POTABLE WATER STABILIZER

Wilhelmsen Ships Service AS

Part Number: 624916 Issue Date: 12/09/2017
Version No: 2.4 Print Date: 22/04/2022
Safety Data Sheet (Conforms to Annex II of REACH (1907/2006) - Regulation 2020/878) L.REACH.NOR.EN

SECTION 1 Identification of the substance / mixture and of the company / undertaking

1.1. Product Identifier

Product name POTABLE WATER STABILIZER

Chemical Name Not Applicable

Synonyms 624916 (25 kg)
Chemical formula Not Applicable
Other means of
624916
identification

1.2. Relevant identified uses of the substance or mixture and uses advised against
Chemical Product
PC37 Water treatment chemicals
Category

Sectors of Use SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen)

Relevant identified uses Potable water treatment

Uses advised against Not Applicable

1.3. Details of the supplier of the safety data sheet

Outback (M)SDS portal:
Wilhelmsen Ships Service AS*
Registered company name Wilhelmsen Ships Service AS http://jr.chemwatch.net/outb/account
Central Warehouse
/autologin?login=wilhelmsen
--------Use our Outback portal to obtain our
(M)SDSs in other languages and/or
Strandveien 20 Lysaker 1366 format.--------- For questions relating to our Willem Barentszstraat 50 Rotterdam
Address
Norway SDSs please use Email: Netherlands
WSS.GLOBAL.SDSINFO@wilhelmsen.com
--------- Norway
Telephone +47 67 58 40 00 Not Available +31 10 4877 777

Fax Not Available Not Available Not Available

Website http://www.wilhelmsen.com/ http://www.wilhelmsen.com http://www.wilhelmsen.com
Email wss.norway.cs@wilhelmsen.com wss.global.sdsinfo@wilhelmsen.com wss.rotterdam@wilhelmsen.com

Registered company name Wilhelmsen Ships Service AS* Central Warehouse

Address Willem Barentszstraat 50 Rotterdam Netherlands
Telephone +31 10 4877 777
Fax Not Available
Website http://www.wilhelmsen.com
Email wss.rotterdam@wilhelmsen.com

Page 1 continued...
Part Number: 624916 Page 2 of 12 Issue Date: 12/09/2017
Version No: 2.4 Print Date: 22/04/2022
POTABLE WATER STABILIZER

1.4. Emergency telephone number

Association / Organisation Giftinformasjonssentralen - 24 timer 24hrs - Chemtrec Dutch nat. poison centre
Emergency telephone
+47 22591300 +31-10-4877700 + 31 88 7558561
numbers

Other emergency
+31-10-4877700 +1 800 424 9300 + 31 10 4877700
telephone numbers

Association / Organisation Dutch nat. poison centre CHEMWATCH EMERGENCY RESPONSE

Emergency telephone
+ 31 30 274 88 88 +47 23 25 25 84
numbers

Other emergency
+ 31-10-4877700 +61 2 9186 1132
telephone numbers

Once connected and if the message is not in your prefered language then please dial 01

SECTION 2 Hazards identification

2.1. Classification of the substance or mixture

Classification according to
regulation (EC) No
Not Applicable
1272/2008 [CLP] and
amendments [1]

2.2. Label elements

Hazard pictogram(s) Not Applicable

Signal word Not Applicable

Hazard statement(s)
Not Applicable

Supplementary statement(s)
Not Applicable

Precautionary statement(s) General

P101 If medical advice is needed, have product container or label at hand.

P102 Keep out of reach of children.

P103 Read carefully and follow all instructions.

Precautionary statement(s) Prevention

Not Applicable

Precautionary statement(s) Response

Not Applicable

Precautionary statement(s) Storage

Not Applicable

Precautionary statement(s) Disposal

Not Applicable

2.3. Other hazards

REACh - Art.57-59: The mixture does not contain Substances of Very High Concern (SVHC) at the SDS print date.

