This document summarizes the Sharp GP2U06 dust sensor. It is a compact, thin, and low power dust sensor that can detect particles as small as 0.02mg/m3. It has high sensitivity, with an output of 0.5V per 0.1mg/m3 of dust detected. The sensor is 58x38x25mm in size and operates on 5V with a maximum power consumption of 15mA. It is suitable for use in air purifiers and air conditioners due to its small size and low power use.
This document summarizes the Sharp GP2U06 dust sensor. It is a compact, thin, and low power dust sensor that can detect particles as small as 0.02mg/m3. It has high sensitivity, with an output of 0.5V per 0.1mg/m3 of dust detected. The sensor is 58x38x25mm in size and operates on 5V with a maximum power consumption of 15mA. It is suitable for use in air purifiers and air conditioners due to its small size and low power use.
This document summarizes the Sharp GP2U06 dust sensor. It is a compact, thin, and low power dust sensor that can detect particles as small as 0.02mg/m3. It has high sensitivity, with an output of 0.5V per 0.1mg/m3 of dust detected. The sensor is 58x38x25mm in size and operates on 5V with a maximum power consumption of 15mA. It is suitable for use in air purifiers and air conditioners due to its small size and low power use.
This document summarizes the Sharp GP2U06 dust sensor. It is a compact, thin, and low power dust sensor that can detect particles as small as 0.02mg/m3. It has high sensitivity, with an output of 0.5V per 0.1mg/m3 of dust detected. The sensor is 58x38x25mm in size and operates on 5V with a maximum power consumption of 15mA. It is suitable for use in air purifiers and air conditioners due to its small size and low power use.
Compact and Thin Type Dust Sensor for Detecting Particles
Sharp's GP2U06 is dust sensor which integrated optical sensor portion and signal amplifier portion. It is suitable for indoor air purifier sensor because of compact, thin, low dissipation current type. (1) Compact, thin type (58 x 38 x 25mm) (2) High sensitivity (Dust detecting sensitivity : TYP.0.5V/(0.1mg/m 3 ) (3) Can detect dust even in low density area (Minimum particle density : TYP. 0.02mg/m 3 ) (4) Operating voltage : 5V (5) Low dissipation current (Icc : MAX. 15mA) Tec.U970502 (1) Air purifiers (2) Air conditioners V Vcc Operating supply voltage 50.5 Parameter Symbol Ratings Unit Vcc V Input terminal voltage VLED V Operating temperature C Storage temperature C Remarks - Supply voltage -0.3 to +7 -0.3 to +Vcc -10 to +65 -20 to +80 Topr Tstg Terminal configuration 1 2 3 4 Output terminal GND Emitting device operating terminal Vcc 58 3 8 9 3.2 Connector 1 2 3 4 Detecting window 2 5 (Unit : mm) Outline Dimensions General Description Features Applications Absolute Maximum Ratings (Ta=25C) (Notice) In the absence of device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP device shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Specifications are subject to change without notice for improvement. (Internet) Data for SHARP's optoelectronic/power device is provided on internet. (Address http://www.sharp.co.jp/ecg/) Symbol Ratings Unit Remarks - - - Open drain input GP2U06 Tec.U970502 Conditions MIN. TYP. MAX. Unit Detecting sensitivity K *1, 2 V/(0.1mg/m 3 ) Output voltage (no dust) *2 V Range of output voltage V OH RL=4.7k LED operating current mA Dissipation current mA V OC I LED I CC 0 3.2 0.5 0.35 0.65 0.5 15 10 1.0 20 15 V LED terminal=0V *2 RL= *2 Input condition to LED terminal Recommended input conditions to LED terminal Vcc R1 R3 C1 R2 R4 Tr LED + GP2U06 2 T=30ms T=305ms PW=0.40.1ms Pw=0.4ms Detecting window Dust Photodiode circuit Emitting circuit Amp. Amp. Peak hold circuit Operation circuit Sensitivity adjustment Vcc Output terminal(Vo) GND 3 2 1 4 Emitting device Operating terminal Parameter Symbol Electro-optical Characteristics Block Diagram (Ta=25C, Vcc=5V) High Sensitivity Dust Sensor - - - - As of May 1997 *1 Dust density is measured by mildseven smoke density, using digital dust meter [P-5L2 made by SHIBATA scientific instrumental industry]. Detecting sensitivity is settled according to the change of output voltage when dust density change 0.1mg/m 3 from the initial value. *2 Input conditions to LED terminal (pulse operation condition) is shown in the right figure. This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.