GeM Bidding 6511419
GeM Bidding 6511419
GeM Bidding 6511419
GEM/2024/B/5042942
Dated/ दनांक : 12-06-2024
Department Name/ वभाग का नाम Urban Development & Housing Department Bihar
Item Category/मद केटे गर Mobile Containers for Solid Waste as per IS 12402 (Q3)
1/8
Bid Details/ बड ववरण
Required/आव यकता No
(a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the
relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service
Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this
Policy./जेम क शत के अनुसार ईएमड छूट के इ छुक बडर को संबंिधत केटे गर के िलए बड के साथ वैध समिथत द तावेज़ तुत करने है ।
एमएसई केटे गर के अंतगत केवल व तुओं के िलए विनमाता तथा सेवाओं के िलए सेवा दाता ईएमड से छूट के पा ह। यापा रय को इस नीित के
दायरे से बाहर रखा गया है ।
(b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable./ईएमड और संपादन
जमानत रािश, जहां यह लागू होती है , लाभाथ के प म होनी चा हए।
Beneficiary/लाभाथ :
EXECUTIVE OFFICER, NAGAR PANCHAYAT HATHUWA
Nagar panchayat Hathuwa,Gopalganj Urban Development & Housing Department Bihar, Urban Development and
Housing Department,
(Rahul Dhar Dubey)
Splitting/ वभाजन
2/8
MII Purchase Preference/एमआईआई खर द वर यता
1. The minimum average annual financial turnover of the bidder during the last three years, ending on 31st
March of the previous financial year, should be as indicated above in the bid document. Documentary evidence in
the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant /
Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the
date of constitution / incorporation of the bidder is less than 3-year-old, the average turnover in respect of the
completed financial years after the date of constitution shall be taken into account for this criteria.
2. Experience Criteria: In respect of the filter applied for experience criteria, the Bidder or its OEM {themselves or
through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any
Central / State Govt Organization / PSU for number of Financial years as indicated above in the bid document
before the bid opening date. Copies of relevant contracts to be submitted along with bid in support of having
supplied some quantity during each of the Financial year. In case of bunch bids, the category of primary product
having highest value should meet this criterion.
3. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product
during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period
shall be uploaded with the bid. In case the date of constitution / incorporation of the OEM is less than 3 year old,
the average turnover in respect of the completed financial years after the date of constitution shall be taken into
account for this criteria.
4. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or
similar Category Products for 80% of bid quantity, in at least one of the last three Financial years before the bid
opening date to any Central / State Govt Organization / PSU. Copies of relevant contracts (proving supply of
cumulative order quantity in any one financial year) to be submitted along with bid in support of quantity
supplied in the relevant Financial year. In case of bunch bids, the category related to primary product having
highest bid value should meet this criterion.
5. Reverse Auction would be conducted amongst first 50% of the technically qualified bidders arranged in the
order of prices from lowest to highest. Number of sellers eligible for participating in RA would be rounded off to
next higher integer value if number of technically qualified bidders is odd (e.g. if 7 bids are technically qualified,
then RA will be conducted amongst L-1 to L-4). In case number of technically qualified bidders are 2 or 3, RA will
be between all without any elimination. If Buyer has chosen to split the bid amongst N sellers, then minimum N
sellers would be taken to RA round. In case Primary products of only one OEM are left in contention for
participation in RA based on lowest 50% bidders qualifying for RA, the number of sellers qualifying for RA would
be increased to get at least products of one more OEM (directly participated or through its reseller) if available.
Further, if bid(s) of any seller(s) eligible for MSE preference is / are coming within price band of 15% of Non MSE
L-1 or if bid of any seller(s) eligible for Make in India preference is / are coming within price band of 20% of non
MII L-1, then such MSE / Make in India seller shall also be allowed to participate in the RA process.
3/8
Specification Name/ विश का Bid Requirement/ बड के िलए आव यक (Allowed
Specification
नाम Values)/अनुमत मू य
Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार
841428,Nagar Parishad
1 Pramod Kumar 500 15
Gopalganj, Bihar
Buyer Added Bid Specific Terms and Conditions/ े ता ारा जोड़ गई बड क वशेष शत
1. Generic
OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up
to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to
increase the ordered quantity by up to 25% of the contracted quantity during the currency of the
contract at the contracted rates. Bidders are bound to accept the orders accordingly.