SECTION 3 Composition / information on ingredients

3.1.Substances
See 'Composition on ingredients' in Section 3.2

Continued...
Part Number: 624916 Page 3 of 12 Issue Date: 12/09/2017
Version No: 2.4 Print Date: 22/04/2022
POTABLE WATER STABILIZER

3.2.Mixtures
1.CAS No
Classification according to regulation
2.EC No SCL / Nanoform Particle
%[weight] Name (EC) No 1272/2008 [CLP] and
3.Index No M-Factor Characteristics
amendments
4.REACH No

1.10124-56-8*
2.233-343-1 sodium Not
90-100 Not Applicable Not Available
3.Not Available hexametaphosphate Available
4.Not Available

Legend: 1. Classified by Chemwatch; 2. Classification drawn from Regulation (EU) No 1272/2008 - Annex VI; 3. Classification drawn from
C&L; * EU IOELVs available; [e] Substance identified as having endocrine disrupting properties

SECTION 4 First aid measures

4.1. Description of first aid measures

If this product comes in contact with eyes:
Wash out immediately with water.
Eye Contact
If irritation continues, seek medical attention.
Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.
If skin or hair contact occurs:
Skin Contact Flush skin and hair with running water (and soap if available).
Seek medical attention in event of irritation.

If fumes, aerosols or combustion products are inhaled remove from contaminated area.
Inhalation
Other measures are usually unnecessary.

Immediately give a glass of water.

Ingestion
First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.

4.2 Most important symptoms and effects, both acute and delayed
See Section 11

4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically.

SECTION 5 Firefighting measures

5.1. Extinguishing media

There is no restriction on the type of extinguisher which may be used.
Use extinguishing media suitable for surrounding area.

5.2. Special hazards arising from the substrate or mixture

Fire Incompatibility None known.

5.3. Advice for firefighters

Alert Fire Brigade and tell them location and nature of hazard.
Wear breathing apparatus plus protective gloves in the event of a fire.
Prevent, by any means available, spillage from entering drains or water courses.
Fire Fighting Use fire fighting procedures suitable for surrounding area.
DO NOT approach containers suspected to be hot.
Cool fire exposed containers with water spray from a protected location.
If safe to do so, remove containers from path of fire.

Non combustible.
Fire/Explosion Hazard
Not considered a significant fire risk, however containers may burn.

SECTION 6 Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

See section 8

6.2. Environmental precautions

Continued...
Part Number: 624916 Page 4 of 12 Issue Date: 12/09/2017
Version No: 2.4 Print Date: 22/04/2022
POTABLE WATER STABILIZER

See section 12

6.3. Methods and material for containment and cleaning up

Clean up all spills immediately.
Avoid contact with skin and eyes.
Wear impervious gloves and safety glasses.
Use dry clean up procedures and avoid generating dust.
Vacuum up (consider explosion-proof machines designed to be grounded during storage and use).
Minor Spills
Do NOT use air hoses for cleaning
Place spilled material in clean, dry, sealable, labelled container.

Clear area of personnel and move upwind.

Alert Fire Brigade and tell them location and nature of hazard.
Control personal contact with the substance, by using protective equipment and dust respirator.
Major Spills
Prevent spillage from entering drains, sewers or water courses.
Avoid generating dust.
Sweep, shovel up. Recover product wherever possible.

6.4. Reference to other sections

Personal Protective Equipment advice is contained in Section 8 of the SDS.

SECTION 7 Handling and storage

7.1. Precautions for safe handling

Limit all unnecessary personal contact.
Wear protective clothing when risk of exposure occurs.
Use in a well-ventilated area.
Safe handling Avoid contact with incompatible materials.
When handling, DO NOT eat, drink or smoke.
Keep containers securely sealed when not in use.
Avoid physical damage to containers.

Fire and explosion

See section 5
protection

Store in original containers.

Keep containers securely sealed.
Store in a cool, dry area protected from environmental extremes.
Store away from incompatible materials and foodstuff containers.
Protect containers against physical damage and check regularly for leaks.
Other information Observe manufacturer's storage and handling recommendations contained within this SDS.
For major quantities:
Consider storage in bunded areas - ensure storage areas are isolated from sources of community water (including
stormwater, ground water, lakes and streams}.
Ensure that accidental discharge to air or water is the subject of a contingency disaster management plan; this may require
consultation with local authorities.

