CX210D STD LC EXCAVATOR

STANDARD LONG UNDERCARRIAGE (LC)

TIER 4 FINAL CERTIFIED

DRIVETRAIN ATTACHMENT
Travel control Dual stage relief/ Boom 18 ft 8 in (5.70 m)
counter balance design Arm options:
Brakes Mechanical disc Standard 9 ft 8 in (2.94 m)
Service brakes SAHR disc – each motor Heavy-duty 7 ft 10 in (2.40 m)
Two speed travel: Bucket digging force* 31,923 lbf (142 kN)
Max. high speed 3.5 mph (5.6 km/h) w/ Auto Power-Boost 34,621 lbf (154 kN)
Max. low speed 2.1 mph (3.4 km/h) NOTE: *Digging force ratings based on ISO6015.
Automatic downshift
Drawbar pull 42,264 lbf (188 kN) OPERATING WEIGHT
Gradeability 70% – 35° Slope
Operating weight 48,900 lb (22 200 kg)
ENGINE w/ shoes 2 ft 6.25 in (800 mm)
ELECTRICAL w/ boom 18 ft 8 in (5.7 m)
Model Isuzu AR-4HK1X
w/ arm 9 ft 8 in (2.94 m)
Emissions Certification Tier 4 Final Voltage 24 Volts
w/ bucket 1,433 lb (650 kg)
Fuel Requires ultra-low sulfur fuel Alternator rating 50 amp w/ counterweight 8,640 lb (3 920 kg)
B5 biodiesel tolerant Batteries 2 x 12 Volt NOTE: W/ operator/full fuel/standard equipment.
Type Water-cooled, 4-cycle diesel, Battery reserve capacity 92 Ah/5 hour
high pressure common Work lights – 4 24 Volt/70 watt GROUND PRESSURE
rail system – electric control. 1 boom, 1 upper, 2 cab
VGT Turbocharger w/ air cooled @ Standard operating weight 4.9 psi (0.34 bar)
intercooler, SCR system w/ 31.5 in (800 mm) triple semi-grouser shoes
OPERATOR ENVIRONMENT
Cylinders 4-cylinder in-line
Air conditioner output 18,100 BTU/hr HYDRAULICS
Displacement 317 in3 (5.2 L)
Heater output 20,150 BTU/hr
Bore/Stroke 4.53 x 4.92 in System design Open center
(115 x 125 mm) Sound level inside cab – ISO6396 70 dBA
Main pumps Two-variable displacement/
Fuel injection Direct injection – electronic Electrical outlet 12 Volt axial piston pumps w/ regulating system
Fuel filter Replaceable, Cab interior light 10 watt Max. rated flow x 2 55.7 gpm (211 L/min)
full flow spin-on cartridge Rear view camera Standard System pressures:
Air filter Dry type element Monitor: Boom, arm and bucket 4,975 psi (343 bar)
w/ warning restriction indicator Rear view and side view – optional camera w/ Power Boost 5,410 psi (373 bar)
display; Mode 1: work mode; Travel mode; Travel circuits 4,975 psi (343 bar)
Oil filter Replaceable,
Attachment selection; Auto idle indicator; Swing circuits 4,264 psi (294 bar)
full flow spin-on cartridge
Fuel consumption gauge; Power boost icon; Pilot pump 1 x gear design
Engine gradeability:
Fuel bar graph; Oil temperature bar graph; Max. capacity 4.8 gpm (18 L/min)
Side-to-side 35°
DEF/AdBlue bar graph; Auto glow indicator; Controls w/ boom/arm holding valve
Fore and aft 35°
Auxiliary mode display; Hour meter; Camera Right track travel, 1 x Four-spool section
Net horsepower – SAE J1349 @ 1800 RPM: angle indicator; Mode 2: free swing/swing bucket, boom and
160 hp (119.3 kW) lock indicator; Light icon; Wiper icon; Mute arm acceleration.
Net max. torque – SAE J1349 @ 1600 RPM: icon; Seat belt icon; Warning messages;
Left track travel, 1 x Five-spool section
458 lbf·ft (621 N·m) Time and date; Water temperature bar graph;
auxiliary, swing, boom
Cooling operating range: DEF/AdBlue refill icon; Anti-theft icon; DTC
and arm acceleration.
113° to -4°F (45° to -20°C) indicator; Low output icon; SCR cleaning
icon; SCR warning icons; Freeze protection; Work mode selections SP: Speed Priority
Oil Requires low-ash oil CJ-4 Trip meter; Pressure reading. H: Heavy-Duty
A: Automatic
Seat:
High-back seat w/ heat and air suspension; Swing motor Fixed displacement
Adjustments: 65° tilt, manual weight, seat axial piston
height, headrest, lumbar support, backrest Swing final drive Planetary gear reduction
angle, pivoting armrests linked to consoles;
Travel motor Two-speed independent
Retractable seat belt and control consoles
travel/axial piston
adjust independently of seat.

