Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 9 views

    Model CRP Rotation Packer

    Uploaded by

    Cheasar Septian
    The CRP packer is a rotation set packer designed to run below a down hole gas separator. It uses a Tubing Anchor Catcher to anchor the packer to the casing. The packer has special features including being short and compact, inexpensive, and easy to set and release while allowing tubing to remain in tension, compression, or neutral. The running and setting procedure involves making up the packer, gas separator, and nipple before running into the hole and rotating tubing to set the anchor and packer.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Model CRP Rotation Packer

    Uploaded by

    Cheasar Septian
    9 views1 page
    The CRP packer is a rotation set packer designed to run below a down hole gas separator. It uses a Tubing Anchor Catcher to anchor the packer to the casing. The packer has special features including being short and compact, inexpensive, and easy to set and release while allowing tubing to remain in tension, compression, or neutral. The running and setting procedure involves making up the packer, gas separator, and nipple before running into the hole and rotating tubing to set the anchor and packer.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The CRP packer is a rotation set packer designed to run below a down hole gas separator. It uses a Tubing Anchor Catcher to anchor the packer to the casing. The packer has special features including being short and compact, inexpensive, and easy to set and release while allowing tubing to remain in tension, compression, or neutral. The running and setting procedure involves making up the packer, gas separator, and nipple before running into the hole and rotating tubing to set the anchor and packer.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    9 views1 page

    Model CRP Rotation Packer

    Uploaded by

    Cheasar Septian
    The CRP packer is a rotation set packer designed to run below a down hole gas separator. It uses a Tubing Anchor Catcher to anchor the packer to the casing. The packer has special features including being short and compact, inexpensive, and easy to set and release while allowing tubing to remain in tension, compression, or neutral. The running and setting procedure involves making up the packer, gas separator, and nipple before running into the hole and rotating tubing to set the anchor and packer.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    www.watsonpacker.com • 432.552.

    0102

    Model ‘CRP’ Rotation Set Packer


    The CRP packer is a rotation set packer designed to run below a down hole gas separator.
    It uses a Tubing Anchor Catcher to anchor the packer to the casing. After the packer is set
    there is no movement to wear out the slips or other parts, allowing it to stay set under the
    most severe conditions.

    Special Features
    • Short and compact
    •Inexpensive
    BEST
    •Easy to set and release SELLER
    •Tubing can be left in tension, compression or neutral
    •Built in fluid bypass for running and retrieving

    Running and Setting Procedure


    Make up packer on top of tubing anchor by holding backup on lower mandrel of packer
    and wrench on bottom of anchor. Make up Gas Separator up on top of packer, hold backup
    on top sub of packer and wrench on bottom on gas separator. Make up pump seating
    nipple in top of gas separator and run in hole slowly to setting depth. Make sure all tubing
    joints are tight. Rotate the tubing to the left 5 to 7 rounds to set the tubing anchor. The
    tubing should torque up when the slips contact the casing, continue turning the tubing 3 to
    4 rounds to shear the rotational shear screw in the packer and expand the packing elements.
    Hold torque on tubing while setting down and picking up to be sure the packer and anchor
    is securely anchored to the casing. Land the tubing with the desired amount of tension.

    Releasing Procedure
    Set 2000 lbs down on anchor and rotate to right until anchor releases.

    Specification Guide
    Casing Packer
    Base Product
    Standard Thread Number
    O.D. Weight lb/ft Min I.D. Max I.D. Max O.D. Max I.D.
    Connections
    4 9.5 - 11.0 3.476 3.548 3.250 1.72 11⁄2 EUE 43840
    41/2 9.5 - 13.5 3.920 4.090 3.750 2.00 23⁄8 EUE 43845
    5 11.5 - 18.0 4.276 4.560 4.125 2.00 23⁄8 EUE 43850
    51/2 14.0 - 20.0 4.778 5.012 4.640 2.38 27⁄8 EUE 43855
    51/2 20.0 - 23.0 4.670 4.890 4.500 2.375 27⁄8 EUE 43854
    65/8 28.0 - 32.0 5.675 5.791 5.500 2.50 27⁄8 EUE 43865
    65/8 20.0 - 24.0 5.921 6.049 5.735 2.50 27⁄8 EUE 43865B
    7 20.0 - 29.0 6.184 6.456 5.970 2.50 27⁄8 EUE 43870

    6 wat s o n pac ker llc p ri c e b o o k rev. 04/2014

    You might also like