SPECIFICATIONS

Net Power Bucket Range Operating Weight

SAE J1349 / 171 HP 0.39 m³ - 1.05 m³ 17,800 kg (39,240 lb)
(127 kW) at 1,800 rpm 0.51 yd³ - 1.37 yd³

HW180
Standard Bucket
0.76 m3 (0.99 yd3)

Tier 4 Final Engine

ENGINE
Maker / Model Cummins QSB6.7
Water-cooled, 4-cycle diesel,6-cylinder
Type in-line, Direct injection, Turbocharged,
Charge air cooled, Low emission
Rated flywheel J1995 (gross) 180 HP (134 kW) at 1,800 rpm
SAE
horse power J1349 (net) 171 HP (127 kW) at 1,800 rpm
Max. torque 74.7 kgf.m (620 lbf.ft) at 1,500 rpm
Bore × stroke 107 x 124 mm (4.21” x 4.88”)
Piston displacement 6,700 cc (409 in3)
Batteries 2 x 12 V x 100 Ah
Starting motor 24 V - 4.8 kW
Alternator 24 V - 95 Amp

HYDRAULIC SYSTEM
MAIN PUMP
OPERATING WEIGHT (APPROXIMATE)
Type Two variable displacement piston pumps
Operating weight, including 5,200 mm (17’ 1”) mono boom, 2,600 mm (8’ 6”) arm,
Max. flow 2 X 172 ℓ/min (45.4 US gpm)
SAE heaped 0.76 m3 (0.99 yd3) backhoe bucket, lubricant, coolant, full fuel tank,
Sub-pump for pilot circuit (Gear Pump) 33 ℓ/min (8.7 gpm) hydraulic tank and the standard equipment.

CROSS-SENSING AND FUEL-SAVING PUMP SYSTEM OPERATING WEIGHT

HYDRAULIC MOTORS Undercarriage Mono boom Hyd. 2-Piece boom
Variable displasement pistons motor 17,800 kg 18,270 kg
Travel Rear dozer blade
with brake valve (39,240 lb) (40,280 lb)
Swing Axial piston motor with automatic brake 17,950 kg 18,420 kg
Rear outrigger
(39,570 lb) (40,010 lb)
RELIEF VALVE SETTING Front outrigger and 18,750 kg 19,220 kg
Implement circuits 400 kgf/cm2 (5,690 psi) rear blade (41,340 lb) (42,370 lb)
Travel 380 kgf/cm2 (5,400 psi) Front blade and 18,800 kg 19,270 kg
rear outrigger (41,450 lb) (42,480 lb)
Power boost (boom, arm, bucket) 380 kgf/cm (5,400 psi)
2

18,900 kg 19,370 kg
Swing circuit 285 kgf/cm2 (4,050 psi) Four outrigger
(41,670 lb) (42,700 lb)
Pilot circuit 40 kgf/cm2 (570 psi)
Service valve Installed SWING SYSTEM
HYDRAULIC CYLINDERS Swing motor Fixed displacement axial pistons motor

Boom: 2-115 x 1,090 mm (4.5” x 42.9”) Swing reduction Planetary gear reduction

Arm: 1-120 x 1,355 mm (4.7” x 53.3”) Swing bearing lubrication Grease-bathed

Bucket: 1-110 x 995 mm (4.3” x 39.2”) Swing brake (option) Multi wet disc (pin lock type)
No. of cylinder Swing speed 9.3 rpm
Blade: 2-110 x 235 mm (4.3” x 9.3”)
bore X stroke
Outrigger: 2-125 x 463 mm (4.9” x 18.2”) SERVICE REFILL CAPACITIES
2-PCS boom: 2-115 x 960 mm (4.1”x 37.8”)
Re-filling liter US gal
Adjust (boom):1-160 x 650 mm (6.29”x 25.6”)
Fuel tank 290 76.6
DRIVES & BRAKES Engine coolant 19.5 5.2

4-wheel hydrostatic drive. Constant mesh, helical gear transmission provides 2 for- Engine oil 23.7 6.3
ward and reverse travel speeds. Swing device - gear oil (OPT) 6.2 1.64
Max. drawbar pull 10,320 kgf (22,750 lbf) Swing device - greese (OPT) (1.2) (0.32)
1st 5.9 km/h Front 15.5 4.11
Travel speed Axle
2nd 21.7 mph Rear 17.5 4.6
Gradeability 30º (70 %) Hydraulic system (including tank) 270 71.3
Service Brake : Hydraulic tank 125 32.8
- Independent dual brake, front and rear axle full hydraulic power brake. DEF/AdBlue® 27 7.1
- Spring released and hydraulic applied wet type multiple disc brake.
Parking Brake : UNDERCARRIAGE
- Spring applied and hydraulic released wet disc brake type in transmission.
Reinforced box-section frame is all-welded, low-stress.
Dozer blade and outriggers are available. A pin-on design.
CONTROL
Ideal for leveling and back filling or
Pilot pressure operated joysticks and pedals with detachable lever provide almost Dozer blade
clean-up work.
effortless and fatigueless operation.
Required for max. operation stabillity
Two joysticks with one safety lever
Outrigger when digging and lifting. Can be
Pilot control (LH): Swing and arm,
mounted on the front/or the rear.
(RH): Boom and bucket (ISO)
 I
E