1 of 6
 HYDRAULIC CYLINDERS SERVICE CAPACITIES OTHER SPECIFICATIONS
Boom cylinders Two (2) Fuel tank 108 gal (410.0 L) Swing speed 11.5 RPM
Cylinder bore 4.7 in (120 mm) Hydraulic system 66 gal (250.0 L) Swing torque 47,204 lbf·ft (64 kN·m)
Cylinder rod diameter 3.3 in (85 mm) Hydraulic Sump tank 39 gal (147.0 L)
Cylinder stroke 49.4 in (1 255 mm) Swing brake Mechanical disc
Engine oil w/ filter 6.1 gal (23.1 L) Undercarriage:
Arm cylinder One (1)
Cylinder bore 5.5 in (140 mm) Swing drive 1.3 gal (5.0 L) Length 14 ft 8 in (4 470 mm)
Cylinder rod diameter 3.9 in (100 mm) Final drive 1.3 gal (5.0 L) Track gauge 7 ft 10 in (2 390 mm)
Cylinder stroke 57.5 in (1 460 mm) Carrier rollers 2
Cooling system 8.3 gal (31.4 L)
Track rollers 8
Bucket cylinder One (1) DEF Tank 31.7 gal (120.0 L)
Cylinder bore 4.7 in (120 mm) Shoes – triple grouser 49
Cylinder rod diameter 3.3 in (85 mm) Shoe width – std. 2 ft 7 in (800 mm)
Cylinder stroke 39.8 in (1 010 mm) Link pitch 7.5 in (190 mm)
Track:
Chain Grease lubricated/strutted
Guides Single
Adjustment Hydraulic

M F

C
A B

K
L

I
J

G
H
Line drawings are for illustrative purpose only E
and may not be exact representation of unit.

DIMENSIONS
9 ft 8 in (2.94 m) Arm 7 ft 10 in (2.40 m) Arm
A. Overall height – with attachment 9 ft 8 in (2 980 mm) 10 ft 5 in (3 190 mm)
B. Cab height 9 ft 9 in (2 990 mm) 9 ft 9 in (2 990 mm)
C. Overall height to top of guardrail 10 ft 8 in (3 280 mm) 10 ft 8 in (3 280 mm)
D. Overall length – with attachment 30 ft 9 in (9 430 mm) 31 ft 2 in (9 510 mm)
E. Overall length – without attachment 16 ft 8 in (5 000 mm) 16 ft 8 in (5 000 mm)
F. Width of upper structure 9 ft 1 in (2 770 mm) 9 ft 1 in (2 770 mm)
G. Track overall length 14 ft 7 in (4 470 mm) 14 ft 7 in (4 470 mm)
H. Track overall width with 36.5 in (800 mm) shoes 10 ft 5 in (3 190 mm) 10 ft 5 in (3 190 mm)
I. Track shoe width 2 ft 2 in (800 mm) 2 ft 2 in (800 mm)
J. Center to center – idler to sprocket 12 ft 0 in (3 660 mm) 12 ft 0 in (3 660 mm)
K. Upper structure ground clearance 3 ft 4 in (1 050 mm) 3 ft 4 in (1 050 mm)
L. Minimum ground clearance 1 ft 4 in (440 mm) 1 ft 4 in (440 mm)
M. Rear tail swing radius 9 ft 1 in (2 770 mm) 9 ft 1 in (2 770 mm)
Operating weight* 48,900 lb (22 200 kg) 48,848 lb (22 181 kg)
Ground pressure 4.93 psi (0.34 bar) 4.93 psi (0.34 bar)
NOTE: *With 18 ft 8 in (5.70 m) boom, 31.5 in (800 mm) track shoe, 1,433 lb (650 kg) bucket, 165 lb (75 kg) operator, full fuel and standard equipment.

