Hydel Poleline Cat 2018 PDF
Hydel Poleline Cat 2018 PDF
Hydel Poleline Cat 2018 PDF
Certified
PoleLine
Catalogue
• Transmission
• Distribution
• Utility Products
• Communication
Hardware
• Grounding
Equipment
When you think of Poleline Hardware Products,
you can count on HYDEL’s 50 years of service
and engineering to the Utility Residential,
Commercial and Industrial markets.
Anchors Distribution
Anchors ................................................ 5 Brackets for Cut Out
Cross-Plates and Square.......................... 6 Switches & Arrestors ........................... 28
Anchor Rods.......................................... 7 Cut Out Arrestor Brackets........................ 29-30
Rock Anchors ........................................ 8 Transformer Mounting............................. 31-33
Strain Yokes........................................... 34
Angle Braces
V Braces & Alley Arms ........................... 9 Insultors (Porcelain)
Strain, Suspension, Spool,
Braces Pin Type ................................................ 35
Hollow Structural ................................... 10
Grounding
Bolts Rods & Plates ........................................ 36
Machine Bolts........................................ 11-12
Grounding Connectors
Carriage Bolts ....................................... 13
Connectors ............................................ 37
Double Arming Bolts............................... 14
Thimble & Oval Eye Bolts........................ 15 Grounding
‘U’ Bolts ................................................ 16 Copper Clad Rods ................................. 38
Lag Bolts ............................................... 17 Plates & Boxes ....................................... 39
Gradient Mats & Staples......................... 40
Bolts & Bolt Eyes
Guying
Spool, Bolt Eyes, Angle .......................... 18
Guy Wire.............................................. 41
Clamps Aluminum Aluminum Tie Wire................................. 41
Deadend Stain Clamps ........................... 19
Guards
Type MSC-Iron Hot Dip Galvanized ......... 19
Straight & Flared.................................... 42
Angle Suspension Clamps ....................... 20
Guard Straps
Clamps Straps ................................................... 43
Guying Clamps...................................... 21 Aluminum Throat Clip (ATC) .................... 43
Clevises Guy Guards
Clevises ................................................ 22 Plastic/Steel .......................................... 44
Clamps ................................................ 25
Pole Top Hardware
Clamps & Pole Steps .............................. 26
Pole Top Pins, Angle Pins, etc. ................. 48
Cross Arm Braces Cross Arm Pins, Angle Pins, etc. .............. 49
Braces .................................................. 27 Pole Top Brackets, Side Post Brackets ....... 50
1
Index
Pole Insulators
Insulator Mounting Stubs and Angle Brackets 51
Pole Mounting
Pole Mounts & Pole Bands ........................ 52
Pole Bracing
Braces & Plates ...................................... 53
Preform Grips
Service Grips......................................... 54
Uniformed Guy End (Galvanized Steel) .... 54
Guy Thimbles: Hot Dip Galvanized Steel .. 54
Washers
Steel Square Flat ................................... 55
Hot Dipped Galvanized Square Curved ... 56
Round, Bevelled Washers........................ 57
Lock, Spur Washers................................ 58
Straps
Extension Straps .................................... 59
Clevis Extension Link............................... 59
Strain Plate Clevis .................................. 59
Racks
Screw Brackets ...................................... 60
Secondary Racks for Spool Insulators ....... 60
Secondary Racks - Heavy Duty ................ 61
Medium Duty Racks................................ 61
Underground Hardware
Underground Cable Racks ...................... 62
Formed Steel Hooks ............................... 62
Notes ..................................................... 63
GROUNDING
POLELINE &
2
POLELINE &
GROUNDING
3
1. WPT - pin type insulator 34 29. SP - strain plate 45
2. PT - pole top pin 47 30. GE - guy end 55
3. AT - angle poletop pin 48 31. WGS - guy strain insulator wet 34
4. CAP - cross arm pin 48 32. GP - guy plate 45
5. SW - square washer 56 33. BTE - bent thimble eye bolt 12
6. ANP - angle cross arm pin 48 34. EN - oval eye nut 46
8. CAB - cross arm brace 27 35. YG/GG/SGG - guy guard 43
9. SLA/SLM - straight line clamp 18 36. GU/GUC - guy clamp 21
10. CB - carriage bolt 10 37. ADT - double thimble anchor rod 4
11. 24236.TC - thimble clevis 22 38. UCF/UFA - flared U-cable guard 41
12. DG - distribution grips 24 39. 701/701.W - plastic/wood moulding 39
13. WSU - suspension insulator 34 40. 700 - ground electrode box 38
14. BE - bolt eye 15 41. AST - anchor rod-single thimble 4
15. LG/LF - lag screw 14 42. 725/758 etc. - groundrod connectors 36
16. CL - clevis w/insulator 22 43. B/G/CC - groundrods 35
17. WG - wedge grip 24 44. EX - expansion anchor 1
17A. SG - service grip 55 45. SA - screw anchor 4
18. TSR - triplex space rack 46. ASR - anchor rod-single roller 4
c/w 1085.D insulator 62 47. SAP - square anchor plate supp 3
19. E/NE - secondary rack 61 48. USC/UCA - U. cable guard straps 41
20. R - knob type rack c/w 1085.D insulator 62 49. 703 staples 39
21. CW - curved washer 57 50. AVB/AA - Angle V brace /Alley Arm 6
22. 34.GH - guy hook 44 51. HSC - Hollow structural cross arm 7
23. M - machine bolt 8-9 52. SBS - Side post brackets 49
24. DA - double arming bolt 11 53. BCA/LAB - Bracket cutout arrestor . 28
25. 541.SGF - sidewalk guy ftg 21 54. SY - Strain yokes 33
26. 540.SGF - sidewalk guy ftg 21 55. PTB, PTA, Pole top brackets 49
GROUNDING
4
ON PROOF
Anchors
ANCHORS
GROUNDING
POLELINE &
88135EX
5
Anchors
CROSS-PLATES AND SQUARE
Cross-Plate Anchor
Black Asphalt Coated
Cross-Plate anchors are formed from structural steel are
ribbed for extra strength and reinforcement. Plate edges
are flanged to resist creeping. Plates are welded at
right angles for maximum holding ability. Nut retainer is
provided to aid installation. These anchors are avail-
able with high-grade asphalt coating. 16CPA
Square Anchors
Hot dip Galvanized
Painted available upon request Gray or black
add suffix P
Nut retainer welded to bottom plate to provide
means of anchor rod recovery.