HW180
D (D’)

J K
F J’

C
HW180 DIMENSIONS Unit: mm (ft·in) G

5.2 m (17' 1") Mono boom, 2.6 m (8' 6") Arm, Rear dozer H A
B

A Wheel base 2,600 (8' 6") Boom length 5,200 (16' 9")
B Overall width 2,500 (8' 2")
Arm length 2,200 (7' 3") 2,600 (8' 6") 3,100 (10' 2")
C Ground clearance of counterweight 1,270 (4' 2")
D Rear-end distance 2,430 (8' 0") Overall length
I 8,590 (28' 2") 8,710 (28' 7") 8,480 (27' 10")
(Traveling position)
D’ Rear-end swing radius 2,430 (8' 0")
Overall length
E Upperstructure width 2,475 (8' 1") I' 8,650 (28' 5") 8,760 (28' 9") 8,760 (28' 9")
(Shipping position)
F Overall height of cab 3,190 (10' 6") Overall height of boom
G Min. ground clearance 340 (1' 1") J 3,610 (11' 10") 3,540 (11' 7") 3,900 (12' 10")
(Traveling position)
H Tread 1,944 (6' 5") Overall height of boom
J' 3,060 (10' 0") 3,180 (10' 5") 3,150 (10' 4")
K Overall height of guardrail 3,420 (11' 3") (Shipping position)

HW180 WORKING RANGE Unit : mm (ft·in) A'

5,200
Boom length
(17' 1")
2,200 2,600 3,100
Arm length
(7’ 3”) (8’ 6”) (10’ 2”)
8,820 9,200 9,450 D
A Max. digging reach
(29’ 1”) (30’ 3”) (31’ 0”)
E
8,615 9,000 9,250
A’ Max. digging reach on ground
(28’ 4”) (29’ 7”) (30’ 4”)
5,500 5,900 6,320
B Max. digging depth
(18’ 2”) (19’ 5”) (20’ 9”)
5,280 5,700 6,130
B’ Max. digging depth (8' level)
(17’ 5”) (18’ 9”) (20’ 1”)
4,850 5,310 5,470 B B' C
C Max. vertical wall digging depth
(16’ 1”) (17’ 6”) (17’ 11”)
9,180 9,300 9,220
D Max. digging height
(30’ 3”) (30’ 7”) (30’ 3”)
6,520 6,660 6,620 8ft
E Max. dumping height
(21’ 5”) (21’ 8”) (21’ 9”)
3,290 3,230 3,160
F Min. swing radius
(10’ 9”) (10’ 8 ”) (10’ 4”)

DIGGING FORCE
Length mm (ft.in) 2,200 (7' 3") 2,600 (8' 6") 3,100 (10' 2")
Arm
Weight kg (lb) 750 (1,650) 810 (1,790) 890 (1,960)
kN 98.1 [106.5] 98.1 [106.5] 107.9 [117.2]
SAE kgf 10,000 [10,860] 10,000 [10,860] 11,000 [11,940]
Bucket lbf 22,050 [23,940] 22,050 [23,940] 24,250 [26,330]
digging
force kN 113.4 [123.1] 113.4 [123.1] 123.6 [134.2]
ISO kgf 11,560 [12,550] 11,560 [12,550] 12,600 [13,680] [Power
lbf 25,490 [27,670] 25,490 [27,670] 27,780 [30,160] Boost]
kN 76.0 [82.5] 66.4 [72.1] 69.0 [74.9]
SAE kgf 7,750 [8,410] 9,770 [7,350] 7,030 [7,630]
Arm lbf 17,090 [18,550] 16,930 [16,210] 15,500 [16,830]
crowd
force kN 79.4 [86.2] 69.1 [75.1] 71.4 [77.5]
ISO kgf 8,100 [8,790] 7,050 [7,650] 7,280 [7,900]
lbf 17,860 [19,390] 15,540 [16,870] 16,050 [17,430]

Note : Arm weight includes bucket cylinder, linkage, and pin

HW180
BUCKETS

SAE heaped 0.39 (0.51) 0.50 (0.65) 0.64 (0.84) 0.70 (0.92) 0.89 (1.16) 0.69 (0.90) 0.75 (0.90)
m3 (yd3) 0.70 (0.92) 1.05 (1.37)
0.76 (0.99)

