SABIC® LLDPE - 218WJA - Americas - Technical - Data - Sheet
SABIC® LLDPE - 218WJA - Americas - Technical - Data - Sheet
SABIC® LLDPE - 218WJA - Americas - Technical - Data - Sheet
DESCRIPTION
SABIC® LLDPE 218WJA is a butene Linear Low Density Polyethylene TNPP free grade suitable for general‐purpose packaging. It is easy to
process giving good tensile properties, impact strength and optical properties. 218WJA contains slip and antiblock additives.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
TYPICAL APPLICATIONS
Lamination film, thin liners, shopping bags, carrier bags, garbage bags, coextruded films, consumer packaging and other general-purpose applications.
POLYMER PROPERTIES
Melt Flow Rate (MFR)
FILM PROPERTIES
(1)
Tensile test film
THERMAL PROPERTIES
DSC test
Melting point 121 °C SABIC method
(1) Mechanical properties have been measured by producing 30 μ film with 2.5 BUR using 100% 218NJ.
THERMAL PROPERTIES
DSC test
Melting point 121 °C SABIC method
(1) Mechanical properties have been measured by producing 30 μ film with 2.5 BUR using 100% 218NJ.
PROCESSING CONDITIONS
Typical processing conditions for 218WJA are:
Melt temperature: 185 - 205°C, Blow up ratio: 2.0 - 3.0
DISCLAIMER
Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed
otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE
PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller
materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is
intended, or should be construed, to grant any license under any patent or other intellectual property right.