Nothing Special   »   [go: up one dir, main page]

Nantai Products 2014

Download as pdf or txt
Download as pdf or txt
You are on page 1of 40

NANTAI

TAIAN NANTAI EXPERIMENTAL EQUIPMENT CO.LTD


NANTAI AUTOMOTIVE TECHNOLOGY CO., LTD
International Manager: Jun gang Hou (Mr.Hou)
Mobile Phone: +86-15864752393
FAX +86-538-6627679
E-mail: taianchina@hotmail.com
taianchina@yahoo.cn

(MSN/SKYPE)
Yahoo! Messenger

taianchina@gmail.com

(Gtalk)

15864752393@188.com (nantaichina@188.com)
12psbiii@gmail.com

dieseltester@nantai-china.com

nantai@nantai-china.com
SKYPE: taianchina@hotmail.com (nantaichina)
QQ
87982354
WeChat:
+86-15864752393 taianchina)
WhatsApp: +86-15864752393
Web Site www.nantai-china.com
Manager: Jun gang Hou (Mr.hou)

Tel/WhatApp: +86-15864752393 SKYPE: taianchina@hotmail.com

NANTAI

Test bench

12PSB Normal sell design

12PSB (Old design for Russian market)

-----------------------------------------------------------------------------------------------------------------------------------------------------------

NT2001/NT2001PLC

NT3000

NTS619

NTS815
Diesel fuel injection test bench is design for customers require. This series test bench adopt high quality frequency
conversing device, and it has characteristic with hi-reliability, ultra-low-noise, energy save, high output torque, perfect
auto-protecting function and operate easy. It is the kind of product with high quality and good price in our business.
Used for Bosch in line pumps of K,M,MW,A,B,BV,P(ZU,ZW,ZM) and BOSCH rotative distributor injection pumps
EP/VA,EP/VM,VE.F,also used for Chinese pumps such as ,,,K,P7,BQ.etc.

Manager: Jun gang Hou (Mr.hou)

Tel/WhatApp: +86-15864752393 SKYPE: taianchina@hotmail.com

NANTAI

FUNCTION

12PSB

NT2001
NT3000
NTS619

NT2001
PLC

NTS815

1,Measurement of each cylinder delivery at any speed

2. Test point and interval angle of oil supply of injection pump.

3. Checking and adjust the mechanical governor.

4. Checking and adjusting the distributor pump.

5..Experiment and adjusting of behavior of supercharging and


compensatory device

6. Measurement of oil return of distributing pump

7. Testing of the electromagnetic valve of distributor pump.(12V/24V)

8. Measurement of the internal pressure of distributor pump.

9. Checking of the advance angle of advance device.

10. Checking the sealing of injection pump body

11. Install tube of auto-sucking oil supply can check on oil supply
pump(including VE pump)

Control system

12.Dgitial controller
13. Computer controller + digital controller

Oil
quantity
measure system

14.Glass tube

15, LCD touch


screen

LCD screen

15.Electronic fuel delivery system (flow sensor)


LCD touch screen

optional

16, TRAVEL OF TOOTH BAR

optional

optional

optional

optional

17, OIL LUBRICATE

optional

optional

optional

optional

18, FORCED COLLING

optional

optional

optional

optional

Technical characteristic
Adjustable
cylinders
numbers
12

Out power(Kw)

7.5 11
15 18.5

RPM

Rpm
pre-set

Temperature
control system

Positive pressure
system

Positive pressure
system

0-4000

Advanced angle

Capability with pump


type

(On request)

All in- line and rotary


pump

internal
Oil return
Air supply DC power supply pressure of
travel of tooth bar
of VE
VE pump
pump

Manager: Jun gang Hou (Mr.hou)

(On request)

Tel/WhatApp: +86-15864752393 SKYPE: taianchina@hotmail.com

NANTAI

Standard accessory

Oil lubrication station

(12PSB, NT2001, NT2001PLC, NT3000, NTS619, NTS815)

Used for test bench without oil lubrication system

Common Rail Test bench


Common Rail Injector Test Bench

PQ1000, PQ2000, CRI-2000 used to test kinds common rail injector, they adopt digital controller. PQ1000 and
PQ2000 need connect air pressure pump to normal working, CRI-2000 have pump inside, it can work itself.
Function :
1, it can be used to test Bosch, Delphi, Denso, Siemens injector.
Manager: Jun gang Hou (Mr.hou)

Tel/WhatApp: +86-15864752393 SKYPE: taianchina@hotmail.com

NANTAI

2, check the injector starting pressure


4, check the seal of injector.
6, check the injector oil flow
8. piezo injector testing(optional)

3, check the injector spray quality


5, check injection quantity and back oil quantity.
7, check the injector pre injection and main injection

NTS300
NTS300 Test bench is our latest indepentent researched special device to test the performance of high-pressure
common rail injector, controlled by industrial computer, Windows operating system. The oil quantity is measured by
sensor and displayed on computer screen(Electronic fuel delivery system). All data can be searched and saved. It
adopts BOSCH(DENSO) original common rail pump to provide 0~1600 bar for rail pressure(DENSO). The rail pressure
can be adjusted automatically,and it also provide pressure overload protect. It can test common rail injector of BOSCH,
SIEMENS, DELPHI, DENSO. Advanced technology, steady performance, precise measurement and convenient
operation.