Recommendation mm (ft.in)
Capacity Width
m3 (yd3) mm (in) Weight 5,200 (17’ 1”) Mono Boom 5,100 (16’ 9”) 2-Piece Boom
kg (lb)
SAE CECE Without With 2,200 2,600 3,100 2,200 2,600
heaped heaped side cutters side cutters (7' 3") Arm (8' 6") Arm (10' 2") Arm (7' 3") Arm (8' 6") Arm
0.39 (0.51) 0.34 (0.44) 650 (25.6) 740 (29.1) 410 (900) ● ● ● ● ●
0.50 (0.65) 0.44 (0.58) 790 (31.1) 880 (34.6) 470 (1,040) ● ● ● ● ●
0.64 (0.84) 0.55 (0.72) 950 (37.4) 1,040 (40.9) 510 (1,120) ■ ■ ▲ ■ ■
0.70 (0.92) 0.60 (0.78) 1,020 (40.2) 1,110 (43.7) 600 (1,320) ■ ■ ▲ ■ ▲
0.76 (0.99) 0.65 (0.85) 1,090 (42.9) 1,180 (46.5) 620 (1,370) ■ ▲ ▲ ■ ▲
0.89 (1.16) 0.77 (1.01) 1,250 (49.2) 1,340 (52.8) 610 (1,340) ▲ ▲ - ▲ ▲
1.05(1.37) 0.90 (1.18) 1,430 (56.3) 1,520 (59.8) 680 (1,500) ▲ - - ▲ -
0.69 (0.90) 0.62 (0.81) 1,050 (41.3) - 720 (1,590) ■ ▲ ▲ ■ ▲
0.75 (0.98) 0.65 (0.85) 1,820 (71.7) - 540 (1,190) ■ ■ ▲ ■ ▲
Heavy duty bucket ● : Applicable for materials with density of 2,000 kgf/m (3,370 lbf/yd3) or less
3

Ditch cleaning bucket ■ : Applicable for materials with density of 1,600 kgf/m3 (2,700 lbf/yd3) or less
▲ : Applicable for materials with density of 1,100 kgf/m3 (1,850 lbf/yd3) or less

Lifting Capacity Chart

Boom: 5,200 mm (17') Capacities based on North American Standard
Arm: 2,600 mm (8'5") Configuration in accordance with ISO condition 2 standard.
Bucket: 0.76 m3 (0.99 yd3) SAE heaped Rating over front
CWT 3,150 kg (6,945 lb) Rating over side or 360 degree
Lift-point radius At max. reach

Lift-point
height 1.5 m (4.9 ft) 3.0 m (9.8 ft) 4.5 m (14.8 ft) 6.0 m (19.7 ft) 7.5 m (25 ft) Capacity Reach
m (ft)
m (ft)

7.5 m kg *2,940 *2,940 5.47

(29.5 ft) lb *6,480 *6,480 (17.9)
6.0 m kg *4,230 *4,230 *2,630 *2,630 6.68
(20 ft) lb *9,330 *9,330 *5,800 *5,800 (21.9)
4.5 m kg *5,160 *5,160 *4,510 *4,510 *2,540 *2,540 7.39
(15 ft) lb *11,380 *11,380 *9,940 *9,940 *5,600 *5,600 (24.2)
3.0 m kg *6,490 *6,490 *5,080 *5,080 *3,910 *3,910 *2,580 *2,580 7.74
(10 ft) lb *14,310 *14,310 *11,200 *11,200 *8,620 *8,620 *5,690 *5,690 (25.4)
1.5 m kg *7,650 *7,650 *5,640 5,630 *4,590 4,030 *2,750 *2,750 7.78
(5 ft) lb *16,870 *16,870 *12,430 12,410 *10,120 8,880 *6,060 *6,060 (25.5)
Ground kg *5,530 *5,530 *8,140 *8,140 *5,940 5,510 *3,360 *3,360 *3,090 *2,460 7.53
Line lb *12,190 *12,190 *17,950 *17,950 *13,100 12,150 *7,410 *7,410 *6,810 *5,420 (24.7)
-1.5 m kg *5,750 *5,750 *9,750 *9,750 *7,890 *7,890 *5,770 5,480 *3,740 *3,740 6.94
(-5 ft) lb *12,680 *12,680 *21,500 *21,500 *17,390 *17,390 *12,720 12,080 *8,250 *8,250 (22.8)
-3.0 m kg *10,160 *10,160 *9,610 *9,610 *6,790 *6,790 *4,690 *4,690 5.91
(-10 ft) lb *22,400 *22,400 *21,190 *21,190 *14,970 *14,970 *10,340 *10,340 (19.4)

