Compact C

Range
 Sludge
pumping

Features & Benefits

“A competitively priced
Capacity up to 440m3/h
progressing cavity
Pressure up to 24 bar pump, with a compact
construction and
Temperature -10°C up to 100°C
maximum performance
Typical applications include: characteristics.”
• Domestic and industrial effluents
• Hydrated lime slurry
• Sludge
• Shear sensitive latex emulsion
• Milk curds, sauces, fruit juices
• Industrial chemicals and detergents
• Starch slurries
• Coating clays, gypsum and silicate
• Paper stocks
• Agricultural slurries

Materials of construction High pressure / Low running speeds

Available in cast iron long haul pumping Reduced wear for a longer
or stainless steel, with a choice Can offer considerable project working pump life which
of rotor and stator materials cost savings by utilising small extends the periods between
to suit individual applications bore pipework and eliminating routine maintenance. Think
e.g. hard chrome plated rotor the need for a series of pumps, of the savings you could make
or natural rubber stator. when pumping over long on abrasive applications.
distances or with high
head requirements.

To minimise the impact on the environment, this has been printed on recycled paper
 Waste water
pumping

Compact unit Gentle pumping action

As the drive forms an integral Minimises shear and
part of the unit, the pump crush damage to the
is ideal for space-saving pumped product.
installations.

Surface mounted Up to 8.5m suction lift

Making it easier, cleaner Deep sumps can be easily
and less hazardous for pumped without the use
maintenance. of submersible equipment.

Plug in shaft Viscous products

Ease of maintenance when The pump can be
assembling or dismantling, supplied with a square
with extraction facility. inlet and conveyor to
assist viscous slurries
into the pumping element.

Inspection cover Baseplate Sealed joints Shaft sealing options

Available for applications Pumps are supplied on a Fully sealed drive train Packed gland or single
where rag content is a problem. baseplate to ease installation. to maximise life and and double mechanical
minimise downtime. seals are available.

Versatile Robust drives Duracoat coating Handles gas entrainment

Can be installed vertically Specially selected drives Rotors can be supplied with No air or gas locking in the
or horizontally to suit the and gearboxes for longer Mono’s range of specialist pump. The positive seal
application. Can be run life. Options include coatings to help extend the formed by the interference
in either direction. electric motor drive units life of the rotors by increasing fit between rotor and stator
supplied as overhead vee wear and corrosion resistance. enables the pump to self prime
belt driven, direct-coupled and it also allows tri-phase
or variable speed drives liquids i.e. solids, gases and
with mechanical variable liquids to be handled easily.
speed or frequency inverter.
 Transfer of industrial
detergents

Product Dimensions

MODEL A A1 B C D E F G H A1 A
C21B 429 115 296 133 11/4” 144 85 120 160 DISMANTLING
DISTANCE B C
C21D 573 250 440 133 11/4” 144 85 120 160
D
C22A 429 115 296 133 11/4” 144 85 120 160
C22B 573 250 440 133 11/4” 144 85 120 160
C22D 959 525 822 137 11/2” 148 85 120 160

E
F
C23A 520 165 383 137 1/”
1 2 148 85 120 160
C23B 665 300 528 137 11/2” 148 85 120 160
G
C23K 665 300 528 137 11/2” 148 85 120 160
H

MODEL A A1 B C D E F G H MODEL A A1 B C D E F G H
C1XK 750 300 593 157 50 190 85 120 160 C17A 1110 430 830 281 125 310 150 180 300
C14K 986 455 756 230 65 227 112 140 200 C17B 1478 800 1198 281 125 310 150 180 300
C15K 1102 570 882 220 80 232 112 140 200 C17D 2626 1385 2224 402 150 410 225 280 350
C16K 1272 680 1036 236 100 255 125 160 250 C18A 1246 475 966 281 125 310 150 180 300
C17K 1478 800 1198 281 125 310 150 180 300 C18B 1742 880 1374 386 125 320 160 200 300
C18K 1654 880 1374 280 125 310 150 180 300 C18D 2786 1555 2384 402 150 410 225 280 350
C19K 1856 990 1541 315 150 345 160 200 300 C19A 1394 530 1079 315 150 345 160 200 300
C1AK 2007 1100 1692 315 150 345 160 200 300 C19B 1856 990 1541 315 150 345 160 200 300
C1BK 2437 1210 2009 427 200 450 225 280 350 C1AA 1476 610 1161 315 150 345 160 200 300
C13D 1160 525 930 230 65 227 112 140 200 C1AB 2159 1100 1756 402 150 410 225 280 350
C2XA 566 135 409 157 50 190 85 120 160 C1BA 1794 640 1366 427 200 450 225 280 350
C2XB 749 315 592 157 50 227 112 120 160 C1BB 2591 255 2009 582 200 475 250 280 411
C1XD 1363 650 1086 277 80 245 125 160 250 C1CA 2268 250 1611 657 250 511 250 340 411
C14A 781 250 551 230 65 227 112 140 200 C1CB 3146 250 2489 657 250 511 250 340 411
C14B 986 455 756 230 65 227 112 140 200 C1CK 3146 250 2489 657 250 511 250 340 411
C14D 1462 780 1185 277 80 245 125 160 250 C1DA 2569 250 1912 657 250 511 250 340 411
C15A 842 310 622 220 80 232 112 140 200
C15B 1159 570 882 277 80 245 125 160 250
C15D 1776 1005 1457 319 100 280 150 180 300 A1 A
C16A 960 365 724 236 100 255 125 160 250 DISMANTLING
DISTANCE
C16B 1355 680 1306 319 100 280 150 180 300 B C
C16D 2181 1210 1813 369 125 320 160 200 300
D
E
F