250SAP
6
Anchors
ANCHOR RODS
Cat. No. Diameter Holding Diameter Rod Holding Std. Pkg. Wt.-lbs./C
plate Strength Strength
Dry Clay – lbs.
634SA 6” 6500 # 3/4 5500 2 1050
810SA 8” 8000 # 1 8000 1 1900
634SA
Anchor Rods
Threaded anchor rods for all types of anchors.
Single thimble (AST); Double thimble (ADT);
C.S.A. Specification No. C-83 No. R1, R2, R3 and R14.
Cat.No.
Single Double Length Diameter Std.Pkg. Wt. lbs./ C
658AST 658ADT 6’ 5/8 5 750
758AST 758ADT 7’ 5/8 5 830
858ADT 8’ 5/8 5 930
634ADT 6’ 3/4 5 1010
734ADT 7’ 3/4 5 1160
834ADT 8’ 3/4 5 1320
Minimum breaking strength at thread root:
5/8” diameter - 15, 000 lbs.
3/4” diameter - 23, 000 lbs.
All anchor rods supplied with heavy square nuts.
GROUNDING
POLELINE &
658ADT
7
Anchors
ROCK ANCHORS
Rock Anchors
For solid rock or in stone or concrete walls. Made from 1” round steel, with drop forged eye, flat-
tened at the top.
C.S.A. Standard Drawing No. A-2
181RAW 30W
334RAE
8
Angle Braces
V BRACES & ALLEY ARMS
Angle V-Braces
Centre Ends
Cat.No. Size of Angle Span Drop Hole Size Hole Size Wt.-lbs./ C
37AVB 1-1/2 x 1-1/2 x 3/16 37 12 11/16” 9/16”
42AVB 1-1/2 x 1-1/2 x 3/16 42 12 11/16” 9/16” 830
48AVB 1-1/2 x 1-1/2 x 3/16 48 18 11/16” 9/16” 1,000
60AVB 1-1/2 x 1-1/2 x 3/16 60 18 11/16” 9/16” 1,160
3442AVB 1-3/4 x 1-3/4 x 3/16 60 18 11/16” 9/16” 1,300
3442AVB-13 1-3/4 x 1-3/4 x 3/16 60 18 13/16” 13/16” 1,300
3461AVB 1-3/4 x 1-3/4 x 3/16 60 18 11/16” 9/16” 1,330
3466AVB 1-3/4 x 1-3/4 x 3/16 66 20 11/16” 9/16” 1,500
3472AVB 1-3/4 x 1-3/4 x 3/16 72 18 11/16” 9/16” 1,510
72AVB 1-1/2 x 1-1/2 x 3/16 72 22 11/16” 9/16” 1,300
72AVB-2 1-3/4 x 1-3/4 x 3/16 72 22 13/16” 13/16” 1,350
Provides support for heavy crossarms.
11/16” holes for pole mounting.
Other sizes available upon request.
Add suffix 13 where end holes must be 13/16”.
Spread of span is measured from hole centres.
42AVB
Cat.No. Size of Angle Inches Length Feet Wt.-/lbs (100 pcs.) Std. Pkg.
52AA 1-3/4 x 1-3/4 x 3/16 5 1100 5
62AA 1-1/2 x 1-1/2 x 3/16 6 1300 5
72AA 1-3/4 x 1-3/4 x 3/16 6 1465 5
84AA 1-3/4 x 1-3/4 x 3/16 7 2100 5
GROUNDING
POLELINE &
72AA
9
Braces
HOLLOW STRUCTURAL
4490HSC
GROUNDING
POLELINE &
10
Bolts
MACHINE BOLTS
T
GROUNDING
POLELINE &
1258M
11
11
Bolts
MACHINE BOLTS
T
GROUNDING
POLELINE &
1258M
12
Bolts
CARRIAGE BOLTS
Carriage Bolts
Hot dip galvanized complete with hexagon nuts. C.S.A. Drawing B-33.