2. Generic
Actual delivery (and Installation & Commissioning (if covered in scope of supply)) is to be done at
following address
3. Scope of Supply
Scope of supply (Bid price to include all cost components) : Only supply of Goods
4/8
4. Turnover
Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last
three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the
relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the
bidder is less than 3 year old, the average turnover in respect of the completed financial years after the
date of constitution shall be taken into account for this criteria.
5. Turnover
OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product
during the last three years, ending on 31st March of the previous financial year, should be as indicated in
the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant
periods or a certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for
the relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the
OEM is less than 3 year old, the average turnover in respect of the completed financial years after the
date of constitution shall be taken into account for this criteria. In case of bunch bids, the OEM of
CATEGORY RELATED TO primary product having highest bid value should meet this criterion.
6. OEM
IMPORTED PRODUCTS: In case of imported products, OEM or Authorized Seller of OEM should have a
registered office in India to provide after sales service support in India. The certificate to this effect should
be submitted.
Availability of Service Centres: Bidder/OEM must have a Functional Service Centre in the State of each
Consignee's Location in case of carry-in warranty. (Not applicable in case of goods having on-site
warranty). If service center is not already there at the time of bidding, successful bidder / OEM shall have
to establish one within 30 days of award of contract. Payment shall be released only after submission of
documentary evidence of having Functional Service Centre.
Dedicated /toll Free Telephone No. for Service Support : BIDDER/OEM must have Dedicated/toll Free
Telephone No. for Service Support.
Escalation Matrix For Service Support : Bidder/OEM must provide Escalation Matrix of Telephone Numbers
for Service Support.
10. Certificates
Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the
Bid document, ATC and Corrigendum if any.
11. Certificates
ISO 9001: The bidder or the OEM of the offered products must have ISO 9001 certification.
12. Certificates
Material Test Certificate Should Be Sent Along with The Supply. The Material Will Be Checked by Buyer’s
Lab & the Results of the Lab will be the Sole Criteria for Acceptance of the Item.
13. Certificates
The bidder is required to upload, along with the bid, all relevant certificates such as BIS licence, type test
certificate, approval certificates and other certificates as prescribed in the Product Specification given in
5/8
the bid document.
After award of contract – Successful Bidder shall have to get advance sample approved from buyer before
bulk manufacturing / starting bulk supplies. Successful Bidder shall submit
2
samples for Buyer's approval, within 21 days of award of contract. Buyer shall, as per contract
specifications framework, either approve the advance sample or will provide complete list of modification
required in the sample within 10 days of receipt of advance sample. Seller shall be required to ensure
supply as per approved sample with modifications as communicated by Buyer. If there is delay from buyer
side in approval of advance sample – the delivery period shall be refixed without LD for the period of delay
in sample approval. In case, the sample is found to have major deviations / not conforming to the Contract
specifications, the buyer at its discretion may call for fresh samples for approval before allowing bulk
supplies or may terminate the contract after notifying the deviations to the seller.
Unless otherwise provided in the contract, all samples required for test shall be supplied by the contractor
free of cost. Where under the contract, the contractor is required to submit an advance sample, any
expenses incurred by the contractor on or in connection with the production of stores in bulk, before the
sample has been approved unconditionally shall be borne by the Seller and he shall not claim any
compensation in the event of such sample being found unacceptable by the Buyer / Consignee.
Proof for Past Experience and Project Experience clause: For fulfilling the experience criteria any
one of the following documents may be considered as valid proof for meeting the experience criteria:a.
Contract copy along with Invoice(s) with self-certification by the bidder that service/supplies against the
invoices have been executed.b. Execution certificate by client with contract value.c. Any other document
in support of contract execution like Third Party Inspection release note, etc.Proof for Past Experience and
Project Experience clause: For fulfilling the experience criteria any one of the following documents may be
considered as valid proof for meeting the experience criteria:a. Contract copy along with Invoice(s) with
self-certification by the bidder that service/supplies against the invoices have been executed.b. Execution
certificate by client with contract value.c. Any other document in support of contract execution like Third
Party Inspection release note, etc.
The Bidder / OEM {themselves or through reseller(s)}, should have executed project for supply and
installation / commissioning of same or similar Category Products during preceding 3 financial years (i.e.
current year and three previous financial years) as on opening of bid, as per following criteria:
Bidders can also submit the EMD with Account Payee Demand Draft in favour of
1. An Affidavit Must Be provided that tenderer has not been Black Listed by any govt. or Semi Govt. Organi
6/8
zation affidavit required on Rs.100 stamp paper by 1st/2nd class Magistrate Should be uploaded with bid.