7.2. Conditions for safe storage, including any incompatibilities

Lined metal can, lined metal pail/ can.
Plastic pail.
Suitable container Polyliner drum.
Packing as recommended by manufacturer.
Check all containers are clearly labelled and free from leaks.
Storage incompatibility None known

+ + + + + + +

X — Must not be stored together

0 — May be stored together with specific preventions
+ — May be stored together

Note: Depending on other risk factors, compatibility assessment based on the table above may not be relevant to storage situations, particularly where large volumes
of dangerous goods are stored and handled. Reference should be made to the Safety Data Sheets for each substance or article and risks assessed accordingly.
Continued...
Part Number: 624916 Page 5 of 12 Issue Date: 12/09/2017
Version No: 2.4 Print Date: 22/04/2022
POTABLE WATER STABILIZER

7.3. Specific end use(s)

See section 1.2

SECTION 8 Exposure controls / personal protection

8.1. Control parameters

DNELs PNECs
Ingredient
Exposure Pattern Worker Compartment

Inhalation 5.88 mg/m³ (Systemic, Chronic)

sodium hexametaphosphate Not Available
Inhalation 1.45 mg/m³ (Systemic, Chronic) *

* Values for General Population

Occupational Exposure Limits (OEL)

INGREDIENT DATA

Source Ingredient Material name TWA STEL Peak Notes

Not Available Not Available Not Available Not Available Not Available Not Available Not Available

Not Applicable

Emergency Limits

Ingredient TEEL-1 TEEL-2 TEEL-3

POTABLE WATER
Not Available Not Available Not Available
STABILIZER

Ingredient Original IDLH Revised IDLH

sodium hexametaphosphate Not Available Not Available

MATERIAL DATA
It is the goal of the ACGIH (and other Agencies) to recommend TLVs (or their equivalent) for all substances for which there is evidence of health effects at airborne
concentrations encountered in the workplace.
At this time no TLV has been established, even though this material may produce adverse health effects (as evidenced in animal experiments or clinical
experience). Airborne concentrations must be maintained as low as is practically possible and occupational exposure must be kept to a minimum.
NOTE: The ACGIH occupational exposure standard for Particles Not Otherwise Specified (P.N.O.S) does NOT apply.

8.2. Exposure controls

Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard. Well-designed
engineering controls can be highly effective in protecting workers and will typically be independent of worker interactions to
provide this high level of protection.
The basic types of engineering controls are:
8.2.1. Appropriate
Process controls which involve changing the way a job activity or process is done to reduce the risk.
engineering controls
Enclosure and/or isolation of emission source which keeps a selected hazard "physically" away from the worker and ventilation
that strategically "adds" and "removes" air in the work environment. Ventilation can remove or dilute an air contaminant if
designed properly. The design of a ventilation system must match the particular process and chemical or contaminant in use.
Employers may need to use multiple types of controls to prevent employee overexposure.

8.2.2. Personal protection

Safety glasses with side shields

Chemical goggles.
Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A written policy
document, describing the wearing of lenses or restrictions on use, should be created for each workplace or task. This should
Eye and face protection include a review of lens absorption and adsorption for the class of chemicals in use and an account of injury experience.
Medical and first-aid personnel should be trained in their removal and suitable equipment should be readily available. In the
event of chemical exposure, begin eye irrigation immediately and remove contact lens as soon as practicable. Lens should
be removed at the first signs of eye redness or irritation - lens should be removed in a clean environment only after workers
have washed hands thoroughly.

Skin protection See Hand protection below

The selection of suitable gloves does not only depend on the material, but also on further marks of quality which vary from
Hands/feet protection manufacturer to manufacturer. Where the chemical is a preparation of several substances, the resistance of the glove material
can not be calculated in advance and has therefore to be checked prior to the application.

Continued...
Part Number: 624916 Page 6 of 12 Issue Date: 12/09/2017
Version No: 2.4 Print Date: 22/04/2022
POTABLE WATER STABILIZER

The exact break through time for substances has to be obtained from the manufacturer of the protective gloves and has to be
observed when making a final choice.
Personal hygiene is a key element of effective hand care. Gloves must only be worn on clean hands. After using gloves, hands
should be washed and dried thoroughly. Application of a non-perfumed moisturiser is recommended.
Experience indicates that the following polymers are suitable as glove materials for protection against undissolved, dry solids,
where abrasive particles are not present.
polychloroprene.
nitrile rubber.
butyl rubber.
fluorocaoutchouc.
polyvinyl chloride.
Gloves should be examined for wear and/ or degradation constantly.
Body protection See Other protection below

No special equipment needed when handling small quantities.

OTHERWISE:
Other protection Overalls.
Barrier cream.
Eyewash unit.