Dimensions
Cat.No. (D)iameter (L)ength (T)hread Length Std.Pkg. Wt.-lbs./C
3/8” Diameter Minimum Breaking Strength 4,500 lbs.
1538CB 3/8 1-1/2 1/2 50 12
2538CB 3/8 2-1/2 1 50 14
3538CB 3/8 3-1/2 1 50 15
438CB 3/8 4 1 50 16
4538CB 3/8 4-1/2 1 50 17
538CB 3/8 5 1 50 19
5538CB 3/8 5-1/2 1 50 20
638CB 3/8 6 1 1/4 50 22
1/2” Diameter Minimum Breaking Strength 8,500 lbs.
412CB 1/2 4 1-1/4 50 32
4512CB 1/2 4-1/2 1-1/4 20 33
512CB 1/2 5 1-1/4 20 35
5512CB 1/2 5-1/2 1-1/4 20 38
612CB 1/2 6 1-1/2 20 42
5/8” Diameter Minimum Breaking Strength 13, 500 lbs.
358CB 5/8 3 1-1/2 25 46
4558CB 5/8 4-1/2 1-1/2 25 58
658CB 5/8 6 1-3/4 25 70
1058CB 5/8 10 1-3/4 25 102
1258CB 5/8 12 1-3/4 25 115
Other sizes available upon request.
L
GROUNDING
POLELINE &
13
13
Bolts
DOUBLE ARMING BOLTS
1658DA
POLELINE &
14
Bolts
THIMBLE & OVAL EYE BOLTS
1058TE 1058BTE
Oval Eye Bolts
Hot dip galvanized Bolts 6” and longer have cone points.
Eye Dimensions (A x B) for 1/2” bolt: 1 x 1-1/2; for 5/8 and 3/4” bolts: 1-1/2 x 2
1058OE
15
15
Bolts
“U” BOLTS
“U” Bolts
Complete with 4 hexagon nuts. Minimum order quantities required.
Minimum
Dimensions-Inches Breaking
Cat. No. Size A-Inches B C D Strength Std.Pkg. Weight/100
6310U 3/8 2-5/8 2-1/16 1 8,000 lbs. 100 35
6320U 3/8 3-1/8 2-5/16 1 8,000 lbs. 100 40
6330U 3/8 4 2-13/16 1-1/2 8,000 lbs. 100 47
6421U 1/2 2-1/2 1-1/2 1-1/4 14,000 lbs. 100 63
6451U 1/2 3 1-1/2 1-1/4 14,000 lbs. 100 71
6461U 1/2 4 2 1-1/2 14,000 lbs. 100 84
6551U 5/8 3 1-1/2 1-3/4 25,000 lbs. 50 122
6552U 5/8 3-5/8 1-3/4 2 25,000 lbs. 50 132
6555U 5/8 4 2 2 25,000 lbs. 50 142
6661U 3/4 4-1/2 3 2-1/2 36,000 lbs. 25 220
6663U 3/4 5-1/2 2-3/8 2-1/2 36,000 lbs. 25 250
6665U 3/4 6 2-3/8 2-1/2 36,000 lbs. 25 295
6750U 7/8 5 2-1/2 2-1/2 50,000 lbs. 15 364
6760U 7/8 6 2-3/4 3 50,000 lbs. 15 405
6770U 7/8 7 3 3 50,000 lbs. 15 446
6850U 1 5 3 2-1/2 66,000 lbs. 10 507
6860U 1 6 3-1/8 3 66,000 lbs. 10 560
6870U 1 7 3-1/4 3 66,000 lbs. 10 613
D
C
A
GROUNDING
POLELINE &
V6661
16
Bolts
LAG BOLTS
338LG
17
17
Bolts & Bolt Eyes
SPOOL, BOLT EYES, ANGLE
Spool Bolts
Used with spool insulators 355WSPG (not included). Flats on Collar provided for applying wrench.
Cat.No. Diameter L L1 Std.Pkg. Wt.-lbs./ C
858SB 5/8 13-1/2 8 50 180
1058SB 5/8 15-1/2 10 50 195
1258SB 5/8 17-1/2 12 20 210
1458SB 5/8 19-1/2 14 20 225
L1
1258SB
Bolt Eye
For attachment to either or both ends of a double arming bolt.
Cat.No. L Slot Std. Pkg. Wt.-lbs./C
111BE 1 11/16 25 100
113BE 1 13/16 25 100
111BE
Angle Thimble Eyelet
-Drop forged steel
-Bent at 45° angle
-Used to assemble upper end of guy on ground before raising it to the pole top.
Wt-lbs.
Cat.No. Bolt Dia. Inches Strand Dia.Inches Strength (lbs.) Std. Pkg. (100 Pcs.)
