Timing Belt: Service and Repair Timing Belt Removal and Installation
Timing Belt: Service and Repair Timing Belt Removal and Installation
Timing Belt: Service and Repair Timing Belt Removal and Installation
52 Page 1
CAUTION: After radiator cowling installation, rotate the cooling fan by hand and verify that the fan blade does not touch the radiator cowling. If
the fan touches the cowling, adjust the radiator cowling mounting position.
NOTE:
a) Position the hose clamp in the original location on the hose.
b) Squeeze the clamp lightly with large pliers to ensure a good fit.
INSTALLATION NOTE
Timing Belt
1990 Mazda Truck B Series Truck 2WD L4-2184cc 2.2L 2200 2-bbl Copyright © 2013, ALLDATA 10.52 Page 2
1. Check that the mark on the timing belt pulley is aligned with the matching mark.
2. Check that the #1 mark of the camshaft pulley is aligned with the matching mark. If it is not aligned, turn the camshaft to align.
3. Install the timing belt tensioner and spring. Temporarily secure it with the spring fully extended.
4. Install the timing belt so that there is no looseness at the water pump pulley and idler pulley side.
CAUTION:
a) If the timing belt is being reused, it must be reinstalled to rotate in the original direction.
b) Check that there is no oil, grease, or dirt on the timing belt.
9. Turn the crankshaft twice in the direction of rotation and align the matching marks.
10. Check the timing belt deflection. If the deflection is not correct, repeat the adjustment from step 5 above.
CAUTION: Be sure not to apply tension other than that of the tensioner spring.
Spark Plug