Respiratory protection
Particulate. (AS/NZS 1716 & 1715, EN 143:2000 & 149:001, ANSI Z88 or national equivalent)

Required Minimum Protection Factor Half-Face Respirator Full-Face Respirator Powered Air Respirator

P1 - PAPR-P1
up to 10 x ES
Air-line* - -

up to 50 x ES Air-line** P2 PAPR-P2
up to 100 x ES - P3 -
Air-line* -

100+ x ES - Air-line** PAPR-P3

* - Negative pressure demand ** - Continuous flow

A(All classes) = Organic vapours, B AUS or B1 = Acid gasses, B2 = Acid gas or hydrogen cyanide(HCN), B3 = Acid gas or hydrogen cyanide(HCN), E = Sulfur
dioxide(SO2), G = Agricultural chemicals, K = Ammonia(NH3), Hg = Mercury, NO = Oxides of nitrogen, MB = Methyl bromide, AX = Low boiling point organic
compounds(below 65 degC)

· Respirators may be necessary when engineering and administrative controls do not adequately prevent exposures.
· The decision to use respiratory protection should be based on professional judgment that takes into account toxicity information, exposure measurement data,
and frequency and likelihood of the worker's exposure - ensure users are not subject to high thermal loads which may result in heat stress or distress due to
personal protective equipment (powered, positive flow, full face apparatus may be an option).
· Published occupational exposure limits, where they exist, will assist in determining the adequacy of the selected respiratory protection. These may be
government mandated or vendor recommended.
· Certified respirators will be useful for protecting workers from inhalation of particulates when properly selected and fit tested as part of a complete respiratory
protection program.
· Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU)
· Use approved positive flow mask if significant quantities of dust becomes airborne.
· Try to avoid creating dust conditions.

8.2.3. Environmental exposure controls

See section 12

SECTION 9 Physical and chemical properties

9.1. Information on basic physical and chemical properties

Appearance white

Relative density (Water =

Physical state Solid 1250
1)

Partition coefficient
Odour Not Available Not Available
n-octanol / water

Auto-ignition temperature
Odour threshold Not Available Not Available
(°C)

Decomposition
pH (as supplied) 6 Not Available
temperature

Continued...
Part Number: 624916 Page 7 of 12 Issue Date: 12/09/2017
Version No: 2.4 Print Date: 22/04/2022
POTABLE WATER STABILIZER

Melting point / freezing

Not Available Viscosity (cSt) Not Available
point (°C)
Initial boiling point and
Not Available Molecular weight (g/mol) Not Available
boiling range (°C)
Flash point (°C) Not Available Taste Not Available

Evaporation rate Not Available BuAC = 1 Explosive properties Not Available

Flammability Not Available Oxidising properties Not Available

Surface Tension (dyn/cm

Upper Explosive Limit (%) Not Available Not Applicable
or mN/m)
Lower Explosive Limit (%) Not Available Volatile Component (%vol) Not Available

Vapour pressure (kPa) Not Available Gas group Not Available

pH as a solution (Not
Solubility in water Miscible Not Available
Available%)

Vapour density (Air = 1) Not Available VOC g/L Not Available

Nanoform Particle
Nanoform Solubility Not Available Not Available
Characteristics
Particle Size Not Available

9.2. Other information

Not Available

SECTION 10 Stability and reactivity

10.1.Reactivity See section 7.2

10.2. Chemical stability Product is considered stable and hazardous polymerisation will not occur.
10.3. Possibility of
See section 7.2
hazardous reactions

10.4. Conditions to avoid See section 7.2

10.5. Incompatible
See section 7.2
materials
10.6. Hazardous
See section 5.3
decomposition products

SECTION 11 Toxicological information

11.1. Information on toxicological effects

The material is not thought to produce adverse health effects or irritation of the respiratory tract (as classified by EC Directives
Inhaled using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and that suitable control
measures be used in an occupational setting.

The material has NOT been classified by EC Directives or other classification systems as "harmful by ingestion". This is because
of the lack of corroborating animal or human evidence. The material may still be damaging to the health of the individual,
following ingestion, especially where pre-existing organ (e.g liver, kidney) damage is evident. Present definitions of harmful or
Ingestion
toxic substances are generally based on doses producing mortality rather than those producing morbidity (disease, ill-health).
Gastrointestinal tract discomfort may produce nausea and vomiting. In an occupational setting however, ingestion of insignificant
quantities is not thought to be cause for concern.

The material is not thought to produce adverse health effects or skin irritation following contact (as classified by EC Directives
Skin Contact using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and that suitable gloves
be used in an occupational setting.
Although the material is not thought to be an irritant (as classified by EC Directives), direct contact with the eye may cause
Eye transient discomfort characterised by tearing or conjunctival redness (as with windburn). Slight abrasive damage may also result.
The material may produce foreign body irritation in certain individuals.

