-013
605-014
605-015
605-016
No.
52498
52544
52680
52711
TYPE JAR
Integral
Integral
Integral
Integral
Bowen No.
52498
52544
52680
52711
12,000
12,000
LOW PULL LOAD (LBS)
10,000
12,000
Mandrel
Mandrel
Mandrel
Mandrel
LOW
PULL
LOAD
(LBS)
10,000
12,000
12,000
12,000
MAX.
ALLOWABLE
LOADLogan
(LBS) Part No.
136,400
159,000
172,800
149,000
COMPLETE
ASSEMBLY
605-013
605-014
605-015
605-016
MAX. ALLOWABLE
LOAD
(LBS)
136,400
159,000
172,800
149,000
TESTING
PULL LOAD
(LBS)
* No.
41,000
55,000
62,000
63,000
Bowen
52498
52544
52680
52711
TESTING PULL LOAD (LBS) *
41,000
55,000
62,000
63,000
62,000
80,000
110,000
100,000
LOW PULL LOAD (LBS)
10,000
12,000
12,000
12,000
62,000
80,000
110,000
100,000
MAX. ALLOWABLE LOAD (LBS)
136,400
159,000
172,800
149,000
*TESTING
Figures are
based
on
a
Jar
Tester
speed
of
2-1/2
feet
per
minute.
PULL LOAD (LBS) *
41,000
55,000
62,000
63,000
* Full
Figures
are approximately
based on a Jar6-1/2
Tester
speed
of 2-1/2isfeet
per minute.
speed,
feet
per minute,
needed
to80,000
reach maximum
allowable load.
62,000
110,000
100,000
Full speed, approximately 6-1/2 feet per minute, is needed to reach maximum allowable load.
2-3/8
2-3/8
EUE
EUE
3-1/16
3-1/16
1-1/2
2-3/8
1-1/2
11-9/16
EUE
11-9/16
Sub
3-1/16
Sub
1-1/2
605-004
11-9/16
605-004
55670
Sub
55670
6,000
6,000
27,800
605-004
27,800
12,000
55670
12,000
16,000
6,000
16,000
27,800
12,000
16,000
3-1/2
3-1/2FH
API
API FH
4-3/4
4-3/4
1-1/2
3-1/2
1-1/2
11-13/16
API
FH
11-13/16
Integral
4-3/4
Integral
Mandrel
1-1/2
Mandrel
605-011
11-13/16
605-011
52530
Integral
52530
10,000
Mandrel
10,000
85,000
605-011
85,000
28,000
52530
28,000
45,000
10,000
45,000
85,000
28,000
45,000
7-5/8
7-5/8Reg
API
API
9 Reg
9
3-3/4
7-5/8
3-3/4
13-13/16
API Reg
13-13/16
9Integral
Integral
Mandrel
3-3/4
Mandrel
605-017
13-13/16
605-017
66346
Integral
66346
14,000
Mandrel
14,000
214,000
605-017
214,000
80,000
66346
80,000
120,000
14,000
120,000
214,000
80,000
120,000
2-3/8
2-3/8
API Reg
API
3-1/8Reg
3-1/8
1
2-3/8
1
11-13/16
API
Reg
11-13/16
Integral
3-1/8
Integral
Mandrel
1Mandrel
605-005
11-13/16
605-005
52504
Integral
52504
7,000
Mandrel
7,000
32,400
605-005
32,400
15,000
52504
15,000
23,000
7,000
23,000
32,400
15,000
23,000
3-1/2
3-1/2IF
API
API IF
4-3/4
4-3/4
2
3-1/2
2
13-5/16
API
IF
13-5/16
Integral
4-3/4
Integral
Mandrel
2Mandrel
605-012
13-5/16
605-012
52500
Integral
52500
10,000
Mandrel
10,000
74,500
605-012
74,500
28,000
52500
28,000
45,000
10,000
45,000
74,500
28,000
45,000
2-7/8
2-7/8
API Reg
API
3-3/4Reg
3-3/4
1-1/4
2-7/8
1-1/4
11-13/16
API
Reg
11-13/16
Integral
3-3/4
Integral
Mandrel
1-1/4
Mandrel
605-006
11-13/16
605-006
52506
Integral
52506
8,000
Mandrel
8,000
56,500
605-006
56,500
18,000
52506
18,000
26,000
8,000
26,000
56,500
18,000
26,000
3-1/2
3-1/2IF
API
API IF
4-3/4
4-3/4
2-1/4
3-1/2
2-1/4
API
IF
Integral
4-3/4
Integral
Mandrel
2-1/4
Mandrel
605-018
605-018
Integral
Mandrel
605-018
* Figures areAll
based
on and
a Jarpulling
Tester speed
of 2-1/2infeet
minute.
