Superior Products,: Catalog #18

Superior
Products, LLC
CATALOG #18
Brass & Stainless Steel

Gas Fittings & Assemblies
gid Pigtails
Flexible & Rigid Pigtails
Manifolds & Gas Management Systems
Industrial Hospital Specialty Engineering
www.superiorprod.com
table of contents
general information/ordering information .......................................................................................................1-5

table of contents ............................................................................................................................................... 3
,QGXVWULDOJDV¿WWLQJV ................................................................................................................................6-54
Brass Fittings/Regulator Outlets
Cylinder Connections
Pigtails ......................................................................................................................................................56-63
Pigtails
Hose Assemblies
0DQLIROGV¿OOSODQW .................................................................................................................................64-72
Manifolds
Changeover Systems
DLUZDWHU¿WWLQJV .................................18, 19 manifold assemblies ............................................. 69-70

brass ‘y’ connectors .................................46 modular headers........................................................ 68
brass hose ferrules, braces... ..................15 outlet adaptors ...................................................... 49-51
EUDVVKRVH¿WWLQJV.................................. 6-9 pigtail assemblies ................................................. 56-63
EULWLVKVW\OH¿WWLQJV ..............................20,21 SLJWDLOFRQ¿JXUDWRU ................................................ 62-63
cga - regulator inlet nuts & nipples .... 24-42 pin indexed yokes ...................................................... 43
check valves ............................................10 SLSH¿WWLQJV .......................................................... 13, 14
coupler tees & manifold blocks ..........44, 45 power cable nipples & connector assemblies.............17
cradle pack manifolds ........................ 66-67 regulator outlets ........................................................... 9
FU\RJHQLFKRVH ¿WWLQJV..........................55 shut-off valves & dust caps.................................. 47, 48
cylinders to regulator adaptors .......... 52-54 yokes ................................................................... 43, 81
ÀDVKDUUHVWRUV TXLFNFRQQHFWRUV ..........11
JHUPDQVW\OH¿WWLQJV........................... 21-22
hose repair kits ........................................16
manifold accessories ......................... 70-72
PROUD MEMBER OF :
2 www.superiorprod.com
table of contents
Adaptor Flash Arrestors Pigtail Assemblies

Argon & Inert Arc ...................................... 18 Pigtail ............................................................. 60 Armor Guard ................................................... 60
Cryogenic Flare .......................................... 55 Torch, Regulator ............................................. 11 Brass, Copper........................................... 56, 58
Cylinder to Regulator, CGA ...................52-54 Flexible, Nylon ........................................... 57-58
Hose, Oxygen / Fuel Gas – Hose Repair Kits ...................................... 16 Flexible, Stainless Braided .................. 57-60, 62
A, B, C & D size .........................................7-9 Liquid Cylinder Gas Use ................................. 58
Liquid CGA-622 x 20 .................................. 40 Inert Arc Fittings NFPA Hospital ................................................ 58
Manifold Pipeline Outlet, CGA ...............49-51 Adaptors ......................................................... 18 3LJWDLO&RQ¿JXUDWRU .............................. 59, 62-63
Pipe Thread ..........................................7-9,14 Couplers .................................................... 18-19 Pigtail Ends................................................ 61-63
Nipples............................................................ 19 Rigid, Stainless Steel...................................... 56
Braces Nuts ........................................................... 18-19 Spring Guard .................................................. 60
Hose ........................................................... 15 Power Cable ................................................... 17
Pipe Thread Fittings
British Fittings..................................20-21 Leak Detector............................................. 15 Brass & Stainless Steel ............................. 13-14
Bushings Manifolds Plugs

Manifold Union Bushings ............................ 71 Semi-Automatic Changeover.......................... 64 Manifold, Union .............................................. 71
Outlet, Regulator - A, B, C & D size.............. 9 Blocks ............................................................. 45 Pipe Thread ................................................... 14
3LSHWKUHDG¿WWLQJV ......... 14 Fittings ....................................................... 70-71 Plugs, CGA .................................................... 48
Headers, Cradle Pack ............................... 66-67 Plug & Chain, CGA ......................................... 48
Cable Connectors Headers, Extension ........................................ 69
Nipples........................................................ 17 Headers, Modular ........................................... 68 Quick Connectors
Manual ....................................................... 69-70 Regulator & Torch ............................................11
Caps Mixers ............................................................. 65
Dust Cap & Chain - CGA & Hose ............... 47 Pipe Lengths................................................... 71 Repair Kits
Hose ............................................................... 16
Check Valves Mixers............................................................ 65 Crimping Tools ................................................ 16
Inline ........................................................... 10
Nipple Type............................................24-42 Nipples Splicers
Tee, CGA ...............................................44-45 Handtight (HT) ........................................... 24-42 Hose ................................................................. 6
Torch, Regulator ......................................... 10 Hose, Inert Gas .............................................. 19
Hose, Oxygen/Fuel Gas A, B, C, D .................. 6 Station Drops & Valves.......................... 72
Couplers Regulator Inlet, CGA -
Hose - A,B,C,D size ...................................... 9 Brass, Stainless & Chrome........................ 24-42 Tees
Hose - Argon & Inert Arc ........................18-19 RPV Style .................................................. 27-38 Manifold, CGA
Tees for Manifold, CGA..........................44-45 Union Nipples - Manifold ................................ 71 - Brass, Stainless, Chrome.. ..................... 44-45
Manifold, Brass .............................................. 71 Manifold, Pipe ................................................. 71
Cradle Pack Manifolds Pipe Thread - Brass & Stainless..................... 13
CPR, Long Style.................................. ....... 67 Nuts
SCMB, Short Style...................................... 64 Handtight (HT) ........................................... 24-42 Tools
Hose-Argon & Inert Gas ............................ 18-19 Ferrule Crimping, Hand .................................. 16
Cryogenic Hose-Oxygen & Fuel Gas -
Fittings ........................................................ 55 A, B, C & D size .............................................. 6 Tubing
Hose ........................................................... 55 Regulator CGA Brass, Copper and Stainless .......................... 56
- Brass, Stainless, Chrome ....................... 24-42
DIN Fittings (German) Union Nut, Manifold ........................................ 71 Valves
Nuts & Nipples............................... ........21-22 Ball.................................................................. 72
Pigtail Assemblies Brass Seat, Shut-Off....................................... 47
Ferrules Armor Guard ................................................... 60 Header ............................................................ 72
Hose ........................................................... 15 Brass, Copper............................................ 56,58 Master Shut-Off .............................................. 72
Flexible, Nylon ........................................... 57-58 Station Drop.................................................... 72
Fill Plant Flexible, Stainless Braided .................. 57-60, 60 “Y” with Valves ................................................ 46
Yokes .......................................................... 43 Liquid Cylinder Gas Use ................................. 58
NFPA Hospital ................................................ 58 “Y” Connectors......................................... 46
Filters 3LJWDLO&RQ¿JXUDWRU .............................. 59, 62-63
Regulator Inlet Nipple ................................. 23 Pigtail Ends................................................ 60-63 Yokes ............................................................. 43
Rigid, Stainless Steel...................................... 56
Flash Arrestor, Dry .............................. 64 Spring Guard .................................................. 60 Zero Clearance Fittings ......................... 64
Call for more information or to place an order ZZZVXSHULRUSURGFRP 3

product description guide
Superior Products, LLC. has made every effort to publish the most helpful and SDUWW\SH OHWWHUSUHÀ[
comprehensive catalog of compressed gas products available. With safety and accurate
SURGXFWVSHFL¿FDWLRQDVWRSSULRULWLHVRXUSURGXFWGHVFULSWLRQVLQFOXGHLQIRUPDWLRQRQ
sizes, operating pressures, application, construction materials, CGA numbers, and all Adaptors - Outlet A
other relevant information. Bushings - Pipe B
Brass Tubing BT
CGA numbersLGHQWLI\SURGXFWVLQWHQGHGIRUVSHFL¿FJDVVHUYLFHV$OO6XSHULRU¿WWLQJV
Cable Connectors CN
are manufactured to Compressed Gas Association standards.
Check Valves CV
,Q DGGLWLRQ WR &*$ QXPEHUV PDQ\ SRSXODU ¿WWLQJV DUH FRPPRQO\ UHIHUUHG WR DV Couplers - Tees C
“A”, “B”, “C”, and “D” VL]HG¿WWLQJV)RU\RXUFRQYHQLHQFHWKHVHOHWWHULGHQWL¿FDWLRQV Copper Tubing CT
are also included in our product descriptions as “A”, “B”, “C”, and “D”. Pressure
ratingsRQ$%&DQG'VL]HG¿WWLQJVLQFOXGHGRQWKHVHSDJHVDUHOLPLWHGE\WKH&*$ Crimping Tools KT
to 200 PSI (1400 kPa) maximum working pressure. Kilopascals (kPa) are the metric Dust Caps & Chain CC
HTXLYDOHQWRI3RXQGV3HU6TXDUH,QFK36, Elbow EL
Cryogenic Elbow CEL
gas acronyms used Cryogenic Flexible Hose CHF
(not all standard) Cryo Hand Tight with Elbow CHTE
CGA Compressed Gas Association RH Right Handed Cryogenic Phase Separator CPS
NGO National Gas Outlet LH Left Handed Check Valves CV
NPT National Pipe Thread WT Wrench Tight
Filters F
UNS 8QL¿HG1XPEHULQJ6\VWHP HT Hand Tight
Flare Adaptors FA
PSI 3RXQGVSHU6TXDUH,QFK QC Quick Connect
Flash Back Arrestor FA
EXT External (M - Male Thread) CP Chrome Plated
ID Inside Diameter Gas Manifold Assemblies GMA
INT Internal (F - Female Thread)
OD Outside Diameter Gas Manifold Fittings GMF
CS Countersunk
Hand Tight Cyrogenic HTC
Hand Tight Nuts HTN
metric conversion PSI to kPa to Bar Hose Repair Kits RK
The following conversions are used throughout this catalog, rounded off for ease Manifold Blocks MB
of use. Kilopascals & Bar conversions are provided whenever possible.(1 PSI = Chrome Nuts MN
6.89 kPa = .07 Bar Chrome Nipples MNP
200 PSI = 1379 kPa = 14 Bar 3000 PSI = 20685 kPa = 207 Bar Leak Detector LD
400 PSI = 2758 kPa = 28 Bar 4500 PSI = 27580 kPa = 310 Bar Nipples NP
500 PSI = 3400 kPa = 35 Bar 5500 PSI = 37920 kPa = 380 Bar Nuts N
1000 PSI = 6895 kPa = 70 Bar 6000 PSI = 41370 kPa = 414 Bar
NPT Male MNPT
NPT Female FNPT
‘O’ Rings OR
PD[LPXPJDVZLWKGUDZDOUDWHVIRUOLTXLÀHGJDVHV Pigtails Rigid PT
Pigtails Flexible PTF
CRYOGENIC CYLINDERS Plastic Tips T
Plugs & Chains PC
CO2 - 110 SCFH
Power Cable Holders PCH
NITROUS OXIDE - 80 SCFH Reverse Flow Check Valve RCV
ARGON, NITROGEN, OXYGEN - 75 SCFH
Splicers S
Stainless Steel SS
Snap Rings XSR
HIGH PRESSURE W/LIMITED WITHDRAWAL RATE Valves V
CO2 50 - SCFH Washers W
“Y” Connectors Y
NITROUS OXIDE - 50 SCFH
“Y”’ Connectors with Valves YV
Acetylene - 1/10 CYL CAPACITY/HOUR
new products
NEW FROM SUPERIOR PRODUCTS FEATURED IN THIS CATALOG !
NEW PRODUCTS PAGE #
Hose Repair Kits w/o Tools 16
Three Hole Vise Grip Tools 16
DIN Fittings 21, 22
Stainless Steel Check Valve Nipples 27-40
RPV Valve Nipples 27-39
CGA 622 & 624 Nut & Nipple 40
CGA 622 & 624 Valve Outlet Adaptors 51
CGA 320-580 One Piece Adaptor 52
CGA 622-320 Adaptor 40
3600 PSI Post Sintered PTFE Hose 61
1/4” FNPT Swivel end Pigtails 60
One Piece Modular Brass Headers 68
90o Manifold Header Union 71
CGA TABLE OF CONTENTS BY GAS & CGA #

CGA # PAGE # CGA # PAGE # CGA # PAGE #
British 20, 21 CGA 347 Air (3001- 5500 psi) 30 CGA 621 Oil Tolerant Nitrogen 39
DIN 21, 22 CGA 350 Hydrogen 31 &*$&2/LT:LWKGUDZDO 40
CGA 170 Small Bottle 24 CGA 410 Canadian Acetylene 32 &*$12/LT:LWKGUDZDO 40
CGA 180 Small Bottle 24 CGA 415 Canadian Acetylene 32 CGA 660 Refrigerant Gases 40
CGA 200 Acetylene “MC” 24 CGA 500 Medical Mixtures 33 CGA 677 Inerts (5501-7500 psi) 41
CGA 280 Med. Breathing Mix 25 CGA 510 Propane/Acetylene 34 CGA 680 Inerts (3001-5500 psi) 41
CGA 296 Industrial O2 Mix 25 CGA 520 Acetylene 35 CGA 695 Hydrogen/Methane 42
CGA 300 Acetylene 26 CGA 540 Oxygen 36 CGA 701 Oxygen (4001-5500 psi) 42
CGA 320 Carbon Dioxide 27 CGA 555 Propane/Butane 37 CGA 702 Air (5501-7500 psi) 42
CGA 326 Nitrous Oxide 28 CGA 577 Oxygen (3001-4000 psi) 37
&*$/LTXL¿HG&RUURVLYHV29 CGA 580 Inert Gases 38
CGA 346 Air (up to 3000psi) 29, 30 &*$6XOIXU+H[DÀRXULGH 39

brass hose nuts, nipples & splicers
Maximum Pressure 200 PSI

Hose Nuts 200 PSI Hose Nuts 200 PSI
Oxygen Thread Size CGA Part No. Fuel Gas Thread Size CGA Part No.
“A” 3/8”-24-RH 020 N-10 “A” 3/8”-24-LH 021 N-11
“B” 9/16”-18-RH 022 N-20 “B” 9/16”-18-LH 023 N-21
Railroad 41/64”-18-RH 028 N-30 Railroad 41/64”-18-LH 029 N-31
“C” 7/8”-14-RH 024 N-34 “C” 7/8”-14-LH 025 N-35
“D” 1-1/4”-12-RH 026 N-42 “D” 1-1/4”-12-LH 027 N-43
N-20 N-21
Barb Hose Nipples 200 PSI Spiral Hose Nipples 200 PSI
NP-10 NP-46
Size/Length For Hose Size Part No. Size/Length For Hose Size Part No.
“A”, 1-7/32” 3/16” I.D. NP-4 “A”, 1-1/4” 3/16” I.D. NP-40
“B”, 3-1/32” 4-5/32” I.D. NP-5 “B”, 1-5/16” 3/16” I.D. NP-42
“B”, 1-7/16” 3/16” I.D. NP-6 “B”, 1-19/32” 1/4” I.D. NP-46
“B”, 1-7/16”(with ‘O’Ring) 3/16” I.D. NP-6W “B”, 1-5/8” 3/8” I.D. NP-54
“B”, 1-7/16” 1/4” I.D. NP-10
Nipples With Threads-
“B”, 1-7/16”(with ‘O’Ring) 1/4” I.D. NP-10W
”B”, ”C” & ”D” Size
“C”, 1-35/64” 1/4” I.D. NP-12
“B”, 1-7/16” 5/16” I.D. NP-14
“B”, 1-7/16” 3/8” I.D. NP-18
“B”, 1-3/4” 3/8” I.D. NP-20
NP-605
“C”, 2” 3/8” I.D. NP-24
“C”, 2-1/4” 1/2” I.D. NP-28 Size/Length Thread size Part No.
“C”, 4-9/16” 1/2” I.D. NP-30
“B”, 1” 1/8” MNPT NP-595
“D”, 2-1/2” 1/2” I.D. NP-34
“B”, 1-1/2” 1/8” MNPT NP-596
“D”, 3-1/2” 3/4” I.D. NP-36
“C”, 2” 1/4” MNPT NP-605*
‘O’Ring for NP-6W & NP-10W XOR-002
“C”, 2-1/2” 1/4” MNPT NP-606*
“D”, 2-1/2” 1/2” MNPT NP-640
7RRUGHUZLWK¿OWHUDGGVXI¿[³5)´
Hose Splicers 200 PSI 200 PSI
For Hose Size Part No. For Hose Size Part No.
Barb Hexagon Center Stop Spiral Hexagon Center Stop
3/16” I.D. S-233
1/4” I.D. S-244
5/16” I.D. S-255 1/4” I.D. S-544
3/8” I.D. S-266
S-244
S-544
Barb Round Center Stop 3/16” I.D. S-333

Barb No Center Stop
1/4” I.D. S-344 3/16” I.D. S-433
5/16”I.D. S-355 1/4” I.D. S-444
3/8” I.D. S-366 3/8” I.D. S-466
S-344 1/2” I.D. S-388 S-444
EUDVVKRVHÀWWLQJV

Brass Thread To Hose Barb Adaptor 200 PSI
Thread Size For Hose Size Part No.
Male NPT Thread 1/8” MNPT 1/8” I.D. A-101
1/8” MNPT 3/16” I.D. A-102
1/8” MNPT 1/4” I.D. A-103
1/8” MNPT 3/8” I.D. A-105
1/4” MNPT 1/8” I.D. A-111
1/4” MNPT 3/16” I.D. A-112
1/4” MNPT 1/4” I.D. A-113
1/4” MNPT 5/16” I.D. A-114
A-113 1/4” MNPT 3/8” I.D. A-115
3/8” MNPT 1/4” I.D. A-122
3/8” MNPT 5/16” I.D. A-123
3/8” MNPT 3/8” I.D. A-124
Female NPT Thread Thread 1/8” FNPT 1/8” I.D. A-151

1/8” FNPT 3/16” I.D. A-152
1/8” FNPT 1/4” I.D. A-153
1/4” FNPT 1/8” I.D. A-161
1/4” FNPT 3/16” I.D. A-162
1/4” FNPT 1/4” I.D. A-163
1/4” FNPT 5/16” I.D. A-164
A-151 1/4” FNPT 3/8” I.D. A-165
Hose Barb Adaptors 200 PSI

(Standard B Thread)
Oxygen“B” 9/16”-18-RH-EXT 3/16” I.D. A-50

Fuel Gas“B” 9/16”-18-LH-EXT 3/16” I.D. A-51
Oxygen“B” 9/16”-18-RH-EXT 1/4” I.D. A-60
A-51 Fuel Gas “B” 9/16”-18-LH-EXT 1/4” I.D. A-61
Hose Adaptors 200 PSI

Swivel Nut to Hose Barb Adaptors
Oxygen “A” 3/8”-24-RH-INT 1/4” I.D. Hose A-250
Fuel Gas “A” 3/8”-24 LH-INT 1/4” I.D. Hose A-251
Oxygen “B” 9/16”-18 -RH-INT 1/4” I.D. Hose A-254
A-254 Fuel Gas “B” 9/16”-18 -LH-INT 1/4” I.D. Hose A-255
Swivel Nut Adaptors 200 PSI

Thread Size Hose Connection Part No.
1/4” MNPT “B” 9/16”-18-RH-INT A-192
1/4” MNPT “B” 9/16”-18-LH-INT A-193
A-193 A-192

EUDVVKRVHÀWWLQJV
External Hose Nut to Swivel Nut Pipe Thread to Swivel Nut

and Nipple 200 PSI and Nipple 2-1/2” 200 PSI
A-300
A-307
A-188
Oxygen Oxygen
Thread Size Thread Size Part No. Thread Size Thread Size Part No.
“A” 3/8”-24-RH-EXT “B” 9/16”-18-RH-INT A-300 1/4” MNPT “B” 9/16”-18-RH-INT A-188
“B” 9/16”-18-RH-EXT “A” 3/8”-24-RH-INT A-306
“B” 9/16”-18-RH-EXT “C” 7/8”-14-RH-INT A-308
Fuel Gas Fuel Gas

“A” 3/8”-24-LH-EXT “B” 9/16”-18-LH-INT A-301 1/4” MNPT “B” 9/16”-18-LH-INT A-189
“B” 9/16”-18-LH-EXT “A” 3/8”-24-LH-INT A-307
Female Pipe Thread Female NPT

to “B” Connections 200 PSI to Internal Swivel Nut 200 PSI
FNPT EXT Hose

“B” Coupler
FNPT INT Hose “B”

A-238
Swivel Nut
Oxygen
Thread Size Thread Size Part No.
A-228
Oxygen
1/8” FNPT “B” 9/16”-18-RH-EXT A-238
1/4” FNPT “B” 9/16”-18-RH-EXT A-242
1/4” FNPT “B” 9/16”-18-RH-INT A-228
Fuel Gas
Fuel Gas
1/4” FNPT “B” 9/16”-18-LH-EXT A-243
1/4” FNPT “B” 9/16”-18-LH-INT A-229
EUDVVVWDLQOHVVVWHHOKRVHÀWWLQJVUHJXODWRURXWOHWV
90° External Hose Coupler to 90° External Pipe to External

