Tool Aid Catalog 2018
Tool Aid Catalog 2018
Tool Aid Catalog 2018
Abrasive Blaster........................... 58 Computer Safe Circuit Testers........8, 9 Hammer Handles......................... 57 Phenolic Backing Discs................ 44 Stopper, Fluid Line........................ 52
Abrasives For Blasting.............50, 58 Continuity Tester............................10 Hammers, Body.................56, 57, 59 Pick & Hook Sets.................... 51, 53 Strut Alignment Level................... 46
Adapters for Caster/Camber Gage.48 Cotter Pin Pullers.................... 51, 53 Handles For Windshield Cut-Out Pick Hammers........................ 57, 59 Strut Spring Compressors............ 46
Adapters For Diesel Testers........ 30-32 Crimper, Pneumatic Panel............. 40 Wire.......................................... 66 Pneumatic Chisels...................39-43 Strutter®, Coil Spring Tools.......... 46
Adapters For Fuel Injection Testers. 19, 25 Crimpers, Electrical Terminal........ 4-7 Handles, Hammer......................... 57 Portable Work Stand.................... 55 Stubby Drill Bit............................. 62
Air Adjustment Valves.............. 37, 44 Cup Brush................................... 67 Hearing Protector......................... 54 Power Steering Tester................... 27 Suction Cups................................61
Air Blow Guns.........................38, 39 Current Indicator.......................... 14 Heat Gun..................................... 54 Pressure Testers, Engine.......... 18-25 Surface Treatment
Air Filter....................................... 37 Cut-Off Wheels............................ 33 Heat Shrink Tubes..........................11 Protect-A-Terminal®................... 8, 9 Discs with Holding Pads............. 37
Air Hammer Chisels................39-43 Cut-Out Knives............................. 66 High Impedance Circuit Testers... 8, 9 Pry Bar, Rolling Head................... 53 Suspension Tools....................45-48
Air Powered Caulking Gun............ 55 Cut-Out Wire................................ 66 High-Low Circuit Tester..................10 Pullers, Dent............................ 60, 61
Air Powered Cleaning Gun............ 38 Hinge Spring Tool......................... 63 Pullers, Hub................................. 45 Tack Puller................................... 68
Air Regulators......................... 37, 44 Dead Center Indicator................... 26 Holder For Body Files................... 65 Pulling Yoke................................. 45 Tapper Dent Puller.........................61
Air Saw Blades............................. 33 Dent Pullers............................ 60, 61 Holding Pads For Surface Treatment Pumps For Barrel and Pail............ 69 Terminal Crimping Tools............... 4-7
Air Tool Oilers............................... 36 Dent Pullers, Suction Cup..............61 Discs ......................................... 37 Punch Set, Body Forming............. 59 Terminal Release Tools, Deutsch...4, 5
Alignment Tools.......................46-48 Deutsch Terminal Crimpers..........4, 5 Hook and Pick Sets................. 51, 53 Punches, Brass............................ 50 Test Leads................................12, 13
Alternator-Generator-Starter Current . Deutsch Terminal Release Tools ...4, 5 Hooker Tools.................................51 Testers, Compression......... 26, 29-32
Indicator.................................... 14 Diaphragm Air Regulator.............. 37 Hose Clamp Pliers........................ 49 Quick Change Backing Pad........... 35 Testers, Diesel.........................29-32
Arbor For Cut-Off Wheels............. 33 Die Sets for Crimpers..................... 6 Hose Cutter.................................. 50 Quick Change Chisel Retainers..... 44 Testers, Electrical Circuit........8-10, 14
Automatic Trans. Testers................ 27 Diesel Compression Testing Sets... 29 Hose Removal Tools................ 51, 53 Quick Change Crimping Kits........... 6 Testers, Engine........................ 18-32
Axle and Hub Pullers.................... 45 Diesel Compression Test Adapters . Hot Air Heat Gun.......................... 54 Tie Rod End/Ball Joint Lifter ........ 46
...............................................29-32 Hub Pullers.................................. 45 Radiator Hose Tools................. 51, 53 Tie Rod Separator........................ 40
Back Pressure Tester, Exhaust........ 28 Digital Circuit Tester........................ 8 Ratchet Spinners.......................... 54 Tire Inflators...........................34, 38
Back Probes................................. 13 Disc Brake Caliper Brush.............. 50 IAC Test Lights..............................17 Ratcheting Terminal Crimpers......... 6 Tire Tread Depth Gage................... 35
Backing Discs.............................. 44 Disconnect Tool............................ 22 Ignition Testers & Tools........ 10, 15-17 Razor Blades................................ 49 Tire Valve Core Removers............. 35
Backing Pads............................... 35 Dollies....................................56, 59 Impact Driver Set......................... 49 Reciprocating Air Saw Blades....... 33 Titanium Step Drill....................... 62
Ball Joint Lifter............................. 46 Door Aligner Tools........................ 63 In-Line Ignition Spark Checkers1.5-17 Regulators, Air......................... 37, 44 Toe-In, Toe-Out Gages................... 48
Ball Joint Separator...................... 40 Door Clip Removers..................... 68 In-Line Oilers............................... 36 Release Tools, Deutsch................4, 5 Top Dead Center Indicator............. 26
Barrel Pumps............................... 69 Door Handle Removers................ 68 In-Line Water Separator................ 37 Release Tool, Weather Pack............. 5 Transmission Testers..................... 27
Battery Filler................................. 53 Door Skin Dolly............................ 56 In-Line Blow Guns........................ 39 Retain-It, Chisel Retainer.............. 44 Trim Cutter................................... 50