CX210D 2 of 6
 A

H
D
C

8 ft (2.44 m)

PERFORMANCE SPECS
9 ft 8 in (2.94 m) Arm 7 ft 10 in (2.40 m) Arm
A. Maximum dig radius 32 ft 6 in (9 900 mm) 30 ft 11 in (9 420 mm)
B. Dig radius at groundline 31 ft 11 in (9 730 mm) 30 ft 4 in (9 240 mm)
C. Maximum dig depth 21 ft 7 in (6 620 mm) 20 ft 1 in (6 110 mm)
D. Dig depth – 8 ft 0 in (2.44 m) level bottom 21 ft 2 in (6 470 mm) 19 ft 4 in (5 900 mm)
E. Dump height 22 ft 3 in (6 810 mm) 21 ft 6 in (6 590 mm)
F. Maximum reach height 31 ft 5 in (9 610 mm) 30 ft 8 in (9 390 mm)
G. Bucket rotation 177° 177°
H. Maximum vertical wall dig depth 19 ft 6 in (5 960 mm) 17 ft 11 in (5 480 mm)
J. Minimum swing radius 12 ft 0 in (3 660 mm) 11 ft 11 in (3 620 mm)
Arm digging force:
Standard 23,155 lbf (103 kN) 27,651 lbf (123 kN)
Power Boost 25,179 lbf (112 kN) 29,900 lbf (133 kN)
Bucket digging force:
Standard 31,923 lbf (142 kN) 31,923 lbf (142 kN)
Power Boost 34,621 lbf (154 kN) 34,621 lbf (154 kN)

CX210D 3 of 6
 LIFT CAPACITIES

9 ft 8 in (2.94 m) Lift capacities using a 1,433 lb (650 kg) bucket, 8,642 lb (3 920 kg) counterweight.

Load 5 ft 10 ft 15 ft 20 ft 25 ft 30 ft
MINIMUM REACH MAXIMUM REACH
(Lift Point (1.5 m) (3 m) (4.5 m) (6 m) (7.5 m) (9 m)
Height)
@ END SIDE END SIDE END SIDE END SIDE END SIDE END SIDE END SIDE @ END SIDE

+25 ft 20 ft 2 in 6,250 lb* 6,250 lb* 5,100 lb* 5,100 lb* 25 ft 0 in 5,000 lb* 5,000 lb*
(7.5 m) (6.16 m) (2 980 kg)* (2 980 kg)* (2 960 kg)* (2 960 kg)* (7.73 m) (2 260 kg)* (2 260 kg)*

+20 ft 20 ft 1 in 9,200 lb* 9,200 lb* 8,550 lb* 7,850 lb 28 ft 4 in 4,750 lb* 4,750 lb*
(6 m) (6.11 m) (4 180 kg)* (4 180 kg)* (3 940 kg)* (3 660 kg) (8.69 m) (2 150 kg)* (2 150 kg)*

+15 ft 16 ft 11 in 11,350 lb* 11,350 lb* 10,300 lb* 10,300 lb* 9,800 lb* 7,600 lb 5,700 lb* 5,400 lb 30 ft 4 in 4,700 lb* 4,700 lb*
(4.5 m) (4.98 m) (4 870 kg)* (4 870 kg)* (4 760 kg)* (4 760 kg)* (4 490 kg)* (3 550 kg) (3 180 kg)* (2 530 kg) (9.26 m) (2 140 kg)* (2 140 kg)*

+10 ft 7 ft 3 in 19,400 lb* 19,400 lb* 22,500 lb* 22,500 lb* 16,500 lb* 16,350 lb 12,700 lb* 10,550 lb 10,700 lb* 7,300 lb 8,300 lb* 5,300 lb 31 ft 3 in 4,850 lb* 4,850 lb
(3 m) (2.23 m) (8 280 kg)* (8 280 kg)* (10 500 kg)* (10 500 kg)* (7 670 kg)* (7 580 kg) (5 880 kg)* (4 900 kg) (4 930 kg)* (3 400 kg) (3 870 kg) (2 460 kg) (9.53 m) (2 210 kg)* (2 200 kg)