G
H

A1 A
MODEL A A1 B C D E F G H
DISMANTLING
S14A 781 250 526 255 165x165 236 112 140 200 DISTANCE

S14K 986 455 731 255 165x165 236 112 140 200
B C
S15A 842 310 587 255 165x165 236 112 140 200
S15K 1102 570 847 255 165x165 236 112 140 200
D
S16A 960 365 674 286 200x200 260 125 160 250
S16K 1272 680 986 286 200x200 260 125 160 250
S17A 1110 430 777 333 240x240 310 150 180 300
E

S17K 1478 800 1145 333 240x240 310 150 180 300
F

S18A 1246 475 912 334 240x240 310 150 180 300
S18K 1654 880 1320 334 240x240 310 150 180 300 G
H
All dimensions in mm’s, unless otherwise stated and for guidance only.
Dimension A1 is the preferred dismantling space. For full certified drawings, please contact Mono.
 Pumping of
slurry mix

Performance Data

290
C1DA
210
C1CA C1CB
440
140
C1CK
C1BA C1BB
225
94
C1BK
C1AA C1AB
165
71.5
C1AK C19A C19B
125
57.5
C19K
C18A / S18A C18B C18D
97
C18K / 49.5
Capacity m 3/h

Capacity m3/h

S18K C17A / S17A C17B C17D

79
35.5
C17K / S17K
C16A / S16A C16B C16D
57
C16K / 25.5
S16K C15A / S15A C15B C15D
37
C15K / 14.5
S15K C14A / S14A C14B C14D
22
10.7
C14K / S14K C2XA C2XB C1XD
13
6
C1XK
C23A C23B C13D
10
3.4
C23K C22A C22B C22D
0 4 6 1.5

C21B C21D
Differential Pressure - BAR

0 6 12 24

Differential Pressure - BAR

For guidance in selecting a pump, please contact Mono.

Motor/Baseplate Dimensions

MODEL LENGTH WIDTH HEIGHT MODEL LENGTH WIDTH HEIGHT Length

C1XK 1304 300 304 C16A 1635 360 488
C14K 1665 300 475 C16B 2341 420 609
C15K 1777 360 475 C16D 3225 520 472
C16K 1947 360 488 C17A 2066 360 584
C17K 2464 360 609 C17B 2464 360 609

Height
C18K 2640 420 609 C17D 3672 520 727
C19K 2902 420 649 C18A 2202 360 584
C1AK 3053 420 649 C18B 2788 420 649
C1BK 3481 520 537 C18D 3830 520 537
C13D 1835 360 475 C19A 2440 420 649
C2XA 1120 300 304 C19B 2902 420 649
C2XB 1329 300 304 C1AA 2522 420 649
C1XD 2038 420 488 C1AB 3205 520 727
C14A 1456 300 475 C1BA 2840 520 727
C14B 1665 300 475 C1BB 4350 752 892
C14D 2137 360 488 C1CA 4025 752 892

Width
C15A 1517 300 475 C1CB 4900 778 943
C15B 1834 360 488 C1CK 4900 778 943
C15D 2762 420 609 C1DA 4350 752 892

MODEL LENGTH WIDTH HEIGHT MODEL LENGTH WIDTH HEIGHT

S14A 1456 300 475 C21B 984 300 304
S14K 1665 300 475 C21D 1149 300 304
S15A 1517 300 475 C22A 984 300 304
S15K 1777 360 475 C22B 1149 300 304
S16A 1635 360 488 C22D 1544 300 304
S16K 1947 360 488 C23A 1084 300 304
S17A 2066 360 584 C23B 1234 300 304
S17K 2464 360 609 C23K 1234 300 304
S18A 2202 360 584 All dimensions in mm’s and refer to the largest selected drive.
Dimensions are for guidance only, for full certified drawings, please contact Mono.
S18K 2640 420 609

Europe Americas Australasia Asia

Mono Pumps Ltd, Martin Street Monoflo, 9700 West Gulf Bank Monoflo Canada Mono Pumps (Australia) Pty Ltd Mono Pumps Ltd
Audenshaw, Manchester Houston, Texas 77040, USA 6010 - 53rd Ave 338-348 Lower Dandenong Road No. 500 YaGang Road
M34 5JA, England T. +1 281 272 7700 Alberta, Lloydminster Mordialloc, Victoria 3195 Lujia Village, Malu
T. +44 (0)161 339 9000 E. inquire@monoflo.com T9V2T2, Canada Australia Jiading District
E. info@mono-pumps.com T. +1 780 875 5584 T. 1800 333 138 Shanghai 201801, P.R. China
Monoflo S.A., Ing Huergo 2239
E. info.monoflo@nov.com E. ozsales@mono-pumps.com T. +86 (0)21 5915 7168
D.M.I EST, 56 rue du Pont (1842) Monte Grande
E. monoshanghai@nov.com
88300 Rebeuville, France Pcia. de Buenos Aires, Argentina Mono Pumps (New Zealand) Ltd
T. +33 (0)3 29 94 26 88 T. +54 11 4290 9940/50 PO Box 71-021, Fremlin Place
E. dmi-est@dmi-est.fr E. info@monoflo.com.ar Avondale, Auckland 7
New Zealand
T. +64 (0)9 829 0333
E. info@mono-pumps.co.nz www.mono-pumps.com

Published information other than that marked CERTIFIED does not extend any warranty or
representation, expressed or implied, regarding these products. Any such warranties or other
terms and conditions of sales and products shall be in accordance with Mono Pumps Limited
standard terms and conditions of sale, available on request.
© Mono Pumps Limited May 2009 Literature reference: MPSB/01/01/R3
Mono® is a registered trademark of Mono Pumps Ltd.
Registered in England No 300721

Produced on recycled paper