Beehive Spring Retainer............... 44 Door Skin Hammer.................56, 57 Inflators, Tire...........................34, 38 Retractable Test Leads..............12, 13 Trim Pad Removal Tool................. 68
Blades, Razor............................... 49 Door Spring Tool.......................... 63 Inspection Sticker Scrapers.......... 39 Reveal Molding Clip Tools............. 62 Triton Engine Compression Test
Blades, Air Saw............................ 33 Door Unlocking Tool......................51 Riveting Tools............................... 70 Adapter...................................... 26
Blaster, Abrasive......................50, 58 Double Flaring Tool Kit.................. 52 Jigglers........................................ 62 Rolling Head Pry Bar.................... 53 Tubing Cutter................................ 52
Bleed-Off Kit................................ 25 Double Pointed Scriber/Hook........ 53 Jumper Leads..........................12, 13 Rotary Spot Weld Cutter............... 62 Tubing Bender.............................. 52
Blow Guns..............................38, 39 Drill Bits....................................... 62 Junior Slugger Dent Puller.............61 Rubber Suction Cups.....................61 Tubing Flaring Kits........................ 52
Body Dollies............................56, 59 Drum Faucet................................ 69 Turntables, Alignment................... 48
Body File Holder........................... 65 Drum Pumps............................... 69 Knee Pads.................................... 54 Safety Chuck Chisel Holder........... 44
Body Files.................................... 65 Duby Wheel Aligning Gages.......... 48 Kneeling Pad................................ 54 Sand Blaster................................ 58 Universal Hook & Pick Set............ 53
Body Forming Punch Set.............. 59 Knot End Brush............................ 67 Sanding Backing Discs................. 44 Unlocking Tool...............................51
Body Hammers..................56, 57, 59 Ear Protector................................ 54 Sanding Blocks............................ 64 Upholstery Clip Remover.............. 68
Body Panel Drill Bit...................... 62 Easy Grip Brushes........................ 65 Lady’s Foot Pry Bar...................... 53 Sanding Boards............................ 64 Urethane Cut-Out Knives.............. 66
Body Repair Kits.......................... 59 Economy Chisels.......................... 42 Leads, Test...............................12, 13 Saw Blades, Reciprocating Air....... 33
Body Spoons.................... 56, 58, 59 Economy Heat Gun...................... 54 Light Slapping Spoon..............56, 59 Scrapers...................................... 49 Vacuum Tester.............................. 28
Bonnet Cleaning Tool ................... 63 Economy Paint Brushes............... 67 Logic Probes.............................. 8, 9 Scratch Brush.............................. 67
Brake Pedal Depressor.................. 47 Economy Slugger......................... 60 Lubricators, Air Tool...................... 36 Scribers....................................... 53 Water Separator........................... 37
Brass Air Regulator...................... 44 Electrical Test Leads.................12, 13 Scrub Brush................................. 50 Weather Pack Terminal Crimpers..4, 5
Brass Punches............................. 50 Electrical Testers....................8-10, 14 MacPherson Strut Spring Seal Puller.................................... 49 Weather Pack Release Tool..........4, 5
Brushes............................ 50, 65, 67 End Brushes................................ 67 Compressors............................. 46 Short Finders............................... 14 Weatherstrip Masking Kit............. 66
Brushes For Spray Guns............... 65 Engine Oil Pressure Testers........... 27 Magnetic Caster/Camber Gage...... 48 Side Molding Cutter..................... 50 Wheel Alignment Tools............45-48
Bubble Flaring Tool Kit ................. 52 Exhaust Back Pressure Tester....... 28 Masking Kit, Weatherstrip............. 66 Siphon Gun.................................. 38 Window Regulator Removers........ 68
Buffing Bonnet Cleaning Tool........ 63 Metri Pack Terminal Crimper........4, 5 Skinner Brush.............................. 67 Window Scrapers......................... 49
Faucet For Drums......................... 69 Midi-Weight Dent Puller.................61 Skinner Brush Arbor..................... 67 Windshield Cut-Out Wire.............. 66
Cable and Wire Ties...................... 14 File Holder.................................... 65 Mighty Cutter............................... 50 Slapping Spoon.......................56, 59 Windshield Removing Tools
Caliper Brush, Disc Brake.............. 50 Files, Body..............................64, 65 Mini Pick & Hook Set................... 53 Slide Hammers....................... 60, 61 61, 62, 66
Caster/Camber Gage..................... 48 Files, Nib...................................... 64 Mini Tubing Cutter........................ 52 Sling for Portable Work Stand...... 55 Windshield Scrapers.................... 49
Caulking Guns.............................. 55 Finger Saver®................................ 9 Molding Cutter............................. 50 Slugger Slide Hammer Sets..... 60, 61 Wire and Cable Ties...................... 14
Chisels Paks................................ 39 Finishing Hammers................. 57, 59 Muffler Tools.................................41 Spark Plug Cleaner....................... 50 Wire Brushes..........................65, 67
Chisel Retainers........................... 44 Flared End Brush.......................... 67 Multi-Step Drill............................. 62 Spark Testers....................... 10, 15-17 Wire Piercing Guide, Finger Saver®.9
Chisels, Air Tool.......................39-43 Flaring Tool Kits............................ 52 Spin-A-Ratchets........................... 54 Wire Strippers................................ 7
Circuit Master® Tester.................... 9 Flexible Body Files........................ 65 Nib Files....................................... 64 Spoon Dolly................................. 56 Wire Terminal Crimpers............... 4-7