Long-term exposure to the product is not thought to produce chronic effects adverse to health (as classified by EC Directives
Chronic
using animal models); nevertheless exposure by all routes should be minimised as a matter of course.

POTABLE WATER TOXICITY IRRITATION

STABILIZER Not Available Not Available

sodium TOXICITY IRRITATION

hexametaphosphate

Continued...
Part Number: 624916 Page 8 of 12 Issue Date: 12/09/2017
Version No: 2.4 Print Date: 22/04/2022
POTABLE WATER STABILIZER

Dermal (rabbit) LD50: >7940 mg/kg[2] Eye: no adverse effect observed (not irritating)[1]

Oral (Rat) LD50; 6600 mg/kg[2] Skin: no adverse effect observed (not irritating)[1]

Legend: 1. Value obtained from Europe ECHA Registered Substances - Acute toxicity 2.* Value obtained from manufacturer's SDS.
Unless otherwise specified data extracted from RTECS - Register of Toxic Effect of chemical Substances

Asthma-like symptoms may continue for months or even years after exposure to the material ends. This may be due to a
non-allergic condition known as reactive airways dysfunction syndrome (RADS) which can occur after exposure to high levels of
highly irritating compound. Main criteria for diagnosing RADS include the absence of previous airways disease in a non-atopic
individual, with sudden onset of persistent asthma-like symptoms within minutes to hours of a documented exposure to the
sodium irritant. Other criteria for diagnosis of RADS include a reversible airflow pattern on lung function tests, moderate to severe
hexametaphosphate bronchial hyperreactivity on methacholine challenge testing, and the lack of minimal lymphocytic inflammation, without
eosinophilia. RADS (or asthma) following an irritating inhalation is an infrequent disorder with rates related to the concentration of
and duration of exposure to the irritating substance. On the other hand, industrial bronchitis is a disorder that occurs as a result of
exposure due to high concentrations of irritating substance (often particles) and is completely reversible after exposure ceases.
The disorder is characterized by difficulty breathing, cough and mucus production.

Acute Toxicity Carcinogenicity

Skin Irritation/Corrosion Reproductivity
Serious Eye
STOT - Single Exposure
Damage/Irritation
Respiratory or Skin
STOT - Repeated Exposure
sensitisation
Mutagenicity Aspiration Hazard

Legend: – Data either not available or does not fill the criteria for classification
– Data available to make classification

11.2.1. Endocrine Disruption Properties

Not Available

SECTION 12 Ecological information

12.1. Toxicity

Endpoint Test Duration (hr) Species Value Source

POTABLE WATER
STABILIZER Not Not Not
Not Available Not Available
Available Available Available

Endpoint Test Duration (hr) Species Value Source

NOEC(ECx) 72h Algae or other aquatic plants 32mg/l 2
sodium
LC50 96h Fish >100mg/l 2
hexametaphosphate
EC50 72h Algae or other aquatic plants >100mg/l 2

EC50 48h Crustacea >485mg/l 2

Legend: Extracted from 1. IUCLID Toxicity Data 2. Europe ECHA Registered Substances - Ecotoxicological Information - Aquatic Toxicity
4. US EPA, Ecotox database - Aquatic Toxicity Data 5. ECETOC Aquatic Hazard Assessment Data 6. NITE (Japan) -
Bioconcentration Data 7. METI (Japan) - Bioconcentration Data 8. Vendor Data

May cause long-term adverse effects in the aquatic environment.

Do NOT allow product to come in contact with surface waters or to intertidal areas below the mean high water mark. Do not contaminate water when cleaning
equipment or disposing of equipment wash-waters.
Wastes resulting from use of the product must be disposed of on site or at approved waste sites.

12.2. Persistence and degradability

Ingredient Persistence: Water/Soil Persistence: Air

No Data available for all ingredients No Data available for all ingredients

12.3. Bioaccumulative potential

Ingredient Bioaccumulation

No Data available for all ingredients

Continued...
Part Number: 624916 Page 9 of 12 Issue Date: 12/09/2017
Version No: 2.4 Print Date: 22/04/2022
POTABLE WATER STABILIZER

12.4. Mobility in soil

Ingredient Mobility
No Data available for all ingredients

12.5. Results of PBT and vPvB assessment

P B T
Relevant available data Not Available Not Available Not Available

PBT
vPvB

PBT Criteria fulfilled? No

vPvB No

12.6. Endocrine Disruption Properties

Not Available

12.7. Other adverse effects

Not Available

SECTION 13 Disposal considerations

13.1. Waste treatment methods

Recycle wherever possible or consult manufacturer for recycling options.
Product / Packaging Consult State Land Waste Management Authority for disposal.
disposal Bury residue in an authorised landfill.
Recycle containers if possible, or dispose of in an authorised landfill.