>>>FUNCTION
1.Test injector brandsBOSCH, SIEMENS, DELPHI, DENSO.
2. Test 1 piece of injector.
3. Test the pre-injection of common rail injector.
4. Test the max. oil quantity of common rail injector.
5. Test the cranking oil quantity of common rail injector.
6. Test the back flow oil quantity of common rail injector.
7.Test the average oil quantity of common rail injector.
8. Test the seal performance of common rail injector.
9. Data can be searched and saved.

Manager: Jun gang Hou (Mr.hou)

Tel/WhatApp: +86-15864752393 SKYPE: taianchina@hotmail.com

NANTAI

NTS200(EPS200) test bench is our latest indepentent researched special device to test the performance of
high-pressure common rail injector, controlled by industrial computer, Windows operating system. The oil quantity is
measured by sensor and displayed on computer screen(Electronic fuel delivery system). All data can be searched and
saved. It adopts BOSCH original common rail pump to provide 0~2000 bar for rail pressure. The rail pressure can be
adjusted automatically, and it also provide pressure overload protect. It can test common rail injector of BOSCH,
SIEMENS, DELPHI, DENSO. Advanced technology, steady performance, precise measurement and

>>>CHARACTERISTIC
1. Controlled by industrial computer in real time, Windows operating system.

2. Oil quantity is measured by sensor and displayed on 10.4 tactile LCD screen;
3. More than 700 kinds of injecotors data can be searched and used.
4. It is installed BOSCH common rail pump to provide 0~2000 bar
5. Rail pressure can be tested in real time,
6. Provide pressure overload protect
7. Pulse and frequency of the injector can be adjusted.
8. Injection time can be set.
9. Protection function of short-circuit.
10. Precise measurement, easy operation, low noise.
11.Frequency converter inside to keep the RPM.

>>>FUNCTION
1.Test injector brandsBOSCH, SIEMENS, DELPHI, DENSO.
Piezo injector testing(option function)
2. Test 1 piece of injector.
3. Test the Leakage performance of common rail injector.
4. injection oil quantity and back oil quantity(pre-injection, Idling, emissions, full load)
5. Electronic fuel delivery measuring, automatic testing and detection.
6. Data can be searched and saved.

>>>TECHNICAL PARAMETER
1. output power:1.5KW
3. motor speed: 0-3000RPM
Manager: Jun gang Hou (Mr.hou)

2. power voltage:220V 1phase


4. Oil pressure:0-2000bar
Tel/WhatApp: +86-15864752393 SKYPE: taianchina@hotmail.com

NANTAI

5. flow measure range: 0-600ml/1000times


7. temperature control range: 40+-2

6. flow measurement accuracy: 0.1ml

NTS100(EPS100) common rail injector test bench, pressure controlled automatically, display the
frequency and pluse at the screen.
It can test common rail injector of BOSCH, SIEMENS, DELPHI, DENSO. Advanced technology, steady
performance, precise measurement.
Injector testing: leakage, injection oil quantity and back oil quantity(pre-injection,Idling, emissions, full load)
Main parameter
1. output power:1.5KW
2. power voltage:220V 1phase
3. motor speed: 0-3000RPM
4. Oil pressure:0-2000bar
5. flow measure range: 0-600ml/1000times
6. flow measurement accuracy: 0.1ml.

Common Rail System Test Bench


CR3000 common rail system test bench

Manager: Jun gang Hou (Mr.hou)

Tel/WhatApp: +86-15864752393 SKYPE: taianchina@hotmail.com

NANTAI

The function of the tester for CR high pressure pumps is to provide the desired signal to drive the solenoid in the pump
being tested. CR3000 common rail Test bench can used for testing following pumps:
BOSCH CP1 BOSCH CP2BOSCH CP3
DELPHI SIEMENS, DENSO HP2 AND HP3.
It has the functions to test the electromagnetic injectors.( optional: piezo injector testing)
It also can test 6 common rail injectors in one time.

Design Features
l
l
l
l

Modulated driving signal to ensure the safety of the solenoid of the CR pump
Adjustable duty cycle for the driving signal
Short circuit protection for the output circuitry of the solenoid driving signal
Measure and LCD display rail pressure

CR3000A/CR3000A-708 common rail system test bench

CR3000A

Manager: Jun gang Hou (Mr.hou)

CR3000A-708

Tel/WhatApp: +86-15864752393 SKYPE: taianchina@hotmail.com

NANTAI

CR3000A/CR3000A-708 COMMON RAIL TEST BENCH is mainly test for common rail pump and injector.
Also it is continuous fuel delivery analysis computerised measuring system for conventional and new diesel
injection systems. The electronic fuel delivery measuring system is compulsory for modern diesel injection system
testing. It guarantees a high level of reproductivity of the measured valuse.
CR3000A COMMON RAIL TEST BENCH is the professional test bench which is used for testing common rail
system, can finish the high-pressure common rail system functional testing.

>>>System Application:
The system is suitable for detection of BOSCH, DENSO, DELPHI and SIEMENS common rail pump and
injectors. Such as CP1, CP2.CP3, HP3 series injector pump and the type of Electromagnetic injectors,
It also can test 6 common rail injectors in one time.