+5 ft 8 ft 3 in 9,350 lb* 9,350 lb* 20,300 lb* 20,300 lb* 20,550 lb* 15,450 lb 14,850 lb* 9,950 lb 11,000 lb 7,000 lb 8,150 lb 5,100 lb 31 ft 3 in 5,200 lb* 4,750 lb
(1.5 m) (2.52 m) (4 220 kg)* (4 220 kg)* (8 580 kg)* (8 580 kg)* (9 540 kg)* (7 180 kg) (6 860 kg)* (4 630 kg) (5 110 kg) (3 250 kg) (3 790 kg) (2 390 kg) (9.53 m) (2 350 kg)* (2 150 kg)

5 ft 8 in 8,300 lb* 8,300 lb* 18,950 lb* 18,950 lb* 22,800 lb* 14,600 lb 15,200 lb 9,500 lb 10,700 lb 6,700 lb 7,650 lb* 5,000 lb 30 ft 6 in 5,700 lb* 4,900 lb
Groundline
(1.72 m) (3 770 kg)* (3 770 kg)* (8 330 kg)* (8 330 kg)* (10 540 kg)* (6 780 kg) (7 080 kg) (4 410 kg) (4 970 kg) (3 130 kg) (3 730 kg) (2 330 kg) (9.28 m) (2 600 kg)* (2 220 kg)

-5 ft 1 ft 7 in 11,700 lb* 11,700 lb* 16,400 lb* 16,400 lb* 24,400 lb* 24,400 lb* 23,200 lb* 14,350 lb 14,950 lb 9,250 lb 10,550 lb 6,600 lb 28 ft 8 in 6,650 lb* 5,350 lb
(-1.5 m) (0.48 m) (5 220 kg)* (5 220 kg)* (7 490 kg)* (7 490 kg)* (10 770 kg)* (10 770 kg)* (10 710 kg)* (6 660 kg) (6 960 kg) (4 300 kg) (4 910 kg) (3 070 kg) (8.76 m) (3 010 kg)* (2 430 kg)

-10 ft 1 ft 7 in 18,100 lb* 18,100 lb* 22,300 lb* 22,300 lb* 33,500 lb* 28,750 lb 22,550 lb* 14,500 lb 15,050 lb 9,350 lb 10,700 lb 6,750 lb 25 ft 11 in 8,400 lb* 6,350 lb
(-3 m) (0.48 m) (8 080 kg)* (8 080 kg)* (9 960 kg)* (9 960 kg)* (14 770 kg)* (13 430 kg) (10 420 kg)* (6 730 kg) (6 990 kg) (4 340 kg) (4 980 kg) (3 130 kg) (7.92 m) (3 790 kg)* (2 860 kg)

-15 ft 4 ft 0 in 29,150 lb* 29,150 lb* 31,500 lb* 31,500 lb* 28,900 lb* 28,750 lb 19,900 lb* 14,950 lb 14,100 lb* 9,850 lb 21 ft 8 in 11,850 lb* 8,500 lb
(-4.5 m) (1.16 m) (12 870 kg)* (12 870 kg)* (13 990 kg)* (13 990 kg)* (13 430 kg)* (13 990 kg)* (9 260 kg)* (6 940 kg) (6 630 kg)* (4 550 kg) (6.67 m) (5 360 kg)* (3 790 kg)

7 ft 10 in (2.40 m) Lift capacities using a 1,543 lb (700 kg) bucket, 8,642 lb (3 920 kg) counterweight.

