Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 46 views

    SKF 729659 C: Electric Hot Plate

    Uploaded by

    reinaldosidejunior
    SKF 729659 c ELECTRIC HOT PLATE is intended for heating bearings and other machinery components prior to mounting. Hot plate has a maximum temperature of 200 degC (390 degF) and is equipped with a lid for retaining the heat, at the same time dirt is prevented from entering the bearing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SKF 729659 C: Electric Hot Plate

    Uploaded by

    reinaldosidejunior
    46 views6 pages
    SKF 729659 c ELECTRIC HOT PLATE is intended for heating bearings and other machinery components prior to mounting. Hot plate has a maximum temperature of 200 degC (390 degF) and is equipped with a lid for retaining the heat, at the same time dirt is prevented from entering the bearing.

    Original Title

    mp509e

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    SKF 729659 c ELECTRIC HOT PLATE is intended for heating bearings and other machinery components prior to mounting. Hot plate has a maximum temperature of 200 degC (390 degF) and is equipped with a lid for retaining the heat, at the same time dirt is prevented from entering the bearing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    46 views6 pages

    SKF 729659 C: Electric Hot Plate

    Uploaded by

    reinaldosidejunior
    SKF 729659 c ELECTRIC HOT PLATE is intended for heating bearings and other machinery components prior to mounting. Hot plate has a maximum temperature of 200 degC (390 degF) and is equipped with a lid for retaining the heat, at the same time dirt is prevented from entering the bearing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 6

    SKF 729659 C

    Electric Hot Plate


    Instructions for use
    EU-DECLARATION OF CONFORMITY
    We, SKF Maintenance Products, Constructieweg 7,
    3641 SB MIJDRECHT, The Netherlands, declare that the
    ELECTRIC HOT PLATE
    729659 C and
    729659 C/110V
    are designed and manufactured in accordance with
    EUROPEAN LOWVOLTAGE DIRECTIVE 73/23/EEC
    EMC NORM 89/336/EEC
    The Netherlands, 1 January 2001
    Magnus Rydin
    Manager Product Development and Quality
    1. Introduction
    The SKF electric hot plate 729659 C is intended for heating bearings
    and other machinery components prior to mounting. It is suitable for
    components with a bore of up to approximately 100 mm (4 inch) or with
    a weight of up to 3 -4 kg.
    The hot plate has a maximum temperature of 200 C (390 F) and is
    equipped with a lid for retaining the heat, at the same time dirt is
    prevented from entering the bearing.
    2. Description
    The electric hot plate 729659 C consists of a heating plate
    housed in a metal casing with removable cover.
    The temperature is controlled by means of a thermostat.
    2.1 Technical data
    Voltage : 230 V, 50/60 Hz or 115 V, 50/60 Hz
    Power : 1.000 W
    Temperature range : 50 - 200 C (120-390 F)
    Temperature accuracy : better than 10 C (18 F)
    Plate dimensions : 380 x 178 mm (15 x 7 in)
    Height of lid : 50 mm (2 in)
    Outside dimensions : 400 x 240 x 130 mm (16 x 10 x 5 in)
    Length of connection cable : 2 m (6,6 ft)
    Weight : 4,7 kg (10 lb)
    Designation : 729659 C (230 V model)
    729659 C/110V (115 V model)
    Lid
    Thermostat
    Heater indication lamp
    Power switch
    SKF 729659 C 3
    3. Operating instructions
    a) Make sure the voltage marked on the heater corresponds with
    the one available from the main supply.
    b) Connect the heater to the power supply. For certain markets the
    correct plug might have to be attached in order to fit the electrical
    socket.
    c) Set the thermostat to the required temperature. Recommended
    temperature for bearings is 110 C (230F).
    d) Turn the unit on by pressing the ON/OFF switch. Main pilot lamp
    will light up.
    e) The second pilot lamp is lit while the hot plate is being heated but
    switches off as soon as the selected temperature has been reached.
    f) The temperature of the hot plate will remain within 10 C (18 F) of
    the selected value.
    4. Safety features
    For increased safety the SKF hot plate is equipped with overheating
    protection. This will automatically switch off the power in case of
    thermostat failure.
    5. Spare parts
    Designation Description
    729659 C-1 Heating plate, incl. thermostat and
    overheating protection
    729659 C-3 Power switch
    729659 C-4 Heating indication lamp
    729659 C-5 Overheating protection
    SKF 729659 C 4
    Safety recommendations
    The operating instructions should always be followed.
    Make sure the supply voltage is correct.
    Always make sure the heater is securely connected to earth.
    The heater should not be used in areas where there is a risk for
    explosion.
    Never enter the heater body via venting slots/holes.
    Do not expose the heater to high humidity.
    Never modify the heater.
    All repair work should be taken care of by a SKF repair shop.
    SKF 729659 C 5
    In line with our policy of continuous development of
    our products we reserve the right to alter any part of the
    above specification without prior notice.
    Although care has been taken to ensure the accuracy of
    this publication, SKF does not assume any liability for errors
    or omissions.
    SKF Maintenance Products
    Copyright SKF 2001/07 www.mapro.skf.com
    M
    P
    5
    0
    9
    E

    You might also like