>>> Technical parameters


1, Main motor speed: 0-4000 r / min can be adjustable.
2, Motor power: 7.5KW, 11KW, 15KW, 18.5KW optional.
3, Fuel Injector open voltage Control range: 12V, 80V, 150V Control accuracy: phase adjustment
4, Injector opening frequency Control: 0-1000HZ Control accuracy: 1HZ
5, Fuel Injector Hold Time Control: 0-65535us
6 Delivery Oil CountControl: 0-1000 times Control accuracy: 1 times
7, Fuel pressure control Control: 0-2000bar Control accuracy: 1bar
8, Electronic power: 3 PHASE 380V or 3 PHASE 220V

>>>Optional function:
1, Test piezo injector function. 2,Test HP0 pump function. 3, With Bosch DRV VALUE
4,Checking the pump flowing.5.Forced cooling

CRS200/CRS300 common rail system test bench

CRS200+NTS815

Manager: Jun gang Hou (Mr.hou)

CRS200

Tel/WhatApp: +86-15864752393 SKYPE: taianchina@hotmail.com

NANTAI

CRS300+NT2001

CRS300

System using scope


The system is suitable for test all kinds of BOSCH, DENSO, DELPHI common rail system fuel pumps, rail and injector.
Such as CP1, CP2, CP3, HP0 etc..series of pump and injector. Using this equipment, it should install on the diesel
pump test bench, put the required common rail pumps or injectors installed on the specified location, connect the power
to let the machine work, and to test/calibrate it according to the related instructions.

Main technical parameters


1. Injection open pressure:
Control scope: 24V, 80V, 150V,
Control accuracy: stage regulator
2. Injection open frequency:
Control range: 0-1000HZ
Control accuracy: 1HZ

3. Injection open hold time


Control range: 0-65535us
Control accuracy: 1us

Common Rail Tester Simulator


Common Rail Tester Simulator
Model name

CR2000 common
rail system tester

For pump or injector

Photo

It can test 6 common rail injectors in one


Time,and also for common rail pump
1. PUMP-CR2000 , it for test common
rail pump
2. EM-CR2000 , it is used to test
electromagnetic injector
3. PE-CR2000 it is for test Siemens piezo
injector
4. ACCESSORIES (rail, pressure
sensor, oil pipe, coupling and so on)
BOSCH CP1 BOSCH CP2BOSCH CP3

Manager: Jun gang Hou (Mr.hou)

Tel/WhatApp: +86-15864752393 SKYPE: taianchina@hotmail.com

10

NANTAI

DELPHI SIEMENS, DENSO HP2 AND


HP3.
It also can test 6 common rail injectors in one
time.

CRP680
Common rail pump
tester simulator

CR2000A
common rail system
tester simulator
-new
English language
Russian language

CR1000 common
rail injector tester
simulator(
1 cylinder)
---new

BOSCH: CP1CP2CP3
DENSO :HP2, HP3HP4HP0
JIER,
DELPHI
SIEMENS
CR pump:
BOSCH CP1,BOSCH CP2,BOSCH CP3,
DELPHI, SIEMENS, DENSO HP2 AND HP3.
CR injector(6 Cylinder):
BOSCH, DENSO ,DELPHI.
Pressure control way:
CLOSE LOOP or OPEN LOOP
BOSCH,DELPHI,DENSO,SIEMENS
And it also can test piezo
injector(optional function)

PQ400-CR2

Manager: Jun gang Hou (Mr.hou)

S60H-CR2

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

11

NANTAI

Electronic pump tester


Photo

Model

Function

EDC-VP37 tester

It is used to test the electronic


ve pump(VP37 pump)

EDC-Zexel RED4 in line pump


tester

It is used to test the Zzexel


RED4 in line pump

DENSO ECD V3 V4 V5 tester

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

It used to test the DENSO ECD


V3,V4,V5 pump

MSN/SKYPE: taianchina@hotmail.com

12

NANTAI

VP44 pump tester

The tester use high-precision, high-power switch, and over-current protection circuit that may occur in the over-current
and short circuit protection devices can not damage the self, and prompts the user to fuel injection pump for damage.
Control output circuit using high-frequency devices ensure that the output voltage accuracy and synchronization time.
equipment also can adjust the mechanical parts of VP44.

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

13

NANTAI

EUP/EUI tester with cam box


Now we can provide 23pcs different model adaptor
DETROIT EUI--60/50 N2.N3......
DEPHI E1/E3/.....

CUMMINS EUI--L10 N14....... CATERPILLAR EUI--3196/3176/C10/C12/C15,3406, 3500.....

IVERCO EUI--CURSOR8/10/13..

VOLVO/AUDI/VW /LAND ROVER/JOHN DEAR EUI.....

EUP-DDC/MTU/MERCEDES/MACK/RENAULT/DELPHI/DEUTZ.....

The EUP/EUI repair tester consists of a mechanical cam box with specified EUP adapter kits and an electronic controller.
The cam box will be installed on a standard high pressure pump test bench. The EUP/EUI being tested will be installed
in the cam box with the adapter. The electronic controller provides signal to drive the EUP solenoid synchronous with
cam shaft rotation. The EUP fuel outlet is connected through high pressure fuel line to an injector. The EUP fuel injection
quantities can be checked at given speeds and loads to judge its quality.
Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

14

NANTAI

PT Cummins Test Bench


EPT2000
PT/EUI injector flow test bench
It is special equipment used to provide adjustment of flux test for
CUMMINS PT fuel injector. It can simulate the running condition
of engine. It has high measure precision, quick sampling speed,
extraordinary property, and convenient operation.
Fit for: 5/16" and 3/8"PTBPTCPTD and 3/8" overhead PTD
fuel injectors flow test adjustment or spurt inclination test.
It also can test the flow of all EUI/PT injector and also EUP.

PT212

PT 212 PT fuel pump Test bench is special equipment used to provide


test and calibration for CUMMINS PT fuel pump. It has abundant
functions, high measure precision, and fast sampling.
For instance: Fit for: PT(G), PT(G)VS, PT(G)MVS, PTGSVS, PTGAFC,
PTGAFC-VS, PTR, PTH-VS fuel pumps etc and damping ASA valve.