Circuit Testers........................8-10, 14 Flexible Sanding Board................. 64 Noid Lights...................................17 Spoons, Body.................... 56, 58, 59 Wire Terminal Release Tools, Deutsch
Circular End Brush....................... 67 Fluid Line Stoppers...................... 52 Oil Pressure Testers...................... 27 Spot Weld Buster.......................... 62 ...................................................4, 5
Cleaning Gun, Air Powered............ 38 Front End Tools................. 40, 45-48 Spot Weld Cutter.......................... 62 Wood Hammer Handles............... 57
Cleaning Kit For Spray Guns......... 65 Fuel Injection Testers............... 18-25 Oilers, Air Tool.............................. 36 Spray Gun Cleaning Kits............... 65 Work Stand, Portable.................... 55
Clip Removal Tools..................62, 68 Fuel Line Disconnect Tool............. 22 Open Barrel Crimping Tool...........4, 5 Springs, Chisel Retainer................ 44
Coil On Plug Ignition Spark Checker.16 Fuel Pressure Testers............... 18-25 Spring Compressors...........46, 47, 63 Yoke for Pulling Axles................... 45
Coil Spring Compressors.........46, 47 Fuel Pump Tester.......................... 28 Pad Cleaning Tool......................... 63 Starting Tool For Windshield Cut-Out
Comprehensive Fuel Injection Pail Pump.................................... 69 Wire.......................................... 66
Pressure Test Kit................... 18, 22 Gages, Engine Test... 18, 20-24, 26-30 Paint Brushes............................... 67 Steering Wheel Holder.................. 47
Compression Testers, Gasoline Gages, Tire Inflator..................34, 38 Panel Crimper Tool....................... 40 Step Drill...................................... 62
Engine....................................... 26 Gages, Wheel Alignment..........46, 48 Parts Cleaning Brush.................... 50 Stethoscope................................. 28
Compression Testers, Diesel Grime Scrub Brush...................... 50 Pedal Depressor........................... 47 Sticker Scrapers........................... 49
Engine..................................29-32 Perma-Coil® Jumper Leads.......... 13 Strippers, Wire............................... 7
S & G Tool Aid keeps pace with technological changes in the automotive market.
Improvements may result in products you receive that differ from the pictures in this catalog.
Not responsible for typograhical errors.
Do you have an idea for a new tool? If so, it could be worth extra money!
Write or call our New Products Manager at 800-888-2080.
2
NUMERICAL INDEX
CAT. NO. PAGE CAT. NO. PAGE CAT. NO. PAGE CAT. NO. PAGE CAT. NO. PAGE CAT. NO. PAGE
Do you have an idea for a new tool? If so, it could be worth extra money!
Write or call our New Products Manager at 800-888-2080.
3
ELECTRICAL TOOLS FOR THE PROFESSIONAL
Crimps Open Crimps Weather Crimps Closed Barrel Releases Weather Releases Deutsch
Barrel Terminals Pack Terminals Deutsch Terminals Pack Terminals Terminals
TERMINAL CRIMPER FOR WEATHER PACK & METRI PACK TERMINALS 18910
• Easily crimps 14-22 gage open barrel Weather Pack, 150
and 280 Series Metri Pack and Molex terminals and seals FRO
in two operations T-201
M
• Has three wire crimping and two seal crimping positions 7A
SUPP
• Thin profile allows access to hard to reach areas .
• Steel construction
• Comfortable cushioned grips DISPLAY PACKAGED
18960
18850
18980
18920
NEW
Die Sets Included in Kit
Die Set Application
18921 For insulated terminals 10-22 AWG
18922 For non-insulated open barrel connectors 10-22 AWG including Weather Pack terminals
18923 For fully insulated quick disconnect terminals with thinner wire barrels 10-22 AWG
18920
18924 For non-insulated terminals 8-22 AWG
18925 For miniature insulated rings, spade and butt splices 16-26 AWG
18928 For RG-6 and RG-59 coaxial cable
18929 For 8mm and 8.5mm spiral core spark plug wire. Strips the insulation, crimps the spiral
core to the spark plug terminal and crimps the terminal to the spark plug wire insulation.
18937 For 18-30 AWG non-insulated open barrel terminals
18938 For 14-22 AWG insulated flag terminals
18960
18940 For 18, 20 & 22 AWG Weather Pack terminals
18941 For 12, 14 & 16 AWG Weather Pack terminals
18942 For 8-22 AWG heat shrink terminals
To Interchange Die Sets Lever Screw Lever Lever
Ratcheting Terminal Crimping Tool only (no Die Sets included) 18972 18926 18972 18972
NOTES:
18980 • The Die Sets are interchangeable among the Cat. Nos. 18920, 18930, 18960 and
18980, but not with Cat. No. 18900
• Die Sets are changed in Cat. Nos. 18960 and 18980 by using a quick change lever,
and in Cat. Nos. 18920 and 18930 by removing and replacing a screw
• All Die Sets are available individually
• Also included in the Cat. No. 18850 is the Cat. No. 18580, Release Tool for Weather Pack terminals
6 (Die Set is fixed and not interchangeable with above Die Sets)
CARDED
TOOLS FOR THE PROFESSIONAL
ELECTRICAL
WIRE STRIPPER FOR RECESSED AREAS 19100
• Narrow profile can easily access limited and hard to reach areas
• Strips 12-22 gage single or multiple stranded conductor wire
• Automatically adjusts to wire size
• Adjustable strip length gage
• Built-in wire cutter
• Lightweight and easy to use
EXPOSED PROBE
CAT. NO. DESCRIPTION LENGTH
27250 LONG, INSULATED PROBE 6¹⁄₂˝
27300 STANDARD LENGTH PROBE 3
22800 22810
CARDED
12
TOOLS FOR THE PROFESSIONAL
ELECTRICAL
20 PIECE BACK PROBE KIT 23500
• Use to back probe harness connectors,
fuel injectors and automotive sensors
• Straight, 45° & 90° stainless steel probes
in .027” & .040” diameters
• Color coded for easy identification
• Insulated body for testing up to 30 volts
• Compatible with standard 4mm plug
• 12” Extension leads quickly plug in to
permit testing in recessed areas
• Probes easily insert into automotive
connectors
• Kit includes one each:
CARDED
CARDED
13
ELECTRICAL TOOLS FOR THE PROFESSIONAL
CARDED
CARDED
24600 ALTERNATOR-GENERATOR-STARTER
CURRENT INDICATOR
24600 - Measure CHARGING RATE and STARTER CURRENT on one
indicator. No need to purchase two separate tools. Induction type meter.