111ATE 11/16 3/16 TO 1/2 12400 50 134
113ATE 13/16 3/16 TO 1/2 18300 50 128
GROUNDING
POLELINE &
18
Clamps Aluminum
477SLA 93SLA
GROUNDING
POLELINE &
19
19
Clamps Aluminum
20
Clamps
GUYING CLAMPS
212GU 358GU
558MC 7458CMC
540SGF 541SGF
21
21
Clevises
Steel Clevises
Cat.No. D L W Steel Section Description Std.Pkg. Wt.-lbs./ C
222CL 11/16 2 2-1/4 11ga x 1 20 38
414CL 11/16 4-1/4 2-1/4 3/16 x 1-1/2 25 100
517CL 11/16 5-1/4 3-1/8 3/16 x 1-1/2 25 120
212CNW 11/16 2-1/2 2-1/4 3/16 x 1-3/4 C/W Wet insulator 25 140
314CL 11/16 4 3-1/4 1/4 x 2 10 220
314CLU 11/16 3-1/2 3-1/4 1/2 x 1-1/4 Channel Type 25 160
1316CL 11/16 3 1-3/16 1/4 x 1/2 25 180
114CL 13/16 2 1-1/4 3/8 x 2 Bolt head clevis 25 190
414CL 9/16 4-1/4 2-1/4 3/16 x 1-1/2 25 100
414CL1 11/16 4-1/4 2-1/4 3/16 x 1-1/2 25 100
314CLU-OH 13/16 3-1/2 3-1/4 1/2 x 1-1/4 Channel Type 25 160
24236TC 2-3/16 3/4 10 ga. “pig’s ear”tens. 10M # yield 6M # 50 80
214CLB 11/16 4-3/4 2-1/4 11 ga & 1/4 Swivel clevis 25 105
214CLA 11/16 4-3/4 2-1/4 11 ga & 1/4 Straight clevis 25 105
214CL 11/16 4-3/4 2-1/4 11 ga & 1/4 Clevis only c/w Insulator 25 120
2314CL 11/16 8 3-1/4 1/4 x 2 Double clevis 20 290
All Clevises accommodate Spool Insulators #1606WSPG and #355WSPG, see page 30
D
W 5/8
D L W
L W
222CL 314CLU 212CNW 24236TC
4 3/4
W L
1316CL 214CLB 217U 2314CL
2 3/4
GROUNDING
POLELINE &
7/16
Also available
with 13/16 Bolt 4 1/4
114CL 414CL1 517CL 717CL
22
Bracket Adapters
MOUNTING
8 1/2
9/16
2 1/2” 85MBA
8”
925ITM
GROUNDING
POLELINE &
23
23
Communication Hardware
WEDGE GRIPS & DRIVE HOOKS
Drive Hook
Hot dip Galvanized. C.S.A. Drawing No. H-3.
765DH
2 3/4
7/16
4 1/4
717CL
Wedge Grips
Range Blackburn
Cross
Flexible Wire Reference
Cat.No. Bail No. Stranded Solid A.C.S.R. Std.Pkg. Wt.-lbs./ C (Solid Bail)
14WG 14WGF 1–4 1– 4 2-6 50 17 W62AA
103WG 103WGF 1/0-3 1– 2 1/0 – 4 50 32 W20AA
4020WG 4020WGF 4/0–2/0 - 4/0 – 1/0 50 35 W40AA
GROUNDING
POLELINE &
14WG 14WGF
24
Communication Hardware
CLAMPS
Kling Clamp
Made from 16 gage galvanized steel complete with 3/8 bolt, 2 washers and hex nut.
516CK
Wire Drop Clamp
Hook style. Can be used without U bolt.
2513
Wire Drop Clamp
Oval Eye Style. Can be used without U Bolt.
2515
Neutral Clamp
- Aluminum alloy suspension clamp is designed to support triplex secondary conductors at the pole.
- One clamp section is tapped for mounting on a 5/8” through bolt.
- Allows use of clamp on shallow angles up to 10 degrees as well as straight runs.
240TSC
25
25
Communication Hardware
CLAMPS & POLE STEPS
Cable Sizes
Cat.No. Maximum Minimum Std.Pkg. Wt.-lbs./ C
4468PGC-38 4/0-4/0 Str # 6 SOL - # 8 SOL 100 56
Clamp 1CDW
Lashing Wire Clamp - Galvanized formed steel clamp used to terminate the cable lashing wire.
1 3/4
610DC 1 1/4
26
Cross Arm Braces
BRACES
H2
H1
L
28CAB
GROUNDING
POLELINE &
27
27
Distribution
BRACKETS FOR CUT OUT SWITCHES &
ARRESTORS
Mounting Brackets For Cutouts, Arrestors and Switches
(Pole Mounting)
Cutout/arrestor bracket comes with 1/2” threaded bolts, lockwashers and nuts for equipment
mounting.
Cat.No. 15BCA - with one11/16” mounting hole, made from channel for pole mounting, 14-1/8”
long, slanted tip.
Cat.No. 152BCA - with one additional 7/16” mounting hole, straight tip.
Cat.No. 201BCA – As above, but 20” long and welded construction.
Cat.No. 243BCA - 24” long, one 11/16” mounting hole, welded construction, slanted tip.