CUMIMINS PUMP TEST BENCH

Functions
1.Gear pump pressure and vacuum test
2. Idle speed test
3. Weight assistant pressure test
4. Pressure and flow test in
every check point 5. AFC test
6. Oil stopping test 7. Route test of
throttle 8. Oil return test of throttle 9. ASA valve test
10. EFC test
11. Shut down valve test

PT411
CUMMINS INJECTOR TEST BENCH
PT411 is special equipment used to provide adjustment of flux test for
CUMMINS PT fuel injector. It can simulate the running condition of
engine. It has high measure precision, quick sampling speed,
extraordinary property, and convenient operation.
Fit for: 5/16" and 3/8"PTBPTCPTD and 3/8" overhead PTD fuel
injectors flow test adjustment or spurt inclination test.
Test Functions
1. Flow test adjustment
2. Spurt inclination test

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

15

NANTAI

PT301
CUMMINS INJECTOR
LEAKAGE TESTER

It is special equipment used to provide seal test for PT CUMMINS Fuel


injectors. It has quick sampling speed, extraordinary property, and
convenient operation.
Fit for: 5/16" and 3/8"PTB, PTC, PTD and 3/8" overhead PTD fuel
injectors seal test.
Functions:
1.. PT fuel injector cylinder block seal
2. PT fuel injector cylinder seal
3. PT fuel injector ball check valve seal

PT101
Top Stop Setting Fixture
Top Stop Setting Fixture-All PT (type D), STC (HVT), and Hyperbar Top
Stop Injectors. Measuring fuel injector volume completed, we must test
he injector plunger subassembly. (including STC (HVT) and hypervar top
stop injectors). This Top Stop Setting Fixture used to the test of the
injector. After the leakage testing of the injector is completed, the injector
can be assembles to the point where the plunger top stop, or plunger
travel setting can be made.

PT800
CUMMINS TOOLS
Fit for: PTG
PTGVSPTGMVSPTGSVSPTG
AFCPTGAFC-VSPTHVSPTRfuel pumps etc.
Fit for: 5/16" and 3/8"PTBPTCPTD and 3/8" overhead PTD fuel
injectors etc

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

16

NANTAI

HEUI test bench

Improve fuel economy & enhance performance


Measurement fuel delivery of four HEUI injectors
Sealing test for injectors upper seat of the solenoid control valve
It can test HEUI(CAT C7/C9CAT 3408...)
Main parameter
Ourput power:3KW
High pressure adjust range0-500bar
Low pressure adjust range0-6bar
Electronic fuel delivery system,computer display

Nozzle tester
Model

PJ40

Description
It employ the characters of boost speed, high-stability,
reasonable structure, flexible operation, fix convenience.
PJ-40 Nozzle tester is the ideal instrument calibrating and
testing fuel opening pressure, atomization, fuel angle and
confined of needle.
Main technical characteristic
1. max pressure
40MPa
2. size of outside
320300500
3. net weight
30kg
4.pressure gauge range 0-60Mpa

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

Photo

MSN/SKYPE: taianchina@hotmail.com

17

NANTAI

S60H
(BOSCH
TYPE)

PS400A

PQ400
(Double
spring
injector
tester )

PQ400S
(Double
spring
injector
tester )

it Is used to adjust and calibrate the injection nozzle


opening pressure and to carry out leakage, spray pattern
and chatter characteristic tests.
For nozzle size R, S and T.
In basic design with 0-40 Mpa (0-400 bar) pressure
gauge.
In conjunction with a specially ordered pressure gauge,
this tester can also be used for testing light crude oil
injection valves.
1. Initiative injecting press of injector
2. Sound of needle valve vibartion
3. spraying shape
4. Sealing function of needle valve and nozzle body
mating pair
5. Sealing function in sreaponse to press.

Allows to test and to calibrate diesel double springs


injectors.
Equipment with a manometric gauge for internal pressure
regulation
Digital display permits to calibrate the injector opening
pressure
One shot and continuous spraying test
rate of oil pressure and air pressure is 50:1
Allows to test and to calibrate diesel double springs
injectors.
Equipment with a manometric gauge for internal pressure
regulation
Digital display permits to calibrate the injector opening
pressure
One shot and continuous spraying test
rate of oil pressure and air pressure is 50:1

QCM200 Gasoline injector tester and cleaner


This product is applicable to diagnose and clean fuel injectors of various cars manufactured worldwide, improving
stability, reliability and reducing pollution. It can perform automatic detecting, analyzing and cleaning.

Main functions
Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

18

NANTAI

It can not only diagnose and analyze the performance of the fuel injector, but also inspect dribbling, atomization,
injecting angle, distributive value, uniformity coefficient, and their on off cycle, etc of single or multiple fuel injectors.
1. Can do reverse flushing, flush-back cleaning, ultrasonic flushing, and disaffiliation-free
flushing to one or more
fuel injectors
2. Automatically simulate the overall process under various pulse width and engine speed. The operation status of the
fuel injectors can also be observed whether at acceleration and deceleration.
3. Can manually set time, pulse width and rotation speed of the fuel injector, and observe the performance under varied
parameters. Ease and convenience of operation.
4. Can determine the shortest on-off cycle and the quality of the injector
5. Can do oil circuit testing, and disaffiliation-free flushing to the engine

Technical Parameter
l
l
l
l
l
l
l
l
l
l
l

Voltage: AC220V10%
50HZ
500W
Operation Temperature: -10C40
Tank Capacity: 4L
Test Tube Capacity: 120CC
Ultrasonic Frequency: 40KHZ
Rotation Speed: 010000r/min
Step: 50r/min
Time Counting Range: 010000 sec
Step: 50 sec (adjustable)
Oil Pump Pressure: 1.8kg/cm----10kg/cm
Fuel Flow: 4.5 L/min

QCM300 auto electric fuel pump test bench


l
l
l
l
l

Manager: Jun gang Hou (Mr.hou)

Auto Electric Fuel pump test bench, it can test the Comprehensive
performance of variety of automotive electric fuel pump assembly.
Such as Voltage, oil flow, oil pressure.
It can be adjusted:
1. Simulation of oil pressure at various conditions of vehicle fuel
pump.
2. The simulation of fuel supply at various conditions of vehicle fuel
pump .