WARNING:
jarring
loads listed
thisper
manual
assume that force is acting alone along the major axis of the Jar. Torque and
WARNING:
All
jarring
and
pulling
loads
listed
in
manual
assume
that force
is acting
alone
along
theCombining
major axis rotation
of the Jar.
Torque
andcan
Full speed,
approximately
6-1/2
feet
per minute,
is this
needed
to reach
allowable
load.the
tension,
or bending
and
tension,
combine
stresses
that
may
leadmaximum
to failure
at less
than
rated
loads.
and
bending
tension,
or
bending
and
tension,
combine
stresses
that
may
lead
to
failure
at
less
than
the
rated
loads.
Combining
rotation
and
bending
can
lead to fatigue.
lead to fatigue.
WARNING:Operators
All jarring should
and pulling
listed
in milling
this manual
assume
that
forcecomplex
is actingstresses
alone along
theJar
major
axis
of the
the simple
Jar. Torque
and
CAUTION:
also loads
be aware
that
operations
may
cause
in the
other
than
torsional
tension,
orOperators
bending
and
tension,
stresses
that operations
mayfor
lead
tomay
failure
at less
than the
rated loads.
Combining
rotation
and bending
CAUTION:
should
alsocombine
be aware
that milling
cause
complex
stresses
inWhen
the Jar
other than
the
simple
torsional
and
tensile
values listed
on page
30.
The weight
necessary
milling
can
cause
bending
forces.
combined
with
torsional
forces, can
very
leadtensile
to
fatigue.
and
values
on pagein30.
The areas
weightofnecessary
for milling
cause
bending
forces.
combined
withhave
torsional
forces,
very
high
stresses
may listed
be generated
some
the Jar. Rotating
the can
Jar in
a deviated
hole
or atWhen
a neutral
point may
a similar
effect.
high stresses
may are
be generated
in
some
areas
of not
the Jar.
Rotating the
Jar in aoperators
deviated should
hole or exercise
at a neutral
pointand
maybe
have
a similar
effect.
Milling
operations
necessary
at
times
and
are
discouraged.
However,
caution
aware
of
the
possible
CAUTION: Operators should also be aware that milling operations may cause complex stresses in the Jar other than the simple torsional
Milling
operations
are necessary
at times
and are not discouraged. However, operators should exercise caution and be aware of the possible
dangers
when
rotating
under
adverse
conditions.
and tensile
values
listed
on page
30. The
weight necessary for milling can cause bending forces. When combined with torsional forces, very
dangers when rotating under adverse conditions.
high stresses may be generated in some areas of the Jar. Rotating the Jar in a deviated hole or at a neutral point may have a similar effect.
LEGAL NOTICE
Milling operations are necessary at times and are not discouraged. However, operators should exercise caution and be aware of the possible
All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and
dangers when rotating under adverse conditions.
Logan Z Type Hydraulic Fishing Jar 29
parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell
Varco.