Needs no hook up wires or cables. Hold meter over cable and read.
CARDED
DISPLAY PACKAGED
14
TOOLS FOR THE PROFESSIONAL
DIAGNOSTIC
KIT INCLUDES:
• Coil Tester
• Female x Female Adapter for testing conventional ignition
systems
• Battery Clip Adapter for testing directly to ground
• Extension for Coil Tester
Test vehicles with recessed spark plugs Test coil directly to ground Test conventional ignition systems
15
DIAGNOSTIC TOOLS FOR THE PROFESSIONAL
• Connects quickly.
• Technician can visually check condition of
ignition system at each cylinder.
• Frequency and intensity of flash indicates
whether there is an ignition system problem
or a fault in the fuel delivery system.
• Flash can be seen in bright sunlight.
• Clear plastic body can withstand rough use
and resists automotive chemicals.
• Protected by mechanical strain relief.
3 1/2˝
• The one kit for testing virtually all domestic and imported cars and trucks with gasoline fuel injection systems.
• For Multi-port, Throttle Body (TBI) and Continuous Injection Systems (CIS).
• Quick coupler fittings provide easy and fast hook-ups.
• Accurately and quickly diagnose fuel injection related problems.
• 4’ hose provides more mobility while monitoring fuel injection pressure.
• Tests current and older vehicles.
• Supplied with two gages:
• 0-100 PSI, 0-7 BAR and 0-700 kPa with rubber boot and hang-up hook.
• 0-50 PSI and 0-3.5 BAR for accurate low pressure applications.
• Includes adapters, hoses and clamps.
• Blow molded case with numbered positions for storage and easy access of components.
• Bleed-off valve with 6 feet of translucent hose to safely depressurize system after completion of testing.
• Complete illustrated instruction manual included.
• Supplied in a durable, plastic storage case with carrying handle.
53788 Double End Barbed Adapter Where vehicles require testing by splicing into 1/4˝,
5/16˝ or 3/8˝ fuel lines.
53850 Small Schrader Valve Test Ford Multi-port (EFI). For smaller Schrader valves.
Adapter for Ford
53903 Single End Barbed Adapter For vehicles requiring end of line testing with 1/4˝,
5/16˝ or 3/8˝ fuel line hose.
53904 48˝ Hose - 1/4˝ NPT Male x Quick Provides more mobility while monitoring fuel injection
Coupler Female pressure.
53908 Large Schrader Valve Test For larger Schrader valves found on GM and
Adapter for GM & Chrysler Chrysler Multi-port vehicles with 7/16”-20 threaded
test port.
57200 Honda Fuel Injection Pressure For vehicles with 6mm-1.00 Banjo Bolts found on
Test Adapter Honda, Acura & Sterling Multi-port (PGM-FI).
57230 Ford In-Line Spring Lock Fitting For spring lock fittings. Ford EFI.
Adapter
57260 Ford In-Line 5/16˝ Hair Pin Adapter For 5/16˝ hair pin connections. Ford CFI.
57280 GM & Chrysler In-Line 3/8” In-Line adapter for vehicles with 3/8˝ hair pins.
Hair Pin Adapter
57350 Banjo Bolt Adapter Kit For vehicles with 8mm-1.00, 10mm-1.00, 12mm-1.25
& 12mm-1.50 Banjo Bolts found on Asian & European
vehicles with Multi-port & Bosch AFC.
57650 GM Throttle Body Injection (TBI) In-Line Adapter – Replaces fuel filter with threads on
Fuel Pressure Adapter both ends.
57660 GM 2.2 Liter Fuel Injection 1992 & up such as Chevrolet Cavalier, Pontiac
Pressure Test Adapter Sunbird, Buick Skylark & Quad 4 equipped Pontiac
Grand Am (Non Multi-port).
57670 GM 2.5 & 5.7 Liter Fuel Injection For vehicles with quick connect fuel filters such as 2.5
Pressure Test Adapter Liter Oldsmobile Ciera 1989 & up; 5.7 Liter Chevrolet
Caprice 1991 & up (Non Multi-port).
58009 90° GM & Chrysler Swivel 90° Adapter. For multi-port vehicles having restricted
Adapter access to larger Schrader valves.
58010 90° Ford Swivel Adapter 90° Adapter. For vehicles having restricted access to
smaller Schrader valves (EFI).
