Platerite 8600Sl: Thermal Plate Recorder
Platerite 8600Sl: Thermal Plate Recorder
Platerite 8600Sl: Thermal Plate Recorder
PlateRite 8600SL
Thermal Plate Recorder
CTP
The PlateRite 8600SL is suitable for use with a wide range of plate
drum design. This makes it possible for the drum to spin at high
required.
370 mm (14.6")
x 370 mm (12"
x 14.6") can be
940 mm (37")
supported.
304 mm (12")
450 mm (17.8")
1,150 mm (45.2")
Single-cassette autoloader
SA-L8800II*
Supplies up to 100 plates automatically
SA-L8800II
PlateRite
8600SL
AT-M800
01
Multi-cassette autoloader
MA-L8800II*
Supplies up to 500 plates automatically
MA-L8800III
Plate processsor
Multi-bridge
AT-M8001
Bridge for transporting exposed plates
* An autoloader connection kit is required.
Stacker
Stacker
CtP
Mac DTP
Windows DTP
Printing press
Trueflow SE Rite
LabProof SE
1-bit TIFF
1-bit TIFF
LabProof SE
result, proofs that are remarkably similar to the final printed output
Spekta 2
a growing business.
Screening lineup
Output formats
ProofPDF, CMYK TIFF, PDF/X-1a*, DotTIFF*, PPF(CIP3)*
Option
AM Screening
FM Screening
Spekta 2 Screening
Dimensions
B
mm
inches
A
1,302
51.3"
B
1,295
51"
C
2,440
96.1"
External drum
64-channel laser diodes
Maximum 1,150 x 940 mm (45.2" x 37"); Minimum 450 x 370 mm (17.8" x 14.6")*1, *2
Maximum 1,150 x 920 mm (45.2" x 36.2"); Minimum 450 x 350 mm (17.8" x 13.8")*2, *3, *4
Thermal plates
0.15 to 0.3 mm (6 to 11.8 mil)
1,200*5/2,400/2,438/2,540 dpi
5 microns*6
22 plates/hr (1,030 x 800 mm/40.5" x 31.4" plates) at 2,400 dpi*7
F-PIF
Semiautomatic loading (standard), Fully automatic loading (optional), Rear delivery kit (optional), Processor bridge (optional)
SCREEN, Heidelberg, Protocol, Komori, and others*8
Valuable management tool
Main unit: 2,440 x 1,295 x 1,302 mm (96.1" x 51" x 51.3"); Blower unit: 693 x 675 x 550 mm (27.3" x 26.6" x 21.7")
Main unit: 1,150 kg (2,530 lb); Blower unit: 85 kg (187 lb)
Main unit: Single phase 220 V to 240 V, 32A, 4 kW (Approved UL, CSA, Declared CE)
(SA-L, MA-L, AT-T, AT-M, and blower unit are powered by main unit.)
Recommended: 21 to 25C (69.8 to 77F); Required: 18 to 26C (64.4 to 78.8F); Relative humidity: 40 to 70% (no condensation)
*1. Compatible with 304 x 370 mm (12" x 14.6") plate sizes as a option. *2. Th e width of plate is between 570 mm and 624 mm can not be used.
*3. Only 12-mm leading edge clamps are available. Trailing edge clamps are available in 12-mm and 8-mm sizes. (Productivity is reduced when 8-mm trailing clamps are used.)
*4. Minimum exposure size 304 x 346 mm (12" x 13.7") with option. *5. 1,200 dpi uses 2,400 dpi double dots. *6. Over four consecutive exposures on one plate at 23C (73.4F) and 60% relative humidity.
*7. Productivity may vary depending upon media sensitivity. *8. Required the registration punch option, when press punch installed.
Registration Punch
Signal tower
Air ltering unit
*1. Required the registration punch option, when press punch installed.
HEAD OFFICE
s 4ERANOUCHI
AGARU
CHOME (ORIKAWA
DORI +AMIGYO
KU +YOTO
*APAN0HONE
&AX
s 4HIS BROCHURE WAS MADE USING 30%+4! SCREENING
SCREEN (USA)
s 4OLLVIEW $R 2OLLING -EADOWS ), 53!0HONE
&AX
WWWSCREENUSACOM