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

19

NANTAI

NTC--Diesel Fuel
Cleaning Tester

Tank

This Diesel Tank Cleaning Machine applies to all kinds of diesel tank.
When cleaned by this machine, the diesel tank and the pipe neednt to be dismantled. The diesel oil is exacted by the
control pipe and then sent to the coarse strainer (one canister) for primary filter. After that the macroaggregated impurity
and water are filtered. Then the gear pump compresses the diesel and sends them to fine strainer (another canister) for
further filtering. After going through the double-filtration, the diesel fuel is injected to the corners of the tank at the
pressure of 1.5 kilogram, and gets mixed with the rest impurity oil to go into the next cycle of double-filtration system.
The diesel fuel is filtered at the speed of 30L/min. After such multiple cycles, the diesel fuel is clean at last.

TEST BED

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

20

NANTAI

.Balance Machine for Turbo

Balance machine(NT-D1)

Balance machine-2(NT-D2)

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

21

NANTAI

NT-D3 Turbocharger Balancing

Taian Nantai Experimental Equipment Co.,ltd introduce the new generation turbo cartridge dynamic balance
machine: NT-D3 Turbo Overall full speed balancing machine, through with many years work experience in the

files of the turbocharger.


NT-D3 Turbo Overall full speed balancing machine are fulled automated, eliminates the differences due to
manual operator. So the testing results are more repeatability and compatibility.
Its bracket and system adopt full new design, to ensure the operating more convenient and reliable.
Data reading and control system of the machine are fully digital control, using and processing by the latest
generation industry computer Windows XP operating system.
Adopting new software and 15LCD colorful monitor , it not only make all the functions and testing results visible,
and also the operator can direct dialogue with machine.
Features:
1) Frequency control, speed 0-100000R/M adjustable( according to the actual needs)
2) Test result are accurate and stable.
3) Free choice of parameters, custom memory recording mode.
4) Complete parts and accessories , to meet the requirements of the vast majority of the turbocharger.
5) Equipped with compact Pneumatic handwheel, for de-emphasis, work easy and efficient.
Technical parameters
1) Test Piece work rate:0-100 , 000R/Min adjustable
2) Fan power 7.5KW
3) Hydraulic :0-6bar.
4) Fuel tank: 5 liters (SAE 15/30)
5) Voltage: 380V / 50-60HZ

Turbo charger

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

22

NANTAI

1.IMPORTED VEHICLE : TOYOTA, HITACHI, MITSUBISHI, DEUTZ, CAT. MAN, IVECO, VOLVO, PERKINS, ISUZU,
MECEDES--BENZ, KATO, SUMITOMO, KOMATSU, KOBELCO. DAEWOO seriesetc.
2.Gen-set: Cummins K&N series, NT855,K19, K38, L10, HITACHI, CAT, MITSUBISHI, KOBELCO/KATO etc..
3.DOMESTIC VEHICLE: steyr, Iveco, Hongyan, liberation, dongfeng, xichai, ShangChai, Cummins B.C series etc..

Scanner
Model name

F3-D
(Heavy Duty)

Description
. It provides multi-language platform to
meet different customers demands.
Products with integrated structural
design, to achieve 12V, 24V power
supply
automatical
changover.
single-track
working
mode
and
superlarge touch screen operation,
exquisite look and so on, these special
designs make you feel cozy and freely. It
adopts smooth features drive technology
and has good extensibility, which not only
satisfies for the modern vehicle ECU
communication bus testing, but also the
vehicles appearing in the future

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

Picture

Remarks

ENGLISH
RUSSIAN
SPANISH

MSN/SKYPE: taianchina@hotmail.com

23

NANTAI

F3-G
(world cars
+heavy duty)

ENGLISH
RUSSIAN
SPANISH

F3-G is the newest version of


multi-functional intelligentized gasoline
and heavy duty truck diagnostic scanner
universal
automotive
diagnostic
computer. F3-G adopts the advanced
modularized design technology which is
capable of diagnosing and learning a
variety of European, United States,
Asian gasoline, truck power system
quickly and easily. F3-G is the only auto
diagnostic scanner that can test both
gasoline and heavy duty trucks in one
machine

ISO standard injector

Pintle Type

Hole Type

Low-Inertia Hole Type

Standard injector
Name

ISO Standard

Bosch Code

Diameter(mm)

Opening Pre.(Mpa)