251LAB Structural Tubing 20.00” 1.57” 1.00” 8.07” 1.00” 6.00” 4.33” Straight 1/2-13 x 3
252LAB Structural Tubing 20.00” 1.57” 1.00” 8.07” 1.00” 6.00” 4.33” Straight 1/2-13 x 2
H2 L1 L2
H
H1
L
GROUNDING
POLELINE &
28
Distribution
CUT OUT ARRESTOR BRACKETS
GROUNDING
POLELINE &
29
29
Distribution
CUTOUT & ARRESTOR BRACKETS
H2
L
L1
L2
H1 385CMB 387CMB
1/2 1/2
L
3/4 3/4
GROUNDING
POLELINE &
L1 L2
411PMB 415PMB
30
Distribution
TRANSFORMER MOUNTING
Dimensions
Cat.No. A B C D E Std.Pkg. Wt.-lbs./each
40TCM 29-7/8 11-3/8 15 - 23-1/2 1 40
65TCM 34-1/4 12-7/8 22 15 27-5/8 1 65
100TCM 34-3/8 12-1/8 29 22 37-1/2 1 100
* 654TCM 34-1/4 12-7/8 22 15 27-5/8 1 65
652TCM 34-1/4 12-7/8 22 15 30-1/2 1 67
Holes are provided for grounding clamps, insulator pins and stabilizing braces.
Stabilizing brackets available upon request.
*with stabilizer bracket
D E
C
B
A
Stabilizer Bracket 65TCM
Dimensions
Cat.No. A B C D Std.Pkg. Wt.-lbs./each
AH370TM 36 30 6 2 1 40
AH349TM 35 29-11/16 6 2 1 65
GROUNDING
POLELINE &
C
D
B
A
31
31
Distribution
TRANSFORMER MOUNTING
95UMB (Kit)
11/16 x 2-3/4
12” 13/16 Dia
GROUNDING
POLELINE &
15” 14”
1/4” Thk
15VAP 14HAP
32
Distribution
TRANSFORMER MOUNTING
95UMB
9/16”
13/16”
Variable
GROUNDING
POLELINE &
90º
to
110º
33
33
Distribution Hardware
STRAIN YOKES
Strain Yokes
Used on transmission lines to suspend 2 wires from a suspension insulator. Standard design has 3
holes only. Additional holes can be provided on request.
- Customized yoke plates available upon request.
H1 H
L1 132SY
34
Insulators (Porcelain)
STRAIN, SUSPENSION, SPOOL, PIN TYPE
Wet Insulators
Minimum ANSI
Cat. No. K.V.L.F Flashover Flashover Nominal Pin Pin Wt.-Lbs. Class
Hydel CdnPorc COB L (“) W (“) (Dry) (Wet) KV Diameter Height Std.Pkg. / C No.
Spool Insulator (WSPG):
1606WSPG 2011 ---- 2-1/8 2-1/4 20 8/10 8 (vert) 1/2 120 50 51 53-1
10 (hor)
355WSPG 2012 ---- 3 3-1/8 25 12/15 12 (vert) 5/8 50 50 126 53-2
15 (hor)
Guy Strain Insulator (WGS):
502WGS 502 3-1/2 2-1/2 25 12 5/8 5/8 50 50 100 54-1
504WGS 504 31504 4-1/4 2-7/8 30 15 4.4 1/2 40 50 170 54-2
506WGS 506 32506 5-1/2 3-3/8 35 18 6.6 5/8 20 25 240 54-3
451WGS 451 31352 6-3/4 3-1/2 40 23 6.6 5/8 20 25 455 54-4
Pin Type Insulator (WPT):
505WPT 28085 100231 3-1/4 3-3/4 50 25 7.2 1 3-3/4 32 164 ----
555WPT 555 12847 3-1/4 3-3/4 50 25 7.2 1 3-3/4 32 154 55-2
5916WPT 5916.Q 38148 3-3/4 4-3/4 65 35 13.2 1 4-3/4 24 238 55-3
2783WPT 2783.Q 38149 4-1/2 5-1/2 70 40 13.2 1 4-3/4 18 350 55-4
2785WPT 2785.Q 38151 4-5/8 7 85 45 15 1 6 8 600 55-5
3930WPT 3930.Q 38222 6-1/4 9 110 70 23 1-3/8 7 3 1200 56-2
4575WPT 4575.Q 38223 7-1/2 10 1/2 125 80 36 1-3/8 8 3 1900 56-3
4830WPT 4830.Q 38255 12 140 95 36 1-3/8 10 3 2935 56-4
Suspension Insulator (WSU):
26434WSU 28674 42399 6-1/4 4-1/4 50 30 6 5/8 6 630 ----
8080WSU 28676 32433 5-1/2 6 60 30 6 5/8 6 680 52-1
6500WSU 6500 32439 5-3/4 10 80 50 16 5/8 6 1200 52-4
35
35
Grounding
RODS & PLATES
3410G
Grounding Plate
One grounding plate. One ground connector. Shallow pit required. No power equipment required.
Ground plates are easy to carry and transport. One ground plate weighs only 11 lbs. each. Pit in
which ground plate rests must remain open until inspection has taken place.