Load 5 ft 10 ft 15 ft 20 ft 25 ft 30 ft
MINIMUM REACH MAXIMUM REACH
(Lift Point (1.5 m) (3 m) (4.5 m) (6 m) (7.5 m) (9 m)
Height)
@ END SIDE END SIDE END SIDE END SIDE END SIDE END SIDE END SIDE @ END SIDE

+25 ft 18 ft 5 in 5,600 lb* 5,600 lb* 8,700 lb* 8,700 lb* 22 ft 11 in 7,400 lb* 7,400 lb*
(7.5 m) (5.64 m) (2 680 kg)* (2 680 kg)* (3 510 kg)* (3 510 kg)* (7.1 m) (3 340 kg)* (3 340 kg)*

+20 ft 18 ft 4 in 10,250 lb* 10,250 lb* 10,250 lb* 10,250 lb* 9,400 lb* 7,600 lb 26 ft 7 in 7,000 lb* 6,750 lb
(6 m) (5.57 m) (4 680 kg)* (4 680 kg)* (4 670 kg)* (4 670 kg)* (4 320 kg)* (3 550 kg) (8.14 m) (3 170 kg)* (3 020 kg)

+15 ft 13 ft 4 in 13,250 lb* 13,250 lb* 13,600 lb* 13,600 lb* 11,300 lb* 10,850 lb* 10,450 lb* 7,400 lb 28 ft 8 in 6,950 lb* 5,700 lb
(4.5 m) (4.03 m) (6 870 kg)* (6 870 kg)* (6 320 kg)* (6 320 kg)* (5 240 kg)* (5 020 kg) (4 840 kg)* (3 460 kg) (8.76 m) (3 140 kg)* (2 580 kg)

+10 ft 9 ft 9 in 14,650 lb* 14,650 lb* 17,950 lb* 16,250 lb* 13,500 lb* 10,300 lb 11,100 lb 7,150 lb 29 ft 8 in 7,150 lb* 5,250 lb
26,000 lb* 26,000 lb* (3 580 kg)* (2 400 kg)
(3 m) (3.00 m) (6 520 kg)* (6 520 kg)* (8 230 kg)* (7 530 kg) (6 240 kg)* (4 780 kg) (5 150 kg) (3 320 kg) (9.05 m) (3 240 kg)* (2 370 kg)

+5 ft 10 ft 7 in 13,450 lb* 13,450 lb* 21,300 lb* 15,050 lb 15,400 lb 9,750 lb 10,800 lb 6,850 lb 29 ft 8 in 7,550 lb* 5,100 lb
(3 740 kg) (2 340 kg)
(1.5 m) (3.21 m) (6 110 kg)* (6 110 kg)* (9 810 kg)* (6 990 kg) (7 120 kg)* (4 530 kg) (5 040 kg) (3 180 kg) (9.05 m) (3 430 kg)* (2 320 kg)

8 ft 8 in 12,750 lb* 12,750 lb* 17,000 lb* 17,000 lb* 23,100 lb* 14,400 lb 15,050 lb 9,350 lb 10,600 lb 6,650 lb 28 ft 10 in 8,350 lb* 5,300 lb
Groundline
(2.64 m) (5 790 kg)* (5 790 kg)* (7 480 kg)* (7 480 kg)* (10 680 kg)* (6 680 kg) (7 010 kg) (4 340 kg) (4 920 kg) (3 080 kg) (8.78 m) (3 780 kg)* (2 400 kg)

-5 ft 3 ft 4 in 12,350 lb* 12,350 lb* 18,050 lb* 18,050 lb* 25,150 lb* 25,150 lb* 23,050 lb* 14,300 lb 14,900 lb 9,200 lb 10,550 lb 6,600 lb 27 ft 0 in 9,400 lb 5,900 lb
(-1.5 m) (1.03 m) (5 520 kg)* (5 520 kg)* (8 040 kg)* (8 040 kg)* (11 120 kg)* (11 120 kg)* (10 640 kg)* (6 650 kg) (6 940 kg) (4 280 kg) (4 900 kg) (3 060 kg) (8.23 m) (4 260 kg) (2 670 kg)

-10 ft 3 ft 5 in 22,050 lb* 22,050 lb* 25,150 lb* 25,150 lb* 31,800 lb* 29,000 lb 21,850 lb* 14,550 lb 15,050 lb 9,400 lb 23 ft 11 in 11,450 lb 7,200 lb
(-3 m) (1.03 m) (9 830 kg)* (9 830 kg)* (11 250 kg)* (11 250 kg)* (14 690 kg)* (13 510 kg)* (10 090 kg)* (6 770 kg) (7 000 kg) (4 360 kg) (7.33 m) (5 140 kg) (3 230 kg)