ISO7440 A14-17.2

0 681 343 009

17.2+0.3

ISO7440 A14-14.7

1 688 901 000

14.7+0.3

ISO7440 A44-20.7

1 688 901 015

0.4

20.7+0.3

ISO7440 A54-20.7

1 688 901 016

0.5

20.7+0.3

ISO7440 A64-20.7

1 688 901 017

0.6

20.7+0.3

ISO7440 A74-20.7

1 688 901 018

0.7

20.7+0.3

ISO7440 A84-20.7

1 688 901 019

0.8

20.7+0.3

ISO7440 A64-17.2

1 688 901 020

0.6

17.2+0.3

ISO7440 B64-20.7

1 688 901 101

0.6

20.7+0.3

Pintle Type

Hole Type

Low-Inertia Hole

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

24

NANTAI

Type

ISO7440 B64-25.0

1 688 901 102

0.6

25.0+0.3

ISO7440 B74-20.7

1 688 901 103

0.7

20.7+0.3

ISO7440 B74-25.0

1 688 901 104

0.7

25.0+0.3

ISO7440 B84-20.7

1 688 901 105

0.8

20.7+0.3

ISO7440 B84-25.0

1 688 901 106

0.8

25.0+0.3

ISO7440 B54-20.7

1 688 901 109

0.5

20.7+0.3

ISO7440 B54-25.0

1 688 901 110

0.5

25.0+0.3

1. Common Rail Tools

NO.1060 Full common rail tools


(N0.1060-1 CR injector support ,NO.1060-2: 35pcs CR tools)

NO.1062A cr injectors adaptor (12pcs)

Manager: Jun gang Hou (Mr.hou)

NO.1062B injector adaptor(12pcs)


Short clamp

Mobile: +86-15864752393

NO.1061 Simple cr tools

(20PCs)

NO.1062C injector adaptor(5pcs)


Short clamp

MSN/SKYPE: taianchina@hotmail.com

25

NANTAI

7mm
NO.1063A
NO.1072 DENSO 7050 injector adaptor
1 pcs)

NO. 1065 Common rail


Injector demolition Truck tools

NO. 1068A Grinding tools for


Valve assembly ( with high speed drill
bench)

Manager: Jun gang Hou (Mr.hou)

9mm
NO.1063B

No. 1063 rapid connector

NO.1064 Common rail oil pump


assembly and disassembly tools

NO. 1066 CR-A Rail Pressure Tester

NO. 1067 Meter Holder

NO. 1069
test tools

NO. 1070 Pump Rotational Tools For


CP1, CP3 pumps

Valve assembly Leakage

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

26

NANTAI

NO.1071PUMP ROTATIOAL TOOLS


( FOR CP2 U2 pumps)

NO. 1075 SHIMS MEASURING TOOLS


Micrometer 0.001mm

No,1079 Multi-functional adaptors

Manager: Jun gang Hou (Mr.hou)

NO. 1073 Electron MICROSCOPE

NO. 1077 H10 BACKFLOW KIT


For Denso Injectors

No,1080 Multi-functional adaptors

Mobile: +86-15864752393

NO. 1074 Valve


tools(0.001mm)

assembly

test

NO. 1078 H20 Backflow Kits ( for


Caterpillar Kit)

No,1081 Multi-functional adaptors

MSN/SKYPE: taianchina@hotmail.com

27

NANTAI

No,1082 Bosch fuel collector

NO,1083A puller for BOSCH pump


valve

NO.1083B puller for DELPHI pump


valve

NO1084Portable fuel injector flow tool

NO1085
TOOLS

NO.1086 HP0 pump plunger repair tool

NO,1087 Cylinder Pressure Meter For


Diesel Truck

Manager: Jun gang Hou (Mr.hou)

VALVE

ASSEMBLY

TEST

NO.1060A vice type stand for injector


assembling.

Mobile: +86-15864752393

NO.1091 injector dismounting stand

MSN/SKYPE: taianchina@hotmail.com

28

NANTAI

NO. 1068B Grinding tools for


Valve assembly ( with high speed drill
bench)

NO.1092 measuring tools of shims

2.Tools for EUI/EUP

NO.1088 dismounting tools for cummis EUI(N14,L10)

Manager: Jun gang Hou (Mr.hou)

N0.1090 dismounting tools for CAT HEUI injector


(C7,C9,3126 HEUI)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

29

NANTAI

NO.1089 dismouting tools for volvo EUI


(VOLVO 20430583,20440388/20500620)

NO.1093 EUI dismouting stand

NO.1094

nozzle adaptor(EUI/EUP/HEUI)

3. Common Rail Spare Parts

NO.1301 bosch injector repair kits(3pcs)

Manager: Jun gang Hou (Mr.hou)

NO.1302 bosch injector repair kits(7pcs)

Mobile: +86-15864752393

NO.1303 bosch injector ball( 6 cylinder )

MSN/SKYPE: taianchina@hotmail.com

30

NANTAI

NO.1304 bosch injector ball( 4 cylinder)

NO.1305 DELPHI 621C valve

NO.1306 DELPHI 622B valve

4.BOSCH injector valve(Original Bosch or Copy)


FOOR J01 692

FOOR J02 130

FOOR J01 657

FOOR J01 941

FOOR J01 727

FOOR J00 339

FOOR J02 035

FOOR J00 399

FOOR J01 451

FOOR J00 005

FOOR J02 056

FOOR J01 005

FOOR J02 806

FOOR J02 005

FOOR J01 704

FOOR J00 375

FOOR J02 472

FOOR J02 213

FOOR J01 479

FOOR J02 067

FOOR J01 218

FOOV CO1 359

FOOR J02 175

FOOV CO1 358

FOOR J02 466

FOOV CO1 363

FOOR J01 159

FOOV CO1 371

FOOV C01 044

FOOV CO1 383

FOOV C01 033

FOOV CO1 346

FOOV C01 023

FOOV CO1 365

FOOV C01 022

FOOV CO1 338

FOOR J01 329

FOOR J01 819

FOOR J01 747

F00V C01 051

FOOR J01 714

F00V C01 054

FOOR J02 004

F00V C01 045

5. High-precision adjustment Gasket


B11
19/S22

0.900-1.500

0445-120-002/008/007/018/032/103/113/114/208/210/043/089/019/

0.01mm/Type

020/029/059/120/123/125/2310986-435-501/503/505/508/502/523

61Types

Total:610pcs

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

31

NANTAI

B12
18/S22

0.900-1.500

0445-120-002/008/007/018/032/103/113/114/208/210/

0.01mm/Type

043/089/019/020/029/059/120/123/125/2310986-435-501/ 503/505

61Types

/508/502/523..