58040 31/2˝ Gage 0-100 PSI, 0-7 BAR and 0-700 kPa with rubber boot
{
and hang-up hook
58600 11mm & 16mm Fuel Rail Pressure Chrysler, Dodge, Hyundai, Infiniti, Kia, Lexus,
Test Adapter Kit Mitsubishi, Nissan & Plymouth
58625 11mm Fuel Rail Pressure Infiniti, Kia, Lexus & Nissan
Test Adapter
58650 16mm Fuel Rail Pressure Chrysler, Dodge, Hyundai, Mitsubishi, & Plymouth
Test Adapter
Fuel Injection Testing products on this page use quick coupling fittings
19
DIAGNOSTIC TOOLS FOR THE PROFESSIONAL
CARDED
33900
FUEL INJECTION PRESSURE TESTER
33900 - Works on GM and Chrysler vehicles same as Cat.
No. 33950, but on Fords, limited to older TBI systems not
equipped with small Schrader test valve. Supplied with large
gage only. Gage equipped with hang-up hook.
SUPPLIED IN
STORAGE POUCH
33980
FUEL INJECTION PRESSURE TESTER
WITH TWO GAGES IN MOLDED PLASTIC
STORAGE CASE
33980 - Same product as Cat. No. 33950 above but supplied
in a durable, plastic molded storage case with carrying
handle. Case measures 11¹⁄₄˝ x 7¹⁄₂˝ x 3˝ and has ample
space for additional adapters and parts.
24
TOOLS FOR THE PROFESSIONAL
DIAGNOSTIC
FUEL INJECTION PRESSURE TESTER ADAPTERS
The adapters below are for use with Cat. Nos. 33770, 33900, 33950, 33980, 36200, 36250 & 38000:
High Pressure EFI Ford In-Line Adapter with spring lock 37230
fittings (Included with Cat. No. 38000)
26 CARDED
TOOLS FOR THE PROFESSIONAL
DIAGNOSTIC
AUTOMATIC TRANSMISSION AND 34550
ENGINE OIL PRESSURE TESTER WITH
TWO GAGES
34550 - Check oil pressure in automatic transmissions and
engines. Adapters provide coverage of most domestic and
imported cars and light trucks including late models.
Supplied with two gages calibrated as follows:
Large Gage Small Gage
0-600 PSI 0-50 PSI
0-4,000 kPa 0-3.5 BAR
0-40 BAR
Large gage can be used for all applications and has a hang-up
hook. Use small gage for more accurate reading of engine oil
pressure where maximum oil pressure does not exceed
50 PSI (3.5 BAR). Includes 6 feet of oil proof hose and
10 assorted fittings. Supplied in durable vinyl pouch for store
display and tool box storage. Full instructions provided.
Now includes an adapter with two grooves, Cat. No. 34573,
for use on most Asian and some American and European NOTE: D
o not use small gage to test
vehicles. Thread size is 8mm-1.00 Male x 1/8˝ NPT Female. automatic transmission pressure.
27
DIAGNOSTIC TOOLS FOR THE PROFESSIONAL
33600
EXHAUST BACK PRESSURE TESTER
33600 - Test for clogged or obstructed catalytic converters and
mufflers. Fast and easy to use. Threads into Oxygen Sensor Port.
Kit includes 12mm and 18mm adapters to fit most domestic and
imported vehicles. Gage measures 2¹⁄₂˝ diameter and has dual
scale: 15 PSI and 1.00 Kg/Cm2. Hose is 41˝ long. No need to tap
into exhaust system then reseal holes afterwards. Packed in a
PACKED IN
STORAGE vinyl pouch for store display and tool box storage. Complete with
POUCH instructions.
33700
DELUXE VACUUM AND
FUEL PUMP TESTER
33700 - Widely used in motor diagnostic work. Check for leaky
intake manifold, clogged muffler and leaky, burnt or sticky
valves. Diagnose incorrect timing. Determine accurate fuel
pump pressure. Locate leaks in gas line. Readings shown and
interpreted on face of multi-colored dial. 3¹⁄₂˝ gage has English
and metric scales. Has range of 0-28 Inch (0-70 Cm) vacuum
and 0-10 PSI (0-0.7 Kg/Cm2) pressure. Complete with hose,
three fittings and operating instructions. Fuel pump specs by
manufacturer and model supplied.
PACKED IN
STORAGE POUCH
32000
STETHOSCOPE
32000 - Excellent technician’s aid designed to detect and locate
sources of abnormal noise. Allows technician to quickly find and
analyze the source of a problem in engines or other moving parts.
Sound is transmitted and amplified through a sensitive diaphragm.
Pinpoint worn or defective bearings. Locate cylinders with engine
knocks. Determine if any fuel injectors are hung-up or inoperative.
Suspected trouble spots can be reached with extension yielding
12˝ probe length.
CARDED
28
TOOLS FOR THE PROFESSIONAL
DIAGNOSTIC
FORD POWER STROKE DIESEL COMPRESSION TESTING SET 35750
Dedicated kit for testing the popular Ford Power Stroke engines. NEW
Set consists of Cat. No. 34700 and three diesel tester adapters
in a molded plastic storage case with carrying handle.
Instructions for each adapter are included.
30
TOOLS FOR THE PROFESSIONAL
DIAGNOSTIC
Continued from Page 30
TESTING CAT.
APPLICATION ENGINE PORT THREAD NO.