2. Income tax return with Computation sheet of last 03 years must be submitted.
3. The product being supplied must have a warranty of one year or more. The certificate of warranty will b
e given by the OEM, only which will have to be uploaded along with the bid.
5. Up-to-date GST 3B last eight-month clearance certificate should be uploaded with Bid.
6. EMD exemption is not allowed, such seller is liable to be rejected. 7.The Turnover certificate of bidder by
C.A certified for the last four years with UDIN must be submitted.
8. Firm registration certificate of bidder, MSME, GST certificate, Pan Card by bid der Firm/Agency, Cancelle
d Cheque is to be upload along with bid documents in ATC.
10. Net Worth of the Bidder or OEM should be positive as per the last audited financial statement.
11. The Turnover certificate of OEM for the last three years with UDIN must be submitted.
12. The Bidder Should have to submit Zed Certification Certified by MSME must be Required.
13. The Bidder Should have to submit bank solvency of minimum Rs. 50 Lakhs with bid.
14. The Bidder Should must have to submit Current Bid Date Notary Documents upload ATC should be atte
sted by registered Notary Public.
15. The bid reserves the right to cancel the bid at any time without assigning an y reason.
16. Sample and EMD will be submit as per the request of Nagar parishad office before Bid opening.
Disclaimer/अ वीकरण
The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization, whereby Buyer organization is solely responsible for the impact of these clauses
on the bidding process, its outcome, and consequences thereof including any eccentricity / restriction arising in
the bidding process due to these ATCs and due to modification of technical specifications and / or terms and
conditions governing the bid. If any clause(s) is / are incorporated by the Buyer regarding following, the bid and
resultant contracts shall be treated as null and void and such bids may be cancelled by GeM at any stage of
bidding process without any notice:-
1. Definition of Class I and Class II suppliers in the bid not in line with the extant Order / Office Memorandum
issued by DPIIT in this regard.
2. Seeking EMD submission from bidder(s), including via Additional Terms & Conditions, in contravention to
exemption provided to such sellers under GeM GTC.
3. Publishing Custom / BOQ bids for items for which regular GeM categories are available without any
Category item bunched with it.
4. Creating BoQ bid for single item.
5. Mentioning specific Brand or Make or Model or Manufacturer or Dealer name.
6. Mandating submission of documents in physical form as a pre-requisite to qualify bidders.
7. Floating / creation of work contracts as Custom Bids in Services.
8. Seeking sample with bid or approval of samples during bid evaluation process. (However, in bids for
attached categories, trials are allowed as per approved procurement policy of the buyer nodal Ministries)
9. Mandating foreign / international certifications even in case of existence of Indian Standards without
specifying equivalent Indian Certification / standards.
7/8
10. Seeking experience from specific organization / department / institute only or from foreign / export
experience.
11. Creating bid for items from irrelevant categories.
12. Incorporating any clause against the MSME policy and Preference to Make in India Policy.
13. Reference of conditions published on any external site or reference to external documents/clauses.
14. Asking for any Tender fee / Bid Participation fee / Auction fee in case of Bids / Forward Auction, as the
case may be.
Further, if any seller has any objection/grievance against these additional clauses or otherwise on any aspect of
this bid, they can raise their representation against the same by using the Representation window provided in
the bid details field in Seller dashboard after logging in as a seller within 4 days of bid publication on GeM. Buyer
is duty bound to reply to all such representations and would not be allowed to open bids if he fails to reply to
such representations.
This Bid is also governed by the General Terms and Conditions/ यह बड सामा य शत के अंतगत भी शािसत है
In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action
in accordance with the laws./ जेम क सामा य शत के खंड 26 के संदभ म भारत के साथ भूिम सीमा साझा करने वाले दे श के बडर से खर द
पर ितबंध के संबंध म भारत के साथ भूिम सीमा साझा करने वाले दे श का कोई भी बडर इस िन वदा म बड दे ने के िलए तभी पा होगा
जब वह बड दे ने वाला स म ािधकार के पास पंजीकृ त हो। बड म भाग लेते समय बडर को इसका अनुपालन करना होगा और कोई भी
गलत घोषणा कए जाने व इसका अनुपालन न करने पर अनुबंध को त काल समा करने और कानून के अनुसार आगे क कानूनी कारवाई
का आधार होगा।
8/8