1016GPGC
36
Grounding Connectors
CONNECTORS
Connectors
(Galvanized Steel)
Cat. No. Size Pkg. Qty. Wt.-lbs./ C
712 1/2” rods 50 65
725 5/8-3/4 rods 50 65
710 3/4 -1” rods 50 70
714R 1/2” strand 50 45
Connector (Malleable Castings)
758 5/8-1” rods 100 20
758C 5/8-1” bronze 100 20
729C 120CU
Ground Rod Driver
– is made of 1.1/2” double extra heavy steel pipe 4’ with a steel plug doweled & welded in the
top end.
Cat.No. Size Pkg. Qty. Wt.-lbs/ C
780 5/8-3/4” 1 2700
Ground Rod Driver Extension
781 5/8 x3/4” 1 1500
Sectional threadless Coupling for Galvanized threadless Rods
GROUNDING
POLELINE &
34 SGC
37
37
Grounding
COPPER CLAD RODS
58SC 34DS
38
Grounding
PLATES & BOXES
791 790
Inspection Grounding Boxes
Cat.No. Size Std.Pkg. Wt.-lbs./C
700 10” diameter. x 12” deep (Hot dip Galvanized) 5 1200
724 10” diameter. x 24” deep (Hot dip Galvanized) 1 2400
770 10” diameter. x 12” deep (made from Galvanized Steel) 5 1200
Also 700A, 770A etc. for assembled units.
711R Rectangular Inspection Box 6-1/2” x 11-1/2” x 10” 1 1000
711 700
Ground Wire Clips
- Made from 1/8” x 3/4” mild steel
- Used to fasten ground wires on steel structures
- Accommodates conductor range of 1/0 to 2000MCM AWG stranded copper
A R
GROUNDING
POLELINE &
D 2525GSC
39
39
Grounding
GRADIENT MATS & STAPLES
6466GCM 2AWGC
40
Guying
GUY WIRE
Guy Wire
C.S.A. standard guy strand formed from 7 individual strands and hot dip galvanized
(4 immersion).
Guy Wire
4TWA
41
41
Guards
STRAIGHT & FLARED
U-Cable Guards
For the protection of rising cable at the lower end of poles. Made from Hot dip galvanized 14
gauge Steel or 1100 grade aluminum to C.S.A. drawing No. G-3, specification C-83.
Made in 2 styles: Straight (UC & UCA) and flared (UCG & UFA). Flared design will fit over under-
ground duct without the need of an adapter. Throat clips (ATC) to round off sharp edges at the top
of cable guards are also available.
8214UC
42
Guard Straps
STRAPS
Straps
Galvanized and Aluminum
Straps
Cat.No. Cat.No. Wt.-lbs./ C Wt.-lbs./ C
(Steel) (Aluminum) L W Std.Pkg. (Steel) (Aluminum)
Straps (SUC & SCA):
34SUC 34SCA 3/4 x 1/8 3/4” 200 12 4
114SUC 114SCA 3/4 x 1/8 1-1/4” 200 15 5
214SUC 214SCA 1 x 1/8 2-1/4” 100 24 8
314SUC 314SCA 1 x 3/16 3-1/4” 100 60 20
334SUC 334SCA 1 x 3/16 3-3/4” 50 70 23
414SUC 414SCA 1 x 3/16 4-1/4” 50 80 26
50SUC 50SCA 1 x 3/16 5” 25 90 30
60SUC 60SCA 1 x 3/16 6” 25 100 36
L W
214SCA 314SUC
314ATC
43
43
Guy Guards
PLASTIC/STEEL
Guy Guards
Made from polyethylene (YG) or 14 gauge galvanized steel (SGG)
2YG
7SGG
GROUNDING
POLELINE &
44
Guy Hooks
Guy Hooks
34GH made of ductile iron for use with 5/8” or 3/4” bolt. May be used for down guying
attachment. The Guy strand loop may be made on the ground to simplify installa-
tion. The suffix “C” signifies less spurs (for concrete poles).
34GH
234GH
GROUNDING
POLELINE &
2GH
45
45
Guy Plates
STRAIN PLATES
5/32”
1/4”
1448SP
GROUNDING
POLELINE &
46
Nuts
EYE, THIMBLE, SQUARE, HEX
Eye Nuts
Hot dip galvanized. Used in Conjunction with oval eye bolts. Oval Eye and Thimble Eye
34EN 34STN
Nuts
Hot dip galvanized and tapped oversize.
58NS 58NH
34NS 34NH
47
47
Pole Top Hardware
POLE TOP PINS, ANGLE PINS, ETC.
241PT
B
D
T
2415PT
L L1
GROUNDING
POLELINE &
64AT
48
Pole Top Hardware
CROSS ARM PINS, ANGLE PINS, ETC.