35150
Ford/Navistar 6.9L & 7.3L Glow Plug 10mm-1.00 34730
7.3L Turbo, Direct Injection (Power Stroke) Glow Plug 10mm-1.00 35250
Power Stroke 6.0L & 6.4L engines found Glow Plug 14mm-1.25 35650 35200
on F-250 through F-550 trucks and
International VT 365
2011 and up 6.7L Power Stroke V8 Glow Plug 8mm-1.00 35450
turbocharged engine found in F-Series vehicles 35250
6.6L, 7.8L, Bosch 21mm Injector N/A 35680
6.7L Super Duty Pickups from 2010 to Glow Plug 8mm-1.00 35740 35300
current (F-250 & F-350), Medium duty
trucks (F-450 & F-550)
Ford Tractor All Fuel Injector N/A 34800 35350
General 4.3L & 5.7L Glow Plug 10mm-1.00 34730
Motors 4.3L, 5.7L & 6.2L & 6.5L Turbo Glow Plug 10mm-1.00 35000 35400
Duramax 6.6L (2001-2005) Glow Plug 10mm-1.25 35550
6.2L & 6.5L V8 True Diesel (1982 - 2002) Glow Plug 10mm-1.00 35670
Duramax 6.6L (2005 and up) Glow Plug 10mm-1.25 35660 35450
Duramax ID415 17mm Injector N/A 35700
35500
Hatz Some models 17mm Injector N/A 35700
Hummer H1 Optimizer 6500 V8 Turbo (1992 - 2004) Glow Plug 10mm-1.00 35670
& 6.2L V8
35550
International D/DT 361, D/DT 429, DV 462, 21mm Injector N/A 34800
Harvester DV/DVT 550, D/DT 407, DT/DVT 573 or
35680
Isuzu 1.8L & 2.2L Glow Plug 10mm-1.25 34950
35600
Jeep Liberty 2.8L (2005) Glow Plug 10mm-1.00 35670
Kubota Various Glow Plug 8mm-1.00 35500
Various Glow Plug 10mm-1.25 35550
35650
D722, D902, D950, D1105, V1505, V2203 Glow Plug 8mm-1.00 35720
Lincoln 1984 & 1985 car models Glow Plug 12mm-1.25 34880*
Continental
Mark VII
35660
Mack Truck END 405, 457, 475, 510, 519, 605, 672, Fuel Injector N/A 34800
673, 674, 711, 864
ENDT 673, 675, 676, 865, 866 35670
Massey 4.203, 4.236, 4.248, 6.354, 8.540 21mm Injector N/A 35680
Ferguson
35680
Mercedes Cars & trucks with 24mm ports Fuel Injector 24mm-2.00 34740
Benz 12mm is for Model 300 & 300 Turbo Diesel Glow Plug 12mm-1.25 34780
from 1978 and the 250 & 350 Turbo models. & (Piggy-Back
18mm is for all regular Mercedes Benz 18mm-1.50 Style)
35690
engines & Model 300 prior to 1978.
2.7L Glow Plug 10mm-1.00 35670
Continued on Page 32
31
DIAGNOSTIC TOOLS FOR THE PROFESSIONAL
32
TOOLS FOR THE PROFESSIONAL
AIR LINE ACCESSORIES AND TIRE TOOLS
CUT-OFF WHEELS 94860
Abrasive reinforced wheels are ideal for automotive and autobody repair. Cut 94870
all ferrous materials with ease. Cut through clamps, hangars, sheet metal, angle 94890
iron, tubing, castings, mufflers and rusted bolts. Leaves clean edge. Easier and
safer to control than a torch, faster and less effort than a hacksaw. Wheels 94890P
comply with American National Standards Institute Code B7.1 (1968 Rev.) and 94900
OSHA. Rated at 25,000 RPM maximum speed. Pneumatic cutting tool should
have safety guard. Always wear eye and face protection.
94930
OUTSIDE CENTER HOLE
CAT. NO. DIAMETER THICKNESS DIAMETER HARDNESS PACKAGING
94860 3˝ 1/16˝ 3/8˝ X 5 per Card
94870 3˝ 1/16˝ 3/8˝ X 50 per Box
94890 3˝ 1/16˝ 3/8˝ X 100 per Box
94890P 3˝ 1/16˝ 3/8˝ X 100 per Shelf Bin
94900 3˝ 1/32˝ 3/8˝ T 5 per Card
94930 3˝ 1/32˝ 3/8˝ T 100 per Box
94950 - Allows any die grinder or drill to be turned into a cut-off tool using either
¹⁄₄˝ or ³⁄₈˝ I.D. Cut-Off Wheels. Cutting tools should have safety guard. Always wear
eye and face protection. CARDED
360° Swivel
14” Dual
Head Chuck
Internal Lock On Threads
98500
THE OILER
FILL HOLE SCREW
Standard Model. High quality & GASKET
aircraft aluminum stem, pre-
cisely machined to ¹⁄₄˝ NPT.
Oil reservoir is fabricated of AIR LINE
FROM
high impact plastic. Technician
COMPRESSOR
always sees oil supply and
oiling action. Holds three to OIL SPECIFIED
four days supply of oil. With METAL BY AIR TOOL
each use of the air tool, a fine STEM MANUFACTURER
mist of precisely metered oil VIAL
enters the air stream.
All internal moving parts
are coated and lubricated.
Use on all ³⁄₈˝ and ¹⁄₂˝ air
impact guns, air wrenches, AIR TOOL
body shop air tools and
pneumatic hammers.
¹⁄₄˝ NPT Female inlet x
¹⁄₄˝ NPT Male outlet. FILLING IS EASY THROUGH
AN EXTERNAL FILL HOLE!
FILL
VENT
36
TOOLS FOR THE PROFESSIONAL
AIR LINE ACCESSORIES AND TIRE TOOLS
DIAPHRAGM AIR REGULATOR 98350
• For precise air regulation at the spray gun.
• Delivers constant pressure.
• For use with all spray guns - conventional and HVLP.