Logan
Oil Tools Fishing
does not Jar
sell, 29
Logan
Z Type
Hydraulic
STRENGTH DATA
TOOL JOINT CONNECTION
OUTSIDE DIAMETER (INCHES)
INSIDE DIAMETER (INCHES)
STROKE LENGTH (INCHES)
JAR TYPE
7/8
Sucker Rod
1-5/8
1/4
7-1/16
Sub
1-13/16
Wilson FJ
1-13/16
5/16
7
Special
605-000
70822
2-3/8 PH6
5.9# Hyd Bx
2-29/32
1
11-7/16
Sub
2-3/8
EUE
3-1/16
1-1/2
11-9/16
Sub
605-001
74723
1-1/4
API Reg
2-1/4
3/8
6-15/16
Integral
Mandrel
605-002
54020
605-003
68010
605-004
55670
2-3/8
API Reg
3-1/8
1
11-13/16
Integral
Mandrel
605-005
52504
2-7/8
API Reg
3-3/4
1-1/4
11-13/16
Integral
Mandrel
605-006
52506
15,400
18,000
21,000
35,400
27,800
32,400
56,500
46,300
59,400
118,500
194,800
160,200
229,200
345,000
260
1,100
1,450
340
1,360
1,800
1,800
1,560
2,100
2,260
2,200
3,000
2,200
2.300
3,100
4,060
2,400
3,300
7,640
4,200
5,700
2-3/8
API IF
3-3/4
1-1/2
12-1/8
Sub
2-3/8
EUE
3-3/4
1-7/8
10-1/8
Sub
2-7/8
EUE
4-1/2
2-3/8
12-1/4
Integral
Mandrel
605-010
52653
3-1/2
API FH
4-3/4
1-1/2
11-13/16
Integral
Mandrel
605-011
52530
3-1/2
API IF
4-3/4
2
13-5/16
Integral
Mandrel
605-012
52500
3-1/2
API IF
4-3/4
2-1/4
Integral
Mandrel
605-018
605-007
52528
605-008
52497
2-7/8
API IF
4-1/4
1-15/16
11-13/16
Integral
Mandrel
605-009
52502
46,000
46,500
46,700
49,000
85,000
74,500
299,700
179,500
430,300
375,000
591,900
468,800
5,340
3,400
4,600
2,980
3.500
4,700
9,920
3,500
4,700
11,160
3,600
4,900
18,420
6,300
8,500
17,200
5,600
7,500
Tensile strengths listed above are calculated theoretical yield strengths and are considered accurate to 20%.
Operating torques are set at 50% of the calculated theoretical yield torque and are the maximum recommended operating torques.
These figures do not constitute a guarantee, actual or implied. They are meant to serve as a guide only, and an appropriate safety
allowance must be made in use.
WARNING: All jarring and pulling loads listed in above assume that force is acting alone along the major axis
of the Jar. Torque and tension, or bending and tension, combine stresses that may lead to failure at less than
the rated loads. Combining rotation and bending can lead to fatigue.
CAUTION: Operators should also be aware that milling operations may cause complex stresses in the Jar other than
the simple torsional and tensile values listed above. The weight necessary for milling can cause bending forces.
When combined with torsional forces, very high stresses may be generated in some areas of the Jar. Rotating the Jar
in a deviated hole or at a neutral point may have a similar effect. Milling operations are necessary at times and are not
discouraged. However, operators should exercise caution and be aware of the possible dangers when rotating under
adverse conditions.
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts
does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to
sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
30 Logan Z Type Hydraulic Fishing Jar
Page 30 Z Type Hydraulic Fishing Jars Manual D430
STRENGTH DATA
TOOL JOINT CONNECTION
OUTSIDE DIAMETER (INCHES)
INSIDE DIAMETER (INCHES)
STROKE LENGTH (INCHES)
TYPE JAR
COMPLETE ASSEMBLY Logan Part No.
Bowen No.
MAXIMUM JARRING LOAD (LBS)
LIFT LOAD AFTER JARRING
TENSILE @ YIELD (LBS)
TORQUE @ YIELD (FT-LBS)
COLLAR WEIGHT ABOVE JAR (LBS)
4-1/2
API FH
6
2
11-7/16
Integral
Mandrel
605-013
52498
4-1/2
API IF
6-1/4 & 6-1/2
2-1/4
14-3/8
Integral
Mandrel
605-014
52544
5-1/2
API Reg
6-3/4
2-3/8
14-11/16
Integral
Mandrel
605-015
52680
6-5/8
API Reg
7-3/4 & 8
3-1/16
14-3/8
Integral
Mandrel
605-016
52711
7-5/8
API Reg
9
3-3/4
13-13/16
Integral
Mandrel
605-017
66346
136,400
159,000
172,800
149,000
214,000
937,000
917,400
1,013,800
1,587,900
1,621,000
34,320
10,200
13,800
40,680
11,800
16,000
48,660
13,000
17,500
64,020
11,000
15,000
92,260
14,300
19,600
Tensile strengths listed above are calculated theoretical yield strengths and are considered accurate to 20%.
Operating torques are set at 50% of the calculated theoretical yield torque and are the maximum recommended operating torques.
These figures do not constitute a guarantee, actual or implied. They are meant to serve as a guide only, and an appropriate safety
allowance must be made in use.