-15 ft 6 ft 5 in 42,150 lb* 42,150 lb* 25,950 lb* 25,950 lb* 18,100 lb* 15,100 lb 19 ft 4 in 12,050 lb* 10,200 lb
(-4.5 m) (1.88 m) (16 900 kg)* (16 900 kg)* (12 080 kg)* (12 080 kg)* (8 460 kg)* (7 020 kg) (5.96 m) (5 500 kg)* (4 530 kg)

NOTE: *Following number indicates hydraulic capacity

CX210D 4 of 6
STANDARD EQUIPMENT
ENGINE Oil cooler 10 programmable attachments settings on
Power save monitor – 5 single flow, 5 dual flow
Isuzu AR-4HK1X
Pump stand-by pressure Seatbelt – 3 in (76 mm)
Tier 4 Final Certified
Auto travel speed change Heated high-back cloth seat with air
Selective Catalytic Reduction – SCR
Selectable work modes suspension and 65° tilt adjustment
Diesel Oxidation Catalyst – DOC
Free swing Sliding seat — 3.54 in (90 mm)
Cooled Exhaust Gas Recirculation – CEGR
Hydraulic oil sample port Adjustable armrests
EGR Coolers
Control pattern selector Tilting consoles – 4-position
Four-cylinder turbo-charged diesel
Pre-set auxiliary pump settings Sliding cockpit – 3.15 in (80 mm)
VGT turbocharger
Auxiliary valve Low-effort joystick controls
Electronic fuel injection
5,000-hour hydraulic oil change interval Controls pre-wired for auxiliary
High pressure common rail system
1,000-hour hydraulic filter change interval Straight travel
Neutral safety start
SAHR brake AM/FM radio with antenna, 2 speakers and
Auto-engine warm up Bluetooth capabilities
Glow-plug pre-heat Aux-in port for personal electronics
Fuel Economy Assist System – FEA UPPER STRUCTURE
Radio mute switch – joystick
Engine Protection Feature – EPF ISO mirrors – 3 Rear-view camera
Dual-stage fuel filtration Cab ISO-Mounts – fluid and spring Anti-theft system – start code system
Dual element air filter Upper mounted work light – 70 watt Rubber floormat
Remote oil filter Swivel guard belly pan 12 Volt electric outlet
Drain for fuel tank Center cover – over main CV 24 Volt cigarette lighter
Remote engine oil drain Fuel tank belly pan Windshield wiper/washer
500-hour engine oil change interval Handrail – RH access Cup holder
24 Volt system ISO guard rails Storage compartments
Engine oil sample port Lifting eyes for counterweight Warm/cool storage compartment
Battery disconnect switch Lockable fuel cap, service doors and tool box Travel alarm with cancel switch
Emergency engine stop Ignition keys
External Fuel and DEF gauges ATTACHMENTS One key start & lock-up
Fan housing Cab filter – external
Boom – 18 ft 8 in (5.70 m)
Fuel cooler Cab handrails
Arm – 9 ft 8 in (2.94 m)
Fuel filter restriction indicator Operator’s manual
Heavy-duty bucket linkage
Fuel shut-off valve
Boom mounted work light – 70 watt
Idle start UNDERCARRIAGE
Auxiliary pipe brackets
Radiator, oil cooler, intercooler
Centralized grease fittings Long undercarriage
– protective screen
Attachment cushion valve 31.5 in (800 mm) steel shoes,
Arm and boom regeneration triple semi-grouser
FUEL ECONOMY SYSTEMS
Bucket anti-clatter device Full overlap turntable bearing tub
Engine Idle/Fuel Economy System: Chrome pins Single track chain guides
Auto-idle Easy Maintenance System (EMS) bushings Hydraulic track adjustment
One-touch idle
Teardrop pin retention keepers Sealed link chain
Auto-idle shut-down
Steps
BEC – Boom Economy Control
OPERATOR ENVIRONMENT Carbody belly pan – swivel guard
AEC – Auto Economy Control
ROPS protection X-pattern carbody
SWC – Swing Relief Control
FOPS cab top guard – Level 1 Lashing points – tie downs
SSC – Spool Stroke Control
Pressurized cab Extra Filter Kit:
Engine oil filter
HYDRAULICS Face vent
Filter wrench
Cab lights – 2
Auto power boost Fuel filters
Interior dome light Grease gun
Auto swing priority
One-touch lock front window Green plug oil drain hose for
Arm speed assistance – 2 pump flow
One piece window – right engine oil drain
Auxiliary flow control
Safety glass windows Hydraulic return filter
Auxiliary valve Pilot circuit hydraulic filter
Gate lock hydraulic activation
Boom speed assistance – 2 pump flow
Emergency exit and hammer
Bucket curl assist TELEMATICS
Clear polycarbonate roof window
Control levers pre-wired for auxiliary hydraulics
with sunshade CASE SiteWatch™ Telematics – includes
Electronically controlled hydraulic pumps
AC/heat/defrost with auto climate control hardware and a 3-yr Advanced
Holding valve – Boom and Arm
LED Color monitor – 7 in (180 mm) data subscription
Fire wall
26 selectable languages for monitor
Hydraulic filter restriction indicator
On-board diagnostic system
Neutral pump de-stroke