Internal Swivel Nut 200 PSI “B” coupler 200 PSI
Standard B Standard B
Oxygen Nut Oxygen Hose
Coupler
Standard B
Oxygen Hose
Coupler MNPT
A-322 A-334
Oxygen Oxygen
“B” 9/16”-18-RH-EXT “B” 9/16”-18-RH-INT A-322 1/4” MNPT “B” 9/16”-18-RH-EXT A-334
1/4” MNPT “B” 9/16”-18-RH-INT A-194
Fuel Gas Fuel Gas

“B” 9/16”-18-LH-EXT “B” 9/16”-18-LH-INT A-323 1/4” MNPT “B” 9/16”-18-LH-EXT A-335
Hose Couplers (Brass) 200 PSI Regulator Outlet Adaptors 200 PSI
C-50
B-28 B-28SS
Oxygen Oxygen
“A” 3/8”-24-RH-EXT “A” 3/8”-24-RH-EXT C-10 1/8” MNPT “A” 3/8”-24-RH-EXT B-6
“B” 9/16”-18-RH-EXT “A” 3/8”-24-RH-EXT C-20 1/8” MNPT “B” 9/16”-18-RH-EXT B-8
“B” 9/16”-18-RH-EXT “B” 9/16”-18-RH-EXT C-50 1/4” MNPT “A” 3/8”-24-RH-EXT B-26
“C” 7/8”-14-RH-EXT “C” 7/8”-14-RH-EXT C-80 1/4” MNPT “B” 9/16”-18-RH-EXT B-28
“D” 1-1/4” - 12-RH-EXT “D” 1-1/4” - 12-RH-EXT C-90 1/4” MNPT “B” 9/16”-18-RH-EXT B-28SS
3/8” MNPT “B” 9/16”-18-RH-EXT B-50
Fuel Gas 1/2” MNPT “C” 7/8”-14-RH-EXT B-66
1/2” MNPT “D” 1-1/4” - 12-RH-EXT B-72
3/4” MNPT “D” 1-1/4” - 12-RH-EXT B-74
“A” 3/8”-24LH-EXT “A” 3/8”-24-LH-EXT C-11
Fuel Gas
“B” 9/16”-18LH-EXT “A” 3/8”-24-LH-EXT C-21
“B” 9/16”-18LH-EXT “B” 9/16”-18-LH-EXT C-51 Thread Size Thread Size Part No.
“C” 7/8”-14-LH-EXT “C” 7/8”-14-LH-EXT C-81
1/8” MNPT “A” 3/8”-24-LH-EXT B-7
“D” 1-1/4” - 12-LH-EXT “D” 1-1/4” - 12-LH-EXT C-91
1/8” MNPT “B” 9/16”-18-LH-EXT B-9
1/4” MNPT “A” 3/8”-24-LH-EXT B-27
1/4” MNPT “B” 9/16”-18-LH-EXT B-29
3/8” MNPT “B” 9/16”-18-LH-EXT B-51
1/2” MNPT “C” 7/8”-14-LH-EXT B-67

check valves
Check Valves
Torch Type Check Valve Inlet Flow Outlet Part No.

200 PSI
Oxygen “A” 3/8”-24-RH-EXT > “A” 3/8”-24-RH-INT CV-10R
Fuel Gas “A” 3/8”-24-LH-EXT > “A” 3/8”-24-LH-INT CV-11L

CV-10R
B-Size One Piece Torch Type 200 PSI

Oxygen “B” 9/16”-18-RH-EXT > “B” 9/16”-18-RH-INT CV-20R
Fuel “B” 9/16”-18-LH-EXT > “B” 9/16”-18-LH-INT CV-21L

CV-20R
200 PSI
Regulator Bushing Adaptor Type
Oxygen “B” 9/16”-RH-INT > “B” 9/16”-18-RH-EXT CV-128R
Fuel Gas“B” 9/16”-LH-INT > “B” 9/16”-18-LH-EXT CV-129L
1/4” MNPT > “B” 9/16”-18-RH-EXT CV-28R

CV-128R
1/4” MNPT > “B” 9/16”-18-LH-INT CV-29L
Low Pressure Inline Check Valves 200 PSI
1/4” MNPT > 1/4” MNPT CV-24
1/4” MNPT > 1/4” FNPT CV-25
CV-25
1/4” FNPT > 1/4” FNPT CV-26
High Pressure Inline Check Valves 3000 PSI

1/4” MNPT > 1/4” MNPT CV-215
1/4” MNPT > 1/4” FNPT CV-219
1/4” FNPT > 1/4” FNPT CV-229

CV-230
1/4” FNPT > 1/4” MNPT CV-230
Stainless Steel Inline Check Valves 6000 PSI
1/4” MNPT > 1/4” MNPT CV-215SS
1/4” MNPT > 1/4” FNPT CV-219SS
1/4” FNPT > 1/4” FNPT CV-229SS

CV-219SS
1/4” FNPT > 1/4” MNPT CV-230SS
ÁDVKDUUHVWRUV TXLFNFRQQHFWRUV
ÀDVKDUUHVWRUV
'HVLJQHGIRU³%´WRUFK KRVH¿WWLQJV
%XLOWLQFKHFNYDOYHSUHYHQWVUHYHUVHÀRZRIJDV
%URQ]HVLQWHUHGHOHPHQWVWRSVPXOWLSOHÀDVKHV
QRUHVHWWLQJUHTXLUHG
8//LVWHG
3XUFKDVHDV323GLVSOD\SDFNRUDVLQGLYLGXDOFRPSRQHQWV
+LJK)ORZ&DSDFLW\
36,LVPLQLPXPSUHVVXUHIRUJDVWRÀRZ
*Always leak test system before pressurizing

*Always bleed the system before disconnecting
200 PSI
Description Part No.
Oxygen/Fuel Gas Set, Regulator Style, POP Display FBK-100
Oxygen/Fuel Gas Set, Torch Style, POP Display FBK-200
Individual Oxygen Arrestor, Regulator Style FB-122
Individual Fuel Gas Arrestor, Regulator Style FB-123
Individual Oxygen Arrestor, Torch Style FB-222
Individual Fuel Gas Arrestor, Torch Style FB-223
TXLFNFRQQHFWRUV
'XUDEOHEUDVVFRXSOLQJSLQ
'HVLJQHGIRU³%´WRUFKDQGKRVH¿WWLQJV
'HVLJQJXLGHGE\,62VDIHW\VWDQGDUGV
1RQLQWHUFKDQJHDEOHR[\JHQIXHOJDVFRQQHFWRUVSUHYHQWFURVVFRQQHFWLRQV
%XLOWLQDXWRPDWLFJDVFXWRIIVVKXWGRZQXSVWUHDPJDVHVZKHQGLVFRQQHFWHG
*Always leak test system before pressurizing
*Always bleed the system before disconnecting
Oxygen: 200 PSI Max Fuel Gas: 50 PSI Max

Oxygen & Fuel Gas Set, Torch Style, POP Display QCT-100
Oxygen Set, Torch Style QCT-112
Fuel Gas Set, Torch Style QCT-113
Oxygen & Fuel Gas Set, Regulator Style, POP Display QCR-200
Oxygen Set, Regulator Style QCR-222
Fuel Gas Set, Regulator Style QCR-223
Oxygen & Fuel Gas Set, Hose Style, POP Display QCH-300
Oxygen Set, Hose Style QCH-332
Fuel Gas Set, Hose Style QCH-333
Replacement Pins for Above Parts: Part No.
Male Pin, Oxygen, Torch Style, 9/16-18 RH-INT QCT-112-PIN
Male Pin, Fuel Gas, Torch Style, 9/16-18 LH-INT QCT-113-PIN
Male Pin, Oxygen, Regulator Style, 9/16-18 RH-INT QCT-222-PIN
Male Pin, Fuel Gas, Regulator Style, 9/16-18 LH-INT QCT-223-PIN
Male Pin, Oxygen, Hose Style, 9/16-18 RH-EXT QCH-332-PIN
Male Pin, Fuel Gas, Hose Style, 9/16-18 LH-EXT QCH-333-PIN

engineering, manufacturing, and logistics
Superior Products is dedicated to providing solutions for all parts of your business: from the
innovative product lines we manufacture, to the new technology we offer as a business solutions
partner.
2XUVWDUWWR¿QLVKVROXWLRQVLQFOXGH ENGINEERING EXCELLENCE
design and engineering, manufacturing, reliable Superior Products realizes that not all standard
customer service and logistical support. parts work for all applications. We can
PDQXIDFWXUHSDUWVWR\RXUVSHFL¿FDWLRQVRUKHOS
you design a part to meet your application.
MADE TO ORDER (MTO)
Superior Products designs custom gas
Superior Products offers a Made To Order (MTO) management systems, engineered to:
3URJUDPIRUVSHFLDOW\JDV¿WWLQJV$GHGLFDWHG ,PSURYHHI¿FLHQF\
manufacturing cell can machine and deliver Work within challenging space constraints
parts with a reduced lead time - typically within Manage gas usage
two weeks. The MTO program is perfect for Provide the most effective layout
managing inventories of low-demand parts, Better meet the application’s overall needs
prototyping parts, and running small volumes of
custom parts.
,I\RXGRQRWVHHZKDW\RXQHHGLQWKLVFDWDORJMXVWFDOODQG
OHWXVKHOS\RXGHVLJQZKDW\RXQHHG
LOGISTICS
Superior Products offers a number of logistics
solutions for order and inventory needs.
Superior Products can inventory parts and
drop ship/blind drop ship for you.
)RUDTXRWHRUPRUHLQIRUPDWLRQSOHDVHFRQWDFWRXU A Kanban system can be implemented to
&XVWRPHU&DUHGHSDUWPHQWDW ensure you
y have the necessary parts on
hand.
SUPPLY CHAIN MANAGEMENT
Our online Customer Managements System
allows you to easily manage your supply chain
with around the clock access to:
Part pricing and availability
Shipment tracking QUALITY
Procurement planning Beyond our ISO 9001:2000 registration, all of
Inventory management our employees and S.P. teams they support
Quotes have committed themselves to delivering the
Orders KLJKHVWTXDOLW\SURGXFWVLQWKHFRPSUHVVHGJDV
Invoices industry. Our Superior Products Quality Teams
ality Tea
ams
3DUWVSHFL¿FDWLRQV
DUHFRPPLWWHGWRTXDOLW\,ILWKDVWKH

Quality Control
logo on it you can be assured it is the best.
Account information
9LVLWFPVVXSHULRUSURGFRPWRVLJQXSRUOHDUQPRUH
EUDVVVWDLQOHVVVWHHOSLSHWKUHDGÀWWLQJV
Brass: Maximum Pressure 3,000 PSI
Brass/Stainless Steel Pipe Thread Fittings Stainless Steel (SS): Maximum Pressure 6,000 PSI
90° Elbow Thread Size Material Part No.
1/8” FNPT x 1/8” FNPT Brass PEL-2HP

1/4” FNPT x 1/4” FNPT SS PEL-4SS
PEL-4HP PEL-4SS
1/8” FNPT x 1/8” MNPT Brass PL-2HP

90° Street Elbow 1/4” FNPT x 1/4” MNPT Brass PL-4HP
1/4” FNPT x 1/4” MNPT SS PL-4SS
PL-4HP PL-4SS
45° Street Elbow 1/8” FNPT x 1/8” MNPT Brass PSL-2-2HP

1/4” FNPT x 1/4” MNPT Brass PSL-4-4HP
1/4” FNPT x 1/4” MNPT SS PSL-4SS
PSL-4-4HP PSL-4SS
Cap 1/8” FNPT Brass P-52

1/4” FNPT Brass P-54
P-54
Tee 1/8” FNPT (3) Brass PFT-2HP

1/4” FNPT (3) Brass PFT-4HP
1/2” FNPT (3) Brass PFT-8HP
1/4” FNPT (3) SS PFT-4SS
PFT-4HP PFT-4SS
Street Tee
1/8” FNPT (2) x 1/8” MNPT Brass PST-2HP
1/4” FNPT (2) x 1/4” MNPT Brass PST-4HP
PST-4HP
Cross
1/8” FNPT (4) Brass PCR-2HP

1/4” FNPT (4) Brass PCR-4HP
1/4” FNPT (4) SS PCR-4SS
PCR-4HP PCR-4SS
PCR 4SS

EUDVVVWDLQOHVVVWHHOSLSHWKUHDGÀWWLQJV
Brass: Maximum Pressure 3,000 PSI
Brass/Stainless Steel Pipe Thread Fittings Stainless Steel (SS): Maximum Pressure 6,000 PSI
Hex Brass Nipples Thread Size Material Part No.

1/8” MNPT x 1/8” MNPT Brass B-200
1/4” MNPT x 1/4” MNPT SS B-215SS
B-241 B-215SS 1/2” MNPT x 1/4” MNPT Brass B-241
Hex Head Plug 1/8” MNPT Brass P-2

1/4” MNPT Brass P-4
1/2” MNPT Brass P-8
P-4
1/4” FNPT x 1/4” MNPT Brass B-219

Adaptors
Ad
da 1/4” FNPT x 1/4” MNPT SS B-219SS
B-219 B-219SS
Connectors 1/8” FNPT x 1/8” FNPT Brass B-201

1/4” FNPT x 1/8” FNPT Brass B-207
1/4” FNPT x 1/4” FNPT SS B-218SS
B-218 B-218SS
Reducer Bushing
g 1/4” MNPT x 1/8” FNPT Brass B-280
3/8” MNPT x 1/4” FNPT Brass B-282
B-284 1/2” MNPT x 3/8” FNPT Brass B-285
1/8” MNPT, 1.5” Long Brass PNP-2-15

Round Brass Nipples
PNP-4-25 1/4” MNPT, 3.0” Long Brass PNP-4-30
Pipe
p Extension
1/8” FNPT x1/8” MNPT, 2.5” Long Brass B-395
1/4” FNPT x 1/4”MNPT, 3.0” Long Brass B-430
B-430
brass hose ferrules, braces & clamps
Round Brass Hose Ferrules Oval Brass Dual Hose Braces Maximum Pressure 200 PSI
Standard Package: 25
Dimension(INT) Length Metal Gauge Part No.
Diameter(INT) Length Part No.
.448 x .890 15/32” .019” 9116
.330” 1/2” 6231 .474 x .943 15/32” .019” 9979
.358” 1/2” 833 .535 x 1.071 3/4” .024” 9940P
.380” 1/2” 622 .593 x 1.109 3/4” .024” 9593
.410” 1/2” 620 .593 x 1.238 3/4” .025” 453
.450” 9/16” 769 .700 x 1.325 3/4” .025” 454
.478” 11/16” 4750
.500” 1/2” 624
.500” 1” 7322
.525” 1” 7323
.525” 1/2” 625
.531” 1” 7324 Gas Leak Detector, Oxygen Safe
.548” 31/64” 626
.562” 1” 7325
.564” 3/4” 3588 8 oz. Reusable Plastic Applicators LD-008
.575” 31/64” KK
.593” 1” 7326 *DOORQ&RQWDLQHUIRU5H¿OOLQJ$SSOLFDWRUV LD-128
.600” 1/2” JJ
.625” 1/2” II
.625” 1” 7327
.650” 1/2” HH
.656” 1” 7328
.675” 33/64” GG
.687” 1” 7329
.700” 33/64” FF
.718” 1” 7330
.725” 17/32” EE
.750” 17/32” DD
.750” 1” 7331
.781” 1” 7332
.812” 1” 7333
.850” 9/16” Z
.875” 27/32” 7244A
.900” 27/32” 5029A
.937” 27/32” 7242A
.975” 27/32” 5028A
NOTE: Hose diameters may vary, check for proper
inside diameter of the ferrules.

hose repair kits
REPAIR KITS:
Hose Connections, Crimping Tools & Pipe Fittings
RK-26 RK-27

6XSHULRUKRVHUHSDLUNLWVLQFOXGH¿WWLQJVQXWV QLSSOHVVSOLFHUVFRXSOHUVDQGIHUUXOHVIRUWKHVWDWHGKRVH,'DQGWKUHDGVL]H$OVR
LQFOXGHGZLWKWKHNLWVDUHDRUKROHYLVHJULSFULPSLQJWRROIRUIDVWHDV\DQGUHOLDEOHFULPSLQJRIWKHKRVH¿WWLQJV$OONLWVFRPHLQD
VHFWLRQHGSODVWLFFDVHZLWKLQVWUXFWLRQVDQG¿WWLQJGHVFULSWLRQFKDUWVNEW $OONLWVDUHDYDLODEOHZLWKRXWWKHFULPSLQJWRRODQGMXVWWKH¿WWLQJV
that you need if you already have a crimper. To order the kit you want without a crimping tool, add LT to the back of the kit part number. For
H[DPSOHWKH5./7ZLOOJHW\RXMXVWWKHUHSODFHPHQW¿WWLQJVLQWKHVDPHVHFWLRQHGER[
³%´KRVH¿WWLQJVZLWK.7&ULPSLQJ7RRO&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´DQG´,'KRVH RK-24
³%´KRVH¿WWLQJV¿WWLQJVRQO\QLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´DQG´,'KRVH RK-24LT
³$´DQG³%´KRVH¿WWLQJVZLWK.7&ULPSLQJ7RRO&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´DQG´,'KRVH RK-26
³$´DQG³%´KRVH¿WWLQJVRQO\QXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´DQG´,'KRVH RK-26LT
³%´KRVH¿WWLQJVZLWK.7&ULPSLQJ7RRO&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´,'KRVH RK-27
³%´KRVH¿WWLQJVRQO\&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´,'KRVH RK-27LT
³%´KRVH¿WWLQJVZLWK.7&ULPSLQJ7RRO&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´ ´,'KRVH RK-28
³%´KRVH¿WWLQJVRQO\&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´ ´,'KRVH RK-28LT
)HUUXOHVRQO\ZLWK.7&ULPSLQJ7RROIRU´DQG´,'KRVH RK-30
Ferrules only for 1/4” and 3/16” I.D. hose RK-30LT
³%´KRVH¿WWLQJVRQO\&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´DQG´,'KRVH RK-35LT
,QHUWKRVH¿WWLQJVZLWK.7FULPSLQJWRRO&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´,'KRVH RK-50
,QHUWKRVH¿WWLQJVRQO\&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´,'KRVH RK-50LT
Ferrule Crimping Tools, Vice Grip Type

2-Hole Jaws to Crimp KT-28

1/2” wide to crimp 3/16” - 1/4” Hose
KT-28
1/2” wide to crimp 5/8” - 11/16” Hose

KT-29 1/2” wide to crimp 5/16”, 11/32”, 27/64” Hose
Diameters 7/16” and 9/16” on Twin or Single Hose
*No hammer, vise, or other tool needed. Insert hose with ferrule and splicer or nut and
QLSSOHLQSURSHUKROH2IIVHWWRRODSSUR[LPDWHO\´IURPHQGRIIHUUXOHDQGVTXHH]H
KT-30 0DNHWXUQDQGVTXHH]HDJDLQ

Bench top, 5-die, cripmer SCR-100
Die sizes for 5/8”, 37/64”, 17/32”, 31/64”, and 11/16” diameters.
SCR-100
power cable nipples & connector assemblies
Brass Nipple & Copper Tube Assembly Maximum Pressure 200 PSI
“B” Brass Nipple x .225” O.D. Copper Tube, Max.140” Dia. Cable Hole CN-16*
CN-16 “B” Brass Nipple x .322” O.D. Copper Tube, Max.246” Dia. Cable Hole CN-20*
* use with nuts N-2400 or N-2500
“C” Brass Nipple x .263” O.D. Copper Tube & Max.166” Dia. Cable Hole CN-32*
CN-36
CN-28
Power Cable Connector w/ Brass Swivel Nut & Nipple Soldered to Copper Tube for Crimping
“A” Brass Nipple with 3/8”-24 RH-EXT Brass Nut CN-48
x .322” O.D Copper Tube and Max .246” Cable Hole
CN-48
“A” Brass Nipple with 3/8”-24 LH EXT Brass Nut CN-49
x .322” O.D. Copper Tube and Max .246” Cable Hole
“A” Brass Nipple with 3/8”-24 RH EXT Brass Nut CN-54

CN-54 x .322” O.D Copper Tube and Max .246” Cable Hole
.21” Dia. Brass Nipple with 1/4”-28 INT Brass Nut CN-60
CN-60 x .225 O.D. Copper Tube and Max .140” Cable Hole
.37” Dia. Brass Nipple with 7/16”-20 INT Brass Nut CN-68
CN-68 x .375 O.D. Copper Tube and Max .245” Cable Hole
“B” Brass Nipple with 5/8”-18 EXT Brass Nut CN-72

x .468 O.D. Copper Tube and Max .328” Cable Hole
CN-72
Brass Power Cable Nipples (One Piece)

“A” Nipple x .250” O.D. Tube CN-6*
and Max .203” Diameter Cable Hole * use with nuts N-14 or N-15
CN-10 “B” Nipple x .375” O.D. Tube (.420”O.D. Barbs) Hole CN-10*
and Max .312” Diameter Cable * use with nuts N-2400 or N-2500

hose connections for inert arc welders
Air-Water Coupler Maximum Pressure 200 PSI

Thread Size Part No.
5/8”-18-RH-EXT x 5/8”-18-RH-EXT C-130

5/8”-18-RH-EXT x 9/16”-18-RH-EXT C-134
5/8”-18-LH-EXT x 9/16”-18-LH-EXT C-135
C-134
Air-Water Adaptor
1/8” MNPT x 5/8”-18-RH-INT A-402

1/4” MNPT x 5/8”-18-RH-INT A-404
1/4” MNPT x 5/8”-18-LH-INT A-405
A-404 1/4” MNPT x 5/8”-18-RH-EXT A-450
Air-Water Hose Adaptors with Swivel Nuts

1/4” MNPT 5/8”-18-RH- EXT “B” A-414

1/4” MNPT 5/8”-18-LH- EXT “B” A-415
A-478
“B” 5/8”-18-RH-EXT-90 5/8”-18-RH- INT “B” A-424
A-424
“B“ 5/8”-18-RH-EXT x “B” 9/16”-18-RH-EXT A-462
A-462 “B” 5/8”-18-RH-INT x “B” 9/16”-18-RH-INT A-478
“B” 5/8”-18-RH-INT x “B” 9/16”-18-RH-INT (one piece) A-479
Inert Arc Hose Nuts

Use with:
“A” 3/8”-24-RH-EXT NP-66, 67, “A” Cable Connectors N-14
“A” 3/8”-24-LH-EXT NP-66, 67, “A” Cable Connectors N-15
“B” 5/8”-18-RH-EXT NP-69, 70, 72, 73, 74, 76, “B” Cable Connectors N-2400
“B” 5/8”-18-LH-EXT NP-69, 70, 72, 73, 74, 76, “B” Cable Connectors N-2500
“C” 7/8”-14-RH-EXT NP-606, “C” Cable Connectors N-3600
N-2400 “C” 7/8”-14-LH-EXT NP-606, “C” Cable Connectors N-3700
hose connections for inert arc welders
Air-Water Nut Maximum Pressure 200 PSI

Use with:
5/8”-18-RH-INT NP-595, NP-596 N-26
N-26
Inert Arc Barb Hose Nipples

Description For Hose Size Use With Nuts Part No.
“A”-size 1/8” I.D. N-14, N-15 NP-66

“B”-size 1/8” I.D. undersize N-2400, N-2500 NP-68
“B”-size 1/8” I.D. N-2400, N-2500 NP-69
“B”-size 3/16” I.D. N-2400, N-2500 NP-70
NP-73
“B”-size 1/4” I.D. N-2400, N-2500 NP-72
“B” Special 1/4” barb 1/4” I.D. N-2400, N-2500 NP-73
“B”-size 5/16” I.D. N-2400, N-2500 NP-74
“B”-size 3/8” I.D. N-2400, N-2500 NP-76
Inert Arc Hose Couplers Maximum Pressure 200 PSI

3/8”-24-RH-INT “A” 3/8”-24-RH-INT “A” C-118

3/8”-24-LH-INT “A” 3/8”-24-LH-INT “A” C-119
1/4” FNPT 5/8”-18-RH-INT “B” C-124
1/4” FNPT 5/8”-18-LH-INT “B” C-125
5/8”-18-RH INT “B” 5/8”-18-RH INT “B” C-126
5/8”-18-LH INT “B” 5/8”-18-LH INT “B” C-127
C-124
7/8”-14-RH-INT “C” 7/8”-14-RH-INT “C” C-144
7/8”-14-LH-INT “C” 7/8”-14-LH-INT “C” C-145

%ULWLVKVW\OHÀWWLQJV
H.P. Cylinder Connectors

BS-341-3 Oxygen, Inert Gases Maximum Pressure (300 bar) 4350 PSI
Part Description Material Part No.
Hex Nuts
Nut 5/8”A-RH-EXT Brass BN-341-3
Handtight Nuts
Nut-HT 5/8”A-RH-EXT Brass, Plastic Grip BNH-341-3
Nipple-Threaded Inlets
Nipple 1/4” NPT-M, 2.5”Long Brass BNP-341-3-2.5
Nipple-Handtight
Nipple-HT 1/4” NPT-M, 3.5”Long Brass BNP-341-3W-3.5
Replacement Items
“O”Ring For BNP-341-3W-3.5 Nitrile OR-580
Adaptor
Adaptor From CGA 540 (Oxygen) Brass BA-540
Adaptor From CGA 580 (Inerts) Brass BA-580
BS-341-2 Flammables Maximum Pressure (300 bar) 4350 PSI

Hex Nuts
Nut G 5/8 A-LH-EXT Brass BN-341-2
Nipple 1/4” NPT-M, 2.5”Long Brass BNP-341-3-2.5
Nipple-Handtight
Nipple-HT 1/4” NPT-M, 3.5”Long Brass BNP-341-3W-3.5
Replacement Items
“O”Ring For BNP-341-3W-3.5 Nitrile OR-580
Adaptor
Adaptor From CGA 510 Brass BA-510
%ULWLVK*HUPDQVW\OHÀWWLQJV
L.P. Hose Connectors Maximum Pressure 200 PSI

Hex Nuts
Nut 3/8” R.H. Oxygen, Inerts Brass BN-375RH
Nut 3/8” L.H. Fuel Gas, Combustibles Brass BN-375LH
Nipple- Hose Barb
Nipple 1/4” ID Hose, used for 3/8” Nut Brass BNP-375-4

Nipple 5/16” ID Hose, used for 3/8” Nut Brass BNP-375-5
German Style Fittings

DIN-477 Connectors
DIN-6 Inert Gases Maximum Pressure (300 bar) 4350 PSI
Hex Nuts
Nut W 21.80 x 1/14-RH-INT Brass DN-477-06
Nipple 1/4” NPT-M, 3.5”Long Brass DNP-477-6-3.5
Replacement Items
Washer For Nipple Nylon DW-477-6N
DIN-9 Oxygen Maximum Pressure (300 bar) 4350 PSI
Hex Nuts Part Description Material Part No.
Nut R 3/4-RH-INT Brass DN-477-09
Replacement Itemss

*HUPDQVWDQGDUGÀWWLQJV
DIN-10 Nitrogen Maximum Pressure (300 bar) 4350 PSI

Nut W 24.32 x 1/14-RH-INT Brass DN-477-10
Replacement Items
DIN-12 Nitrous Oxide Maximum Pressure (300 bar) 4350 PSI

Nut R 3/4-RH-EXT Brass DN-477-12
Replacement Items
cga nuts and nipples - basic information
Product specification guide and Nipples with check valves Hand tight nuts and nipples
ordering information for regulator
inlet nuts and nipples Nipples with integral check valves are Superior Products hand tight nuts are
designed to provide additional safety available in brass or with plastic grips.
Superior Products offers nuts and nipples in gas management systems and other
LQDYDULHW\RIPDWHULDOVDQGVW\OHVWR¿W HTXLSPHQW $OOQXWVDUHPDFKLQHGWR&*$
DIXOOUDQJHRIJDVVHUYLFHUHTXLUHPHQWV VSHFL¿FDWLRQVDQGGHVLJQHGZLWKZUHQFK
Seven different types of nut/nipple &KHFNYDOYHQLSSOHVFDQEHEXLOWLQWR ÀDWV
combinations are available: pigtails, tee connections and manifold 6RIWWLSRURULQJW\SHQLSSOHVDOZD\V
EORFNVWRUHVLVWEDFNÀRZRIJDVHVIURP should be used with hand tight nuts.
%UDVVQXWDQGQLSSOH OLQHVHTXLSPHQWDQGF\OLQGHUV &*$¿WWLQJVUDWHGRYHU36,GRQRW
6WDLQOHVVVWHHOQXWDQGQLSSOH &KHFNYDOYHVDUHIDFWRU\LQVWDOOHGDQG KDYHVRIWWLSVDQG¿QDOJDVWLJKWVHDWLQJ
%UDVVFKURPHSODWHGQXWDQGQLSSOH are 100% tested. UHTXLUHVDZUHQFKWRWLJKWHQ
1XWDQGQLSSOHZLWKFKHFNYDOYH $YDLODEOHLQEUDVVDQGVWDLQOHVVVWHHO
1XWDQGQLSSOHUHFHVVHGIRUWXELQJ &KHFNYDOYHVDUHIRUUHYHUVHÀRZV
+DQGWLJKWQXWDQGQLSSOH only - they are not to be used as
4XLFNFRQQHFWQXWDQGQLSSOH ÀDVKEDFNDUUHVWRUV
:KHQXVLQJKLJKSUHVVXUHF\OLQGHU
Please note that all types may not be valve connections you should always
available for every CGA. refer to the Compressed Gas
Association V-7 and/or V-7.1 for the
correct method of determining cylinder
valve outlet connection.
ORDERING INFORMATION Add “RF” to end of nipple part numbers listed

INLET NIPPLES FILETERS under the CGA numbers for Installed Filters
Most brass and chrome plated nipples may be ordered in
DQ\RIWKHIROORZLQJWZRFRQ¿JXUDWLRQV ([DPSOH13ZLWK¿OWHUEHFRPHV135)
BRASS AND CHROME PLATED BRASS BRASS AND CHROME PLATED BRASS
NIPPLES WITHOUT FILTERS NIPPLES WITH INSTALLED FILTERS
6LPSO\RUGHUWKHSDUWQXPEHUVDVOLVWHGXQGHUWKH&*$QXPEHUV $GG³5)´WRHQGRIQLSSOHSDUWQXPEHUVOLVWHGXQGHUWKH
3OHDVHQRWHWKDWDOO6XSHULRU3URGXFWVQLSSOHVFRPHVWDQGDUG CGA numbers
ZLWK¿OWHUUHFHVVVRD¿OWHUFDQEHDGGHG 6RPHQLSSOHVUHTXLUH¿OWHUVWREHLQ137HQGRIQLSSOHV
Part No.
FILTERS FOR REGULATOR 3RURXVPHWDO¿OWHUVLQWHUHGEURQ]HQLFNHO
F-7
plated), rated at 35 microns 6000psi
3RURXVPHWDO¿OWHUVLQWHUHGEURQ]HQLFNHO
F-8
plated), rated at 35 microns 6000psi
NIPPLE RETAINING RING C-clip available to hold nut in position and

XSR-020 protect nipple seating area.
CGA check valve nipples are factory Also available with the check
tested and installed in CGA nipples valve reversed. Specify “RCV”.
for additional safety in gas systems,
HWFWRSUHYHQWGDQJHURXVUHYHUVHÀRZ
of gases in lines and other compressed
JDVHTXLSPHQW
NOTE: These check valves protect against
UHYHUVHÀRZRQO\DQGDUHQRWÀDVKEDFN Flow
Part No. NP-210CV Flow
arrestors. Part No. NP-210RCV
$YDLODEOHLQEUDVVDQGVWDLQOHVVVWHHO

inlet nuts & nipples
CGA-170 Non-Corrosive Gases In Small Cylinders 3,000 PSI

Nut .5625”-18UNF-2B-RH-INT Brass N-49
Nut .5625”-18UNF-2B-RH-INT SS N-49SS
Nipple 1/8” NPT, 1.25” Long Brass NP-101
Nipple 1/8” NPT, 1.25” Long SS NP-101SS
Replacement Items
Washer For Nipple PTFE W-60
CGA-180 All Gases In Small Cylinders 3,000 PSI

Nut .625 -18UNF-2B-RH-INT Brass N-50
Nut .625 -18UNF-2B-RH-INT CP Brass MN-050
Nipple 1/8” NPT, 1.75”Long Brass NP-109
Nipple 1/8” NPT, 1.75”Long CP Brass MNP-109
Replacement Items
CGA-200 “MC” acetylene in small cylinders 500 PSI

Hex Nut Part Description Material Part No.
Nut .628”-20NGO-RH-INT Brass N-57
Handtight Nut
Nut-HT .628”-20NGO-RH-INT Brass, Plastic Grip HTN-57P
Nipple-Handtight
g
Nipple-HT 1/8” NPT, 2.5”Long Brass, PTFE NP-418T3
Replacement Item
Replacement Tip For HT Nipple PTFE T418-3
Add “RF” to end of nipple part numbers listed under the CGA numbers for Installed Filters
inlet nuts & nipples
CGA-280 Medical Breathing Mixtures 3,000 PSI

Nut .750” -14NGO-RH-INT Brass N-59
Nut .750” -14NGO-RH-INT CP Brass MN-059
CGA-296 Industrial Oxygen Mixtures 3,000 PSI
Nut .803” -14UNS-2A-RH-EXT Brass N-60

Nut .803” -14UNS-2A-RH-EXT CP Brass MN-060
Handtight Nut
Nut-HT .803” -14UNS-RH-EXT Brass HTN-60
Nipple-Threaded
p Inlets
Nipple 1/4” NPT, 3”Long Brass NP-123
Nipple 1/4” NPT, 3”Long CP Brass MNP-123
Nipple-Handtight
Nipple-HT 1/4” NPT, 3”Long w/O-ring Brass, Nitrile NP-123W
Nipple-Countersunk
Nipple-CS For 5/16” Tube Brass NP-122C3
Nipple-Check Valve
Nipple-CV 1/4” NPT, 3”Long Brass NP-123CV
Replacement Item
O-Ring For HT-Nipple Nitrile OR-296

regulator inlet nuts & nipples
CGA-300 Ethyl Chlorides (R160) Formerly Commercial Acetylene 500 PSI

Nut .830”-14NGO-RH-INT CP Brass MN-056
Handtight Nuts Nut-HT .830”-14NGO-RH-INT Brass HTN-56

Nipple-Threaded Inlets Nipple 1/4” NPT, 2”Long Brass NP-126

Nipple-Handtight
Nipple-HT 1/4” NPT-2.5”Long Brass, PTFE NP-128T3
Nipple-Countersunk Nipple-CS For 1/4” Tube Brass NP-126C2

Nipple-Check Valve
Nipple-CV 1/4” NPT, 2.5”Long Brass NP-128CV
Replacement Items
Soft Tip For HT-Nipple PTFE T128-3
O-Ring For O-Ring Nipple Nitrile MR-116
CGA-320 Carbon Dioxide 3,000 PSI

Nut .830”-14NGO-RH-INT SS N-61SS
Handtight Nuts
Nut-HT .830”-14NGO-RH-INT Brass HTN-61
Nut-HT .830”-14NGO-RH-INT CP Brass, Plastic Grip MHN-061P
Nipple-Threaded Inlets Nipple* 1/4” NPT, 2”Long Brass NP-147

Nipple* 1/4” NPT, 2”Long Brass NP-147SS
Nipple* 1/4” NPT, 2”Long CP Brass MNP-147
Nipple* 1/4” NPT, 2.5”Long Brass NP-150
Nipple* 1/4” NPT, 2.5”Long SS NP-150SS
Nipple* 1/4” NPT, 2.5” Long CP Brass MNP-150
Nipple* 1/4” NPT, 3” Long Brass NP-151
Nipple* 1/4”-NPT, 3” Long CP Brass MNP-151
Nipple* 1/4” NPT, 3.5” Long SS NP-154SS
Nipple* 1/2” 27UNS, 2.5” Long Brass NP-152
Nipple-Handtight Nipple-HT** 1/4” NPT, 2.5” Long Brass NP-150T3

Nipple-HT** For 1/4” Tube Brass NP-147T3C2
Nipple-HT** For 5/16” Tube Brass NP-147T3C3
Nipple-Countersunk
Nipple-CS* For 1/4” Tube Brass NP-147C2
Nipple-CS* For 5/16” Tube Brass NP-147C3
Nipple-CS* For 1/4” Tube SS NP-147C2SS
Nipple-Check Valve Nipple-CV* 1/4”NPT, 2.5” Long Brass NP-150CV

Nipple-CV* 1/4”NPT, 2.5” Long CP Brass MNP-150CV
Nipple-CV* 1/4”NPT, 2.5” Long SS NP-150SSCV
Nipples for use with

Residual Pressure Nipple-RPV* 1/4”NPT, 3” long Brass NP-151-PIN-SS
Valves Nipple-RPV-washer* 1/4”NPT, 3.5” long with Brass NP-154W-RPV
Retractable Pin & Washer
Replacement Items Washer For Nipple Fiber W-6

Washer For HT-Nipples PTFE W-10
Washer For Nipple Nylon MYP-011
Pin For RPV Nipple SS PIN-NP-SS
*Includes Washer **Replace washer with W-10 only

CGA-326 Nitrous Oxide 3,000 PSI

Handtight Nuts Nut-HT .830”-14NGO-RH-INT Brass HTN-82

Nipple 1/4” NPT, 2.5” Long CP Brass MNP-733
Nipple 1/4” NPT, 3” Long Brass NP-734
Nipple-Handtight
Nipple-HT 1/4” NPT, 2.5” Long Brass, PCTFE NP-733T1
Nipple-HT-CS For 1/4” Tube Brass, PCTFE NP-732T1C3
Nipple-Countersunk
Nipple-CS For 1/4” Tube SS NP-732C2SS
Nipple-Check Valve
Nipple-CV 1/4” NPT, 2.5”Long Brass NP-733CV
Nipple-CV 1/4” NPT, 2.5”Long SS NP-733SSCV
Nipple-CV 1/4” NPT, 2.5”Long CP Brass MNP-733CV
Nipples for use with

Nipple-RPV-O-Ring 1/4” NPT, 3.5”Long Brass, EPDM NP-735W-RPV
Residual Pressure
with Retractable Pin & O-Ring
Valves
Replacement Items Soft Tip For HT-Nipple PCTFE T733-1

O-ring For NP-735W-RPV EPDM OR-326
3,000 PSI
CGA-330 Non-Corrosive Gases
Nut .830”-14NGO-LH-INT Brass N-62
Nut .830”-14NGO-LH-INT SS N-62SS
Nut .830”-14NGO-LH-INT CP Brass MN-062
Nipple-Threaded Inlets Nipple* 1/4” NPT, 2” Long Brass NP-161

Nipple* 1/4” NPT, 2” Long SS NP-161SS
Nipple* 1/4” NPT, 2.5” Long Brass NP-162
Nipple-Countersunk
Nipple* For 1/4” Tube SS NP-161C2SS
Replacement Items
Washer For Nipple Fiber W-6
Washer For Nipple ETFE MYP-010
Washer For Nipple Nylon MYP-011
*Includes Washer
CGA-346 Air 3,000 PSI


Handtight Nuts
Nut-HT .830”-14NGO-RH INT Brass HTN-84
Nut-HT .830”-14NGO-RH INT Brass, Plastic Grip HTN-84P
Nut-HT .830”-14NGO-RH INT CP Brass, Plastic Grip MHN-084P


CGA-346 Air Continued 3,000 PSI

Nipple-Handtight
Nipple-Countersunk
Nipple-Check Valve
Nipple-CV 1/4” NPT, 2.5” Long Brass NP-753CV

Nipple-CV 1/4” NPT, 2.5” Long SS NP-753SSCV
Nipple-CV 1/4” NPT, 2.5” Long CP Brass MNP-753CV
Replacement Items
Soft Tip For HT-Nipple PCTFE T753-1
O-Ring For Quicknut Nipple Polyurethane OR-346
CGA-347 Air 3,001 - 5,500 PSI

Handtight Nuts
Nut-HT .830”-14NGO-RH-INT SS, Alum. Grip HTN-85SS
Nipple 1/4” NPT, 3” Long SS NP-765SS
Nipple 1/4” NPT, 3” Long CP Brass MNP-765
Nipple-Handtight Nipple-HT 1/4” NPT, 3” Long w/ O-Ring SS, Polyurethane NP-765SSW

Nipple-HT 1/4” NPT, 3” Long w/ O-Ring Brass, Polyurethane NP-765W
Nipple-Countersunk
Nipple-Check Valve Nipple-CV 1/4” NPT, 3” Long SS NP-765SSCV
Replacement Items O-Ring For HT- Nipple Polyurethane OR-347
CGA-350 Hydrogen/Methane/Natural Gas 3,000 PSI

Nut .830”-14NGO-LH-INT SS N-64SS
Handtight Nuts
Nut-HT .830”-14NGO-LH-INT Brass HTN-64

Nut-HT .830”-14NGO-LH-INT Brass, Plastic Grip HTN-64P
Nipple-Handtight
Nipple-HT 1/4” NPT, 2.5” Long Brass, PTFE NP-168T3
Nipple-HT-CS For 1/4” Tube Brass, PTFE NP-168T3C2
Nipple-Countersunk

Nipple-Check
pple Check Valve
Nipples for use with Nipple-RPV 1/4” NPT, 2.5” Long Brass, SS Pin NP-168-PIN-SS
Residual Pressure Nipple-RPV 1/4” NPT, 2.5” Long Brass, Monel Pin NP-168-PIN-M
Valves Nipple-RPV 1/4” NPT, 3.5” Long Brass, Retractable SS Pin NP-170-RPV
Replacement Items
Pin SS Pin for NP-168-PIN-SS SS PIN-NP-SS
Pin Monel Pin for NP-168-PIN-M Monel PIN-NP-M

CGA-410 Canadian Acetylene 500 PSI

CGA-415 Canadian Acetylene 500 PSI

Nipple-Threaded Inlet
Replacement
l Part
P
Washer For Nipple Fiber W-50
CGA-500 Medical Mixtures 3,000 PSI

Nut .880”-14NGO-RH-EXT Brass N-67

Nut .880”-14NGO-RH-EXT CP Brass MN-067
Handtight Nuts Nut-HT .880”-14NGO-RH-EXT Brass, Plastic Grip HTN-67P

Nut-HT .880”-14NGO-RH-EXT CP Brass, Plastic Grip MHN-067P
Nipple-Threaded Inlets Nipple 1/4” NPT, 2.5” Long Brass NP-188

Nipple-Handtight Nipple-HT 1/4” NPT, 3.5” Long Brass, PTFE NP-190T3

Nipple-HT 1/4” NPT, 3.5” Long w/ O-Ring Brass, Nitrile NP-190W
Nipple-HT 1/4” NPT, 3.5” Long w/ O-Ring CP Brass, Nitrile MNP-190W
Nipple-HT-CS For 5/16”Tube Brass, PTFE NP-188T3C3

Nipple-Check Valve

Nipple-CV 1/4” NPT, 3” Long Brass NP-189CV
Replacement Parts O-Ring For O-Ring Nipple Nitrile OR-580


CGA-510 Acetylene/Propane/Natural Gas 500 PSI

Nut .880”-14NGO-LH-EXT(7/8”Hex) Brass N-68

Nut .880”-14NGO-LH-EXT Brass N-69
Nut .880”-14NGO-LH-EXT SS N-69SS
Nut .880”-14NGO-LH-EXT CP Brass MN-069
Handtight Nuts
Nut-HT .880”-14NGO-LH-EXT Brass HTN-69
Nut-HT .880”-14NGO-LH-EXT Brass, Plastic Grip HTN-69P
Nipple-Threaded Nipple 1/4” NPT, 2.5” Long Brass NP-188

Inlets Nipple 1/4” NPT, 2.5” Long CP Brass MNP-188
Nipple-Handtight
Nipple-HT 1/4” NPT, 3” Long (only with HTN-69) Brass, PTFE NP-189T3
Nipple-HT 1/4” NPT, 3.5” Long, w/ soft tip Brass, PTFE NP-190T3
Nipple-HT 1/4” NPT, 3.5” Long w/ O-Ring Brass, Nitrile NP-190W

Nipple-Check Valve
Nipple-CV 1/4” NPT, 3” Long SS NP-189SSCV
Replacement Items
O-Ring For NP-190W Nitrile OR-580
CGA-520 “B Size” Acetylene In Small Cylinders 500 PSI

Handtight Nuts
Nipple-Handtight
Nipple-HT 1/4” NPT, 1.75” Long w/ O-Ring Brass, EPDM NP-435W
Nipple-Countersunk
Nipple-CS For 1/4”Tube Brass NP-435C2
Replacement Parts
O-Ring For HT EPDM OR-520Z
Notes:

CGA-540 Oxygen 3,000 PSI

Nut .908”-14NGO-RH-INT. Brass N-71

Nut .908”-14NGO-RH-INT. SS N-71SS
Handtight Nuts
Nipples -Threaded Inlets

Nipples - Handtight
Nipple-HT 1/4” NPT, 2.5” Long w/ O-Ring Brass/Viton NP-211W
Nipple-HT 1/4” NPT, 2.5” Long w/ O-Ring CP Brass/Viton MNP-211W
Nipple-HT 1/4” NPT, 2.5” Long Brass/PCTFE NP-211T1
Nipple-HT For 1/4” Tube Brass/PCTFE NP-211T1C2
Nipple-HT For 5/16” Tube Brass/PCTFE NP-211T1C3
Nipples - Countersunk Nipple-CS For 1/4” Tube Brass NP-210C2

Nipple - Check Valve

Nipples - Residual Nipple-RPV 1/4” NPT, 2.5” Long Brass (Monel Pin) NP-211-PIN-M
Pressure Valve Nipple-RPV 1/4” NPT, 2.5” Long Brass (SS Pin) NP-211-PIN-SS
Nipple-RPV 1/4” NPT, 2.5” Long w/ O-Ring Brass (Monel Pin) NP-211W-PIN-M
Nipple-RPV 1/4” NPT, 3.5” Long w/ O-Ring Brass (Retractable SS Pin) NP-213W-RPV
Replacement Items
Soft Tip For HT-Nipple PCTFE T211-1
O-Ring For Nipple Viton OR-540
O-Ring For O-Ring Nipple Viton OR-011V7
Pin For RPV Nipple Monel PIN-NP-M
CGA-555 Propane, Butane For Liquid Withdrawal 3,000 PSI

Handtight Nuts
Nut-HT .908”-14NGO-LH-INT Brass HTN-86

Nipple-Handtight Nipple-HT 1/4” NPT, 2.5” Long w/ o-ring Brass, Viton NP-211W
Nipple-HT 1/4” NPT, 2.5” Long w/ o-ring CP Brass, Viton MNP-211W
Nipple-Countersunk
pp
Nipple-CS For 5/16”Tube Brass NP-210C3
Nipple-Check Valve
Replacement Parts Soft Tip For Soft Tip-Nipple PCTFE T211-1

O-Ring For O-Ring-Nipple Viton OR-011V7
CGA-577 Oxygen 3,001 - 4,000 PSI


CGA-580 Argon, Helium, Nitrogen 3,000 PSI

Nut .960”-14NGO-RH-EXT Brass N-73

Nut .960”-14NGO-RH-EXT SS N-73SS
Nut .960”-14NGO-RH-EXT CP Brass MN-073
Handtight Nuts Nut, HT .960”-14NGO-RH-EXT Brass HTN-73

Nut, HT .960”-14NGO-RH-EXT CP Brass, Plastic Grip MHN-073P
Nut, HT .960”-14NGO-RH-EXT Brass, Plastic Grip HTN-73P

Nipple-Handtight Nipple-HT 1/4” NPT, 3” Long Brass, PTFE NP-189T3

Nipple-HT 1/4” NPT, 3.5” Long, w/ o’ ring Brass, Nitrile NP-190W

Nipple-CS For 1/4”Tube SS NP-188C2SS
Nipple-Check Valve
Nipples - Residual
Pressure Valve Nipple-RPV 1/4” NPT, 3.5” Long Brass, SS PIN NP-190-PIN-SS
Nipple-RPV 1/4” NPT, 3.5” Long Brass, Monel PIN NP-190-PIN-M
Nipple-RPV-O-Ring 1/4” NPT, 3.5” Long Brass, Retractable Pin NP-190W-RPV
Replacement Parts
Soft Tip For Soft Tip-Nipple PTFE T189-3
O-Ring For O-Ring-Nipple Nitrile OR-580
Pin For RPV Nipple Monel PIN-NP-M
CGA-590 6XOIXU+H[DÀXRULGH)RUPHUO\,QGXVWULDO$LU 3,000 PSI

Nut .960”-14NGO-LH-EXT Brass N-74
Nut .960”-14NGO-LH-EXT SS N-74SS
Nut .960”-14NGO-LH-EXT CP Brass MN-074
Nipple - Handtight
Nut-HT .960”-14NGO-LH-EXT Brass HTN-74

Nut-HT .960”-14NGO-LH-EXT Brass, Plastic HTN-74P

Nipple-Handtight
Nipple-HT 1/4” NPT, 3” Long Brass, PTFE NP-189T3
Nipple-HT 1/4” NPT, 3.5” Long, w/ o’ ring Brass, Nitrile NP-190W
Nipple-Countersunk
pp
Nipple-CS For 1/4”Tube SS NP-188C2SS
Nipple-Check Valve
Replacement
ent Parts
Soft Tip For Soft Tip-Nipple PTFE T189-3
O-Ring For O-Ring-Nipple Nitrile OR-580
CGA-621 Oil Tolerant Nitrogen 3,001-5,500 PSI

Nut 1.035”-14NGO-LH-INT Brass N-621

CGA-622-320 Carbon Dioxide For Liquid Withdrawal 500 PSI

Nut 1.035”-14NGO-RH-INT Brass N-622
/LTXLG&\OLQGHUWR+RVH$GDSWRU
Nipple 1.035”-14NGO-RH-INT to CGA 320 Brass A-622
CGA-624 Nitrous Oxide For Liquid Withdrawal 500 PSI

CGA-660 Refrigerant Gases 3,000 PSI

Hex Nuts
s Part Description Material Part No.
Nut 1.035”-14NGO-RH-INT SS N-77SS
Nut 1.035”-14NGO-RH-INT CP Brass MN-077
Nipple-Threaded Inlets Nipple* 1/4” NPT, 1.75” Long Brass NP-236

Nipple* 1/4” NPT, 2.5” Long Brass NP-238
Nipple* 1/4” NPT, 3” Long SS NP-239SS
Nipple-Countersunk
Nipple-CS* For 1/4” Tube SS NP-236C2SS
Nipple-Check Valve Nipple-CV 1/4” NPT, 2.5” Long SS NP-238SSCV
Replacement Item Washer For Nipple PTFE W-18
*Includes Washer
CGA-677 Argon/Nitrogen/Helium 5,501-7,500 PSI

Nut 1.035”-14NGO-LH-INT Brass N-80
Nut 1.035”-14NGO-LH-INT SS N-80SS

Nipple-Tube Sockets
CGA-680 Argon/Nitrogen/Helium 3,001-5,500 PSI

Nut 1.040”-14NGO-RH-EXT Brass N-680

Nut 1.040”-14NGO-RH-EXT SS N-680SS
Nipple 1/4” NPT, 2.5” Brass NP-842
Nipple 1/4” NPT, 2.5” SS NP-842SS
Nipple 1/4” NPT, 3” Brass NP-843
Nipple-Tube Sockets

CGA-695 Hydrogen/Methane 3,001-5,500 PSI
Nut 1.040”-14NGO-LH-EXT Brass N-695

Nipple-Countersunk
CGA-701 Oxygen 4,001-5,500 PSI


Nut 1.108”-18NGO-RH-INT SS N-701SS

Nipple 1/4” NPT, 3” SS NP-863SS
CGA-702 Air 5,501-7,500 PSI

Hex Nuts
ts Part Description Material Part No.
Nut 1.120”-14NGO-RH-EXT Brass N-702
Nut 1.120”-14NGO-RH-EXT CP Brass MN-702
Nipple 1/4” NPT, 3” CP Brass MNP-843
Nipple-Countersunk
pin indexed yokes
CGA-870 Oxygen CGA-940 CO2/Oxygen Mixture w/ CO2 Over 7%

Inlet Part No. Inlet Part No.
Yoke w/HT grip x CGA 540 male MFY-870-1H Yoke w/HT grip x 1/4” NPT male MFY-940-4H
Yoke w/T-handle x CGA 540 male MFY-870-1 Yoke w/T-handle x 1/4” NPT male MFY-940-4
Yoke w/HT grip x 1/4” NPT male MFY-870-4H Yoke w/HT grip x 1/2” NPT male MFY-940-8H
Yoke w/T-handle x 1/4” NPT male MFY-870-4 Yoke w/T-handle x 1/2” NPT male MFY-940-8
Yoke w/HT grip x 1/2” NPT male MFY-870-8H
Yoke w/T-handle x 1/2” NPT male MFY-870-8
Yoke w/S.S. HT grip x 1/4” NPT male MFY-870-4H-M
Yoke w/S.S. HT grip x 1/2” NPT male MFY-870-8H-M
CGA-880 CO2/Oxygen Mixture w/ CO2 Not Over 7% CGA-950 Medical Air

CGA-890 Helium/Oxygen Mixture w/ He Not Over 80% CGA-960 Nitrogen

CGA-910 Nitrous Oxide CGA-973 Medical Gas Mixtures

Replacement Parts for all Yokes Part No.
CGA-930 Helium/Oxygen Mixture w/ He Over 80%
T-handle MYP-001
Inlet Part No. Handtight handle MYP-002
Inlet bushing 1/4” NPT male MYP-004
Yoke w/HT grip x 1/4” NPT male MFY-930-4H Inlet bushing 1/2” NPT male MYP-008
ETFE washer MYP-010
Yoke w/T-handle x 1/4” NPT male MFY-930-4
Nylon washer MYP-011
Yoke w/HT grip x 1/2” NPT male MFY-930-8H
FKM washer MYP-012
Yoke w/T-handle x 1/2” NPT male MFY-930-8 6LQWHUHGLQOHW¿OWHU MYP-015
Stainless steel pin MYP-020
%XVKLQJ&*$RXWOHWPDOHZ¿OWHUMYP-540
S.S. Replacement Hand tight handle MYP-002Z

CGA manifold coupler tees
Oxygen
CGA-540
Nut
CGA-540 Outlet
C
CGA-540
MC-540
CGA-540 C-2580SS
C-2580
C 2580 C-2540CV
Brass
CGA No. Swivel Connection End Connection PSI Part No.
296 Industrial Oxygen Mixtures .803”-14NGO-RH-EXT .803”-14NGO-RH-INT (2) 3000 C-2296*
300 (Ethyl Chloride) .830”-14NGO-RH-INT .830”-14NGO-RH-EXT (2) 500 C-2300*
320 (Carbon Dioxide) .830”-14NGO-RH-INT .830”-14NGO-RH-EXT (2) 3000 C-2320*
326 (Nitrous Oxide) .830”-14NGO-RH-INT .830”-14NGO-RH-EXT (2) 3000 C-2326*
346 (Air) .830”-14NGO-RH-INT .830”-14NGO-RH-EXT (2) 3000 C-2346*
347 (Air) .830”-14NGO-RH-INT .830”-14NGO-RH-EXT (2) 5500 C-2347
350 (Hydrogen/Methane/Natural Gas) .830”-14NGO-LH-INT .830”-14NGO-LH-EXT (2) 3000 C-2350*
510 (Acetylene/Methane/Propane) .880”-14NGO-LH-EXT .880”-14NGO-LH-INT (2) 500 C-2510*
540 (Oxygen) .908”-14NGO-RH-INT .908”-14NGO-RH-EXT (2) 3000 C-2540*
555 (Butane/Propane-Liquid Withdrawal) .908”-14NGO-LH-INT .908”-14NGO-LH-EXT (2) 3000 C-2555
577 (Oxygen) .965”-14NGO-RH-INT .965”-14NGO-RH-EXT (2) 4000 C-2577
580 (Inert Gases) .960”-14NGO-RH-EXT .960”-14NGO-RH-INT (2) 3000 C-2580*
6XOIXU+H[DÀXRULGH ´1*2/+(;7 ´1*2/+,17 C-2590*
660 (Refrigerant Gases) 1.035”-14NGO-RH-INT 1.035”-14NGO-RH-EXT (2) 3000 C-2660
677 (Inert Gases) 1.035”-14NGO-LH-INT 1.035”-14NGO-LH-EXT (2) 7500 C-2677
680 (Inert Gases) 1.040”-14NGO-RH-EXT 1.040”-14NGO-RH-INT (2) 5500 C-2680
695 (Flammables) 1.040”-14NGO-LH-EXT 1.040”-14NGO-LH-INT (2) 5500 C-2695
701 (Oxygen) 1.108”-14NGO-RH-EXT 1.108”-14NGO-RH-INT (2) 5500 C-2701
702 (Air) 1.120”-14NGO-RH-EXT 1.120”-14NGO-RH-INT (2) 7500 C-2702
Chrome Plated Brass

320 (Carbon Dioxide) .830”-14NGO-RH-INT .830”-14NGO-RH-EXT (2) 3000 MC-320
326 (Nitrous Oxide) .830”-14NGO-RH-INT .830”-14NGO-RH-EXT (2) 3000 MC-326
346 (Air) .830”-14NGO-RH-INT .830”-14NGO-RH-EXT (2) 3000 MC-346
500 (Medical Mixture) .880”-14NGO-RH-EXT .880”-14NGO-RH-INT (2) 3000 MC-500
540 (Oxygen) .908”-14NGO-RH-INT .908”-14NGO-RH-EXT (2) 3000 MC-540
580 (Nitrogen/Helium) .960”-14NGO-RH-EXT .960”-14NGO-RH-INT (2) 3000 MC-580
Stainless Steel
320 (Carbon Dioxide) .830”-14NGO-RH-INT .830”-14NGO-RH-EXT (2) 3000 C-2320SS
346 (Air) .830”-14NGO-RH-INT .830”-14NGO-RH-EXT (2) 3000 C-2346SS
347 (Air) .830”-14NGO-RH-INT .830”-14NGO-RH-EXT (2) 5500 C-2347SS
350 (Hydrogen) .830”-14NGO-LH-INT .830”-14NGO-LH-EXT (2) 3000 C-2350SS
540 (Oxygen) .908”-14NGO-RH-INT .908”-14NGO-RH-EXT (2) 3000 C-2540SS
580 (Inert Gases) .960”-14NGO-RH-EXT .960”-14NGO-RH-INT (2) 3000 C-2580SS
677 (Inert Gases) 1.035”-14NGO-LH-INT 1.035”-14NGO-LH-EXT (2) 7500 C-2677SS
*Available with check valve nipple: Add CV to the end of part number.
coupler tees & manifold blocks
CGA-540
Nut CGA-580
Port
C
CGA-540 C-3580
Outlets
O
C-4540
CGA-580 Port
CGA-580 Port
Brass Manifold Coupler Tees - 4 way CGA Valve Outlets, Nut & Nipple Inlet
CGA No. Swivel Connection End Connections PSI Part No.
320 (Carbon Dioxide) .830”-14NGO-RH-INT .830”-14NGO-RH-EXT (3) 3000 C-4320*
346 (Air) .830”-14NGO-RH-INT .830”-14NGO-RH-EXT (3) 3000 C-4346*
510 (Acetylene/Propane) .880”-14NGO-LH-EXT .880”-14NGO-LH-INT (3) 500 C-4510*
540 (Oxygen) .908”-14NGO-RH-INT .908”-14NGO-RH-EXT (3) 3000 C-4540*
580 (Argon/Helium/Nitrogen) .960”-14NGO-RH-EXT .960”-14NGO-RH-INT (3) 3000 C-4580*
6XOIXU+H[DÀXRULGH ´1*2/+(;7 ´1*2/+,17 C-4590*
Brass Manifold Coupler Tees - 3 way CGA Valve Outlets

CGA No. End Connections PSI Part No.
540 (Oxygen) .830”-14NGO-RH-EXT (3) 3000 C-3540
580 (Argon/Helium/Nitrogen) .960”-14NGO-RH-INT (3) 3000 C-3580
*Available w/ Check Valve:

Add “CV” to end of part number
2” Hex Brass Body (with 6 valve outlets)
Brass/Stainless Steel Manifold Blocks & Assemblies

CGA No. Swivel Connection End Connection Part No.
540 (Oxygen) .908”-14NGO-RH-INT .908”-14NGO-RH-EXT (6) MB-540-7*
580 (Argon/Helium/Nitrogen) .960”-14NGO-RH-EXT .960”-14NGO-RH-INT (6) MB-580-7*
2” Hex Manifold Blocks (with Female Ports) MB-7

Connection Material PSI Part No.
1/4” FNPT (6) Brass 3000 MB-6
1/4” FNPT (6) SS 6000 MB-6SS
1/4” FNPT (7) Brass 3000 MB-7
1/4” FNPT (7) SS 6000 MB-7SS
1/4” FNPT(6) x 1/2”FNPT(2) Brass 4500 GMA-SCMB
GMA-SCMB
MB-6SS

brass “y” connectors
EZ-YV50
EZ-YV51
ERGONOMIC DESIGN
YV-50
YV-420
“Y” Connectors With Shut-Off Valves 200 PSI

Service Inlets Outlets Part No.
Oxygen “B” 9/16”-18-RH-INT Swivel Nut “B” 9/16”-18-RH-EXT YV-50

Fuel Gas “B” 9/16”-18-LH-INT Swivel Nut “B” 9/16”-18-LH-EXT YV-51
Oxygen “B” 9/16”-18-RH-INT Swivel Nut “B” 9/16”-18-RH-EXT (P.O.P.) EZ-YV50
Fuel Gas “B” 9/16”-18-LH-INT Swivel Nut “B” 9/16”-18-LH-EXT (P.O.P.) EZ-YV51
Argon “B” 5/8”-18-RH-EXT Swivel Nut “B” 5/8”-RH-INT YV-420
Air-Water “B” 5/8”-18-LH-EXT Swivel Nut “B” 5/8”-LH-INT YV-421
Y-80 Y-420
“Y” Connectors Without Shut-Off Valves 200 PSI

Oxygen “B” 9/16”-18-RH-INT Swivel Nut “B” 9/16”-18-RH-EXT Y-50

Oxygen “B” 9/16”-18-RH-INT Swivel Nut 1/4” FNPT Y-80
Fuel Gas “B” 9/16”-18-LH-INT Swivel Nut “B” 9/16”-18-LH-EXT Y-51
Fuel Gas “B” 9/16”-18-LH-INT Swivel Nut 1/4” FNPT Y-81
Argon 5/8”-18-RH-EXT Swivel Nut “B” 5/8”-18-RH-INT Y-420
Air-Water 5/8”-18-LH-EXT Swivel Nut “B” 5/8”-18-LH-INT Y-421
Y-224
“Y” Connectors With Pipe Threads 3,000 PSI

Non-Corrosive Gases 1/8” FNPT 1/4” FNPT Y-184
Non-Corrosive Gases 1/4” MNPT 1/4” FNPT Y-224
brass shut-off valves & dust caps
Brass Seat Shut-Off Valves 200 PSI

Service Inlet Outlet Part No.
Oxygen “B” 9/16”-18-RH-EXT “B” 9/16”-18-RH-EXT V-50

Oxygen “B”” 9/16”-18-RH-INT Swivel Nut “B” 9/16”-18-RH-EXT V-52
Oxygen “B” 9/16”-18-RH-EXT 1/4” MNPT V-76
Oxygen 1/4” MNPT “B” 9/16”-18-RH-EXT V-88
Fuel Gas 1/4” NPT-M “B” 9/16”-18LH-EXT V-89
Fuel Gas “A” 3/8”-24-LH-EXT 1/8” NPT-Male V-25
Fuel Gas “B” 9/16”-18-LH-EXT “B” 9/16”-18-LH-EXT V-51
Fuel Gas “B” 9/16”-18-LH-INT Swivel Nut “B” 9/16”-18-LH-EXT V-53
Fuel Gas “B” 9/16”-18-LH-EXT 1/8” MNPT V-69
Fuel Gas “B” 9/16”-18-LH-EXT 1/4” MNPT V-77
V-88 Fuel Gas “B” 9/16”-18-LH-EXT 1/4” FNPT V-81
Argon 5/8” -18-RH-EXT Swivel Nut “B” 5/8” -18-RH-INT “B” V-420
Argon 1/4” NPT-M 5/8” -18-RH-INT“B” V-454
3000 PSI
All Gases 1/8” MNPT 1/8” MNPT V-301
V-335 All Gases 1/4” FNPT 1/4” FNPT V-332
All Gases 1/4” MNPT 1/4” MNPT V-333
All Gases 1/4” FNPT 1/4” MNPT V-334
All Gases 1/4” MNPT 1/4” FNPT V-335
Dust Cap & Chain Assemblies (Non-Gas Tight)

CGA No. Gases Connection Part No.
Dust caps are one-piece blind nuts
used to protect threads and keep some 022 Oxygen Std. “B”9/16” -18-RH-INT CC-8020
contamination from cylinder valves. 023 Fuel Gas Std. “B”9/16” -18-LH-INT CC-8021
&*$WKUHDGVSHFL¿FDWLRQVDUHXVHG
024 Oxygen “C”7/8”-14-RH-INT CC-8034
but they do not make a gas tight seal.
025 Fuel Gas “C”7/8”-14-LH-INT CC-8035
300 Ethyl Chloride Acetylene .830”-14NGO-RH-INT CC-8300
320 Carbon Dioxide .830”-14NGO-RH-INT CC-8320
346 Air .830”-14NGO-RH-INT CC-8346
350 Hydrogen/Methane .830”-14NGO-LH-INT CC-8350
500 Medical Mixture .880”-14NGO-RH-EXT CC-8500
510 Acetylene/Propane .880”-14NGO-LH-EXT CC-8510
540 Oxygen .908”-14NGO-RH-INT CC-8540
3URSDQH/LTXLG:LWKGUDZDO ´1*2/+,17 CC-8555
CC-8540
580 Argon, Helium, Nitrogen .960”-14NGO-RH-EXT CC-8580
Oxygen
660 Refrigeration Gases 1.035”-14NGO-RH-INT CC-8660

brass plugs & plug & chain assemblies
Two-Piece Assemblies
These two-piece nut and blind CGA No. Gases Connection Gas Seal (PSI) Part No.
nipple assemblies are made to CGA 022 Oxygen “B”9/16 -18-RH-INT 200 PC-4020
standards and make a gas tight seal. 023 Fuel Gas “B”9/16 -18-LH-INT 200 PC-4021
024 Oxygen “C”7/8”-14-RH-INT 200 PC-4034
025 Fuel Gas “C”7/8”-14-LH-INT 200 PC-4035
026 Oxygen “D”1-1/4”-12-RH-INT 200 PC-4042
PC-4540 027 Fuel Gas “D”1-1/4”-12-LH-INT 200 PC-4043
032 Inert Gas “B”5/8”-18-RH-EXT 200 PC-4024
033 Air-Water “B”5/8”-18-LH-EXT 200 PC-4025
032 Inert Gas “B”5/8”-18-RH-INT 200 PC-4026
034 Inert Gas “C”7/8”-14-RH-EXT 200 PC-4036
326 Nitrous Oxide .830”-14NGO-RH-INT 3000 PC-4326
347 Air .830”-14NGO-RH-INT 5500 PC-4347
350 Hydrogen/Methane .830”-14NGO-LH-INT 3000 PC-4350
PC-4510
510 Acetylene/Propane .880”-14NGO-LH-EXT 500 PC-4510
520 Acetylene .899”-18NGO-RH-INT 500 PC-4520
540 Oxygen .908”-14NGO-RH-INT 3000 PC-4540
555 Propane .908”-14NGO-LH-INT 3000 PC-4555
580 Argon/Helium/Nitrogen .960”-14NGO-RH-EXT 3000 PC-4580
680 Argon/Helium/Nitrogen 1.040”-14NGO-RH-EXT 5500 PC-4680
One-Piece Assemblies - With Chain

These shorter one-piece plug and chains CGA No. Gases Connection Gas Seal(PSI) Part No.
can be used, where space is limited, to 320 Carbon Dioxide .830”-14NGO-RH-INT 500 PC-320
seal off cylinder valves and still be able 326 Nitrous Oxide .830”-14NGO-RH-INT 3000 PC-326
to install the cylinder valve cap. The part 330 Non-Corrosive Gas .830”-14NGO-LH-INT 3000 PC-330
makes a gas tight seal. Nipples have 346 Air .830”-14NGO-RH-INT 3000 PC-346
replaceable soft tips or o-rings. 350 Hydrogen/Methane .830”-14NGO-RH-INT 3000 PC-350
PC-580 510 Acetylene/Propane .880”-14NGO-LH-EXT 500 PC-510
Argon, Helium, 540 Oxygen .908”-14NGO-LH-INT 3000 PC-540
Nitrogen 555 Propane .908”-14NGO-LH-INT 3000 PC-555
580 Argon/Helium/Nitrogen .960”-14NGO-RH-EXT 3000 PC-580
6XOIXU+H[DÀXRULGH,QG$LU.960”-14NGO-LH-EXT 3000 PC-590
PC-540
Oxygen
One-Piece Assemblies - Without Chain

These shorter one-piece plugs (sold CGA No. Gases Connection Gas Seal(PSI) Part No.
without chains) can be used, where 022 Oxygen 9/16”-18RH-INT 200 P-022
space is limited, to seal off cylinder 023 Fuel Gas 9/16”-18LH-INT 200 P-023
valves and still be able to install the 024 Oxygen 7/8”-14RH-INT 200 P-024
cylinder valve cap. The part makes a 025 Fuel Gas 7/8”-14LH-INT 200 P-025
gas tight seal. Nipples have replaceable 026 Oxygen 1.25”-12RH-INT 200 P-026
soft tips or o-rings. 027 Fuel Gas 1.25”-12LH-INT 200 P-027
032 Inert 5/8”-18RH-EXT 200 P-032
032 Inert 5/8”-18RH-INT 200 P-032INT
033 Industrial Air 5/8”-18LH-EXT 200 P-033
P-580 034 Inert 7/8”-14RH-EXT 200 P-034
Argon, Helium, 200 Acetylene “MC” .625”-20RH-INT 500 P-200
Nitrogen 300 Acetylene .830”-14NGO-RH-INT 500 P-300
320 Carbon Dioxide .830”-14NGO-RH-INT 500 P-320
326 Nitrous Oxide .830”-14NGO-RH-INT 3000 P-326
330 Non-Corrosive Gas .830”-14NGO-LH-INT 3000 P-330
346 Air .830”-14NGO-RH-INT 3000 P-346
P-540 350 Hydrogen/Methane .830”-14NGO-RH-INT 3000 P-350
Oxygen 510 Acetylene/Propane .880”-14NGO-LH-EXT 500 P-510
540 Oxygen .908”-14NGO-LH-INT 3000 P-540
555 Propane .908”-14NGO-LH-INT 3000 P-555
580 Argon/Helium/Nitrogen .960”-14NGO-RH-EXT 3000 P-580
590 6XOIXU+H[DÀXRULGH,QG$LU .960”-14NGO-LH-EXT 3000 P-590
valve outlet adaptors
CGA No. Valve Outlet Adaptors Male & Female Pipe Threads Material PSI Part No.
Gas Connection x NPT
Male NPT
180 Non-Corrosive .620”-18UNF-2B-RH-EXT x 1/4 MNPT Brass 3,000 A-518
180 Non-Corrosive .620”-18UNF-2B-RH-EXT x 1/4 MNPT S.S. 3,000 A-518SS
Female NPT
296 Industrial Oxygen Mixtures .803” UNS-2B-RH-INT x 1/4 FNPT Brass 3,000 N-853A
Male NPT
300 Ethyl Chloride (formerly Acetylene) .825” 14NGO-RH-EXT x 1/4 MNPT Brass 500 A-531
300 Ethyl Chloride (formerly Acetylene) .825” 14NGO-RH-EXT x 1/2 MNPT Brass 500 A-533
Male NPT
320 Carbon Dioxide .825” 14NGO-RH-EXT x 1/4 MNPT Brass 3,000 A-541
320 Carbon Dioxide w/ Check Valve .825” 14NGO-RH-EXT x 1/2 MNPT Brass 3,000 A-543CV
Female NPT
320 Carbon Dioxide .825” 14NGO-RH-EXT x 1/4 MNPT Brass 3,000 N-854A
330 &DUERQ6XO¿GH .825” 14NGO-LH-EXT x 1/4 FNPT Brass 3,000 N-330A
Male NPT 326 Nitrous Oxide .825” 14NGO-RH-EXT x 1/4 MNPT Brass 3,000 A-631
326 Nitrous Oxide .825” 14NGO-RH-EXT x 1/4 MNPT CP Brass 3,000 MA-631
326 Nitrous Oxide .825” 14NGO-RH-EXT x 3/8 MNPT Brass 3,000 A-632
326 Nitrous Oxide w/ Check Valve .825” 14NGO-RH-EXT x 3/8 MNPT Brass 3,000 A-632CV
326 Nitrous Oxide .825” 14NGO-RH-EXT x 1/2 MNPT Brass 3,000 A-633
326 Nitrous Oxide w/ Check Valve .825” 14NGO-RH-EXT x 1/2 MNPT Brass 3,000 A-633CV
Female NPT
326 Nitrous Oxide .825” 14NGO-RH-EXT x 1/4 FNPT Brass 3,000 N-811A
326 Nitrous Oxide .825” 14NGO-RH-EXT x 1/4 FNPT CP Brass 3,000 MN-326A
Male NPT
346 Air .825” 14NGO-RH-EXT x 1/4 MNPT Brass 3,000 A-641
346 Air .825” 14NGO-RH-EXT x 1/4 MNPT CP Brass 3,000 MA-641
346 Air .825” 14NGO-RH-EXT x 1/4 MNPT S.S. 3,000 A-641SS
346 Air w/ Check Valve .825” 14NGO-RH-EXT x 3/8 MNPT Brass 3,000 A-642CV
346 Air w/ Check Valve .825” 14NGO-RH-EXT x 1/2 MNPT Brass 3,000 A-643CV
Female NPT
346 Air .825” 14NGO-RH-EXT x 1/4 FNPT Brass 3,000 N-866A
346 Air .825” 14NGO-RH-EXT x 1/4 FNPT S.S. 3,000 N-866A-SS
346 Air .825” 14NGO-RH-EXT x 1/4 FNPT CP Brass 3,000 MN-346A
Male NPT
347 Air .825” 14NGO-RH-EXT x 1/4 MNPT S.S. 5,500 A-661SS
(347 continue next page)

Female NPT
347 Air .825” 14NGO-RH-EXT x 1/4 FNPT Brass 5,500 N-347A
347 Air .825” 14NGO-RH-EXT x 1/4 FNPT S.S. 5,500 N-347A-SS
Male NPT
350 Hydrogen/Methane/Natural Gas .825” 14NGO-LH-EXT x 1/4 MNPT Brass 3,000 A-551
350 Hydrogen/Methane/Natural Gas .825” 14NGO-LH-EXT x 1/2 MNPT Brass 3,000 A-553
Female NPT
350 Hydrogen/Methane/Natural Gas .825” 14NGO-LH-EXT x 1/4 FNPT Brass 3,000 N-874A
350 Hydrogen/Methane/Natural Gas .825” 14NGO-LH-EXT x 1/4 FNPT S.S. 3,000 N-874A-SS
350 Hydrogen/Methane/Natural Gas .825” 14NGO-LH-EXT x 1/4 FNPT CP Brass 3,000 MN-350A
Female NPT
410 Canadian Acetylene .850” 14NGO-LH-EXT x 1/4 FNPT Brass 500 N-836A
Male
M l NPT
500 Medical Mixtures .885” 14NGO-RH-INT x 1/4 MNPT Brass 3,000 A-571
500 Medical Mixtures w/ Check Valve .885” 14NGO-RH-INT x 3/8 MNPT Brass 3,000 A-572CV
500 Medical Mixtures w/ Check Valve .885” 14NGO-RH-INT x 1/2 MNPT Brass 3,000 A-573CV
Female NPT
500 Medical Mixtures .885” 14NGO-RH-INT x 1/4 FNPT Brass 3,000 N-807A
500 Medical Mixtures .885” 14NGO-RH-INT x 1/4 FNPT CP Brass 3,000 MN-500A
Male NPT
510 Acetylene/Propane/Natural Gas .885” 14NGO-LH-INT x 1/4 MNPT Brass 500 A-581
510 Acetylene/Propane/Natural Gas .885” 14NGO-LH-INT x 1/2 MNPT Brass 500 A-583
Female NPT
510 Acetylene/Propane/Natural Gas .885” 14NGO-LH-INT x 1/4 FNPT Brass 500 N-800A
510 Acetylene/Propane/Natural Gas .885” 14NGO-LH-INT x 1/4 FNPT CP Brass 500 MN-510A
N-802A
510-90 Acetylene/Propane/Natural Gas .885” 14NGO-LH-INT x 1/4 FNPT Brass 500 N-802A
Male NPT
540 Oxygen .903” 14NGO-RH-EXT x 1/4 MNPT Brass 3,000 A-591
540 Oxygen .903” 14NGO-RH-EXT x 1/4 MNPT S.S. 3,000 A-591SS
540 Oxygen w/ Check Valve .903” 14NGO-RH-EXT x 3/8 MNPT Brass 3,000 A-592CV
540 Oxygen w/ Check Valve .903” 14NGO-RH-EXT x 1/2 MNPT Brass 3,000 A-593CV
Female NPT
540 Oxygen .903” 14NGO-RH-EXT x 1/4 FNPT Brass 3,000 N-876A
540 Oxygen .903” 14NGO-RH-EXT x 1/4 FNPT S.S. 3,000 N-876A-SS
540 Oxygen .903” 14NGO-RH-EXT x 1/4 FNPT CP Brass 3,000 MN-540A
Male NPT
555 Propane/Butane IRU/LTXLG:LWKGUDZDO .903” 14NGO-LH-EXT x 1/4 MNPT Brass 3,000 A-651
555 Propane/Butane IRU/LTXLG:LWKGUDZDO .903” 14NGO-LH-EXT x 1/2 MNPT Brass 3,000 A-653
Female NPT
555 Propane/Butane IRU/LTXLG:LWKGUDZDO .903” 14NGO-LH-EXT x 1/4 FNPT Brass 3,000 N-885A
Male NPT
Female NPT
577 Oxygen .960” 14NGO-RH-EXT x 1/4 FNPT Brass 4,000 N-577A
Male NPT 580 Argon/Helium/Nitrogen .965” 14NGO-RH-INT x 1/4 MNPT Brass 3,000 A-601
580 Argon/Helium/Nitrogen .965” 14NGO-RH-INT x 3/8 MNPT Brass 3,000 A-602
580 Argon/Helium/Nitrogen w/ Check Valve .965” 14NGO-RH-INT x 3/8 MNPT Brass 3,000 A-602CV
580 Argon/Helium/Nitrogen w/ Check Valve .965” 14NGO-RH-INT x 1/2 MNPT Brass 3,000 A-603CV
Female NPT
580 Argon/Helium/Nitrogen .965” 14NGO-RH-INT x 1/4 FNPT Brass 3,000 N-862A

580 Argon/Helium/Nitrogen .965” 14NGO-RH-INT x 1/4 FNPT S.S. 3,000 N-862ASS
580 Argon/Helium/Nitrogen .965” 14NGO-RH-INT x 1/4 FNPT CP Brass 3,000 MN-580A
Male NPT
590 6XOIXU+H[DÀXRULGH,QGXVWULDO$LU .965” 14NGO-LH-INT x 1/4 MNPT Brass 3,000 A-611
Female NPT
590 6XOIXU+H[DÀXRULGH,QGXVWULDO$LU .965” 14NGO-LH-INT x 1/4 FNPT Brass 3,000 N-954A
590 6XOIXU+H[DÀXRULGH,QGXVWULDO$LU .965” 14NGO-LH-INT x 1/4 FNPT CP Brass 3,000 MN-590A
Male NPT
622 Carbon Dioxide /LTXLG:LWKGUDZDO 1.030” 14NGO-RH-EXT x 3/8 MNPT Brass 500 A-722
Male NPT
624 Nitrous Oxide /LTXLG:LWKGUDZDO 1.030” 14NGO-RH-EXT x 3/8 MNPT Brass 500 A-732
Female NPT
660 Refrigerant Gases 1.030” 14NGO-RH-EXT x 1/4 FNPT Brass 3,000 N-880A
660 Refrigerant Gases 1.030” 14NGO-RH-EXT x 1/4 FNPT CP Brass 3,000 MN-660A
Male NPT
677 Argon/Helium/Nitrogen 1.030” 14NGO-LH-EXT x 1/4 MNPT Brass 7,500 A-671
677 Argon/Helium/Nitrogen 1.030” 14NGO-LH-EXT x 1/4 MNPT S.S. 7,500 A-671SS
677 Argon/Helium/Nitrogen 1.030” 14NGO-LH-EXT x 1/2 MNPT Brass 7,500 A-673
677 Argon/Helium/Nitrogen 1.030” 14NGO-LH-EXT x 1/2 MNPT S.S. 7,500 A-673SS
Female NPT
677 Argon/Helium/Nitrogen 1.030” 14NGO-LH-EXT x 1/4 FNPT Brass 7,500 N-677A

677 Argon/Helium/Nitrogen 1.030” 14NGO-LH-EXT x 1/4 FNPT S.S. 7,500 N-677A-SS
Male
M l NPT
680 Argon/Helium/Nitrogen 1.045” 14NGO-RH-INT x 1/4 MNPT Brass 5,500 A-681

680 Argon/Helium/Nitrogen 1.045” 14NGO-RH-INT x 1/2 MNPT Brass 5,500 A-683
Female NPT
680 Argon/Helium/Nitrogen 1.045” 14NGO-RH-INT x 1/4 FNPT Brass 5,500 N-680A
Male NPT
701 Oxygen 1.103” 18NGO-RH-EXT x 1/2 MNPT Brass 5,500 A-753
Female NPT
701 Oxygen 1.103” 18NGO-RH-EXT x 1/4 FNPT Brass 5,500 N-701A

Male NPT
702 Air 1.125” 14NGO-RH-INT x 1/2 MNPT Brass 7,500 A-763
Female NPT
702 Air 1.125” 14NGO-RH-INT x 1/4 FNPT Brass 7,500 N-702A

brass cga cylinder to regulator adaptors
CGA 200-300 Part No. CGA 200-510 Part No. CGA 200-510 Part No. CGA 200-520 Part No.
500 PSI A-775 500 PSI A-780 500 PSI A-781 500 PSI A-783
Acetylene Acetylene “MC” Acetylene “MC”
Acetylene Cylin-
ylinder
nder
Cylinder Cylinder (CGA-200) nder
der (CGA-
Cylinder (CGA 200))
der (CGA-200)
G
GA-200)
(CGA-200)
Commercial Acetylene Acetylene P

P.O.L.
OL Acetylene P.O.L. Acet lene B
Acetylene
Regulator (CGA-300) Regulator (CGA-510) Regulator (CGA-510) Regulator (CGA-520)
CGA 200-520 Part No. CGA 280-540 PartCGA

No. 200-300 250 PSIPart No.
CGA 280-590 CGA 300-200 Part No.
Acetylene “MC” Medical Breathing Mixtures
Mi Medical Breathing Mixtures
Mixtur
Mix tures
es Commercial Acetylene
Cylinder (CGA-200) 80 Cylinder
CGA-280 Cyli
yl nde
nder
CGA-280 Cylinder Cylinder (CGA-300)
Oxygen
Ox Industrial Air
Re
Regulator (CGA-590) Acetylene “MC”
Acetylene B
(C
(CGA-540) Regulator Regulator (CGA-200)
Regulator (CGA-520)
CGA 200-300 250 PSI
CGA 300-510 Part No. CGA 300-510
0 Part No. CGA 300-510 Part No. CGA 300-520 Part No.
Commercial Acetylene Commercial Acetylene Commercial Acetylene
Commercial Acetylene
Cylinder (CGA-300) Cylinder (CGA-300) Cylinder (CGA-300)
Cylinder
ylinder (CGA-300)
1 pc. Adaptor
Acetylene P
P.O.L.
Acetylene P.O.L. Regulator (CGA-510) 510 Acetylene P.O.L. Acetylene B
Regulator (CGA-510) Regulator (CGA-510) Regulator (CGA-520)
Carbon Dioxide Carbon Dioxide Air Cylinder Air Cylinder
Cylinder (CGA-320) Cylinder (CGA-320) (CGA-346) (CGA-346)
1 pc. Adaptor
Argon, Helium, or Nitrogen Oxygen

Argon, Helium, or Nitrogen Argon, Helium, or Nitrogen
Regulator (CGA-580) Regulator
Regulator (CGA-580) Regulator (CGA-580)
(CGA-540)
3000 PSI A-820 500 PSI A-827 3000 PSI A-909 3,000 PSI A-912
Hydrogen, Methane Canadian L.A. Medical Mixtures
ures
ure Medical Mixtures
Cylinder (CGA-350) Acetylene Cylinder Cylinder (CGA-500)
GA-5
A-500)
00 Cylinder
(CGA-415) (CGA-500)
Oxygen
Argon, Helium, or Nitrogen Acetylene P.O.L. Regulator Argon, Helium, or Nitrogen
Regulator (CGA-580) Regulator (CGA-510) (CGA-540) Regulator (CGA-580)
Acetylene P.O.L. Acetylene P.O.L.
Acetylene P.O.L. Cylinder (CGA-510) Acetylene P.O.L.
Cylinder (CGA-510)
Cylinder (CGA-510) Cylinder (CGA-510)
1 pc Adaptor
Canadian Acetylene
Acetylene “MC” Commercial Acetylene Commercial Acetylene Regulator (CGA-410)
Regulator (CGA-200) Regulator (CGA-300) Regulator (CGA-300)
CGA 510-510 Part No. CGA 510-520 PartCGA CGA 520-200

No. 200-300 250 PSI
Part No. CGA 520-300 Part No.
Acetylene P.O.L. Acetylene P.O.L. Acetylene B Acetylene B
Cylinder (CGA-510) Cylinder (CGA-510) Cylinder (CGA-520) Cylinder (CGA-520)
Acetylene P.O.L. Acetylene B Acetylene “MC”

“MC
“M Commercial Acetylene
Regulator (CGA-510) Regulator (CGA-520) Regulator (CGA-200) Regulator (CGA-300)
Acetylene B Acetylene B Oxygen Cylinder Oxygen Cylinder
Cylinder (CGA-520) nder
der (CGA-520)
Cylinder (CGA-540) (CGA-540)
Air
Acetylene P.O.L. Acetylene P.O.L. Regulator Argon, Helium, or Nitrogen
Regulator (CGA-510) Regulator (CGA-510) (CGA-346) Regulator (CGA-580)

Propane (L.W.) Propane (L.W.) Argon, Helium, or Nitrogen Argon, Helium, or Nitrogen
Cylinder (CGA-555) Cylinder (CGA-555) Cylinder (CGA-580) Cylinder (CGA-580)
Acetylene P.O.L. Argon, Helium, or Nitrogen Carbon Dioxide Air Regulator

Regulator (CGA-510) Regulator (CGA-580) Regulator (CGA-320) (CGA-346)
Argon, Helium, or Nitrogen Argon, Helium, or Nitrogen Industrial Air Cylinder
Cylinder (CGA-580) Cylinder (CGA-580) (CGA-590) Industrial Air Cylinder
(CGA-590)
Industrial Air Air Regulator Argon, Helium, or Nitrogen

Oxygen Regulator (CGA-346) Regulator (CGA-580)
Regulator (CGA-590)
(CGA-540)
FU\RJHQLFKRVH ÀWWLQJV
FLARE TUBING ADAPTORS 500 PSI

CGA Connection Gas Part No.
&*$PDOH ´ÀDUH[´0137 5HIULJHUDQWV FA-1651
&*$PDOH ´ÀDUH[´0137 &U\RJHQLF,QHUW FA-2952
&*$PDOH ´ÀDUH[´0137 &U\RJHQLF2[\JHQ FA-4402
FA-4404
&*$/+PDOH ´ÀDUH[´0137 0HWKDQH1DWXUDO*DV FA-4502
CGA 440 Oxygen Cryogenic Transfer Hose CGA 295 Nitrogen Cryogenic Transfer Hose
(B)=Brass Ends (S)=Stainless Steel Ends – Insert type of material. (B)=Brass Ends (S)=Stainless Steel Ends
500 PSI 500 PSI
STAINLESS STEEL STAINLESS STEEL

CHS-440-440-72 CHS-295-295-72
CGA 440 female both ends 48” long CH( )-440-440-48 CGA 295 female both ends 48” long CH( )-295-295-48
*Other lengths available. Call for part number. Example - CHS-295-295-72 = CGA Stainless Steel ends 72” long
Quick Connect Handwheel Quick Connect Tee Handle
500 PSI 500 PSI
Oxygen CGA 440 Handwheel HTC-440 Oxygen CGA 440 Tee Handle CHTE-440
Nitrogen/Inert CGA 295 Handwheel HTC-295 Nitrogen/Inert CGA 295 Tee Handle CHTE-295
Cryogenic Phase Separator Fill Elbow
500 PSI 500 PSI
3/8” female NPT CPS-001 Oxygen CGA 440 CEL-440

Nitrogen/Inert CGA 295 CEL-295

rigid copper & stainless steel pigtails
PTH-4346
PT-4540CV
(Approximately 20” Overall Length)
PT-540CV
PT-540SS
5LJLG3LJWDLO$VVHPEOLHVZLWK6LQJOH 'RXEOH/RRS
Operating Standard Plastic H.T. Brass Wrench S.S. Tube & Copper pigtail
CGA No.
Pressure (PSI) Pigtail Nut-One End One End S.S Ends 2 loops,brass ends
300 250 *PT-3300 *PTH-3300 *PTW-3300 N/A *PT-300
320 3000 PT-4320 PTH-4320 PTW-4320 PT-320SS PT-320
326 3000 PT-4326 PTH-4326 PTW-4326 PT-326SS PT-326
346 3000 PT-4346 PTH-4346 PTW-4346 PT-346SS PT-346
350 3000 PT-4350 PTH-4350 PTW-4350 PT-350SS PT-350
510 500 PT-4510 PTH-4510 PTW-4510 PT-510SS PT-510
510-90° 250 *PT-3510 *PTH-3510 *PTW-3510 N/A N/A
540 3000 PT-4540 PTH-4540 PTW-4540 PT-540SS PT-540
580 3000 PT-4580 PTH-4580 PTW-4580 PT-580SS PT-580
590 3000 PT-4590 PTH-4590 PTW-4590 PT-590SS PT-590
To add check valve to inlet, add “CV”. For reverse check valve on outlet, add “RCV” (see pg. 23 for explanation).
* All pigtails designated for Acetylene service are built with brass tubing.
Annealed Copper Coiled Tubing 3000 psi Part No.

Seamless copper tubing 1/4”O.D. x .065 wall CT-44
Seamless copper tubing 5/16”O.D. x .065 wall CT-45 CT-44
50 ft. Rolls, Not Cleaned for 02 service
NPT ends for copper & brass tubing 3000 psi Part No.
Male 1/4” NPT x 5/16” O.D. Tubing XPTE-004C3
Female 1/4” NPT x 1/4” O.D. Tubing XPTE-005C2
Female 1/4” NPT x 1/4” O.D. Tubing, Stainless Steel XPTE-005C2SS
Female 1/4” NPT x 5/16” O.D. Tubing XPTE-005C3
XPTE-005C3 XPTE-004C3
Snap rings for pigtail nut & nipples

Snap Ring - Secures Nut to Nipple XSR-020 XSR-020
Standard package of 25
ÁH[LEOHKRVHW\SHV
min. length=6”
max length=600”
PTFE/STAINLESS BRAIDED HOSE 36,:25.,1*35(6685(
EXAMPLE PTF - 580H - 580 - 24
Hose Type Inlet Outlet Length
Superior PTF Series PTFE Lined Stainless Braided Pigtails are designed for 3000 PSI working
pressure for a broad range of applications. Comes standard with stainless steel ferrules for longer
service life. Available with Armor Guard or spring guard.
Not recommened for lighter than
6SHFL¿FDWLRQV ´1RPLQDO,' air gases based on effusion
%UDLGLV7\SHVWDLQOHVVVWHHO
EXAMPLE: 7HPSHUDWXUHUDWLQJFWRF
PTF-580H-580-24 %XUVWSUHVVXUHLV36,DWURRPWHPSHUDWXUH
0LQLPXPEHQGUDGLXVRILQFKHVIRUPD[LPXPVDIHW\ OLIH
ETFE/STAINLESS BRAIDED HOSE 36,:25.,1*35(6685(

EXAMPLE PTFT - 34I - 34I - 24
For use in Helium and Hydrogen gas service to reduce effusion of lighter than air gases. ETFE Hose
is also good for high purity applications where off gassing of hydrocarbons and low diffusion rate is a
concern. Please note ETFE has a lower diffusion rate than PTFE, although it does not provide zero
effusion. For zero effusion, use rigid copper, brass or stainless steel. Available with Armor Guard or
spring guard.
EXAMPLE:
PTFT-34I-34I-24 6SHFL¿FDWLRQV ´1RPLQDO,'
%UDLGLV7\SHVWDLQOHVVVWHHOOLQLQJLV(7)(
7HPSHUDWXUHUDWLQJFWRF
%XUVWSUHVVXUHLV36,DWURRPWHPSHUDWXUH
NYLON SYNTHETIC BRAIDED HOSE 36,:25.,1*35(6685(
EXAMPLE PTFN - N 34I - N34I - 24
For use in Helium and Hydrogen gas service to reduce effusion of lighter than air gases. Please note
synthetic nylon tube has a lower diffusion rate than PTFE, although it does not provide zero effusion.
For zero effusion, use rigid copper, brass or stainless steel. Available with Armor Guard or spring guard.
Not for oxygen service
6SHFL¿FDWLRQV ´1RPLQDO,'
%UDLGLVV\QWKHWLFILEHUOLQLQJLVH[WUXGHGQ\ORQSRO\XUHWKDQHFRYHU
PTFN-N341-N341-24 %XUVWSUHVVXUHLV36,DWURRPWHPSHUDWXUH
PTFE/STAINLESS DOUBLE BRAIDED HOSE 36,:25.,1*35(6685(

EXAMPLE PTF6 - 680 - 641SS - 24
For newer high pressure CGA’s. PTFE lined, stainless braided hose is available with or without Armor
Guard for 6,000 PSI working pressure.
PTF6-680-64ISS-24 %XUVWSUHVVXUHLV36,DWURRPWHPSHUDWXUH
POST SINTERED, DOUBLE BRAIDED, PTFE HOSE 36,:25.,1*35(6685(

PTF36 - 34I - 34I - 24
EXAMPLE
For newer high pressure CGA’s. PTFE lined, stainless braided hose is available with or without Armor
Guard for 3,600 PSI working pressure.
PTF36-34I-34I-24 %XUVWSUHVVXUHLV36,DWURRPWHPSHUDWXUH

NFPA compliant hospital pigtails
NFPA Replacement Pigtails for Hospital Medgas Systems
|__________________________________________ Aprox. 20” ______________________________

|
304 Stainless Steel Braid Annealed Copper Tubing

37)(&RUH ´2'[ZDOO
36,:RUNLQJ3UHVVXUH 6LOYHU%UD]HG(QG)LWWLQJV
/HDN7HVWHG %DJJHG 36,:RUNLQJ3UHVVXUH
3HUPDQHQWQRQUHPRYDEOH&*$¿WWLQJHQGVSHU1)3$FRGH 3HUPDQHQWQRQUHPRYDEOH&*$¿WWLQJ
6WDLQOHVV6WHHO%UDLGQRWIRUXVHZLWK2[\JHQ ends per NFPA code
Gas Service Inlet/Outlet Threads Hose Materials Part No.

&DUERQ'LR[LGH &*$)HPDOH1XW 6WDLQOHVV6WHHO7HÀRQ PTFP-320-24 or 36
1LWURXV2[LGH &*$)HPDOH1XW 6WDLQOHVV6WHHO7HÀRQ PTFP-326-24 or 36
0HGLFDO$LU &*$)HPDOH1XW 6WDLQOHVV6WHHO7HÀRQ PTFP-346-24 or 36
0HGLFDO0L[WXUH &*$0DOH1XW 6WDLQOHVV6WHHO7HÀRQ PTFP-500-24 or 36
1LWURJHQ+HOLXP &*$0DOH1XW 6WDLQOHVV6WHHO7HÀRQ PTFP-580-24 or 36
Oxygen CGA 540 Female Nut Copper/Brass ends PT-4540
Nitrous Oxide CGA 326 Female Nut Copper/Brass ends PT-4326
72” Liquid Cylinder Gas Use Pigtails

Black polyester blend perforated cover
for use with Dewar manifold systems
´,'1\ORQ&RUH
36,:RUNLQJ3UHVVXUH
7HPSHUDWXUHUDWLQJ)WR)
Permanent non removable CGA
¿WWLQJHQGVSHU1)3$FRGH
Gas Service Inlet/Outlet Threads Hose Material Part No.

Carbon Dioxide CGA 320 Female Nut 3/8” I.D. Nylon Tube PFSL-320-72
Nitrous Oxide CGA 326 Female Nut 3/8” I.D. Nylon Tube PFSL-326-72
Medical Air CGA 346 Female Nut 3/8” I.D. Nylon Tube PFSL-346-72
Medical Mixture CGA 500 Male Nut 3/8” I.D. Nylon Tube PFSL-500-72
Oxygen CGA 540 Female Nut 3/8” I.D. Nylon Tube PFSL-540-72
Nitrogen, Helium CGA 580 Male Nut 3/8” I.D. Nylon Tube PFSL-580-72
7KHSLJWDLOVRQWKLVSDJHDUHVSHFLDOO\GHVLJQHGWRPHHWWKHUHTXLUHPHQWVRI1)3$IRU+RVSLWDOPHGJDVPDQLIROGV\VWHPV7KH
PDMRUIHDWXUHEHLQJ1)3$¶VUHTXLUHPHQWIRUSHUPDQHQWDI¿[HGHQGVWRDYRLGFURVVFRQQHFWLRQWKURXJKPRGL¿FDWLRQRUVZLWFKLQJ
RIWKHQXWDQGQLSSOHWRKRRNXSDGLIIHUHQWJDVWKDQDV\VWHPZDVGHVLJQHGIRU7KHRWKHUUHTXLUHPHQWLVDPDQGDWRU\FRSSHU
SLJWDLOIRUXVHLQKLJKSUHVVXUHR[\JHQVHUYLFH6RPHVWDWHVDOVRUHTXLUHWKDWEHFDXVH1LWURXV2[LGHLVDQR[LGL]HUFRSSHULV
DOVRUHTXLUHG
ÁH[LEOHSLJWDLOV
STANDARD 1/4 Inch Flexible PIGTAILS
6WDLQOHVV6WHHO%UDLG
PTF-34I-34I-24
37)(RU(7)(&RUH PTF6-64ISS-64ISS-24
RU36,:RUNLQJ3UHVVXUH
3UHVVXUH7HVWHG
&OHDQHG EDJJHGIRUR[\JHQVHUYLFH
6WDLQOHVV6WHHO&ROODU
Stainless Steel Braided PTFE or ETFE with 1/4” NPT Female Brass Ends
Materials Inlet Threads Outlet Threads Length Part No.
PTFE core/SS braid, brass ends 1/4”NPT female X 1/4”NPT female 18” PTF-34I-34I-18
ETFE core/SS braid, brass ends 1/4”NPT female X 1/4”NPT female 18” PTFT-34I-34I-18
Stainless Steel Double Braided PTFE with 1/4” NPT Female Stainless Steel Ends
Materials Inlet Threads Outlet Threads Length Part No.
PTFE core/SS braid, SS ends 1/4”NPT female X 1/4”NPT female 18” PTF6-64ISS-64ISS-18
SPECIAL CONFIGURED PIGTAILS

Ordering Information
6XSHULRU¶VÀH[LEOHKRVHDVVHPEOLHVDUHPDGHWRRUGHUWHVWHGDQGLQGLYLGXDOO\EDJJHG(DFKFRQ¿JXUHGSDUWQXPEHU
consists of four elements: (see below) The 1stSODFHKROGHUVSHFL¿HVWKHW\SHRIKRVH37)HWF7KH2nd place holder
VSHFL¿HVWKHLQOHW¿WWLQJDQGRUDFFHVVRULHVVXFKDV+ R[\JHQZLWKDKDQGWLJKWQXW QLSSOHRQWKHLQOHW7KH3rd
SODFHKROGHUVSHFL¿HVRXWOHWFRQQHFWLRQDQGRUDFFHVVRULHV7KH4th place holder designates the length of hose in inches.
TYPE OF HOSE
END CONNECTION END CONNECTION
PTF PTFT PTFN PTF6 PTF36 & ACCESSORIES & ACCESSORIES LENGTH OF HOSE
3,000 PSI 3,000 PSI 3,000 PSI 6,000 PSI 3,600 PSI
STATED AS CGA & STATED AS CGA & STATED IN INCHES
OPTIONS PG. 65 OPTIONS PG. 65
PTFE TUBE ETFE TUBE NYLON TUBE PTFE TUBE Post Sintered PTFE
TUBE
Stainless Steel Stainless Steel Synthetic Stainless Steel Stainless Steel

BRAID BRAID BRAID DOUBLE BRAID DOUBLE BRAID
540 reverse
ÀRZ&9
540 handtight
nut 24”
FLOW
length in inchess
len
Final part # for example:
PTF-540H-540RCV-24

available hose options and features
Spring Guard is available for Superior’s PTF, PTFT, PTF36, Armor guard Is available for Superior’s PTF, PTFT, PTF36,
PTF6, and PTFN Series hoses. Spring Guard provides PTF6, and PTFN Series Stainless hoses. Armor Guard
SURWHFWLRQIURPNLQNLQJDQGDEUDVLRQRI\RXUÀH[LEOHKRVH provides protection from cutting, kinking, abrasion, or crushing
The crimped ends offer whip protection if the hose is severed. \RXUÀH[LEOHKRVH7KHFULPSHGHQGVRIIHUZKLSSURWHFWLRQLIWKH
hose is severed.
6SHFL¿FDWLRQ'HSHQGHQWRQWKHW\SHRIKRVHEHLQJXVHG 6SHFL¿FDWLRQV'HSHQGHQWRQWKHW\SHRIKRVHEHLQJXVHGVHH
(see available hoses on the previous page) available hoses on the previous page)
Spring Guard
Braided PTFSG
Armor Guard PTFG
Protection
Female NPT xxx

34I 1/4” FNPT Swivel SW
Male NPT xxx Male CGA H

34E Handtight
Female CGA’s xxx

540 Female CGA H
Handtight
Male CGA’s xxx Flash Arrestor FA

580
Check Valve Nipple O2 Adibiatic HS

CV FLOW
Heat Sink End
Reverse Flow Valves

Check Valve Nipple
RCV FLOW V
Elbow L
pigtail end options
Female NPT Male NPT
Brass 1/8” Female NPT = 32I Brass 1/8” Male NPT = 32E
Stainless Steel 1/4” Female NPT = 34ISS Stainless Steel 1/4” Male NPT = 34ESS
Female CGA Handtight
CGA 280 = 280 CGA 300 = 300H

CGA 300 = 300 CGA 326 = 326H
CGA 320 = 320 CGA 346 = 346H
CGA 326 = 326 CGA 347 = 347H*
CGA 330 = 330 CGA 350 = 350H**
CGA 346 = 346 CGA 520 = 520H
CGA 350 = 350** CGA 540 = 540H
CGA 577 = 577* CGA 555 = 555H
CGA 701 = 701* * Only on 6,000 PSI Hose (PTF6)
* Only on 6,000 PSI Hose (PTF6) ** Only with ETFE or Nylon Hose (PTFT/PTFN)
** Only with ETFE or Nylon Hose (PTFT/PTFN)
Male CGA Handtight
CGA 296 = 296 CGA 296 = 296H

CGA 500 = 500 CGA 500 = 500H
CGA 510 = 510 CGA 510 = 510H
CGA 580 = 580** CGA 580 = 580H**
CGA 590 = 590H
** For Helium Use, ETFE or Nylon hose is recommended (PTFT/PTFN)
* Only with 6,000 PSI (PTF6)
** For Helium Use, ETFE or Nylon hose is recommended (PTFT/PTFN)
Male CGA Valve Outlets Female CGA Valve Outlets

CGA 5
54
540 CGA 580
58
80
CGA 300 = 300M CGA 500 = 500F

CGA 320 = 320M CGA 510 = 510F
CGA 326 = 326M CGA 580 = 580F**
CGA 346 = 346M CGA 590 = 590F
CGA 347 = 347M* CGA 680 = 680F*
CGA 350 = 350M** * Only on 6,000 PSI Hose (PTF6)
CGA 540 = 540M ** For Helium Use, ETFE or Nylon hose is recommended (PTFT/
PTFN)
CGA 555 = 555M
CGA 577 = 577M*
CGA 701 = 701M*
* Only on 6,000 PSI Hose (PTF6)
** Only with ETFE or Nylon Hose (PTFT/PTFN)
$OO+DQGWLJKW1XWVDUHSODVWLFKDQGOHVZLWKEUDVVLQVHUW$OOEUDVV+DQGWLJKW1XWVDYDLODEOHRQVSHFLDOUHTXHVW

pigtail ordering matrix
1. Pick Your Hose Type 2. Guard Option 3. CGA or NPT Thread at Inlet
PTF, PTFT, PTFN, PTF6, PTF36 END CONNECTION STATED AS THE CGA
G = Armor Guard OF THE GAS YOU WISH TO USE IN THE
PTFE, ETFE, SYNTHETIC 6000 PSI, POST SINTERED 3600 SG=Spring Guard HOSE OR THE TYPE OF TANK
TUBE PTFE DOUBLE BRAID
Brass 1/4 Male NPT 34E

34ESS
Stainless Steel 1/4 Male NPT
Brass 1/4 Female NPT 34I
34ISS
Stainless Steel 1/4 Female NPT
PTFSG Brass 1/2 Female NPT 38I
44I
Brass 1/4 Female NPT, 3600 psi
EXAMPLE: FEMALE CGA
EXAMPLE: PTFSG-G341-G341-24 280
PTF-580H-580-36 300
320
326
PTFG 330
346
347
350**
EXAMPLE: 410
PTFT-34I-34I-36 Armor guard 415
minimum
length 24” 520
540
EXAMPLE: 555
PTFG-G341-G341-24 577*
660
701*
FEMALE CGA HT 300H
EXAMPLE: 320H
PTFN-N341-N341-24 326H
346H
347H*
350H**
520H
540H
555H
EXAMPLE: MALE CGA 296
PTF6-680-64ISS-36 500
510
580**
590
680*
MALE CGA HT 296H
500H
510H
EXAMPLE: 580H**
PTF36-34I-34I-24 590H
* Only on 6,000 PSI Hose (PTF6)

** Only with ETFE or Nylon Hose (PTFT/PTFN) CGA
pigtail ordering matrix
4. Options for either end 5. CGA or NPT thread at outlet 6. Length of hose (in inches)
ADDITIONAL OPTIONS OR END CONNECTION STATED AS THE CGA STANDARD LENGTHS SHOWN
ENHANCEMENTS OF THE GAS YOU WISH TO USE IN THE CUSTOM LENGTHS AVAILABLE TOO
S U C H A S C H E C K VA LV E S , HOSE OR THE TYPE OF TANK
VA LV E S , E L B O W S , S W I V E L ,
BRASS WRENCH, HEAT SINK Brass 1/4 Male NPT 34E Max - 50 ft (600”)
Stainless Steel 1/4 Male NPTE 34ESS Not cleaned for oxygen service past 20 ft.
CV FLOW
Stainless Steel 1/4 Female NPT 34ISS

Brass 3/8 Female NPT 36I Superior Product’s Online
Brass 1/4 Female NPT, 3600 psi 44I 3LJWDLO&RQ¿JXUDWRU
RCV FLOW
FEMALE CGA 280 One more way to order your custom pigtails
00 from www.superiorprod.com
320 &RQ¿JXUH\RXUFXVWRPSLJWDLOVE\VHOHFWLQJ
326
330 -Hose type
L 346 -Hose length
347
-Inlet connection
350**
410 ,QOHW¿WWLQJV
415 -Inlet thread material
520
540 -End options inlet
V
555 -Outlet connection
577* 6L]HRIRXWOHW¿WWLQJV
660
701* -Outlet thread material
FEMALE CGA HT 300H -End options outlet
320H
SW 326H
346H
347H*
350H**
520H
540H
555H
MALE CGA 296
500
PW 510
580**
590
680*
FA
MALE CGA HT 296H
MA
MAL
500H
(Acetylene only, 500 PSI) 510H
580H**
590H
HS

Semi-Automatic Changeover Fuel Gas & Manifold Accessories
ZERO CLEARANCE FITTINGS 1,000 PSI

=HURFOHDUDQFHIRUHDV\UHPRYDORISLSHGFRPSRQHQWV$OOWKUHDGVL]HVFDQEHPL[HGDQGPDWFKHG
/DUJHVWSRVVLEOHWKURXJKKROHVIRUPD[LPXPÀRZ
Flange Part No. Thread Nut Part No.
FL-ZC-04 1/4"-18NPT-M N-ZC-001 Nut for all zero

FL-ZC-06 3/8"-18NPT-M clearance sets
FL-ZC-08 1/2"-14NPT-M
FL-ZC-12 3/4"-14NPT-M
O-Ring Part No. *Boss includes O-Ring
Boss Part No. Thread OR-024B7 O-ring for all zero

clearance sets
N-ZC-04A 1/4"-18NPT-F
N-ZC-06A 3/8"-18NPT-F
N-ZC-08A 1/2"-14NPT-F
N-ZC-12A 3/4"-14NPT-F
FUEL GAS
SEMI-AUTOMATIC CHANGEOVER
DRY TYPE FLASH BACK GMA-SA HIGH PRESSURE SERIES

ARRESTORS GMA-FK series 'HVLJQHGWRUHJXODWHÀRZIURPKLJKSUHVVXUH
cylinders (up to 3,000 PSI), the GMA-SA series or
6XSHULRU
VÀDVKDUUHVWRUNLWSURYLGHVÀDVKEDFN
GMA-SAHP series provides an uninterrrupted gas
UHYHUVHÀRZDQGSUHVVXUHUHOLHISURWHFWLRQLQ
supply when changing from the "In Use" side to the
one compact device. This unit is included with a
"Reserve" side, Line delivery pressure remains
Superior Products acetylene manifold for more
constant to the pipeline during the changeover cycle.
than 2 cylinders. It is also available as an option
The SA series is perfect for fuel gas as it comes with
for use with hydrogen or propane manifolds. a NEMA 4 explosion proof cabinet. The SA series
LVHDV\WRRSHUDWH$OOWKDWLVUHTXLUHGDIWHUF\OLQGHU
change out is to move the lever to selected primary
gas supply bank for the manifold. The SA series is
a mechanical pressure differential system that does
QRWUHTXLUHSRZHUWRRSHUDWH9LVXDODQGDXGLEOH
1RZDWHURUÀXLGWRFKHFNRUUHSOHQLVK alarms are available if power at the site is available.
$SSURYHGVDIHW\GHYLFHXQGHU$16,=
+HOSPHHW26+$ 1)3$VDIHW\VWDQGDUGV UGV
%XLOWLQUHOLHIYDOYHPHHWV1)3$UHTXLUHPHQWV
Part No. Type Capacity Inlet/Outlet Relief Valve

GMA-FKA Acetylene 300 1/2” NPT 15 PSIG
GMA-FKP-40 Propane 300 1/2” NPT 40 PSIG
GMA-FKP-60 Propane 300 1/2” NPT 60 PSIG
GMA-FKH Hydrogen 300 1/2” NPT 40 PSIG How to Order
Control Type + Gas/CGA Service + Total # of Cylinders
Ex. GMA-SA or SAHP-580-4

Semi-Automatic changeover, inert service, 4 tanks
PROPORTIONAL GAS MIXERS
PRO-MIX GAS MIXERS
GMA-MX series Proportional Gas Mixer

6XSHULRU3URGXFW
V30;PL[HUVDUHVXLWHGIRUDOODSSOLFDWLRQVZKHUHSUHFLVHJDVPL[WXUHVDUHUHTXLUHG7KHVHQRQDGMXVWDEOH
KLJKPL[DFFXUDF\IXOOVFDOHRIF\OLQGHUSUHVVXUHRIIHUDSULFHDGYDQWDJHRYHUOHVVDFFXUDWHDGMXVWDEOHPRGHOV7KH
0;VHULHVUHTXLUHVNO SURGE TANK to maintain mixture accuracy. The panel is a small wall mounted unit that is easy
WRLQVWDOODQGUHTXLUHVQRHOHFWULFLW\RQJRLQJPDLQWHQDQFHRUDGMXVWPHQW
Features 0L[HU6SHFL¿FDWLRQV *0$0;series

Tamper proof
+LJKO\DFFXUDWH Inlet pressure range 110-150 PSIG
/RZVWDUWXSFRVW Outlet pressure 0-100 PSIG adjustable
Compact
Flow rate 300 SCFH or 900 SCFH
1RVXUJHWDQNUHTXLUHG(MX2000)
Mixture accuracy ± 2% (3 to 900 SCFH)
,QOHW¿OWHUV 50 Micron
Dimensions 8”W x 10”H x 4.5”D
Weight 8 lbs.
How to Order
Mixers available for the Gas Mixer Assembly - CGA - % - CGA - %
following Gases: GMA-MX - XXX - % - XXX - %
GMA-MX900 - XXX - % - XXX - %
GMA-MX2000 - XXX - % - XXX - %
Argon 580A
Nitrogen 580N Example: GMA-MX2000-580A-75-320-25 Mixer for Argon-75% & CO2-25%
Helium 580H
CO2 320
Oxygen 540 * +LJKHUÀRZUDWHVDYDLODEOHXSRQUHTXHVW
Hydrogen 350 increase in 300 SCFH increments up to 2000 SCFH
* 7KUHHJDVPL[HUVDYDLODEOHXSRQUHTXHVW
GMA-MX2000 series Proportional Gas Mixer /High Capacity
0L[HU6SHFL¿FDWLRQV *0$0;series
Features
Tamper proof Inlet pressure range 120 PSIG
+LJKO\DFFXUDWH Outlet pressure 0-100 PSIG adjustable
/RZVWDUWXSFRVW Flow rate 2000 SCFH
Compact Mixture accuracy ± 2% (2 to 2000 SCFH)
1RVXUJHWDQNUHTXLUHG ,QOHW¿OWHUV 50 Micron
Dimensions 20”W x 22”H x 6”D
,QOHW 2XWOHW¿WWLQJV 1/4" NPFT

CRADLE PACK MANIFOLDS FOR 6, 12 & 16 CYLINDER
SCMB Series
6XSHULRU¶V 6&0% VHULHV LV WKH LGHDO ORZ FRVW UHSODFHPHQW KHDGHU WR ¿W PRVW FRPPHUFLDOO\ DYDLODEOH
cylinder cradles. The body is machined from 1 1/2” yellow brass bar stock. Includes proper CGA valves
RU539YDOYHV DQG´ÀH[LEOHVWDLQOHVVVWHHOSLJWDLOV37)(OLQHGIRUVWDQGDUGJDVVHUYLFHRU(7)(OLQHG
for high purity and lighter than air gases (hydrogen and helium) or 3,600 PSI Post Sintered PTFE. Also
DYDLODEOHZLWKDUPRUJXDUGHGÀH[SLJWDLOVIRUKHDY\GXW\VHUYLFH7KHPRGXODUGHVLJQDQGUHPRYDEOH
ÀH[LEOHSLJWDLOVDOORZIRUTXLFNHDV\UHSDLUV
Available
Available to order
to order
6 pack, stainless steel PTFE lined pigtails GMA-SCMB-XXX-06
6 pack, stainless steel ETFE lined pigtails GMA-SCMB-XXXTZ-06
6 pack, single loop copper pigtails GMA-SCMB-XXX-06-RGD
6 pack, stainless steel 3,600 PSIG PTFE Lined Pigtail GMA-SCMB-XXX-36-06


* For ArmorGuard Option add “AG” to part number Available for the following gases,
Example: GMA-SCMB-XXXAG-06-PTFE replace XXX in part number with CGA#
*0$6&0%;;;7=$*(7)(
GMA-SCMB-XXX36AG-06-PTFE 3,600 PSI Carbon Dioxide CGA 320
Nitrous Oxide CGA 326
* For Residual Pressure Valve add “RPV” to part number Air CGA 346
Example: GMA-SCMB-XXXRPV-06 Hydrogen CGA 350
Please Note 3,600 PSIG PTFE is Post Sintered
Propane/Acetylene CGA 510
Oxygen CGA 540
2WKHU&*$¶VDYDLODEOHXSRQUHTXHVW
2SWLRQDO7HHZLWKJDXJHDYDLODEOHEHWZHHQYDOYHDQGEORFN Inert Gases CGA 580
CRADLE PACK MANIFOLDS FOR 6, 12 & 16 CYLINDER
CPR Series
6XSHULRU¶V&35VHULHVLVDFUDGOHSDFNUHSODFHPHQWKHDGHUWR¿WPRVWFRPPRQVL]HF\OLQGHUFUDGOHV
The body is machined from 1 1/2” yellow brass bar stock. Includes proper CGA valves or RPV valves,
´ÀH[LEOHVWDLQOHVVVWHHOSLJWDLOV37)(OLQHGIRUVWDQGDUGJDVVHUYLFH(7)(OLQHGIRUKLJKSXULW\DQG
lighter than air gases (hydrogen and helium) or 3,600 PSIG Post Sintered PTFE. Also available with
DUPRUJXDUGHGÀH[LEOHSLJWDLOVIRUKHDY\GXW\VHUYLFH7KHPRGXODUGHVLJQDQGUHPRYDEOHÀH[LEOHSLJWDLOV
DOORZIRUTXLFNHDV\UHSDLUV
Available
Availabletotoorder
order
6 pack, stainless steel PTFE lined pigtails GMA-CPR-XXX-06
6 pack, stainless steel ETFE lined pigtails GMA-CPR-XXXTZ-06
6 pack, stainless steel 3,600 PSIG PTFE lined pigtails GMA-CPR-XXX-36-06
6 pack, single loop copper pigtails GMA-CPR-XXX-06-RGD


* For ArmorGuard Option add “AG” to part number

Available for the following gases,
Example: GMA-CPR-XXXAG-06-PTFE
replace XXX in part number with CGA
*0$&35;;;7=$*(7)(
GMA-CPR-XXX36AG-06-PTFE 3,600 PSI
Carbon Dioxide CGA 320
Nitrous Oxide CGA 326
* For Residual Pressure Valve add “RPV” to part number
Air CGA 346
Example: GMA-CPR-XXXRPV-06
Hydrogen CGA 350
Propane/Acetylene CGA 510
*Please Note 3,600 PSIG PTFE is Post Sintered
Oxygen CGA 540
2WKHU&*$¶VDYDLODEOHXSRQUHTXHVW Inert Gases CGA 580

HEADERS & OPEN STYLE MANIFOLDS
MODULAR NON-BRAZED SIMPLEX HEADERS
FOR INDUSTRIAL, SPECIALTY GAS & HOSPITAL MANIFOLD SYSTEMS
Modular simplex manifold headers are a single unit design manufactured from free cutting brass bar stock. This design
eliminates all brazed joints. Each unit is tested to full operating pressure and cleaned for oxygen service per CGA-G4.1.
0DQLIROGKHDGHUVFDQEHVKLSSHGFRPSOHWHZLWKPDVWHUYDOYHLQGLYLGXDOFKHFNYDOYHLQOHWVÀH[LEOHVWDLQOHVVVWHHORU
rigid copper pigtails, mounting hardware, and CGA inlet connections. Systems available include simplex, MHV series
ZLWKÀH[LEOHVWDLQOHVVSLJWDLOV&0+9ZLWKULJLGFRSSHUSLJWDLOV0+(DQG&0+(VHULHVKHDGHUH[WHQVLRQV+HDGHUVDUH
RUGHUHGLQRUF\OLQGHUFRQ¿JXUDWLRQVWRDUULYHDWWKHGHVLUHGQXPEHURIF\OLQGHUV&XVWRPFRQ¿JXUDWLRQVDUHDOVR
DYDLODEOHIRU8VKDSHGDQG/VKDSHGWRPHHW\RXUVSDFHUHTXLUHPHQWV+HDGHUVDUHDYDLODEOHZLWKDQRSWLRQDOPDQLIROG
regulator. To order, add an R to the type of manifold ex. GMA-MHVR-540-02.
&RQ¿JXUDWLRQ6\VWHPVDUHDYDLODEOHLQWKUHHGLIIHUHQWEDVLFFRQ¿JXUDWLRQVIRURUF\OLQGHUVHFWLRQV)LYHLQFKFHQWHUWRFHQWHU
spacing is standard. To order 90 degree elbow sections separately, specify GMF-3710. See page 70.
HOW TO ORDER
11. Start with Blank Header Machined.
Not brazed joints.
Machined.
Not brazed joints. 1 - 111/2 NPS Thread
3/8 NPT for expansion
3/8 NPT
both sides
GMA2 GMA4
(2 port) (4 port - Crossover)
GMA3
(3 port) GMA6
(6 port - Crossover)
over)
22. Choose Inlet

MHV = Master Header Valve
MHE = Master Header Extension
33. Choose Gas Male Outlets Female Outlets

CGA 300 - Ethyl Chlorides (formerly Acetylene) CGA 500 - Medical Mixtures
CGA 320 - Carbon Dioxide CGA 510 - Acetylene
CGA 326 - Nitrous Oxide CGA 580 - Inert Gases
CGA 346 - Air CGA 590 - Sulfur HexaFlouride (formerly Industrial Air)
CGA 350 - Hydrogen
CGA 540 - Oxygen
CGA 555 - Propane
* Pigtails sold separately
For check valve outlets add “CV” after CGA number
CGA 577 - Oxygen
2 1 3
CONFIGURED
MANIFOLD
EXAMPLE 1 2 3
*0$MHE&9
3 Cylinder CGA 540 with Header Extension and check valve outlets
GAS MANIFOLD ASSEMBLIES

ORDERING INFORMATION:
(DFKPDQLIROGSDUWQXPEHUFRQVLVWVRIIRXUVHFWLRQV7KH¿UVWVHFWLRQGHQRWHVD*DV0DQLIROG$VVHPEO\*0$7KH
VHFRQGVHFWLRQGHQRWHVWKHW\SHRIPDQLIROGDQGLWVFRQ¿JXUDWLRQRQO\IRUGXSOH[PDQLIROGVRWKHUZLVHGRQRWXVH
FRQ¿JXUDWLRQQXPEHU7KHWKLUGVHFWLRQGHQRWHVWKH&*$QXPEHURUW\SHRIJDVDQGWKHODVWVHFWLRQGHQRWHVWKH
number of outlets or cylinders. The example below is for a twelve cylinder Oxygen duplex manifold in a standard
FRQ¿JXUDWLRQZLWKRXWOHWDGDSWRUZLWKFKHFNYDOYHVLQVWHDGRIKHDGHUYDOYHV
GMA - DM - 540CV - 12
*DV0DQLIROG$VVHPEO\ 7\SHRI0DQLIROG &RQ¿JXUDWLRQ&*$1XPEHU 1XPEHURI&\OLQGHU2XWOHWV
Type of Manifold Type of&RQ¿JXUDWLRQType of Gases

6'6LPSOH'XSOH[0DQXDO 6WDQGDUG&RQ¿JXUDWLRQ &RPPHUFLDO$FHW\OHQH$FHW\OHQH 3URSDQH
606LPSOH[0DQXDO &URVVRYHU&RQ¿JXUDWLRQ &DUERQ'LR[LGH 2[\JHQ
'0'XSOH[0DQXDO /6KDSHG&RQ¿JXUDWLRQ 1LWURXV2[LGH 1LWURJHQ+HOLXP $UJRQ
+(/+HDGHU([WHQVLRQOHIWVLGH 86KDSHG&RQ¿JXUDWLRQ $LU ,QGXVWULDO$LU
+(5+HDGHU([WHQVLRQULJKWVLGH 6WDJJHUHG&RQ¿JXUDWLRQ +\GURJHQ
SIMPLE DUPLEX MANIFOLDS

The simple duplex manifold is an economical system with a two
cylinder capacity, one per side. The unit is furnished with two GMA-SD-320-02
GMA-S
header valves and two pigtails with check valves or two outlet
adaptors with check valves and two regular pigtails, 1/2" NPT
tee, a union and a mounting bracket. Manifolds for Acetylene
JDVZLOOLQFOXGHSLJWDLOVZLWKGU\W\SHÀDVKEDFNDUUHVWRUV
SIMPLEX MANIFOLDS WITH MANUAL CONTROLS

The simplex manifold has a master shut off valve with a single
row of cylinder modules. Each module consists of 1/2" piping,
1/2" tees, header valves and pigtails with check valves or outlet
adaptors with check valve and regular pigtails, a union, a CGA GMA-SM-346-02
end plug and mounting brackets. The last module willll have a
plug and chain connected to an adaptor that allows for or future
fo
H[SDQVLRQ3URSHU&*$¿WWLQJVZLOOEHIXUQLVKHGIRUWKHVSHFL¿HG
VSHFL¿HG
gas. Manifolds for Acetylene gas will include a Hydraulic
ulic Flash
Arrestor and pigtails with dry type arrestors.
MANIFOLD HEADER EXTENSION ASSEMBLIES

Header extensions are shipped ready for addition to
existing manifolds. Unit includes CGA inlet, CGA end
plug, 1/2" piping, 1/2" tees, header valves and pigtails
with check valves or outlet adaptors with check valves and GMA-HER-540-02
ÀH[LEOHSLJWDLOVDQGDPRXQWLQJEUDFNHW7KHODVWPRGXOH
will have a plug and chain connected to an adaptor that
allows for future expansion. Specify right side extension
(HER) or left side extension (HEL).

DUPLEX MANIFOLDS WITH MANUAL CONTROLS

The duplex manifold has two master shut off valves allowing replacement of the exhausted bank of cylinders while the full
bank of cylinders is in operation. The center section accommodates a single regulator. The manifold is shipped with 1/2"
piping, 1/2" tees, header valves and pigtails with check valves or adaptor outlets with check valve and regular pigtails,
a union, a CGA end plug and mounting brackets are included with each module. Modules are furnished with a plug and
FKDLQRQWKHODVWPRGXOHWKDWDOORZVIRUIXWXUHH[SDQVLRQ3URSHU&*$¿WWLQJVZLOOEHIXUQLVKHGIRUVSHFL¿HGJDV0DQLIROGV
for Acetylene gas will include a Hydraulic Flash Arrestor and pigtails with dry type arrestors.
GMA-DM-580-04
BRASS MANIFOLD PIPE AND PIPE FITTINGS

Fittings Are Machined From CDA-360 Brass, Stress Relieved and Cleaned For Oxygen Service
PIPE ELBOWS 3,000 PSI PIPE CROSSES 3,000 PSI
GMF-301
GMF-3011 GMF-3012 GMF-3013
GMF-3041 GMF-3043
G
GMF-3042
Part No. Ref. A Ref. B Ref. F Ref.G rt No

Part No. Ref
Ref. A Ref. B Ref.C & D Ref.E
GMF-3011 1/2"-14 NPT 1/2"-14 NPT 1-5/16" 3/4" GMF-3041 1/2"-14 NPT 1/2"-14 NPT 1/2"-14 NPT 1-1/2"
GMF-3012 1/2"-14 NPT .843"-.847" 1-5/16" 3/4" GMF-3042 .843"-.847" 1/2"-14 NPT 1/2"-14 NPT 1-1/2"
GMF-3013 .843"-.847" .843"-.847" 1-5/16" 3/4" GMF-3043 .843"-.847" Slip Thru 1/2"-14 NPT 1-1/2"
PIPE TEES 3,000 PSI
GMF-3021 GMF-3022 GMF-3023 GMF-3033 GMF-3034
Part No. Ref. A Ref. B Ref. C Ref.E Part No. Ref. A Ref. B Ref. C Ref. E
GMF-3021 1/2"-14 NPT 1/2"-14 NPT 1/2"-14 NPT 1-1/2" GMF-3033 .843"-.847" Slip Thru 1/2"-14 NPT 1-1/2"
GMF-3022 1/2"-14 NPT 1/2"-14 NPT .843"-.847" 1-1/2" GMF-3034 .843"-.847" Slip Thru .843"-.847" 1-1/2"
GMF-3023 .843"-.847" 1/2"-14 NPT 1/2"-14 NPT 1-1/2"
MANIFOLD FITTINGS & PIPING
3,000 PSI
PIPE NIPPLES, THREADED ENDS PIPE LENGTHS, PLAIN ENDS
-Cleaned For Oxygen Service -Cleaned For Oxygen Service
-Suitable For Acetylene -Suitable For Acetylene
-Machined From CDA 360 Brass -Made From CDA 360 Brass
GMF-3214
GMF 3214 -Special Lengths Available
Part No. Thread Size Length 8SRQ5HTXHVW GMF-3224
GMF-3211 1/2"-14 NPT 1-1/2" Part No. Pipe Size Length

GMF-3212 1/2"-14 NPT 2"
GMF-3213 1/2"-14 NPT 4" GMF-3222 1/2" Nom. 2"
GMF-3214 1/2"-14 NPT 6" GMF-3223 1/2" Nom. 4"
GMF-3215 1/2"-14 NPT 9-3/4" GMF-3224 1/2" Nom. 6"
GMF-3216 1/2"-14 NPT 12-3/4" GMF-3225 1/2" Nom. 9-3/4"
GMF-3226 1/2" Nom. 12-3/4"
UNION 900 PIPE LENGTHS, PLAIN ENDS

-127&/($1(' For Oxygen Service
-Suitable For Acetylene
-Made From CDA 360 Brass
GMF 3710
GMF-3710
UNION PLUG P Part No. Pipe Size Length
GMF-3236 1/2" Nom. 6 FT.
GMF-3237 1/2" Nom. 12 FT.
Part No. Thread
NOTE: GMF-3237 Must ship via Common Carrier
GMA-RH-PLUG 1"-11-1/2 NPS RH-INT.
GMA-LH-PLUG 1"-11-1/2 NPS LH-INT.
UNION NUTS UNION NIPPLES

GMF-3326
Part No. Thread
GMF-3311 1"-11-1/2 NPS RH-INT.
GMF-3312 1"-11-1/2 NPS LH-INT. Part No. Thread Length
GMF-3311 GMF-3321 3/8"-18 NPT 2.40"

GMF-3326 1/2"-14 NPT 2.94"
UNION BUSHINGS
GMF-3333
GMF-33
3 GMF-3332
G
GM
UNION BUSHINGS WITH FILTER 3,000 PSI UNION BUSHINGS WITHOUT FILTER 3,000 PSI
Part No. Thread Pipe Thread Length Part No. Thread Pipe Thread Length
GMF-3333 1"-11-1/2 NPS RH 3/8"-18 NPT 3.125" GMF-3331 1"-11-1/2 NPS RH 3/8"-18 NPT 3.125"
GMF-3334 1"-11-1/2 NPS RH 1/2"-14 NPT 2.187" GMF-3332 1"-11-1/2 NPS RH 1/2"-14 NPT 2.187"
GMF-3337 1"-11-1/2 NPS LH 3/8"-18 NPT 3.125" GMF-3335 1"-11-1/2 NPS LH 3/8"-18 NPT 3.125"
GMF-3338 1"-11-1/2 NPS LH 1/2"-14 NPT 2.187" GMF-3336 1"-11-1/2 NPS LH 1/2"-14 NPT 2.187"
GMF-3341 Replacement Filter
GMF-3342 Replacement Snap-Ring

LINE STATION DROPS, LINE STATION VALVES & BALL VALVES
LINE STATION DROPS & LINE STATION VALVES

200 PSI
Part No. Gas Service No. Of Outlets Outlet Size
GMA-SSD-022V-01 Oxygen Single 9/16"-18 RH "B" size valve

GMA-SSD-022V-02 Oxygen Double 9/16"-18 RH "B" size valve
GMA-SSD-023V-01 Fuel Gas Single 9/16"-18 LH "B" size valve
GMA-SSD-023V-02 Fuel Gas Double 9/16"-18 LH "B" size valve
GMA-SSD-024V-01 Oxygen Single 7/8"-14 RH "C" size valve
GMA-SSD-024V-02 Oxygen Double 7/8"-14 RH "C" size valve
GMA-SSD-025V-01 Fuel Gas Single 7/8"-14 LH "C" size valve
GMA-SSD-025V-02 Fuel Gas Double 7/8"-14 LH "C" size valve
Part No. Operating CGA Valve Inlet

Pressure Outlet
GMV-1024 200 psi CGA-024 1/2"-14 NGT

GMV-1025 200 psi CGA-025 1/2"-14 NGT
GMV-1024 GMV-1025
Inlet & Outlet size Part No.
1/4” female NPT GMV-334

BALL
VALVES
Brass body, hot forged brass ball valve, 600 psi rated MANIFOLD VALVES
M
Safe for use with acetylene
* = Residual Pressure Valve

MASTER SHUT-OFF VALVES 3,000 PSI No Safety Relief Devices
GMV-1580 GMV-1540
Part No. Operating CGA Valve Inlet

-Forged Brass Body Pressure Outlet
-PTFE Packing
-Kel-F Seat GMV-1001 GMV-1300 250 psi CGA-300 1/2"-14 NGT
GMV-1320 3,000 psi CGA-320 1/2"-14 NGT
GMV-1326 3,000 psi CGA-326 1/2"-14 NGT
GMV-1346 3,000 psi CGA-346 1/2"-14 NGT
GMV-1350 3,000 psi CGA-350 1/2"-14 NGT
GMV-1510 250/500 psi CGA-510 1/2"-14 NGT
GMV-1540 3,000 psi CGA-540 1/2"-14 NGT
GMV-1580 3,000 psi CGA-580 1/2"-14 NGT
GMV-1590 3,000 psi CGA-590 1/2”-14 NGT
GMV-1341 GMV-3346 3,000 psi CGA-346 3/4”-14 NGT
GMV-3350 3,000 psi CGA-350 3/4”-14 NGT
GMV-3540 3,000 psi CGA-540 3/4”-14 NGT
GMV-3540RPV* 3,000 psi CGA-540 3/4”-14 NGT
GMV-3580 3,000 psi CGA-580 3/4”-14 NGT
GMV-3580RPV* 3,000 psi CGA-580 3/4”-14 NGT
GMV-3660SS 3,000 psi CGA-660 3/4”-14 NGT
Part No. Inlet Outlet GMV-3680 4,700 psi CGA-680 3/4”-14 NGT
GMV-3702 6,400 psi CGA-702 3/4”-14 NGT
GMV-1001 1/2"-14 NPT 1/2"-14 NPT
GMV-1341 1"-11-1/2 NPS RH-EXT 1"-11-1/2 NPS RH-INT. * Residual Pressure Valve
SS = Stainless Steel
warranty
LIMITED WARRANTY
WARRANTY: Your claim should be in typed or printed form and include the following information:
1. Your name and address; and
The manufacturer warrants the products sold hereunder to be free 2. The name and address of the seller of the parts; and
from defects in material and workmanship at the date of shipment. 3. The date of purchase of the parts; and
Please note the distinction between “defects” and “damage” as used 4. A short description of the alleged defect; and
5. Proof of the purchase of the parts, for example, a receipt or canceled check.
in this warranty: defects are covered because we, the manufacturer,
are responsible: however, we have no control over damage caused WHAT IS NOT COVERED UNDER THIS WARRANTY (LIMITATION OF LIABILITY):
by such things as misuse or improper installation. Therefore, damage As stated above, damage for any reason is not covered under this warranty. Furthermore NO OTHER WARRANTY,
WHETHER EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS
for any reason is not covered under this warranty. FOR A PARTICULAR PURPOSE, SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF OUR
PRODUCTS. However, some states do not allow limitations on how an implied warranty lasts, so this limitation
WHAT THE MANUFACTURER WILL DO: may not apply to you. Also, since this is a limited warranty, WE SHALL NOT, UNDER ANY CIRCUMSTANCES, BE
LIABLE FOR ANY OTHER CHARGES, LABOR COSTS, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL
,I\RXWKH%X\HUPHHWWKHHOLJLELOLW\UHTXLUHPHQWVDQGREOLJDWLRQV LOSSES OR DAMAGES OF ANY KIND OR DESCRIPTION WHATSOEVER ARISING OUT OF, OR IN ANYWAY
listed below, then we shall, within thirty (30) days of receipt of a RELATING TO, ANY BREACH OF THIS WARRANTY OR CLAIMED DEFECT IN, OR NON-PERFORMANCE OF,
timely claim and the parts claimed to be defective, inspect the OUR PRODUCTS. +RZHYHUVRPHVWDWHVGRQRWDOORZWKHH[FOXVLRQRUOLPLWDWLRQRILQFLGHQWDORUFRQVHTXHQWLDO
damages, so this limitation or exclusion may not apply to you. This warranty also excludes commercial and
parts and repair or replace, at our option, any parts other non-consumer purchasers other than the original consumer purchaser.
which we determine were defective at the time of shipment from us.
However, if we determine that the parts were defective and WE HAVE NO AGENTS:
also that circumstances are such as to prevent us from remedying the We do not authorize any person to create for us any obligation of liability in connection with our products.
warranted defects by repair or replacement, then we may at our
option, refund you the purchase price of the parts. LEGAL RIGHTS:
7KLVZDUUDQW\JLYHV\RXVSHFL¿FOHJDOULJKWVDQG\RXPD\DOVRKDYHRWKHUULJKWVZKLFKYDU\IURPVWDWHWRVWDWH
(province to province in Canada).
ELIGIBILITY REQUIREMENTS & OBLIGATIONS OF BUYER:
You are eligible to obtain service under this warranty if you are the
original consumer purchaser, either from us directly or from a seller
who stocks our product for resale. However, in order for you to Your claim, along with the sample part or parts, should be sent to:
obtain service under this warranty, you must do the following:
1. Send a claim in writing along with samples of the parts
claimed to be defective to us freight prepaid. Superior Products, LLC.
2. Have your claim and sample parts delivered within ninety (90) 3786 Ridge Road
days from the date of shipment of the parts from our factory. Cleveland, Ohio 44144-1175
However, if you bought the parts for resale, or if you bought
the parts from someone who bought them for resale, then you
ATTN: QCA DEPT.
must deliver the claim and the parts to us within ninety (90)
days from the date of re sale–except under no circumstances
shall we honor any claim which fails to be delivered to us with the parts
within one hundred and eighty (180) day from the date of Retail Price $8.00
shipment of the parts from our factory.
Superior
Products, LLC
Call for more information or to place an order ZZZVXSHULRUSURGFRP V

VISIT WWW.SUPERIORPROD.COM
TO LEARN MORE ABOUT OUR OTHER PRODUCT LINES
Medical Gas Fittings and Accessories
&\OLQGHU)LWWLQJV5HJXODWRU 3LJWDLOV
'HPDQG9DOYHV 1373LSH)LWWLQJV
',66)LWWLQJV 9DOYHV
4XLFN&RQQHFWRUV <&RQQHFWRUV
((DISS, Ohmeda, Chemetron, Puritan, Oxequip) <RNHV
'XSOH[RU&RXSOHUV
)ORZPHWHUV
*DXJHV
+RVHV
+RVH)LWWLQJVDQG$FFHVVRULHVL
Macro Technologies LNG Fueling Systems

CryoMac2TM LNG Fueling Nozzles Tank receptacle
Cryogenic hoses for LNG Fueling Receptacle cap
Quick disconnect vent couplers
Breakaway couplings
ZZZPDFURWHFKQRORJLHVFRP

3786 Ridge Rd. | Cleveland, OH | 44144 | Ph. 800-651-9490 | Fx. 216-651-4071
Catalog 18 - 2/17/2014

Superior Products,: Catalog #18

Uploaded by

Copyright:

Available Formats

Superior Products,: Catalog #18

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Superior Products,: Catalog #18

Uploaded by

Copyright:

Available Formats

Superior

Brass & Stainless Steel

Manifolds & Gas Management Systems

Industrial Hospital Specialty Engineering

general information/ordering information .......................................................................................................1-5

DLUZDWHU¿WWLQJV .................................18, 19 manifold assemblies ............................................. 69-70

Adaptor Flash Arrestors Pigtail Assemblies

Bushings Manifolds Plugs

Call for more information or to place an order ZZZVXSHULRUSURGFRP 3

NEW FROM SUPERIOR PRODUCTS FEATURED IN THIS CATALOG !

NEW PRODUCTS PAGE #

Hose Repair Kits w/o Tools 16

Three Hole Vise Grip Tools 16

DIN Fittings 21, 22

Stainless Steel Check Valve Nipples 27-40

RPV Valve Nipples 27-39

CGA 622 & 624 Nut & Nipple 40

CGA 622 & 624 Valve Outlet Adaptors 51

CGA 320-580 One Piece Adaptor 52

CGA 622-320 Adaptor 40

3600 PSI Post Sintered PTFE Hose 61

1/4” FNPT Swivel end Pigtails 60

One Piece Modular Brass Headers 68

90o Manifold Header Union 71

CGA TABLE OF CONTENTS BY GAS & CGA #

Call for more information or to place an order ZZZVXSHULRUSURGFRP 5

Maximum Pressure 200 PSI

Barb Round Center Stop 3/16” I.D. S-333

Maximum Pressure 200 PSI

Female NPT Thread Thread 1/8” FNPT 1/8” I.D. A-151

Hose Barb Adaptors 200 PSI

Oxygen“B” 9/16”-18-RH-EXT 3/16” I.D. A-50

Hose Adaptors 200 PSI

Swivel Nut Adaptors 200 PSI

1/4” MNPT “B” 9/16”-18-RH-INT A-192

1/4” MNPT “B” 9/16”-18-LH-INT A-193

Call for more information or to place an order ZZZVXSHULRUSURGFRP 7

Maximum Pressure 200 PSI

External Hose Nut to Swivel Nut Pipe Thread to Swivel Nut

Fuel Gas Fuel Gas

Female Pipe Thread Female NPT

FNPT EXT Hose

FNPT INT Hose “B”

1/4” FNPT “B” 9/16”-18-LH-INT A-229

90° External Hose Coupler to 90° External Pipe to External

Fuel Gas Fuel Gas

Call for more information or to place an order ZZZVXSHULRUSURGFRP 9

Torch Type Check Valve Inlet Flow Outlet Part No.

Fuel Gas “A” 3/8”-24-LH-EXT > “A” 3/8”-24-LH-INT CV-11L

B-Size One Piece Torch Type 200 PSI

Fuel “B” 9/16”-18-LH-EXT > “B” 9/16”-18-LH-INT CV-21L

Fuel Gas“B” 9/16”-LH-INT > “B” 9/16”-18-LH-EXT CV-129L

1/4” MNPT > “B” 9/16”-18-RH-EXT CV-28R

Low Pressure Inline Check Valves 200 PSI

1/4” MNPT > 1/4” MNPT CV-24

1/4” MNPT > 1/4” FNPT CV-25

High Pressure Inline Check Valves 3000 PSI

1/4” MNPT > 1/4” FNPT CV-219

1/4” FNPT > 1/4” FNPT CV-229

DLUZDWHU¿WWLQJV .................................18, 19 manifold assemblies ............................................. 69-70

Call for more information or to place an order ZZZVXSHULRUSURGFRP 3

Call for more information or to place an order ZZZVXSHULRUSURGFRP 5

Call for more information or to place an order ZZZVXSHULRUSURGFRP 7

Call for more information or to place an order ZZZVXSHULRUSURGFRP 9

Call for more information or to place an order ZZZVXSHULRUSURGFRP 11

Call for more information or to place an order ZZZVXSHULRUSURGFRP 13

Call for more information or to place an order ZZZVXSHULRUSURGFRP 15

³%´KRVH¿WWLQJVZLWK.7&ULPSLQJ7RRO&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´ ´,'KRVH RK-28

³%´KRVH¿WWLQJVRQO\&RQWDLQVQXWVQLSSOHVFRXSOHUVVSOLFHUVDQGIHUUXOHVIRU´ ´,'KRVH RK-28LT

Call for more information or to place an order ZZZVXSHULRUSURGFRP 17

Call for more information or to place an order ZZZVXSHULRUSURGFRP 19

Call for more information or to place an order ZZZVXSHULRUSURGFRP 21

Call for more information or to place an order ZZZVXSHULRUSURGFRP 23