B
T
L
D
6623CAP 6002CAP
L1
CAP
GROUNDING
POLELINE &
49
49
Pole Top Hardware
POLE TOP BRACKETS, SIDE POST BRACKETS
Minimum
Rated
Cat.No. Strength L H1 H2 Slot L2 L1
1544PTB 2500 lbs. 15 13/16 11/16 11/16 5-1/4 5-1/4
1568PTB 2500 lbs. 15 7/8 11/16 13/16 5-1/4 5-1/4
1568PTA 2500 lbs. 15 13/16 11/16 13/16 5-1/4 5-1/4
1568PAO 2500 lbs. 15 13/16 13/16 13/16 5-1/4 5-1/4
1544PTB-78ME 15 15/16 13/16 13/16 5-1/4 4-1/2
1568PTO-15 2500 lbs. 15 15/16 13/16 13/16 6 6
1544PTB13 2500 lbs. 15 13/16 11/16 13/16 5-1/4 5-1/4
1568PTO 2500 lbs. 15 7/8 13/16 13/16 5-1/4 5-1/4
4144PTB 41 7/8 11/16 11/16 5-1/4 5-1/4
Other sizes available upon request.
L2
H1
15 L
15 L
H2
13/16”
slot L1
1544PTB & 1568PTB 1544PTA 1544PTB 1544PTA
Side Post Bracket
Cat.No. Minimum Rated Strength Std.Pkg. Wt.-lbs./ C
3SBS 2800 lbs. 5 750
9SBS 2800 lbs. 5 1130
9SBP c/w Plate 5 1400
175SBSO - 5 1800
175SBP c/w Plate flush 5 2100
175SBP-1 c/w Plate offset 5 2100
GROUNDING
POLELINE &
50
Pole Insulators
INSULATOR MOUNTING STUDS
AND ANGLE BRACKETS
Mounting Studs for Insulators
3/4 x 10 UNC threads minimum tensile 20,000 lbs.
L L
D
758LMS 13434LMS
Brackets Angle
Cat.No. Extension Std.Pkg. Wt.-lbs./100
814AB 8” 1 700
814AB
GROUNDING
POLELINE &
51
51
Pole Mounting
POLE MOUNTS & POLE BANDS
Dimensions
A B C Rod Plate
Cat. No. Inches Inches Inches Diameter Thickness Std.Pkg. Wgt./Set
41PRA 48 7.86 30 1” 1/2” One set 65
61PRA-1 70.875 7.88 47.25 1” 1/2” One set 93
B C
61PRA-1
7124HPB
52
Pole Bracing
BRACES & PLATES
Bracing
Cross bracing hardware-for
4” x 4” braces- through bolts
not included. 44CBH
16PBP
3830PBP
GROUNDING
POLELINE &
53
53
Preform Grips
SERVICE & DEADEND GRIPS
Service Grips
Diameter Colour Cross Reference
Cat.No. Range ASCR Std. Code Reference Wt.-lbs./ C Std. Pkg. Name
Preforms For Triplex (Service Grip Dead End)- Galvanized Steel (Catalogue number indicates length in inches)
10SG .167 - .198 6 Blue 10 GSDE 8 200 10 SSG
13SG .225 - .257 4 Orange 13 GSDE 13 100 13 SSG
14SG .258 - .289 2-3 Black 14 GSDE 16 100 14 SSG
15SG .290 - .325 2 Red 15 GSDE 18 100 15 SSG
19SG .361 - .400 1/0 Yellow 19 GSDE 38 50 19 SSG
21SG .401 - .450 2/0 Black 21 GSDE 42 50 21 SSG
23SG .451 - .510 3/0 Orange 23 GSDE 45 50 23 SSG
26SG .511 - .580 4/0 Red 26 GSDE 52 50 26 SSG
Preforms For Bare ACSR (Distribution Grip Dead End) - Aluminum (Catalogue number indicates length in inches)
22DG .228 - .264 4 Orange Swan DG 4541 15 50 22 ADN
24DG .289 - .316 2 Red Sparrow DG 4542 20 50 24 ADN
28DG .364 - .398 1/0 Yellow Raven DG 4544 27 40 28 ADN
31DG .410 - .447 2/0 Blue Quail DG 4545 31 30 31 ADN
35DG .460 - .502 3/0 Orange Pigeon DG 4546 60 25 35 ADN
37DG .516 - .563 4/0 Red Penguin DG 4547 60 25 37 ADN
28DG
3016GE
Guy Thimbles: Hot dip Galvanized Steel
Cat.No. Strand Std.Pkg. Wt.-lbs./ C
38GT 3/8” 250 10
12GT 1/2” 250 22
GROUNDING
38GT
54
Washers
SQUARE FLAT WASHERS
Steel Washers
Square Washers: Hot dip Galvanized. C.S.A. Drawing No. W-1.
Other sizes and thicknesses available (thicknesses up to 5/8”).
1433SW13
GROUNDING
POLELINE &
55
55
Washers
SQUARE CURVED WASHERS
Curved Washers
Hot dip Galvanized. C.S.A. Drawing No.W-2
Other sizes and thicknesses available upon request.
1433CW13
56
Washers
ROUND, BEVELLED WASHERS
Round Washers
Hot dip Galvanized.
