Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 6 views

    En - FMD 09 - Product Information

    Uploaded by

    lsgl

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    En - FMD 09 - Product Information

    Uploaded by

    lsgl
    6 views2 pages

    Original Title

    en.FMD 09_Product Information

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    6 views2 pages

    En - FMD 09 - Product Information

    Uploaded by

    lsgl

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    FMD 09  PRODUCT INFORMATION

    Flow measuring device

    • EN 15267-3 tested
    • QAL1 certified
    • TUV approved
    • annual inspection

    • certified in compli-
    ance with MCERTS • certified in compliance
    Performance with GOST
    Standards • certificate no.:
    • certificate no.: МП-2550-0272-2016
    Sira MC170329/00

    Continuous in-situ measurement of velocity, temperature and absolute


    pressure of gas flows in pipelines

    APPLICATION YOUR BENEFITS AT A GLANCE


    The use of the measuring principle of dynamic pressure
    • probe and operating unit integrated in one
    and PT100 assures a device which is easy in design
    compact device
    and operating as well as the realtime monitoring of the
    measuring parameters. • local diagnosis of system state by integrated
    graphic display
    The operating and display unit is integrated in the
    • real-time display with line diagram
    weather protection casing. On the high-quality display
    all measuring values, status information and parame- • output of volume flow at standard reference
    conditions possible
    ters are displayed.
    • easy mounting and very low maintenance
    Optionally, the absolute pressure at the measuring requirement
    point can be measured continuously by an absolute
    • absolute pressure measurement (optional)
    pressure transmitter.
    • automatic zero point and span point check
    (optional)

    INSTALLATION EXAMPLE

    Duct PRECONDITIONS ON SITE


    FMD 09
    • ambient temperature: -20...+50 °C
    • location free of percussion
    • homogenous dust and stack gas distribution
    Flange
    • flow velocity of min. 3 m/s
    • installation place with run-in/run-out zone of min.
    5-fold/2-fold length of duct diameter

    Product Information  EN  05/2022 FMD 09


    FMD 09 PRODUCT INFORMATION

    DESIGN & DIMENSIONS

    Sectional view FMD 09 - side view - frontal view Control and display unit FMD 09
    Probe head Δp transmitter

    Abs.pressure

    640
    senor (opt.)

    Probe rod PT100

    155
    Heating (opt.)
    220
    500 200 340 440

    TECHNICAL DATA

    Housing: probe head with GRP weather protection casing, IP55;


    440 x 640 x 1040 mm (w x h x d), approx. 30 kg
    Probe: dynamic pressure probe with integrated PT100; immersion depth: 500 mm (standard)
    Control and display unit: integrated control unit with graphic display and 4 operating keys
    Relative humidity: no special sensitivity respective to atmospheric humidity
    Media temperature: max. 280 °C (higher temperatures on request)
    Measuring ranges: • velocity: 0...30 m/s (opt.: 0...60 m/s)
    • volume flow (in operation / in standard condition dry): 0...3,200,000 m³/h
    • differential pressure: 0...5 mbar (opt.: 0...10 mbar), measurement uncertainty <1%
    • temperature: 0...300 °C (opt.: 0...800 °C), measurement uncertainty <1%
    • absolute pressure (opt.): 800...1,200 mbar
    Operational availability: after approx. 1 min
    Analogue outputs: 3 x 4...20 mA; selection of the following measurands: velocity, volume flow
    (in operation / in standard condition dry), differential pressure, temperature and
    optionally absolute pressure;
    burden: max. 500 Ω
    Digital outputs: status signals: max. 24 V DC at 0.1 A; failure, maintenance, limit value 1 and 2
    Process connection: flange DN 80 PN 6
    Power supply: 110/230 V AC, 50-60 Hz, 24 V DC, 5W
    Optional: • output of absolute pressure (measuring range: 800...1200 mbar)
    • feeding of frost protection heating (230 V AC, 500 W)
    • manual or automatic back-purging
    • automatic zero point check
    • automatic span point check
    • Hastelloy probe material for corrosive flue gas
    Special models are possible on request.

    Dr. Födisch Umweltmesstechnik AG


    Zwenkauer Strasse 159  04420 Markranstädt  Germany
    Phone: +49 34205 755-0  Fax: +49 34205 755-40 www.foedisch.de
    E-mail: sales@foedisch.de © Dr. Födisch Umweltmesstechnik AG

    You might also like