Waste treatment options Not Available

Sewage disposal options Not Available

SECTION 14 Transport information

Labels Required
Marine Pollutant NO

Land transport (ADR): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS

14.1. UN number Not Applicable
14.2. UN proper shipping
Not Applicable
name

14.3. Transport hazard Class Not Applicable

class(es) Subrisk Not Applicable

14.4. Packing group Not Applicable

14.5. Environmental
Not Applicable
hazard

Hazard identification (Kemler) Not Applicable

Classification code Not Applicable

14.6. Special precautions Hazard Label Not Applicable

for user Special provisions Not Applicable
Limited quantity Not Applicable

Tunnel Restriction Code Not Applicable

Air transport (ICAO-IATA / DGR): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS
14.1. UN number Not Applicable

Continued...
Part Number: 624916 Page 10 of 12 Issue Date: 12/09/2017
Version No: 2.4 Print Date: 22/04/2022
POTABLE WATER STABILIZER

14.2. UN proper shipping

Not Applicable
name

ICAO/IATA Class Not Applicable

14.3. Transport hazard
ICAO / IATA Subrisk Not Applicable
class(es)
ERG Code Not Applicable

14.4. Packing group Not Applicable

14.5. Environmental
Not Applicable
hazard

Special provisions Not Applicable

Cargo Only Packing Instructions Not Applicable

Cargo Only Maximum Qty / Pack Not Applicable

14.6. Special precautions
Passenger and Cargo Packing Instructions Not Applicable
for user
Passenger and Cargo Maximum Qty / Pack Not Applicable
Passenger and Cargo Limited Quantity Packing Instructions Not Applicable
Passenger and Cargo Limited Maximum Qty / Pack Not Applicable

Sea transport (IMDG-Code / GGVSee): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS
14.1. UN number Not Applicable
14.2. UN proper shipping
Not Applicable
name

14.3. Transport hazard IMDG Class Not Applicable

class(es) IMDG Subrisk Not Applicable

14.4. Packing group Not Applicable

14.5. Environmental
Not Applicable
hazard

EMS Number Not Applicable

14.6. Special precautions
Special provisions Not Applicable
for user
Limited Quantities Not Applicable

Inland waterways transport (ADN): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS
14.1. UN number Not Applicable
14.2. UN proper shipping
Not Applicable
name

14.3. Transport hazard

Not Applicable Not Applicable
class(es)

14.4. Packing group Not Applicable

14.5. Environmental
Not Applicable
hazard

Classification code Not Applicable

Special provisions Not Applicable

14.6. Special precautions
Limited quantity Not Applicable
for user
Equipment required Not Applicable

Fire cones number Not Applicable

14.7. Transport in bulk according to Annex II of MARPOL and the IBC code
Not Applicable

14.8. Transport in bulk in accordance with MARPOL Annex V and the IMSBC Code
Product name Group

sodium hexametaphosphate Not Available

Continued...
Part Number: 624916 Page 11 of 12 Issue Date: 12/09/2017
Version No: 2.4 Print Date: 22/04/2022
POTABLE WATER STABILIZER

14.9. Transport in bulk in accordance with the ICG Code

Product name Ship Type
sodium hexametaphosphate Not Available

SECTION 15 Regulatory information

15.1. Safety, health and environmental regulations / legislation specific for the substance or mixture

sodium hexametaphosphate is found on the following regulatory lists

Europe EC Inventory European Union - European Inventory of Existing Commercial Chemical
Substances (EINECS)

This safety data sheet is in compliance with the following EU legislation and its adaptations - as far as applicable - : Directives 98/24/EC, - 92/85/EEC, - 94/33/EC,
- 2008/98/EC, - 2010/75/EU; Commission Regulation (EU) 2020/878; Regulation (EC) No 1272/2008 as updated through ATPs.

15.2. Chemical safety assessment

No Chemical Safety Assessment has been carried out for this substance/mixture by the supplier.

