Advatile Adhesive TDS
Advatile Adhesive TDS
Advatile Adhesive TDS
DESCRIPTION
ADVATILE ADHESIVE is a tile adhesive low-emission LEED designed for
fixing tiles on cement and cement-lime plasters, cement
screeds, cement ground coats, concrete substrates, primed light weight
AAC blocks / concrete block, wet areas (with periodic water
penetration) e.g. bathrooms, kitchen, toilets, utility rooms as cellars,
storerooms, drying rooms, corridors, stairs, anterooms and living
rooms.
ADVATILE ADHESIVE should not be used on deformable substrates such as:
primed plasterboards, wood chip-boards, heated floors,
large tiles for walls, higher loads and flexible sealing materials.
USES
For ceramic tiles, porcelain tiles, and mosaic tiles
Easy workability
AL SA’FAT - GREEN BUILDING
Certificate No. CL20020739
SURFACE PREPARATION
ADVATILE ADHESIVE can be applied on even, load-bearing and compact
substrates, free of any substances that reduce adherence
(grease, bitumen, dust):
Cement screeds and plasters, cement and lime plasters (residual moisture
≤1.5%)
APPLICATION
Add ADVATILE ADHESIVE into the precisely measured amount of clean
water (see technical data) and stir with a drill and mixer until a
homogenous mass without lumps is reached. Leave for 2 min. and then stir
again. Apply the mortar with a suitable notched trowel. For
indoor use, the mortar coverage (contact area) on the tile backside must be
at least 65%. Place the tiles only during the open time of
the adhesive. Do not lay tiles butt jointed! Fresh excess mortar can be
removed with water; hardened material can only be removed
mechanically.
COVERAGE
2.5kg - 8kg for even substrates
(consumption can vary depending on the evenness on the substrate,
trowel notch depth and the type of tiles)
TECHNICAL SPECIFICATIONS
Color Grey/White
Base Mixture of cements with mineral filers and modifiers
Bulk Density Approx. 1.6 + 0.05g/cc
Mixing Proportion 4.0 to 4.8L water per 20 kg bag
Pot Life >1 hour
Application Thickness 3 to 10mm
Open Time Approx. 10 minutes
Slip Resistant Excellent
Walkability After 24 hours @ 25°C
Temperature Resistance from -30°C to 70°C
Tensile adhesion strength >80Psi [28days @ 20minutes]
Sag on vertical surface >0.5mm
Shear adhesion strength glazed wall tile >200Psi [7days]
Shear adhesion strength porcelain tile >150 [28days]
Shelf Life Approx. 12 months from production date
Storage Store on pallets in dry conditions and original undamaged packaging
Packing 20kg/bag