Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 4 views

    en - US FactSheet - Main 01

    Uploaded by

    Ganesh Hile

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    en - US FactSheet - Main 01

    Uploaded by

    Ganesh Hile
    4 views1 page

    Original Title

    10886-en_US-FactSheet_Main-01

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    4 views1 page

    en - US FactSheet - Main 01

    Uploaded by

    Ganesh Hile

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    MIG/MAG WIRES (GMAW)

    STAINLESS STEEL WIRES

    OK Autrod 308L
    A continuous solid corrosion resisting chromium-nickel wire. The alloy has a low carbon content which makes this alloy particularly recommended were there is a risc of
    intergranular corrosion.
    The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers.
    For joining of stainless steels of 18% Cr - 8% Ni-type and Nb-stabilized steels of the same type if the service temperature will not exceed 350°C.

    Classifications Wire Electrode SFA/AWS A5.9 : ER308L


    EN ISO 14343-A : G 19 9 L
    Werkstoffnummer : ~1.4316
    Approvals ABS ER308/308L
    CE EN 13479
    NAKS/HAKC 1.0 mm
    Approvals are based on factory location. Please contact ESAB for more information.

    Alloy Type Austenitic (with approx. 8 % ferrite) 19% Cr - 9% Ni - Low C


    Shielding Gas M12, M13 (EN ISO 14175)

    Typical Tensile Properties


    Yield Strength Tensile Strength Elongation
    450 MPa (65 ksi) 620 MPa (90 ksi) 36 %
    Tested at 350°C (662°F).

    Typical Charpy V-Notch Properties


    Testing Temperature Impact Value
    20 °C (68 °F) 110 J (81 ft-lb)
    -60 °C (-76 °F) 90 J (66 ft-lb)
    -196 °C (-321 °F) 60 J (44 ft-lb)

    Typical Weld Metal Analysis %


    C Mn Si S P Ni Cr Mo Cu
    0.020 1.6 0.4 0.015 0.015 10.0 20.0 0.05 0.05

    Typical Wire Composition %


    C Mn Si Ni Cr Mo Cu N FN WRC-92
    0.02 1.9 0.4 9.8 19.8 0.20 0.15 0.05 9

    Deposition Data

    Diameter Current Voltage Wire Feed Speed Deposition Rate


    0.8 mm 55-160 A 15-24 V 4.0-17.0 m/min 0.9-4.1 kg/h
    (0.030 in.) (157-669 in./min) (2.0-9.0 lb/h)
    0.9 mm 55-160 A 15-24 V 4.0-17.0 m/min 0.9-4.1 kg/h
    (0.035 in.) (157-669 in./min) (2.0-9.0 lb/h)
    1.0 mm 80-240 A 15-28 V 4.0-16.0 m/min 1.5-6.0 kg/h
    (0.040 in.) (157-630 in./min) (3.3-13. lb/h)
    1.14 mm 80-240 A 15-28 V 4.0-16.0 m/min 1.5-6.0 kg/h
    (0.045 in.) (157-630 in./min) (3.3-13. lb/h)
    1.2 mm 100-300 A 14-28.5 V 3.0-14.0 m/min 1.6-7.5 kg/h
    (0.047 in.) (118-551 in./min) (3.5-16. lb/h)
    1.6 mm 230-375 A 23-29 V 5.5-9.0 m/min 5.2-8.6 kg/h
    (1/16 in.) (217-354 in./min) (11.5-19. lb/h)
    10886-en_US-FactSheet_Main-01 2022-02-08

    esab.com/fillermetals

    You might also like