WARNING: All jarring and pulling loads listed in above assume that force is acting alone along the major axis
of the Jar. Torque and tension, or bending and tension, combine stresses that may lead to failure at less than
the rated loads. Combining rotation and bending can lead to fatigue.
CAUTION: Operators should also be aware that milling operations may cause complex stresses in the Jar other
than the simple torsional and tensile values listed above. The weight necessary for milling can cause bending
forces. When combined with torsional forces, very high stresses may be generated in some areas of the Jar.
Rotating the Jar in a deviated hole or at a neutral point may have a similar effect. Milling operations are necessary
t times and are not discouraged. However, operators should exercise caution and be aware of the possible dangers
when rotating under adverse conditions.
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell,
or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
7/8
1-13/16
1-1/4
2-1/4
1-1/4
3/8 Reg
API
605-002
2-1/4
54020
3/8
2-3/8 PH6
5.9# Hyd Bx
2-29/32
2-3/8
PH6
1 Hyd Bx
5.9#
605-003
2-29/32
168010
2-3/8
EUE
3-1/16
2-3/8
1-1/2
EUE
605-004
3-1/16
55670
1-1/2
2-3/8
API Reg
3-1/8
2-3/8
1 Reg
API
605-005
3-1/8
152504
2-7/8
API Reg
3-3/4
2-7/8
1-1/4
API
Reg
605-006
3-3/4
52506
1-1/4
OUTSIDE
DIAMETER
(INCHES)
1-5/8
TOOL JOINT
CONNECTION
7/8
INSIDE DIAMETER (INCHES)
1/4
Sucker Rod
COMPLETE
ASSEMBLY
Logan Part No. 605-000
OUTSIDE DIAMETER
(INCHES)
1-5/8
70822
INSIDE DIAMETER (INCHES)Bowen No.
1/4
Logan Part No. 605-000
COMPLETE
ASSEMBLY
MANDREL
BODY
INSERT
320
Bowen No.
70822
TO MANDREL BODY
1-13/16
1-13/16
5/16
Wilson FJ
605-001
1-13/16
74723
5/16
605-001
74723
605-002
54020
605-003
68010
605-004
55670
605-005
52504
605-006
52506
TOP
SUB TOBODY
MANDREL
MANDREL
INSERT
MANDREL
BODY
TO MIDDLE BODY
TO MANDREL
BODY
KNOCKER
TOMANDREL
MANDREL
TOP SUB TO
MANDREL
WASHPIPE
MANDRELTO
BODY
TO MIDDLE BODY
MIDDLE
BODY
WASHPIPE BODY
KNOCKER
TO TO
MANDREL
MANDREL TO WASHPIPE
MIDDLE BODY TO WASHPIPE BODY
170
350
170
100
350
520
100
520
900
30
150
900
1,050
30
150
1,050
1,130
1,950
1,130
800
1,950
2,070
800
2,070
1,100
2,100
1,100
690
2,100
2,100
690
2,100
2,030
200
690
2,030
2,030
200
690
2,030
3,820
300
1,140
3,820
3,820
300
1,140
3,820
3-1/2
API FH
3-1/2
4-3/4
API
FH
1-1/2
4-3/4
605-011
1-1/2
52530
605-011
52530
3-1/2
API IF
3-1/2
4-3/4
API
2 IF
4-3/4
605-012
252500
605-012
52500
3-1/2
API IF
3-1/2
4-3/4
API
IF
2-1/4
4-3/4
605-018
2-1/4
605-018
9,770
700
9,770
2,130
700
9,210
2,130
9,210
9,750
500
9,750
2,010
500
8,600
2,010
8,600
130
320
150
130
80
150
270
80
270
2-3/8
2-3/8
2-7/8
2-3/8
3-3/4
API IF
1-1/2
3-3/4
605-007
1-1/2
52528
605-007
52528
2-3/8
3-3/4
EUE
1-7/8
3-3/4
605-008
1-7/8
52497
605-008
52497
2-7/8
4-1/4
API
IF
1-15/16
4-1/4
605-009
1-15/16
52502
605-009
52502
2-7/8
EUE
2-7/8
4-1/2
EUE
2-3/8
4-1/2
605-010
2-3/8
52653
605-010
52653
2,670
3,570
2,670
3,570
890
3,570
890
3,570
1,490
3,570
1,490
3,570
410
3,570
410
3,570
4,960
500
4,960
1,880
500
4,960
1,880
4,960
5,580
500
5,580
1,930
500
5,580
1,930
5,580
TOOL JOINT
CONNECTION
OUTSIDE
DIAMETER
(INCHES)
INSIDE DIAMETER (INCHES)
OUTSIDE DIAMETER
(INCHES)
COMPLETE
ASSEMBLY
Logan Part No.