ECHA SUMMARY
Ingredient CAS number Index No ECHA Dossier

sodium hexametaphosphate 10124-56-8* Not Available Not Available

Harmonisation (C&L
Hazard Class and Category Code(s) Pictograms Signal Word Code(s) Hazard Statement Code(s)
Inventory)

1 Not Classified Not Available Not Available

2 STOT SE 3; Eye Dam. 1 GHS05; Dgr H335; H314; H318
Harmonisation Code 1 = The most prevalent classification. Harmonisation Code 2 = The most severe classification.

National Inventory Status

National Inventory Status

Australia - AIIC / Australia

Yes
Non-Industrial Use

Canada - DSL Yes

Canada - NDSL No (sodium hexametaphosphate)
China - IECSC Yes

Europe - EINEC / ELINCS /

Yes
NLP
Japan - ENCS Yes

Korea - KECI Yes

New Zealand - NZIoC Yes

Philippines - PICCS Yes

USA - TSCA Yes

Taiwan - TCSI Yes

Mexico - INSQ Yes

Vietnam - NCI Yes

Russia - FBEPH Yes

Yes = All CAS declared ingredients are on the inventory

Legend: No = One or more of the CAS listed ingredients are not on the inventory. These ingredients may be exempt or will require
registration.

SECTION 16 Other information

Revision Date 12/09/2017

Initial Date 12/09/2017

CONTACT POINT
- For quotations contact your local Customer Services - http://wssdirectory.wilhelmsen.com/#/customerservices - - Responsible for safety data sheet Wilhelmsen

Continued...
Part Number: 624916 Page 12 of 12 Issue Date: 12/09/2017
Version No: 2.4 Print Date: 22/04/2022
POTABLE WATER STABILIZER

Ships Service AS - Prepared by: Product HSE Manager, - Email: Email: WSS.GLOBAL.SDSINFO@wilhelmsen.com - Telephone: Tel.: +31 10 4877775

Full text Risk and Hazard codes

H314 Causes severe skin burns and eye damage.
H318 Causes serious eye damage.

H335 May cause respiratory irritation.

Other information
Classification of the preparation and its individual components has drawn on official and authoritative sources as well as independent review by the Chemwatch
Classification committee using available literature references.

The SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whether the reported Hazards are Risks
in the workplace or other settings. Risks may be determined by reference to Exposures Scenarios. Scale of use, frequency of use and current or available
engineering controls must be considered.

For detailed advice on Personal Protective Equipment, refer to the following EU CEN Standards:
EN 166 Personal eye-protection
EN 340 Protective clothing
EN 374 Protective gloves against chemicals and micro-organisms
EN 13832 Footwear protecting against chemicals
EN 133 Respiratory protective devices

Definitions and abbreviations

PC－TWA: Permissible Concentration-Time Weighted Average
PC－STEL: Permissible Concentration-Short Term Exposure Limit
IARC: International Agency for Research on Cancer
ACGIH: American Conference of Governmental Industrial Hygienists
STEL: Short Term Exposure Limit
TEEL: Temporary Emergency Exposure Limit。
IDLH: Immediately Dangerous to Life or Health Concentrations
ES: Exposure Standard
OSF: Odour Safety Factor
NOAEL :No Observed Adverse Effect Level
LOAEL: Lowest Observed Adverse Effect Level
TLV: Threshold Limit Value
LOD: Limit Of Detection
OTV: Odour Threshold Value
BCF: BioConcentration Factors
BEI: Biological Exposure Index
AIIC: Australian Inventory of Industrial Chemicals
DSL: Domestic Substances List
NDSL: Non-Domestic Substances List
IECSC: Inventory of Existing Chemical Substance in China
EINECS: European INventory of Existing Commercial chemical Substances
ELINCS: European List of Notified Chemical Substances
NLP: No-Longer Polymers
ENCS: Existing and New Chemical Substances Inventory
KECI: Korea Existing Chemicals Inventory
NZIoC: New Zealand Inventory of Chemicals
PICCS: Philippine Inventory of Chemicals and Chemical Substances
TSCA: Toxic Substances Control Act
TCSI: Taiwan Chemical Substance Inventory
INSQ: Inventario Nacional de Sustancias Químicas
NCI: National Chemical Inventory
FBEPH: Russian Register of Potentially Hazardous Chemical and Biological Substances

Powered by AuthorITe, from Chemwatch.

end of SDS