RVVPX310.

11B-T2

6-port sector antenna, 2x 694–960 and 4x 1695–2690 MHz, 65°

HPBW, 3x RET with manual override and internal Bias-Tee's.

Internal RET actuators are connected in SRET configuration, with dedicated AISG ports for each
band
Each port has an integrated bias tee, and each band has its own smart switch that automatically
selects between bias tee or AISG inputs according to a predetermined priority table

This product will be discontinued on: November 30, 2023

Replaced By:

RVVPX310.11B-T2H 6-port sector antenna, 2x 694–960 and 4x 1695–2690 MHz, 65° HPBW, 3x RET with manual override
and internal Bias-Tee's.

General Specifications
Antenna Type Sector

Band Multiband

Color Light Gray (RAL 7035)

Grounding Type RF connector body grounded to reflector and mounting bracket

Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel
measurements described in white paper WP-112534-EN

Radome Material Fiberglass, UV resistant

Radiator Material Low loss circuit board

Reflector Material Aluminum

RF Connector Interface 7-16 DIN Female

RF Connector Location Bottom

RF Connector Quantity, high band 4

RF Connector Quantity, low band 2

RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male

RET Interface, quantity 1 female | 3 male

Input Voltage 10–30 Vdc

Port 1 | Port 2 | Port 3 | Port 4 | Port 5 | Port 6 Page 1 of 4

©2023 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: May 25, 2023
RVVPX310.11B-T2
Internal Bias Tee Port 1 | Port 2 | Port 3 | Port 4 | Port 5 | Port 6

Internal RET High band (2) | Low band (1)

Power Consumption, idle state, maximum 2W

Power Consumption, normal conditions, maximum 13 W

Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions
Width 350 mm | 13.78 in

Depth 208 mm | 8.189 in

Length 2533 mm | 99.724 in

Net Weight, without mounting kit 33.2 kg | 73.193 lb

Array Layout

Page 2 of 4

©2023 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: May 25, 2023
RVVPX310.11B-T2
Electrical Specifications
Impedance 50 ohm

Operating Frequency Band 1695 – 2690 MHz | 694 – 960 MHz

Polarization ±45°

Total Input Power, maximum 1,000 W @ 50 °C

Electrical Specifications
Frequency Band, MHz 694–790 790–890 890–960 1695–1880 1850–1990 1920–2180 2300–2690
Gain, dBi 16.3 16.7 16.9 17.5 17.9 18.1 18.6
Beamwidth, Horizontal, 69 67 64 62 60 62 61
degrees
Beamwidth, Vertical, degrees 10.1 8.9 8.2 7.6 7.1 6.6 5.5
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 18 18 18 18 18 18 18
Null Fill, dB -22 -22 -22 -22 -22 -22 -22
Front-to-Back Ratio at 180°, 29 32 31 33 42 38 39
dB
Isolation, Cross Polarization, 28 28 28 30 30 30 30
dB
Isolation, Inter-band, dB 30 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0

PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, 200 200 200 175 175 175 175
maximum, watts

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960 1695–1880 1850–1990 1920–2180 2300–2690
Gain by all Beam Tilts, 16 16.5 16.8 17.1 17.6 17.8 18.2
average, dBi
Gain by all Beam Tilts ±0.5 ±0.2 ±0.1 ±0.4 ±0.4 ±0.3 ±0.5
Tolerance, dB
Gain by Beam Tilt, average, 0 ° | 16.0 0 ° | 16.5 0 ° | 16.9 0 ° | 17.0 0 ° | 17.6 0 ° | 17.8 0 ° | 18.3
dBi 5 ° | 16.0 5 ° | 16.5 5 ° | 16.9 5 ° | 17.1 5 ° | 17.6 5 ° | 17.8 5 ° | 18.3
10 ° | 15.9 10 ° | 16.5 10 ° | 16.8 10 ° | 17.2 10 ° | 17.6 10 ° | 17.8 10 ° | 18.1

Beamwidth, Horizontal ±1 ±1.1 ±1.8 ±2.5 ±1.4 ±2.5 ±5.6

Tolerance, degrees
Beamwidth, Vertical ±0.7 ±0.4 ±0.3 ±0.4 ±0.3 ±0.5 ±0.4
Tolerance, degrees
Page 3 of 4

©2023 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: May 25, 2023
RVVPX310.11B-T2
USLS, beampeak to 20° above 18 18 18 18 18 18 18
beampeak, dB
Front-to-Back Total Power at 26 26 25 27 29 27 29
180° ± 30°, dB
CPR at Boresight, dB 15 16 16 19 20 21 20
CPR at Sector, dB 12 12 14 13 12 12 11

Mechanical Specifications
Wind Loading @ Velocity, frontal 445.0 N @ 150 km/h (100.0 lbf @ 150 km/h)

Wind Loading @ Velocity, lateral 379.0 N @ 150 km/h (85.2 lbf @ 150 km/h)

Wind Loading @ Velocity, maximum 942.0 N @ 150 km/h (211.8 lbf @ 150 km/h)

Wind Loading @ Velocity, rear 472.0 N @ 150 km/h (106.1 lbf @ 150 km/h)

Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 456 mm | 17.953 in

Depth, packed 357 mm | 14.055 in

Length, packed 2834 mm | 111.575 in

Weight, gross 50 kg | 110.231 lb

Regulatory Compliance/Certifications
Agency Classification
CHINA-ROHS Above maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
UK-ROHS Compliant/Exempted

Included Products
T-029-GL-E – Adjustable Tilt Pipe Mounting Kit for 2.362"-4.5" (60-115mm) OD round members for panel
antennas. Includes 2 clamp sets.

* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance

Page 4 of 4

©2023 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: May 25, 2023