CX210D 5 of 6
 OPTIONAL EQUIPMENT
ENGINE ATTACHMENTS OPERATOR ENVIRONMENT
Refuling pump Heavy-duty arm – 7 ft 10 in (2.40 m) FOPS cab top guard – Level 2
Air pre-cleaner – Cyclone Quick coupler/Case multi-pin grabber Front grill guard – 2 x 2 in (50.8 x 50.8 mm)
High ambient temperature cooling package Tools: screen mesh
Heavy-duty/Extreme-duty/Ditching Buckets; Front rock guard – vertical bars
HYDRAULICS Hammers; Thumbs; Compaction plates Two piece/OPG 1
Auxiliary hydraulics: Load holding control Front rock guard – vertical bars
Single acting/joystick activated One piece/OPG 2
UPPER STRUCTURE Vandal guard (front window) with common key
Double acting/joystick activated – thumb
Multi-function with electronic pressure Rubber bumper guard – order through Rain deflector – not available with front guards
control/joystick activated with Service Parts Sun visor
electronic proportional controls Side-view camera
UNDERCARRIAGE LED Package:
Secondary low-flow/joystick activated
Proportional hydraulic controls 23.6 in (600 mm) rubber link chain, bolt-on Includes 1 Side view camera and 6
rubber pads on steel chain LED Lights – 2 front cab mounted,
Hose Burst Check Valve – HBCV
23.6 in (600 mm) steel shoes, 2 rear mounted and 1 mounted on
MACHINE CONTROL triple semi-grouser each side

Leica iCON iXE2 – 2D System 27.6 in (700 mm) steel shoes,

Leica iCON iXE3 – 3D System triple semi-grouser
Track guides – triple

CaseCE.com
©2021 CNH Industrial America LLC. All rights reserved. CASE is a IMPORTANT: CASE Construction Equipment Inc. reserves the right CASE Construction Equipment is biodiesel-
trademark registered in the United States and many other countries, to change these specifications without notice and without incurring friendly. NOTE: All engines meet current EPA
owned by or licensed to CNH Industrial N.V., its subsidiaries or any obligation relating to such change. Availability of some models emissions regulations. All specifications are
affiliates. CNH Industrial Capital is a trademark in the United States and equipment builds vary according to the country in which the stated in accordance with SAE Standards or
and many other countries, owned by or licensed to CNH Industrial equipment is used. The illustrations and text may include optional Recommended Practices, where applicable.
N.V., its subsidiaries or affiliates. Printed in U.S.A. Contains 10% equipment and accessories and may not include all standard
Always read the Operator’s Manual before
post-consumer fiber. equipment. Your CASE dealer/distributor will be able to give you
operating any equipment. Inspect equipment
details of the products and their specifications available in your area.
before using it, and be sure it is operating
properly. Follow the product safety signs and
Form No. CCE202106CX210D use any safety features provided.
Replaces Form No. CCE202008CX210D

CX210D 6 of 6