6416 DSK Quickstartguide PDF
6416 DSK Quickstartguide PDF
6416 DSK Quickstartguide PDF
+5V Universal
Power Supply
TMS320C6416 DSK
Technical Reference
AC Power
Cord
USB Cable
System Requirements
Description
http://support.spectrumdigital.com
support@spectrumdigital.com
Page 1 of 4
www.spectrumdigital.com
1.
2.
3.
4.
5.
1.
2.
USB connector
(Plugs into USB
Hub, or port on
PC/Laptop)
USB Cable
ON
USB connector
(Plugs into DSK)
SW3
Jumpers
Power supply
S1
0
0
LEDs
Switches
3.
6.
Make sure your DSK CD-ROM is installed in your CDROM drive. Now connect the DSK to your PC using
the included USB. After few seconds Windows will
launch its "Add New Hardware Wizard" and prompt
for the location of the DSK drivers.
7.
508036-4001B
T:281.494.4505, F:281.494.5310
Page 2 of 4
www.spectrumdigital.com
If you want to test your DSK and USB connection you can
launch the C6416 DSK Diagnostic Utility from the icon on
your desktop.
From the diagnostic utility, press the start button to run the
diagnostics. In approximately 30 seconds all the on-screen
test indicators should turn green.
The 6713 DSK hardware can be registered using the online registration process at www.spectrumdigital.com.
Spectrum Digital, Inc. warrants the products it produces
for one (1) year after the date of purchase. For a product
to be considered "in warranty", Spectrum Digital must be
notified of the defect within one (1) year after being
purchased from Spectrum Digital or one of its authorized
resellers. Spectrum Digital is not responsible for accidents,
improper installation of connections, misuse, neglect or
unauthorized modifications. If the product qualifies for
warranty repair Spectrum Digital may repair or replace the
product at its discretion.
Related Documentation
2.
3.
c:\CCStudio_v3.1\docs\pdf\release_ccs_full_master.ht
ml
C:\CCStudio_v31.\docs\hlp\c6416dsk.hlp
4.
508036-4001B
T:281.494.4505, F:281.494.5310
Page 3 of 4
www.spectrumdigital.com
Error Messages
1.
2.
3.
4.
5.
1.
Message:
Failed: Requires Win98, Win2K or Win XP.
Problem: Your operating system does not support
USB.
2.
Message:
Failed: USB device is NOT enumerated or plugged in.
Problem: Windows cannot find the DSK. Check
power and USB Cable.
3.
Message:
Failed: Load USB Application.
Problem: Loader could not download the DSK
emulation application. The on-board emulation
controller could be in a bad state. Cycle power on the
DSK.
4.
Message:
Failed: USB Channel in use by another app.
Problem: Another application is using the DSK USB
communication channel. Only one application is
allowed to communicate to the DSK over the USB
channel at the same time. Check for active
applications using the Windows Task Manager if open
application is not obvious.
5.
Message:
Waiting for USB Enumeration.
Status: This is a status message which indicates that
Code Composer Studio is waiting for communication
with the on-board JTAG emulator to be established.
This should take less than 10 seconds. Do not hit the
close button unless it is clear that something is wrong
(the progress bar runs forever).
508036-4001B
T:281.494.4505, F:281.494.5310
Page 4 of 4
www.spectrumdigital.com