Total:610pcs

B13
2.3/ 4.2

B14
3.4/ 5.5

1.200-1.960

0445-120-002/007/008/018/032/103/113/114/208/210

0.02mm/Type

/027/042/082/050/078/081/086/110/170/184/185/224/019/020/029/

39Types

120/123/125/231/0590986-435-501/503/505/508/502/504/520/521/

Total:390pcs

518/523

1.200-1.860

0445-120-002/007/008/018/032/103/113/114/208/210/043/089/027/

0.02mm/Type

042/082/050/078/081/086/110/170/184/185/224/019/020/029/059/1

34Types

20/123/125/231

Total:340pcs

0445-110-068/119/070/105/106/107/108/181/190/266/083/183/231/
291/002

B15

8.300-8.700

0445110002/068/070

0.01mm/Type

0445120018/032/103/113/114/019/020/008

41Types

0986 435 502

Total:410pcs

B16
2.28

0.910-1.400

0445110105/106/107/108/181/190/266/119/083/183/231/291/078/1

0.01mm/Type

02

50Types

0445120027/042/082/059/123/231/029/125/050/078/081/086/110/1

Total:500pcs

70/184/185/224/208/210
0986435504/520/521/022/518/

B17
2.3/ 4

1.200-1.900
0.02mm/Type

0445 120 043/089

36Types
Total:360pcs

B21
3.5/ 6.8

1.000-2.500

095000 5212/5226/5471/5511/6353/6593/6700/

0.05mm/Type

6791/8100/0570/0750/0145/0562/0761/0801/1211

31Types

6140 07L 0127

9709500-890..

Total:310pcs

B22
4.8/ 7.7

0.980-1.440

0445120027/042/082/050/078/081/086/110/170/184/185/224/

0.02mm/Type

86 435 504/520/521/518..

09

24Types
Total:240pcs

B23
3.15/ 5.75

1.000-2.500

095000-5600/5650(16600 EB300/16600 BN821)/5801/7030

0.05mm/Type
31Types
Total:310pcs

B24
1.7/ 3.95

1.000-1.500

0950005212/5226/5471/5511/6353/6593/6700/6791/8100/5600/56

0.02mm/Type

50(16600 EB300/16600 BN821)/5801/7030 6140 07L 0127 97095

26Types

00--890

Total:260pcs

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

32

NANTAI

B25

0.900-1.120

0445110002/068/119/070/105/106/107/108/181/190/266/083/183/2

0.01mm/Type

31/291

19/ 23.5

23Types

0986435001/083/022/078/102/045/047/053/055/158..

Total:230pcs

B26
19.5/ 23

1.340-1.760

0445120027/042/082/050/078/081/086/110/170/184/185/224/..

0.01mm/Type

0986 435 504/520/521/518

44Types
Total:440pcs

B27
21.5/ 24.3

1.500-1.720

095000 5212/5226/5471/5511/6353/6593/6700/

0.01mm/Type

6791/8100/5600/5650(16600 EB300/16600 BN821)/5801/7030 61

23Types

40 07L 0127 9709500--890

Total:230pcs

B31
10.5/ 15.7

1.200-1.300

0445 110 002/068/119/266..

0.01mm/Type

0986 435 001/083/022..

11Types
Total:110pcs
1.155-1.265

B37

0445110083/183/291..

0.01mm/Type
12Types

2.7

Total:120pcs

6. Other model(Original parts)

Bosch original injector

Bosch common rail pump

Manager: Jun gang Hou (Mr.hou)

DENSO original injector

DNESO common rail pump

Mobile: +86-15864752393

DELPHI injector

CAT injector

MSN/SKYPE: taianchina@hotmail.com

33

NANTAI

Ultrasonic cleaner

Digital Timer and Heater

Mechanical Timer and Heater

Digital Timer and Heater


(Adjustable power)

Stainless steel Ultrasonic Cleaner parameter table


Mechanical

AR-08

AR10

AR20

AR30

AR40

AR60

AR80

AR100

Digital

AR08A

AR10A

AR20A

AR30A

AR40A

AR60A

AR80A

AR100A

Ultrasonic
power

70W

70W

120W

180W

240W

360W

480W

600W

Heating power

70W

70W

120W

180W

240W

360W

480W

600W

Tank
capacity(L)

1.3L

2.0L

3.2L

6.5L

10L

15

22L

30L

N.W.(KG)

2.0

2.5

3.5

5.0

5.0

10

13

16

Timer
Digital
control
Manager: Jun gang Hou (Mr.hou)

1-30 min. adjustable, mechanical control knob, timing control


Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

34

NANTAI

Temp
Control

Mechanical

1-30 min. adjustable, digital LCD display, microcomputer control buttons

Digital

20-80 adjustable, mechanical control knob

Mechanical

20-80 adjustable,digital LCD display, microcomputer control buttons

Vibrator

BLT (BOLTED LANGEVIN TRANSDUCER)