• Small, lightweight and compact.
• Inlet: ¹⁄₄˝ NPT Male; Outlet: ¹⁄₄˝ NPT Female with swivel connector.
• 22 CFM capacity.
• True diaphragm regulator to prevent surges - not a cheater valve.
• Push/Pull lock to set pressure.
• Gage ranges: 0-160 PSI and 0-11 BAR. CARDED
• Glass lens.
37
AIR LINE ACCESSORIES AND TIRE TOOLS TOOLS FOR THE PROFESSIONAL
38 ALWAYS WEAR EYE, RESPIRATORY AND FACE PROTECTION WHEN USING THESE PRODUCTS.
TOOLS FOR THE PROFESSIONAL
AIR LINE ACCESSORIES AND TIRE TOOLS
LEVER ACTION BLOW GUN WITH 5 NOZZLES 99150
99150 - This kit includes a blow gun with 5 of the most popular
interchangeable nozzles. The blow gun has a convenient hang up
hook and is activated by smooth lever action. Use for blowing out
tubes and pipes or directing a fine stream of air. A versatile kit for
cleaning applications. Rubber tip provides a leak free seal and will
not mar painted surfaces. Tapered nozzles concentrate air and
permit access to confined areas. Chrome plated. Lever is vinyl
covered for comfort and easy gripping. ¹⁄₄˝ NPT Female inlet.
CARDED
FOUR PIECE BODY FOUR PIECE FRONT END FOUR PIECE MUFFLER/TAIL
SHOP CHISEL PAK PNEUMATIC TOOL AID PAK PIPE PNEUMATIC TOOL PAK
The most widely used pneumatic tool The essentials only. Contains one each of Roll Pak contains one each of 91050 Tail Pipe
aids. Handy roll pack contains one 91000 Tie Rod Tool, 91100 Bushing Remover, Cut-Off Tool, 91750 Inside/Outside Muffler
each 91250 Claw Ripper, 91350 91450 Tapered Punch and a 91400 7˝ Chisel. Cutter, 91300 Muffler Cut-Off Tool and a
Double Panel Cutter, 91400 7˝ Chisel Supplied in handy roll pack. 91400 7˝ Chisel.
and 91600 #1 Body Man Cutter.
ALWAYS WEAR EYE, RESPIRATORY AND FACE PROTECTION WHEN USING THESE PRODUCTS. 39
AIR LINE ACCESSORIES AND TIRE TOOLS TOOLS FOR THE PROFESSIONAL
A QUALITY LINE OF HEAVY DUTY .401˝ PARKER SHANK TOOLS FOR BODY SHOP, FRONT END, AND MUFFLER/TAIL PIPE WORK
CARDED
ALWAYS WEAR EYE AND FACE PROTECTION WHEN USING THESE PRODUCTS 41
AIR LINE ACCESSORIES AND TIRE TOOLS TOOLS FOR THE PROFESSIONAL
ECONOMY CHISELS
Excellent Quality, Popularly Priced!
A great combination of the chisels most often used by automotive and autobody technicians. Made to
exacting Tool Aid standards from alloy steel with .401˝ Parker shanks and covered by our “no questions
asked˝ warranty. Packaged in see-through vinyl pouches. Priced to sell!
42
TOOLS FOR THE PROFESSIONAL
AIR LINE ACCESSORIES AND TIRE TOOLS
.498˝ PARKER SHANK PNEUMATIC TOOLS
Tool Aid presents a selection of the most popular pneumatic tools with .498˝ Parker Shanks. These quality,
heavy duty tools are growing in use with volume shops, fleets, truck body rebuilders, front end shops,
salvage and wrecking yards, and heavy-duty spring shops.
CARDED
44 ALWAYS WEAR EYE AND FACE PROTECTION WHEN USING IMPACT TOOLS.
TOOLS FOR THE PROFESSIONAL
SUSPENSION & ALIGNMENT
10 LB. SLIDE HAMMER & PULLERS FOR FRONT 66370
WHEEL HUBS AND REAR AXLES
• Heavy duty 10 lb. Slide Hammer on Steel Shaft reduces effort, time and labor
to make a tough job easy
• Pullers fit 4, 5 and 6 bolt patterns for use on most domestic and imported cars
and light trucks
• Easily removes front wheel hubs and flange type rear axles
• Axle and Hub Pulling Adapter accepts other 5/8”-18 female threaded
pulling attachments
• Components include our Cat. Nos.: 66320, Axle & Hub Pulling Adapter; 66330,
Rear Axle Pulling Yoke; 66350, Front Wheel Hub Puller; 81001, Slide Hammer;
81002, Slide Shaft and 81007, Hand Grip
• Includes Forcing Screw and Hex Nut
45
SUSPENSION & ALIGNMENT TOOLS FOR THE PROFESSIONAL
Easy to use
in 3 steps:
1. Attach clamps to spring 2. Compress and remove cartridge 3. Complete repair or replacement
APPLICATIONS
AS A STEERING WHEEL AS A PEDAL DEPRESSOR, USE FOR:
HOLDER, USE TO: • Tune-ups • Engine diagnosis
•S ecurely hold the steering wheel • Brake jobs • Setting RPM
for toe-in/toe-out work • Fuel Injection cleaning • Air conditioning work
• Center the steering wheel • Alternator testing • Cylinder balance tests
• Clutch work
47
SUSPENSION & ALIGNMENT TOOLS FOR THE PROFESSIONAL
49
HAND TOOLS TOOLS FOR THE PROFESSIONAL
Available individually:
CAT. NO. DESCRIPTION
19701 Banjo Bolt Fluid Line Stopper
Adjusts and 19702 5/16” Fluid Line Stopper
locks to 3
positions Open Flare Type Fuel, Brake, A/C Line "O" Ring Type AC Line 19703 3/8” Fluid Line Stopper
19704 1/2” Fluid Line Stopper
Close
19705 5/16” Replacement Tips (Package of 2)
19706 3/8” Replacement Tips (Package of 2)
19707 1/2" & Banjo Bolt Replacement Tips
Fuel Line Banjo Fitting (Package of 2)
13000 SPIN-A-RATCHET
13100 Use these fingertip spinners to pre-tighten nuts and
bolts. Push into socket, spin to tighten position, put on
13200 ratchet and finish job. Cut labor time in ratcheting work.
