ELECTRICAL ENGINEERING DEPARTMENT

Experiment List of DEM (22421)

Sr. No. Title Of Experiment

1. Construct AND, OR, NOT gates using universal gates.
2. Build the logic circuit on breadboard to check the De Morgan’s theorems.
3. Design Half Adder & Half Subtractor using Boolean expression,
4. Design Full Adder & Full Subtractor
5. Build / test function of RS flip flop using NAND Gate
6. Use IC 7476 to construct & test the functionality of D & T flip flop.
7. Implement 4 bit ripple counter using 7476
8. Identity various blocks of 8051 microcontroller.
9. Write an assembly language program (ALP)to perform following arithmetic operations
on 8-bit data :- addition, subtraction ,multiplication ,& division.
10. Write an ALP to transfer data from source to destination location of internal data
memory.
11. Interface 7 segments display to display decimal number from 0 to 9.
12. Interface stepper motor & write ALP to rotate stepper motor in clockwise &
anticlockwise direction at given angles.

Vision of Program
To empower the students’ abilities of academic, technical and professional competence in the field of Electrical Engineering and to nature
them in the developing areas to help the society.
Mission of Program
M1: To provide adequate knowledge in the field of Electrical Engineering to take the real time Challenges with professional skills.
M2: To improve continuous learning skills to meet employability objectives.
M3. To communicate strong ethical qualities between students for helping the society.
 ELECTRICAL ENGINEERING DEPARTMENT

Experiment List of EEC (22627)

Sr. No. Title Of Experiment

1. Draw plan of electrical installation scheme for given 1BHK residential unit using Auto-
cad
2. Draw plan of electrical installation scheme for given small commercial unit using Auto-
cad
3. Draw plan of electrical installation scheme for given small factory / industrial unit using
Auto-cad
4. Draw plan of electrical installation scheme for given HT (11kV) connection using Auto-
cad
5. Draw plan of electrical installation scheme for given LT (415V) line connection using
Auto-cad
6. Draw plan of public lighting installation scheme of given premises using Auto-cad
7. Prepare tender document, quotations, and bills for specified work.

Vision of Program
To empower the students’ abilities of academic, technical and professional competence in the field of Electrical Engineering and to nature
them in the developing areas to help the society.
Mission of Program
M1: To provide adequate knowledge in the field of Electrical Engineering to take the real time Challenges with professional skills.
M2: To improve continuous learning skills to meet employability objectives.
M3. To communicate strong ethical qualities between students for helping the society.
 ELECTRICAL ENGINEERING DEPARTMENT

Experiment List of ECA (22525)

Sr. No. Title Of Experiment

1. Identify star labelled electrical apparatus and compare the data for various star
ratings.
2. Determine the ‘% loading” along with the related efficiency for different loads of
given Induction motor.
3. Determine the reduction in power consumption in star mode operation of
induction motor compared to delta mode.
4. Compare power consumption of different types of TL with choke, electronic
ballast in LED lamps by direct measurements.
5. Determine the reduction in power consumption by replacement of lamps in a
class room / laboratory.
6. Determine the reduction in power consumption by replacement of Fan regulators
in a class room / laboratory.
7. Collect electricity bill of a commercial consumer and suggest suitable tariff for
conservation and reduction of its energy bill.
8. Estimate Energy saving by improving power factor and load factor for given
cases.
9. Prepare a sample energy audit questionnaire for the given industrial facility.
10. Prepare an energy audit report (phase-I)
11. Prepare an energy audit report (phase-II)
12. Prepare an energy audit report (phase-III)

Experiment List of EOE (312309)

Vision of Program
To empower the students’ abilities of academic, technical and professional competence in the field of Electrical Engineering and to nature
them in the developing areas to help the society.
Mission of Program
M1: To provide adequate knowledge in the field of Electrical Engineering to take the real time Challenges with professional skills.
M2: To improve continuous learning skills to meet employability objectives.
M3. To communicate strong ethical qualities between students for helping the society.
 ELECTRICAL ENGINEERING DEPARTMENT
Sr. No. Title Of Experiment
1. Identification of Active and Passive components and DMM handeling.
2. Measurement of amplitude, time period and frequency of given signal on CRO
3. Check the performance of PN Junction diode.
4. * Check performance of Zener diode.
5. * Construct and Test the half wave rectifier.
6. *Prepare and Test the half wave rectifier with LC filter/ π filter
7. *Build and Test the full wave rectifier using two diodes
8. * Construct and Test the full wave Bridge rectifier on bread board using four diodes
9. *Use LC/ π filter with full wave rectifier to measure ripple factor.
10. * Prepare and Test the full wave rectifier on bread board using IC KBU 808 with
filter.
11. *Build clipper circuit and observe the wave forms.
12. * Construct clamper circuit and observe wave forms.
13. * Construct and test the circuit for BJT in common emitter configuration.
14. *Test the performance parameters of BJT as Switch
15. * Check the performance of FET drain Characteristics.
16. *Find out faults at different stages of regulated DC power supply
17. *Trouble shoot given DC regulated power supply
18. *Build and Test the performance of Zener voltage regulator for given voltage.
19. * Construct and Test the performance of Positive voltage regulator using 78XX ,
three terminal IC for given voltage.
20. * Prepare and Test the performance of Dual voltage regulator using 78XX and79XX
,three terminal IC for given voltage
21. *Test the performance of IC 723 as Regulator.
22. * Construct and Test the performance of Positive voltage regulator using 78XX ,
three terminal IC for given voltage.
23. * Prepare and Test the performance of Dual voltage regulator using 78XX and79XX
,three terminal IC for given voltage

Experiment List of ESP (22633)

Sr. No. Title Of Experiment
Vision of Program
To empower the students’ abilities of academic, technical and professional competence in the field of Electrical Engineering and to nature
them in the developing areas to help the society.
Mission of Program
M1: To provide adequate knowledge in the field of Electrical Engineering to take the real time Challenges with professional skills.
M2: To improve continuous learning skills to meet employability objectives.
M3. To communicate strong ethical qualities between students for helping the society.
 ELECTRICAL ENGINEERING DEPARTMENT
1. Prepare report on safety precautions to be observed in substation e.g. carrying
out HV switching, isolation from other feeding points etc.
2. Draw layout and prepare report of 11 KV pole mounted substation Earthing after
seeing the relevant video clip
3. Interpret and draw single line diagram of 11 KV substation and list detailed
specifications of equipment used
4. Measure the earth resistance of 11/0.44 KV substation, Compare with standard
values and prepare report for improvement of earth resistance
5. Prepare visit report of 33/11 KV substation and draw the layout diagram
6. Interpret and draw single line diagram of 33 KV substation and list detailed
specifications of equipment used.
7. Measure the earth resistance and insulation resistance of 33 / 11 KV Substation
8. Prepare maintenance schedule of 33 / 11 KV substation
9. Interpret and draw single line diagram of 132 KV substation and list detailed
specifications of equipment used
10. Prepare a report on maintenance of SF6 circuit breakers in substations
11. Use the given fire-fighting equipment used in 11 KV, 33 KV and 132 KV
substation
12. Interpret and draw single line diagram of 33 KV Gas Insulated Substation

Vision of Program
To empower the students’ abilities of academic, technical and professional competence in the field of Electrical Engineering and to nature
them in the developing areas to help the society.
Mission of Program
M1: To provide adequate knowledge in the field of Electrical Engineering to take the real time Challenges with professional skills.
M2: To improve continuous learning skills to meet employability objectives.
M3. To communicate strong ethical qualities between students for helping the society.