INSIDE DIAMETER (INCHES)Bowen No.
COMPLETE ASSEMBLY Logan Part No.
MANDREL BODY INSERT
Bowen No.
TO MANDREL BODY
MANDREL
BODY
INSERT
TOP SUB TO MANDREL
TO MANDREL
BODY
MANDREL
BODY
TO MIDDLE BODY
TOP SUB TO
KNOCKER
TOMANDREL
MANDREL
MANDRELTO
BODY
TO MIDDLE BODY
MANDREL
WASHPIPE
KNOCKER
TO TO
MANDREL
MIDDLE
BODY
WASHPIPE BODY
MANDREL TO WASHPIPE
MIDDLE BODY TO WASHPIPE BODY
4-1/2
4-1/2
5-1/2
6-5/8
7-5/8
API FH
API IF
API Reg
API Reg
API Reg
TOOL JOINT
CONNECTION
4-1/2 & 6-1/2 5-1/2
6-5/8
7-5/8
OUTSIDE
DIAMETER
(INCHES)
64-1/2
6-1/4
6-3/4
7-3/4 & 8
9
API IF
API
Reg
API
Reg
API
Reg
INSIDE DIAMETER (INCHES)
2API FH
2-1/4
2-3/8
3-1/16
3-3/4
OUTSIDE DIAMETER (INCHES)
6
6-1/4 & 6-1/2 6-3/4
7-3/4 & 8
9
605-014
605-015
605-016
605-017
COMPLETE ASSEMBLY Logan Part No. 605-013
INSIDE DIAMETER (INCHES)
2
2-1/4
2-3/8
3-1/16
3-3/4
Bowen No.
52498
52544
52680
52711
66346
605-014
605-015
605-016
605-017
COMPLETE ASSEMBLY Logan Part No. 605-013
MANDREL BODY INSERT
Bowen No.
52498
52544
52680
52711
66346
TO MANDREL BODY
MANDREL BODY INSERT
TOP SUB TO MANDREL
TO MANDREL BODY
MANDREL BODY TO MIDDLE BODY
17,530
20,340
24,330
32,020
57,760
TOP SUB TO MANDREL
KNOCKER TO MANDREL
2,200
2,000
1,900
3,200
6,200
MANDREL BODY TO MIDDLE BODY
17,530
20,340
24,330
32,020
57,760
MANDREL TO WASHPIPE
4,990
5,460
7,260
11,680
21,540
KNOCKER TO MANDREL
2,200
2,000
1,900
3,200
6,200
MIDDLE BODY TO WASHPIPE BODY
17,160
20,340
24,330
32,010
46.130
MANDREL TO WASHPIPE
4,990
5,460
7,260
11,680
21,540
MIDDLE BODY TO WASHPIPE BODY
17,160
20,340
24,330
32,010
46.130
The make-up torques listed above are the maximum recommended make-up torques for each connection.
Values are set at 50% of the calculated theoretical yield torque. Torques this high are not required for all fishing jobs.
The make-up torques listed above are the maximum recommended make-up torques for each connection.
Lower values will result in less thread wear.
Values are set at 50% of the calculated theoretical yield torque. Torques this high are not required for all fishing jobs.
The
tightening
torque
values
were
calculated
Lower
values will
result
in less
thread
wear. assuming Itcolube or similar zinc-based grease was applied to all threads and shoulders.
LEGAL
NOTICE
The tightening
torque values were calculated assuming Itcolube or similar zinc-based grease was applied to all threads and shoulders.
All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts
does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to
32 National
Logan Z
TypeVarco
Hydraulic
Fishing
Jar
sell,
Oilwell
(Bowen)
products.
32 Logan
Z Type Hydraulic
JarOilwell Varco.