Bolt Size
Cat. No Washer Size Thickness Hole Diameter Machine Carriage Std. Pkg. Wt.-lbs./ C
78RW 7/8 diameter 5/64 3/8 5/16 5/16 500 1.0
100RW 1 diameter 7/16 7/16 3/8 3/8 500 1.6
114RW 1 1/4 diameter 5/64 1/2 7/16 3/8 500 3.0
138RW 1 3/8 diameter 7/64 9/16 1/2 3/8 500 4.2
134RW 1 3/4 diameter 1/8 11/16 5/8 1/2 500 8.4
200RW 2 diameter 1/8 13/16 3/4 5/8 500 14.0
200RW
Bevelled Steel Washers
Malleable iron, Hot dip Galvanized.
58112BW
Centering Washers
Aluminum
1116CWM
Fender Washers
Zinc plated. These special size washers have an extra wide bearing surface.
3815FW, 14114FW
57
57
Washers
LOCK, SPUR WASHERS
34LW 58LW
Spur Washers
Generally used with crossarm pins.
Cat.No. Bolt Size-Inches Wgt./100
12SPW 1/2 9
58SPW 5/8 10
34SPW 3/4 10
Spur Washer
Humpback Cotter Pins
Cat. No. Bolt or Pin diameter Material Std. Pkg. Wt.-lbs./ C
3812HCB 1/2” Brass N/A .85
58HCS 5/8” Stainless N/A 1.25
58HCB 5/8” Brass N/A 1.70
3478HCS 3/4” & 7/8” Stainless N/A 2.5
Straight cotter pins also available upon request.
Cotter Pins
Button Head Pins (Rivets)
For use with spring type cotter pin.
Cat. No. Length Diameter Std. Pkg. Wgt./100
13458BH 1-3/4” 5/8” 50 26
2558BH 2-1/2” 5/8” 50 33
GROUNDING
POLELINE &
43458BH
58
Straps
EXTENSION & STRAIN
Extension Straps
Used to provide extra clearance for dead ending applications. Made from 1.3/4 x 1/4 steel.
Hot dip galvanized. Minimum breaking strength 8, 000 lbs. Diameter holes 11/16”.
1625ESA made from 1-1/2 x 1/4 material.
Cat. No. L L1 Hole Size Std.Pkg. Wt.-lbs./ C
6ES 6 7-1/2 11/16 100 90
8ES 8 9-1/2 11/16 25 110
10ES 10 11-1/2 11/16 50 135
18ESA 18 19-1/2 11/16 25 200
1625ESA 16-1/4 18 11/16 25 300
L1
L1
L
L
6ES 1625ESA
Clevis Extension Link
13/16” inside clevis – 5/8” pin – 5/8” tongue width
Cat.No. Extension Size- Inches Std.Pkg. Wgt./100
1058CEL 10 25 325
11/16 13/16”
(spacing)
10”
1058CEL
Strain Plate Clevis
Provides additional clearance between primary conductor and ground. Ring fills or spacer washers
not included. Strap section 3/16 x 1-1/2. Other sizes available on request.
Cat. No. L L2 Std. Pkg. Wt.lbs./ C
9SPC 9 7-1/2 25 120
15SPC 15 13-1/2 25 215
21SPC 21 19-1/2 25 295
29SPC 29 27-1/2 25 370
335SPC 33-1/2 32 25 460
GROUNDING
L
POLELINE &
L2
21SPC
59
59
Racks
SPOOL RACKS & SCREW BRACKETS
Screw Brackets
Cat. No. LS W D Std. Pkg. Wt.-lbs./ C Description
Screw Insulator & Screw Brackets:
211D 3 2 3/4 50 70
13712DSS 3-1/4 3-5/8 1 25 80 1/4” SS cotter pin
W
D
LS
211D 13712DSS
322NEH 326E
60
Racks
SECONDARY RACKS
1085D
Medium Duty Racks
- 11/16 mounting holes.
- complete with Insulators (1606WSP).
Cat.No. No. of Wires Overall Length Width Spacing Std. Pkg. Wt.-lbs./ C
1172E 2 15-1/2 2-5/8 8 5 420
1173E 3 23-1/2 2-5/8 8 5 690
1174E 4 31-1/2 2-5/8 8 5 960
Clevis size - 2 5/16 high x 1 3/4 wide.
GROUNDING
POLELINE &
1085D
61
61
Underground Hardware
CABLE RACKS & HOOKS
L2
L
L1
14UCR 14UCR
18FSH
62
63
63
Head Office & Warehouse
206 Great Gulf Drive
Vaughan, Ontario L4K 5W1
www.circahydel.com
Hydel Representatives
Alberta Quebec
Call Hydel Head Office L.T. Marketing Inc.
113 Avenue Gun
Point Claire, QC H3R 3X2
Saskatchewan
Electra Sales Ltd. www.ltm.ca
1810 East Turvey Road Tel: (514) 630-4350
Regina, SK S4N 2G7
www.electraselesltd.ca
Atlantic Canada
Tel: (306) 791-0266 Munden Enterprises Ltd.
2 Bluewater Road, Suite 150
Bedford, NS B4B 1G7
Manitoba
Edge Electrical Marketing Inc. www.munden.ca
1432 Erin Street Tel: (902) 405-8545
Winnipeg, MB R3E 2S8
www.edgeelec.ca
Tel: (204) 774-0268
dWK91088B - 102017