PHG-2081Pro Industrial PH Meter & Sensor
PHG-2081Pro Industrial PH Meter & Sensor
PHG-2081Pro Industrial PH Meter & Sensor
performance, easy operation, low power consumption, safety and reliability are the outstanding advantages of this
instrument. This instrument is equipped with RS485 transmission interface, which can be connected to the host
computer through ModbusRTU protocol to realize monitoring and recording. It can be widely used in industrial
occasions such as thermal power generation, chemical industry, metallurgy, environmental protection,
Functions pH ORP
Measuring range -2.00pH to +16.00 pH -2000mV to +2000mV
Resolution 0.01pH 1mV
Accuracy ±0.01pH ±1mV
Temp. compensation Pt 1000/NTC10K
Temp. range -10.0 to +130.0℃
Temp. compensation range -10.0 to +130.0℃
Temp. accuracy ±0.5℃
Display Back light, dot matrix
pH/ORP current output1 Isolated, 4 to 20mA output , max. load 500Ω
Temp. current output 2 Isolated, 4 to 20mA output , max. load 500Ω
Current output accuracy ±0.05 mA
RS485 Mod bus RTU protocol
Baud rate 9600/19200/38400
Maximum relay contacts capacity 5A/250VAC,5A/30VDC
Language selection English/ Chinese
Waterproof grade IP65
Power supply From 90 to 260 VAC, power consumption < 4 watts, 50/60Hz
Material ABS
Installation panel/wall/pipe installation
Size/Weight 144mm×144mm×104mm, 0.9Kg
Shanghai BOQU Instrument Co.,Ltd Contact: Jori Liu
Website: www.boquinstruments.com Mobile: + 86 17507082182
Features of PH Electrode
●It adopts the world-class solid dielectric and a large area of PTFE liquid for junction, non-block and easy
maintenance.
● Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh environment
● It adopts PPS/PC casing and the upper and lower 3/4NPT pipe thread, so it is easy for installation and there is
no need of the jacket, thus saving the installation cost.
● The electrode adopts the high-quality low-noise cable, which makes the signal output length more than 20
meters free of interference.
● There is no need for additional dielectric and there is a little amount of maintenance.
● High measurement accuracy, fast responsing and good repeatability.
● Reference electrode with silver ions Ag/AgCL
● The electrode can be replaced by a similar electrode made by any other country.