Bowen
is a registered
trademarkFishing
of National
J1045-001
3/8" Fill Plug
Adapter
J1046-001
7/16" Fill Plug
Adapter
J1086
1/4" Female Couplers
J1224-001
5/8" Fill Plug
Adapter
J1374
Hex Bushing
J1373
Box Coupler
568010-100
O-Ring
568005-100
O-Rings
J1376
Hose Fitting
J1085
1/4" Male Couplers
J1078
1/4" x 1" Pipe Nipple
J1080
Line Filter
J1077
Fill Plug Wrench
L69248
Piston Ring Pliers
Piston Ring Pliers are not included in the Service Kit
and must be ordered separately at additional cost.
J1075
Torx Head
Fill Plug Wrench
J1073
Installation Tool
J1074
O-Ring Installation Tool
AG1000-xx *
Mandrel Setting Tool
Setting Tools are not included in the Service Kit and must be
ordered separately for each tool size at additional cost.
* Refer to Parts Lists on pages 16 28 for complete part numbers.
Pump Hose
Pump Hose
J1072
6 Ft. Exhaust Hose
J1072
6 Ft. Exhaust Hose
J1069
Volume Pump
J1069
Volume Pump
J1070
Metal Box
J1070
Metal Box
COMPLETE ASSEMBLY
Consists of:
COMPLETE ASSEMBLY
SEAL PROTECTOR
RING
Consists
of:
INSTALLATION TOOL
SEAL PROTECTOR RING
O-RING
INSTALLATION TOOL
INSTALLATION TOOL
O-RING
FILL PLUG WRENCH
INSTALLATION TOOL
T30 TORX HEAD
FILL PLUG WRENCH
FILL PLUG WRENCH
T30 TORX HEAD
ALLEN HEAD
FILL PLUG WRENCH
1/4" x 1" PIPE NIPPLE
ALLEN HEAD
1/4" x 1" PIPE NIPPLE
LINE FILTER
Bowen No.
626
Bowen No.
33435
Logan Part No.
J1074
6 FT. EXHAUST HOSE
Logan Part No.
J1072
Logan Part No.
J1075
PUMP HOSE
Logan Part No.
Bowen No.
626
Bowen No.
33435
Bowen No.
359T
Bowen No.
2581
Logan Part No.
J1075
PUMP HOSE
Logan Part No.
LINE FILTER
Logan Part No.
J1080
5/8" FILL PLUG ADAPTER
Logan Part No.
J1224-001
1/4" MALE COUPLER
Logan No.
Part No.
J1085
7/16" 20 NF
LoganNo.
Part No.
Bowen
56565
Bowen
J1046-001
BowenPart
No. No.
656
FILL 20
PLUG
Bowen
No.No.
Bowen
No.No.
568010
3/8"
x 1/4" GALVANIZED Logan
J1373
O-RING
Logan
Part
568010-100
1/8
BOX
x
1/4
Logan
Part
No.
J1374
O-RING
70
DURO
NITRILE
Logan
Part
No.
568005-100
BOX COUPLER
Bowen No.
Bowen No.
568010
PIN HEX
BowenPart
No. No.
Bowen
No.No.
568005
1/8
BOXBUSHING
x 1/4
Logan
J1374
O-RING 70 DURO NITRILE Logan
Part
568005-100
PIN HEX BUSHING
Bowen No.
Bowen No.
568005
Mandrel Setting Tools are not included in the Service Kit and must be ordered separately for each tool size at additional cost. See pages 16 28 for
part numbers.
Pliers
(Logan
No. 26000-055)
are be
notordered
includedseparately
in the Service
Kit and
beadditional
ordered separately
at additional
Mandrel
SettingPiston
ToolsRing
are not
included
in Part
the Service
Kit and must
for each
tool must
size at
cost. See pages
16 28cost.
for
part
numbers.
Piston
Ringspecify:
Pliers (Logan
26000-055)
are not
in the Service Kit and must be ordered separately at additional cost.
When
ordering,
please
NamePart
and No.
number
of assembly
or included
part
When ordering, please specify: Name and number of assembly or part
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts
does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to
sell, National Oilwell Varco (Bowen) products.
34 Logan Z Type Hydraulic Fishing Jar
Bowen
is a Z
registered
trademarkFishing
of National
34 Logan
Type Hydraulic
Jar Oilwell Varco.
Page 34 Z Type Hydraulic Fishing Jars Manual D430
NOTES
NOTES