Nothing Special   »   [go: up one dir, main page]

Install Top Win 7

Download as pdf or txt
Download as pdf or txt
You are on page 1of 9
At a glance
Powered by AI
The document provides instructions for installing the driver on Windows 7, Windows 8, and Windows XP. It also describes what to do if there are errors in the USB driver.

You need to run Setup.exe as Administrator, select the language, click Next and Finish to restart the computer, and then connect the programmer for the driver to install correctly.

You should open the Device Manager, find the device with the error mark, right click and update the driver, and manually select the driver path if the automatic update does not work.

Install TopWin7 TopWin7 support for system System/bits Windows8 Windoes7 Win xp NOTE: 32 bitx86 Yes Yes Yes

64 bit (x64) Yes (Dis Signature) Yes -

Dont connect programmer before installing software.

For Windows7 (1) Run Setup.exe as Administrator

(2) When inter Setup windowSelect language Intl English,then click [OK];

(3) Click [Next], Complete all the step. Finally click [Finish] will Automatically restart computer. (4) Connect TOP Programmer, System will find the driver and load it.The device show in Device Manager window as:

The driver loaded and you can run TopWin.exe now. Win7 USB Troubleshoot If there is an error in USB driver you can correct it step by step:
1

l l

Open [Device Manager] window; Find the device line with a !,(it is an error) in Device Manager window:

l l l l

Click right key of mouse,select update driver; Select Auto...,and wait a while Reset computer; Connect TOP Programmer, System will find the driver and load it.may be you need reset computer again. l The device show in Device Manager window as:

Driver software path C:\Top\Topwin7\Driver_x64/32 NOTE: Dont connect programmer when setup.

For Windows8(x86 32bit) Win8 32-bit systems compatibility is better than the 64-bit system, to install the driver is relatively simple. (1) Run Setup.exe as Administrator

(2) When inter Setup windowSelect language Intl English,then click [OK];

(3) Click [Next], Complete all the step. Finally click [Finish] will Automatically restart computer. (4) Connect TOP Programmer, System will find the driver and load it.The device show in Device Manager window as:

The driver loaded and you can run TopWin.exe now. Win8x32 USB Troubleshoot If there is an error in USB driver you can correct it step by step: l Open Device Manager window: l Find the device line with a !,(it is an error) in Device Manager window:

l l

Click right key of mouse,select update driver; Dont Select Auto,You must load usb driver form [disk].You had to input the path: C:\Top\Topwin7\Driver_x32
3

Click [OK].and wait a while. l Reset computer; l Connect TOP Programmer, System will find the driver and load it.may be you need reset computer again. l The device show in Device Manager window as:

Driver software path C:\Top\Topwin7\Driver_x32 Not support Win8 x64 ,we will support Win8 x64 soon.. NOTE: Dont connect programmer when setup.

For Windows8(x64 64bit) (1) Run Setup.exe as Administrator

(2) When inter Setup windowSelect language Intl English,then click [OK];

(3) Click [Next], Complete all the step. Finally click [Finish] will Automatically restart computer. After the computer restarts, the bottom corner of the screen displays "Test Mode". (4) Open Device Manager

(5) Connect the programming device, Device Manager will add a line "Unknown Device", because the system has not found the driver.The device displays "!" (Yellow exclamation mark). Mouse to select the line, right click and update the driver:
5

(6) Click [Browse] to select the folder where the driver c:\top\topwin7\driver_x64

(7) Click "Install this driver software anyway"

(8) Already successfully installed the driver files.

(9) Re-open the Device Manager, in the "Universal Serial Bus devices" has been shown "TOP_103". Device can have a normal use.

OK,the driver loaded.

For Windows XP 1 Run Setup.exe; 2When inter Setup windowSelect language Intl English,then click [OK];

3 4 5

Click [Next], Complete all the step. Finally click [Finish]. Reset computer; Connect TOP Programmer, System will find the driver and load it.The device show in Device Manager window as:

The driver loaded and you can run TopWin.exe now. (WinDriver vession is 10.2.1.0 )

WinXP USB Troubleshoot If there is an error in USB driver you can correct it step by step: l Open Device Manager window: l Find the device line with a !,(it is an error) in Device Manager window:

Dont Select Auto,You must load usb driver form [disk].You had to input the path: For Top Programmer is C:\Top\Topwin7\Driver_xp\ TopUSB3.inf; For WinDriver is C:\Top\Topwin7\Driver_xp\ windriver6.inf. You had to update both two lines. l Click [Next], Complete all the step. Finally click [Finish] will Automatically restart computer.
8

Connect TOP Programmer, System will find the driver and load it.may be you need reset computer again. l The device show in Device Manager window as:

OK,the driver loaded. Driver software path C:\Top\Topwin7\Driver_xp NOTE: Dont connect programmer when setup.

You might also like