Ultrasonic
frequency

40kHz

Power supply
Material
basket

AC100V~120V,50/60Hz;

AC220~240V,50/60Hz

SUS304 stainless steel tank


Optional

Tools for different Pumps


Such as PQ400 Double springs Nozzle tester, PS400A NOZZLE TESTER ,Tools for PW pumps , ABZ PUMPS,
VE PUMPS , P TYPE PUMPS P7100 P3000 ,TOOTHED BAR GAGUE PRE-TRAVEL GAGUE
MULTI-FUNCTIONS ROTATIONAL TOOLS etc same as the pictures in our website: www.nantai-china.com

NO.901 (I,II,III) General Tool

NO.902 P type pump Tools

NO.903 VE pump Tool

NO.904 Tooth bar Travel Tester

NO.905Tooth bar travel rulers

NO.906 Pre-Travel Gauge

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

35

NANTAI

NO.907 VE pump Piston Journey


tester and VE pump Pressure
tester

NO.908PN, Pw, PB Tool

NO.909 P7 pump Tool

NO.910 Cummins LAMA

NO.911 MW Maintainer
Tools(3pcs)

NO.912 P8500 Maintainer(6)


M12X1.5

NO.913For Imported Pump


Maintainer(6)
M12X1

NO.914
Pump(6)

For

Imported

M12X1

NO.915 BOSCH P3000 or


HENGYANGP7100(6)
M10X1

NO.916 LONG PUMP P7100(6)


M10X1

NO.917 MORE USED ON


LONG PUMP(6)
M10X1

NO.918 CHONGYOU PUMP(6)


M12X1.5

NO.919 MORE USED LONG


PUMP(6)
M14X1.5

NO.920 WEIFU P2000(6)


11.7

NO.921 P TYPE PUMP(6)


10.3

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

36

NANTAI

NO.922 P TYPE PUMP(6)


12.3

NO.923
P7100,PW2000,BEIYOU
PUMP(6)
11.7

NO.924 BOSCH P8000(6)


11.7

NO.925 CHONGYOU PUMP(6)


M12X1.5

NO.926 P TYPE PUMP(6)


11.5

NO.927 CHONGYOU PUMP, IT


INSTEAD OF NO.918(6)
10.3

NO.928 LONG PUMP, IT INSTEAD


OF NO.919(6)
12.3

NO.929 BOSCH PUMP


Maintainer (6PCS/SET)

NO.930 KINDS OF A TYPE


PUMP(6PCS/SET)

NO.931 ZEXEL Maintainer

NO.932 PE Pump Depressor

NO.933 VE Pump Elements

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

37

NANTAI

NO.934 AO VEI Tool

NO.935 Disassemble Benz


Pump tools

NO.936 Five-flowers Wrench

NO.937. Disassemble P9 pump


Tool

NO.938 Disassemble
Flyweight Tool

NO.939 Tear-Open Advance


Device Screw

NO.940 Fuel Injection Rotating


Tools

NO.941 6112, 4112 LAMA

NO.942Slide bars for


disassemble injectors

NO.943Caterpillar -Tool

NO.944STEYR SLEEVE

NO.945 Small Stopper

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

38

NANTAI

NO.946 JETTA TOOL ( Three


Wrench)

NO.947 Pump Scratcher

NO.949 P type pump Clip Tool

NO950:Caterpillar-Tool
Injection Tool

NO.951:Caterpillar-Tool

NO.952: Caterpillar-Tool

NO.953 5M pump Socket


Tools

NO.954: 5M pump Tool

NO.955: 6110 Tear-Tool Gear Tool

NO956: Caterpillar Flange

No957: PLUNGER CLIP

No958 :P-type plunger retainer


clamp

NO.959 for dismounting of


different type injector

NO.960
P7100,P2000
multifunction support

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

NO.948 Tear open


P3000.P2000 P7100 Bearing
Scratcher

MSN/SKYPE: taianchina@hotmail.com

39

NANTAI

Company profile
Taian Nantai Experimental Equipment Co., Ltd., located in Tianyuan Street Economic Development Zone Taian
City Shandong Province P.R. China, is the leading manufacturer specializing in producing the Diesel Fuel Injection
System Tester in China, is available for Traditional diesel fuel injection pump test bench, PT-CUMMINS pump and
injectors Test stand, EDC( Electronic Diesel Controler), CR( Common Rail pump Tester) , CRI(Common Rail Injectors
Tester), Nozzle Tester,and many spare parts of Pumps.

The Diesel fuel injection pump adopts the variable-frequency and variable-speed technique, which is divided into
four series-12PSB series, NT2000 series, NT2001 series and NT3000 series, and there are over thirty kinds of test
stands with a complete type and size, which can meet all kinds of users' demands to equipment. Its production process
is advanced. Its technique has ranked the International leading level.

The company's research and development capabilities are rich and the test measure is complete, and reward the
ISO9001-2000 CERTIFICATE and CE certificate. Taian Nantai Experimental Equipment Co., Ltd. has a strict internal
management and has established a complete and reliable quality assurance system. The company's product sale
network has spread all over the country. The after-sales service of product has a system of its own, which can provide
the best service for users timely. The company's aim is "honest and trustworthy operation and brazing new trails in
science and technology".

Manager: Jun gang Hou (Mr.hou)

Mobile: +86-15864752393

MSN/SKYPE: taianchina@hotmail.com

40

You might also like