Nothing Special   »   [go: up one dir, main page]

DDG-2080Pro Online Conductivity Meter With EC-A401 Conductivity Sensor

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Shanghai BOQU Instrument Co.

,Ltd Contact: Joy Lee


Website: www.bqeit.com Mobile: + 86 18916729106

DDG-2080Pro Industrial Conductivity&TDS&Salinity&Resistivity Meter


Instruments are used in industrial measuring of the temperature, conductivity, Resistivity, salinity and total

dissolved solids, complete functions, stable performance, easy operation, low power consumption, safe and reliable,

using matching analog conductivity electrode, can be widely used in thermal power generation, chemical industry,

metallurgy, environmental protection, pharmaceutical, biochemical, food, tap water and other industrial occasions.

Technical Indexes

Functions EC Resistivity Salinity TDS


Measuring range 0.00uS/cm-200mS/cm 0.00-20.00 0.00-80.00 0-133000
MΩ g/L(ppt) ppm
Resolution 0.01/0.1/1 0.01 0.01 1
Accuracy ±2%F.S ±2%F.S ±2%F.S ±2%F.S
Temp. compensation Pt 1000/NTC10K
Temp. range -10.0 to +130.0℃
Temp. resolution 0.1℃
Temp. accuracy ±0.2℃
Matched electrode DDG-0.01/DDG-0.1/DDG-1.0/DDG-10/DDG-30

Ambient temperature range 0 to +70℃


Storage temp. -20 to +70℃
Display Back light, dot matrix
Current output 4-20mA
RS485 Mod bus RTU protocol
Maximum relay contacts capacity 5A/250VAC,5A/30VDC
Language selection English/Chinese
Waterproof grade IP65
Power supply From 90 to 260 VAC, power consumption < 4 watts
Installation panel/wall/pipe installation
Weight 0.9Kg
Shanghai BOQU Instrument Co.,Ltd Contact: Joy Lee
Website: www.bqeit.com Mobile: + 86 18916729106

EC-A401 Quadrupole Conductivity Sensor


EC-A401 conductivity electrode is embedded with NTC-10K/PT1000 (standard) temperature electrode, which can

measure the water sample very accurately conductivity and temperature. Using a new generation of four-electrode

technology, a wide measurement range, automatic switching of measurement ranges, built-in temperature sensor,

compared with the traditional two-electrode sensor, the sensor not only has higher precision, but also has a wider

measurement range and better stability. The conductivity sensor also has the unique advantages of large quantity:

firstly, it completely solves the polarization problem of high conductivity test; secondly, it solves the problem of

polarization, it solves the problem of inaccurate readings caused by electrode contamination.

Features
1. Using industrial online conductivity electrodes, it can work stably for a long time.

2. Built-in temperature sensor, real-time temperature compensation.

3. Using four-electrode technology, the maintenance cycle is longer;

4. The range is extremely wide and the anti-interference ability is strong

Technical Indexes
Measurement Parameters Conductivity, Temperature

Measuring range Conductivity: 0-200ms/cm

Temperature: 0~60.0 ℃

Basic Error ±1% Temperature: ±0.5℃

Material Sensor: Titanium alloy;Body:ABS

Response time less than 60S

Working temperature 0-80℃

Compressive strength: 0.6MPa

Cable 5 meters

Weight 150g

Protection class IP65

Thread up and down 3/4

You might also like