13400 13000 Available in ¹⁄₄˝, ³⁄₈˝ and ¹⁄₂˝square drive sizes and as
13100 three piece set.
13200 CAT. NO. SIZE
13000 ¹⁄₄˝
13100 ³⁄₈˝
13200 ¹⁄₂˝
Ratchet not included
13400 (set of above)
CARDED
54
TOOLS FOR THE PROFESSIONAL
COLLISION REPAIR
PORTABLE WORK STAND 85800
Designed to hold large parts such as bumpers, hoods, doors, fenders and
glass. Can be moved easily and adjusted to desired height or width. Made
of strong tubular steel with thick foam padding to protect painted parts and
glass from being scratched. Rubber boots on legs prevent sliding. Folds up
for easy storage. Supplied unassembled in UPS-able carton.
55
COLLISION REPAIR TOOLS FOR THE PROFESSIONAL
56
TOOLS FOR THE PROFESSIONAL
COLLISION REPAIR
PICK AND FINISHING HAMMER 89000
89000 - Most popular body shop hammer. Designed to provide excellent
balance for close-in work and finishing. Flat, round face, 1¹⁄₄˝ diam. Pencil
point on 5¹⁄₄˝ drop-forged steel body.
BODY SPOONS
A complete line of the most popular spoons used for autobody repair. All are made of high grade steel, drop-forged,
heat treated and polished to high specifications. Equipped with our famous blue shock absorbing “Hang-It˝ soft
cushion, vinyl grip with molded finger grasp and hole for hanging. Grip may be removed for end hitting.
60
TOOLS FOR THE PROFESSIONAL
COLLISION REPAIR
DENT PULLER AND SLIDE HAMMER 81400
81400 - The largest selling and most economical body shop dent puller in the industry. 3 lb. slide weight
is mounted on ¹⁄₂˝ plated steel shaft. Famous blue vinyl hand grip over steel handle reduces
sting on technician’s hands and provides 100% grip. Broached hex in nose cone
locks pulling screw in place... ends breakage. Supplied with two hardened
pulling screws and “L˝ puller hook fabricated of aircraft
quality steel. Nose cone and shaft threads are ¹⁄₂˝-20.
1/2˝ Wrench
CARDED
89920
CARDED
CARDED
89790
64
TOOLS FOR THE PROFESSIONAL
COLLISION REPAIR
BUCKET OF EASY GRIP BRUSHES 17370
• Contains 12 each of the most popular brushes – brass, nylon and stainless
steel bristles
• Economically priced right
• Excellent for all types of cleaning applications
• Each brush is 3 x 7 rows with a hang-up hole in the handle. 7˝ overall length
• For use with cleaning solvents, thinners and chemicals
• Use the brass and stainless steel brushes where aggressive action is needed.
The nylon brush is used for milder cleaning action
• Polypropylene handles are molded for easy gripping
• Specially designed narrow head fits into hard to clean areas
END BRUSHES
True technician’s aids! Use to remove paint, carbon, rust, corrosion and weld scale. Excellent for body surface
preparation. Made with 0.020˝ high fatigue resistant steel wire. ¹⁄₄˝ shank fits all portable drills. For best brushing
results do not operate over 8,000 RPM. Maximum safe speed 20,000 RPM. Always wear safety eye protection.
67
COLLISION REPAIR TOOLS FOR THE PROFESSIONAL
Direction of Pull
17560 17550
LEVER BARREL PUMP LIFT ACTION BARREL PUMP
• Fits 15 – 55 gallon drums with • Lift action handle dispenses
1¹⁄₂˝ or 2˝ bung openings approximately 1 ˝ pints per complete
• For use with petroleum based stroke
non-corrosive fluids • Use to transfer petroleum based
• Curved discharge spout fluids such as lubricants,anti-
freeze, solvents, thinner and
• Long lasting Viton® seal
other non-corrosive liquids
• Dispenses approximately 10 oz. per
• Teflon® seal
stroke
• Fully adjustable suction tube fits
• Telescopic suction tube adjusts from 15, 30 and 55 gallon drums
19˝ to 35"
• Plated steel construction
• Zinc die cast head
• Curved discharge spout is removable
• Cushioned hand grip
• Bung adapter fits all standard drums
• Not for use with water
• Not for use with water
CARDED
DISPLAY PACKAGED
70
TOOLS FOR THE PROFESSIONAL
CATALOG ADDITIONS
18870
18850 18860 Terminal Crimper for Deutsch 18910
Weather Pack Terminals Terminal Crimper for Deutsch 6, 8 & 10 Gage Terminal Crimper for Weather
Crimping Kit 12 Gage Closed Barrel Terminals Closed Barrel Terminals Pack & Metri Pack Terminals
Page 6 Page 5 Page 5 Page 5
DISTRIBUTED BY:
DISTRIBUTED BY: