Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 8 views

    OK Tigrod 316L

    Uploaded by

    axisd47
    This document summarizes information about OK Tigrod 316L stainless steel MIG welding wires and TIG rods. It describes the alloy as austenitic with approximately 10% ferrite, 19% chromium, 12% nickel, and 3% molybdenum. The alloy has good general corrosion resistance, especially against acids and chlorine, and is widely used in chemical processing and other industries due to its low carbon content reducing risk of intergranular corrosion. Specifications, approvals, mechanical properties, composition, and other details are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    OK Tigrod 316L

    Uploaded by

    axisd47
    8 views1 page
    This document summarizes information about OK Tigrod 316L stainless steel MIG welding wires and TIG rods. It describes the alloy as austenitic with approximately 10% ferrite, 19% chromium, 12% nickel, and 3% molybdenum. The alloy has good general corrosion resistance, especially against acids and chlorine, and is widely used in chemical processing and other industries due to its low carbon content reducing risk of intergranular corrosion. Specifications, approvals, mechanical properties, composition, and other details are provided.

    Original Description:

    Original Title

    OK_Tigrod_316L

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes information about OK Tigrod 316L stainless steel MIG welding wires and TIG rods. It describes the alloy as austenitic with approximately 10% ferrite, 19% chromium, 12% nickel, and 3% molybdenum. The alloy has good general corrosion resistance, especially against acids and chlorine, and is widely used in chemical processing and other industries due to its low carbon content reducing risk of intergranular corrosion. Specifications, approvals, mechanical properties, composition, and other details are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    8 views1 page

    OK Tigrod 316L

    Uploaded by

    axisd47
    This document summarizes information about OK Tigrod 316L stainless steel MIG welding wires and TIG rods. It describes the alloy as austenitic with approximately 10% ferrite, 19% chromium, 12% nickel, and 3% molybdenum. The alloy has good general corrosion resistance, especially against acids and chlorine, and is widely used in chemical processing and other industries due to its low carbon content reducing risk of intergranular corrosion. Specifications, approvals, mechanical properties, composition, and other details are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    STAINLESS STEEL

    MIG WIRES / TIG RODS (GMAW/GTAW)

    OK Tigrod 316L
    Bare corrosion resisting chromium-nickel-molybdenium welding rods for welding of austenitic stainless alloys of 18% Cr - 8% Ni and 18% Cr - 10% Ni - 3% Mo-
    types. OK Tigrod 316L has a good general corrosion resistance, particularly against corrosion in acid and chlorinated environments. The alloy has a low carbon
    content which makes it particularly recommended were there is a risk of intergranular corrosion. The alloy is widely used in the chemical and food processing
    industries as well as in ship building and various types of architectual structures.

    Specifications
    Classifications EN ISO 14343-A : W 19 12 3 L
    SFA/AWS A5.9 : ER316L
    Werkstoffnummer : ~1.4430
    Approvals ABS : 1.6-3.2mm
    BV : 1.6-3.2mm
    CE : EN 13479
    CWB : 1.0-4.0mm
    DNV-GL : 1.0-4.0mm
    NAKS/HAKC : 1.6 - 3.2 mm
    UKCA : EN 13479
    VdTÜV : 1.0-4.0mm

    Alloy Type Austenitic (with approx. 10 % ferrite) 19% Cr - 12% Ni - 3% Mo - Low C

    Typical Tensile Properties


    Condition Yield Strength Tensile Strength Elongation
    As Welded 470 MPa ( 68 ksi ) 600 MPa ( 87 ksi ) 32 %

    Typical Charpy V-Notch Properties


    Testing Temperature Impact Value
    20 °C ( 68 °F ) 175 J ( 129 ft-lb )
    -60 °C ( -76 °F ) 130 J ( 96 ft-lb )
    -110 °C ( -166 °F ) 120 J ( 88.5 ft-lb )
    -196 °C ( -321 °F ) 75 J ( 55 ft-lb )

    Typical Wire Composition %


    C Mn Si Ni Cr Mo N FN WRC-92
    0.01 1.7 0.4 12.0 18.2 2.6 0.04 7

    Typical Weld Metal Analysis %


    C Mn Si S P Ni Cr Mo Cu
    0.01 1.8 0.4 0.01 0.02 12 19 2.6 0.1

    esab.com/fillermetals

    You might also like