Daphne Grease MP No.2
Daphne Grease MP No.2
Daphne Grease MP No.2
Product identifier
Product name : DAPHNE GREASE MP NO.2
Restrictions on use :
None known.
Telefax : +60-3-6157-9636
Label elements
Hazard pictograms :
Hazardous ingredients
Chemical name CAS-No. Concentration (% w/w)
Phosphorodithioic acid, O,O-di-C1-14-alkyl 68649-42-3 >= 1 - < 2.5
esters, zinc salts
Benzenamine, N-phenyl-, reaction products with 68411-46-1 >= 1 - < 2.5
2,4,4-trimethylpentene
No hazardous ingredients
Chemical name CAS-No. Concentration (% w/w)
Mineral oil - >= 80 - < 90
Lithium soap - < 10
Lubricating oil additive - <1
2/8
LT_178 - DAPHNE GREASE MP NO.2 Revision Date:
04.12.2019
Extinguishing media
Unsuitable extinguishing : High volume water jet
media
Methods and materials for : Keep in suitable, closed containers for disposal.
containment and cleaning up
Handling
Storage
3/8
LT_178 - DAPHNE GREASE MP NO.2 Revision Date:
04.12.2019
Control parameters
Components CAS-No. Value type Control Basis
(Form of parameters /
exposure) Permissible
concentration
Distillates (petroleum), 64742-54-7 TWA (Mist) 5 mg/m3 MY PEL
hydrotreated heavy paraffinic
TWA 5 mg/m3 ACGIH
(Inhalable
fraction)
Residual oils (petroleum), 64742-57-0 TWA (Mist) 5 mg/m3 MY PEL
hydrotreated
TWA 5 mg/m3 ACGIH
(Inhalable
fraction)
lithium 12-hydroxystearate 7620-77-1 TWA 10 mg/m3 MY PEL
TWA 10 mg/m3 ACGIH
(Inhalable
fraction)
TWA 3 mg/m3 ACGIH
(Respirable
fraction)
Individual protection measures, such as personal protective equipment
Eye/face protection : Eye wash bottle with pure water
Tightly fitting safety goggles
Wear face-shield and protective suit for abnormal processing
problems.
Hand protection
Remarks : The suitability for a specific workplace should be discussed
with the producers of the protective gloves.
Appearance : paste
Odor : characteristic
4/8
LT_178 - DAPHNE GREASE MP NO.2 Revision Date:
04.12.2019
Solubility(ies)
Water solubility : insoluble
Viscosity
Viscosity, kinematic : No data available
Acute toxicity
Not classified based on available information.
Skin corrosion/irritation
Not classified based on available information.
Product:
Remarks: May cause skin irritation and/or dermatitis.
5/8
LT_178 - DAPHNE GREASE MP NO.2 Revision Date:
04.12.2019
STOT-single exposure
Not classified based on available information.
STOT-repeated exposure
Not classified based on available information.
Aspiration toxicity
Not classified based on available information.
Further information
Product:
Remarks: No data available
Ecotoxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Other adverse effects
Product:
Additional ecological : No data available
information
Disposal methods
Waste from residues : Do not dispose of waste into sewer.
Do not contaminate ponds, waterways or ditches with
chemical or used container.
Send to a licensed waste management company.
International Regulations
UNRTDG
Not regulated as a dangerous good
IATA-DGR
Not regulated as a dangerous good
IMDG-Code
Not regulated as a dangerous good
6/8
LT_178 - DAPHNE GREASE MP NO.2 Revision Date:
04.12.2019
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable for product as supplied.
Safety, health, and environmental regulations specific for the hazardous chemical
Occupational Safety and Health (Classification, Labelling and Safety Data Sheet of Hazardous
Chemicals) Regulations 2013.
Occupational Safety and Health (Use and Standards of Exposure of Chemicals Hazardous to
Health) Regulations 2000.
The ingredients of this product are reported in the following inventories:
ENCS : Listed
TSCA : Listed
EINECS : Listed
DSL : Listed
AICS : Listed
KECI : Listed
PICCS : Listed
IECSC : Listed
TCSI : Listed
AICS - Australian Inventory of Chemical Substances; ANTT - National Agency for Transport by
Land of Brazil; ASTM - American Society for the Testing of Materials; bw - Body weight; CMR -
Carcinogen, Mutagen or Reproductive Toxicant; DIN - Standard of the German Institute for
Standardisation; DSL - Domestic Substances List (Canada); ECx - Concentration associated with
x% response; ELx - Loading rate associated with x% response; EmS - Emergency Schedule;
ENCS - Existing and New Chemical Substances (Japan); ErCx - Concentration associated with
x% growth rate response; ERG - Emergency Response Guide; GHS - Globally Harmonized
System; GLP - Good Laboratory Practice; IARC - International Agency for Research on Cancer;
IATA - International Air Transport Association; IBC - International Code for the Construction and
Equipment of Ships carrying Dangerous Chemicals in Bulk; IC50 - Half maximal inhibitory
concentration; ICAO - International Civil Aviation Organization; IECSC - Inventory of Existing
Chemical Substances in China; IMDG - International Maritime Dangerous Goods; IMO -
International Maritime Organization; ISHL - Industrial Safety and Health Law (Japan); ISO -
International Organisation for Standardization; KECI - Korea Existing Chemicals Inventory; LC50
- Lethal Concentration to 50 % of a test population; LD50 - Lethal Dose to 50% of a test
population (Median Lethal Dose); MARPOL - International Convention for the Prevention of
Pollution from Ships; n.o.s. - Not Otherwise Specified; Nch - Chilean Norm; NO(A)EC - No
Observed (Adverse) Effect Concentration; NO(A)EL - No Observed (Adverse) Effect Level;
NOELR - No Observable Effect Loading Rate; NOM - Official Mexican Norm; NTP - National
Toxicology Program; NZIoC - New Zealand Inventory of Chemicals; OECD - Organization for
Economic Co-operation and Development; OPPTS - Office of Chemical Safety and Pollution
7/8
LT_178 - DAPHNE GREASE MP NO.2 Revision Date:
04.12.2019
The information provided in this Material Safety Data Sheet is correct to the best of our
knowledge, information and belief at the date of its publication. The information given is designed
only as a guidance for safe handling, use, processing, storage, transportation, disposal and
release and is not to be considered a warranty or quality specification. The information relates
only to the specific material designated and may not be valid for such material used in
combination with any other materials or in any process, unless specified in the text.
MY / EN
8/8