NOTES:
1. Lifting capacities are based on ISO 10567. 3. The lift-point is the bucket pivot mounting pin on the arm (without bucket mass).
2. Lifting capacities for the HX series do not exceed 75% of tipping load with the 4. (*) indicates load limited by hydraulic capacity.
machine on firm, level ground or 87% of full hydraulic capacity.
 CAB & INTERIOR STD OPT

HW180
Seat
Adjustable air suspension seat with heater ●
Cabin FOPS/FOG
FOPS (Falling Object Protective Structures) - ISO 3449 Level 2 ●
FOG (Falling Object Guard) - ISO 10262 Level 2 ●
Cabin ROPS
ROPS (Roll Over Protective Structures) - ISO 12117-2 ●
ENGINE STD OPT
Cummins QSB 6.7 engine ● SAFETY STD OPT
Battery master switch ●
HYDRAULIC SYSTEM STD OPT
Rearview camera ●
Intelligent Power Control (IPC) AAVM (Advanced Around View Monitoring) ●
3-power mode, 2-work mode, user mode ● Four front working lights (2 boom mounted, 2 front frame mounted) ●
Variable power control ● Travel alarm ●
Pump flow control ● Rear work lamp ●
Attachment mode flow control ● Beacon lamp ●
Engine auto idle ● Automatic swing brake ●
Engine auto shutdown control ● Boom holding system ●
Electronic fan control ● Arm holding system ●
Safety lock valve for boom cylinder with overload warning device ●
CAB & INTERIOR STD OPT
Safety lock valve for arm cylinder ●
ISO Standard cabin Swing Lock System ●
Rise-up type windshield wiper ●
Four outside rearview mirror ●
Radio / USB player ●
Handsfree mobile phone system with USB ● OTHER STD OPT
12 volt power outlet (24V DC to 12V DC converter) ● Booms
Electric horn ● 5.2 m (17' 1") mono ●
All-weather steel cab with 360° visibility ● 5.1 m (16' 9") 2-Piece ●
Safety glass windows ● Arms
Sliding fold-in front window ● 2.2 m (7' 3") ●
Sliding side window (LH) ● 2.6 m (8' 6") ●
Lockable door ● 3.1 m (10' 2") ●
Hot & cool box ● Removable clean-out dust net for cooler ●
Storage compartment & ashtray ● Removable reservoir tank ●
Transparent cabin roof-cover ● Fuel pre-filter ●
Sun visor ● Single ●
●
Fuel warmer
Door and cab locks, one key Dual ●
Mechanical suspension seat with heater ● Self-diagnostics system ●
Pilot-operated slidable joystick ● Mobile ●
Console box height adjust system ● Hi-mate Remote Management System Satellite ●
Cabin lights ● Dual ●
Cabin front window rain guard ● Batteries (2 x 12V x 100 Ah) ●
Cabin roof-steel cover ● Fuel filler pump (50 ℓ/min) ●
Automatic climate control Single-acting piping kit (breaker, etc.) ●
Air conditioner & heater ● Double-acting piping kit (clamshell, etc.) ●
Defroster ● Rotating Piping Kit ●
Starting Aid (air grid heater) for cold weather ● Quick coupler piping ●
Centralized monitoring Quick coupler ●
8" LCD display ● Accumulator for lowering work equipment ●
Engine speed or trip meter/accel. ● Pattern change valve (2 patterns) ●
Engine coolant temperature gauge ● Fine swing control system ●
Max power ● Tool kit ●
Low speed/high speed ● Auto cruiser system ●
Auto idle ● Travel pedal (2way) ●
Overload ●
Check engine ● REAR DOZER BLADE STD OPT
Air cleaner clogging ● Front blade ●
Indicators ● Front - grapple rest, rear - dozer ●
ECO Gauges ● Rear - Dozer blade ●
Fuel level gauge ● Rear - Outrigger ●
Hydraulic oil temperature gauge ● Front blade, rear blade ●
Fuel warmer ● Front outrigger and rear blade ●
Warnings ● Front and rear outrigger ●
Communication error ● Front blade and rear outrigger ●
Low battery ● Tires-dual (10.00 - 20 -16PR tube) ●
Clock ● Tires-dual (10.00 - 20 solid) ●
Fenders (mudguards) ●
* Standard and optional equipment may vary. Contact your Hyundai dealer for more information.
The machine may vary according to International standards. * Materials and specifications are subject to change without advance notice.
* The photos may include attachments and optional equipment that are not available in your area. * All imperial measurements rounded off to the nearest pound or inch.

PLEASE CONTACT

www.hceamericas.com
6100 Atlantic Blvd., Norcross, GA 30071
TEL (678) 823 7777 FAX (678) 823 7778
Made in the U.S.A. 1057-WE-SP 11/2019v2