SAFETY DATA SHEET

QUARTZ INEO MC3 5W-30

SDS # : 082906

Section 1. Identification
Product identifier : QUARTZ INEO MC3 5W-30

Relevant identified uses of the substance or mixture and uses advised against
Identified uses
Engine oil
TOTAL
Supplier's details :

TotalEnergies Marketing Asia-Pacific Middle East Pte. Ltd.

182 Cecil Street
#27-01 Frasers Tower
Singapore 069547
Tel: +65 6879 2200
ms.ap-sds@totalenergies.com

Emergency telephone :
number (with hours of
operation)
Asia-Pacific: +65 3158 1074

Section 2. Hazards identification

Classification of the : Not classified.
substance or mixture

GHS label elements, including precautionary statements

Signal word : No signal word.
Hazard statements : No known significant effects or critical hazards.
Precautionary statements
Prevention : Not applicable.
Response : Not applicable.
Storage : Not applicable.
Disposal : Not applicable.

Other hazards which do not : Prolonged or repeated contact may dry skin and cause irritation.
result in classification

Section 3. Composition/information on ingredients

Substance/mixture : Mixture

Ingredient name % (w/w) CAS number

Distillates (petroleum), hydrotreated heavy paraffinic ≥25 - ≤50 64742-54-7
tris(branched-alkyl) borate <1 -
Additional information : Mineral oil of petroleum origin Product containing mineral oil with less than 3%
DMSO extract as measured by IP 346

Date of revision : 2022/05/04 Singapore ENGLISH Version : 1.02 1/11

 QUARTZ INEO MC3 5W-30
SDS # : 082906

There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require
reporting in this section.
Occupational exposure limits, if available, are listed in Section 8.
Chemical formula : Not applicable.

Section 4. First aid measures

Description of necessary first aid measures
Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Get medical attention.
Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Get medical attention if symptoms occur.
Skin contact : Wash skin thoroughly with soap and water or use recognized skin cleanser.
Remove contaminated clothing and shoes. Get medical attention if symptoms occur.
Ingestion : Wash out mouth with water. If material has been swallowed and the exposed
person is conscious, give small quantities of water to drink. Do not induce vomiting
unless directed to do so by medical personnel. Get medical attention if symptoms
occur.

Most important symptoms/effects, acute and delayed

Potential acute health effects
Eye contact : No known significant effects or critical hazards.
Inhalation : No known significant effects or critical hazards.
Skin contact : Defatting to the skin. May cause skin dryness and irritation.
Ingestion : No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact : No specific data.
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
irritation
dryness
cracking
Ingestion : No specific data.

Indication of immediate medical attention and special treatment needed, if necessary

Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Specific treatments : No specific treatment.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training.

See toxicological information (Section 11)

Section 5. Fire-fighting measures

Extinguishing media
Suitable extinguishing : Use dry chemical, CO₂, water spray (fog) or foam.
media
Unsuitable extinguishing : Do not use water jet.
media

Date of revision : 2022/05/04 Singapore ENGLISH Version : 1.02 2/11

 QUARTZ INEO MC3 5W-30
SDS # : 082906

Specific hazards arising : In a fire or if heated, a pressure increase will occur and the container may burst.
from the chemical
Hazardous thermal : Carbon dioxide.
decomposition products carbon monoxide
Hydrogen sulfide
Mercaptans
nitrogen oxides (NO, NO₂ etc.)
phosphorus oxides
sulfur oxides
Zinc oxides

Special protective actions : Promptly isolate the scene by removing all persons from the vicinity of the incident if
for fire-fighters there is a fire. No action shall be taken involving any personal risk or without
suitable training.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained
equipment for fire-fighters breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode.

Section 6. Accidental release measures

Personal precautions, protective equipment and emergency procedures
For non-emergency : No action shall be taken involving any personal risk or without suitable training.
personnel Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Put on appropriate
personal protective equipment.
For emergency responders : If specialized clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the
information in "For non-emergency personnel".

Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways,
drains and sewers. Inform the relevant authorities if the product has caused
environmental pollution (sewers, waterways, soil or air).

Methods and materials for containment and cleaning up

Small spill : Stop leak if without risk. Move containers from spill area. Dilute with water and mop
up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry
material and place in an appropriate waste disposal container. Dispose of via a
licensed waste disposal contractor.
Large spill : Stop leak if without risk. Move containers from spill area. Prevent entry into sewers,
water courses, basements or confined areas. Wash spillages into an effluent
treatment plant or proceed as follows. Contain and collect spillage with non-
combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth
and place in container for disposal according to local regulations (see Section 13).
Dispose of via a licensed waste disposal contractor. Note: see Section 1 for
emergency contact information and Section 13 for waste disposal.

Section 7. Handling and storage

Precautions for safe handling
Protective measures : Put on appropriate personal protective equipment (see Section 8).
Advice on general : Eating, drinking and smoking should be prohibited in areas where this material is
occupational hygiene handled, stored and processed. Workers should wash hands and face before
eating, drinking and smoking. Remove contaminated clothing and protective
equipment before entering eating areas. See also Section 8 for additional
information on hygiene measures.

Date of revision : 2022/05/04 Singapore ENGLISH Version : 1.02 3/11

 QUARTZ INEO MC3 5W-30
SDS # : 082906

Conditions for safe storage, : Store in accordance with local regulations. Store in original container protected
including any from direct sunlight in a dry, cool and well-ventilated area, away from incompatible
incompatibilities materials (see Section 10) and food and drink. Keep container tightly closed and
sealed until ready for use. Containers that have been opened must be carefully
resealed and kept upright to prevent leakage. Do not store in unlabeled containers.
Use appropriate containment to avoid environmental contamination. See Section 10
for incompatible materials before handling or use.

Section 8. Exposure controls/personal protection

Control parameters
Occupational exposure limits
Ingredient name Exposure limits
Distillates (petroleum), hydrotreated heavy paraffinic Workplace Safety and Health Act (Singapore, 2/2006).
PEL (long term): 5 mg/m³ 8 hours. Form: Mist
PEL (short term): 10 mg/m³ 15 minutes. Form: Mist
Occupational exposure limits Philippines
Product/substance Exposure limit values
Distillates (petroleum), hydrotreated heavy TLV = Threshold Limit Value (Philippines, 4/2016).
paraffinic TLV: 5 mg/m³ 8 hours.
Distillates (petroleum), hydrotreated heavy TLV = Threshold Limit Value (Philippines, 4/2016).
paraffinic TLV: 5 mg/m³ 8 hours.
Advisory OEL : Mineral oil mist: USA: OSHA (PEL) TWA 5 mg/m3, NIOSH (REL) TWA 5 mg/m3,
STEL 10 mg/m3, ACGIH (TLV) TWA 5 mg/m3 (highly refined)

Appropriate engineering : Good general ventilation should be sufficient to control worker exposure to airborne
controls contaminants.
Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure
controls they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process
equipment will be necessary to reduce emissions to acceptable levels.

Individual protection measures

Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and
safety showers are close to the workstation location.
Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn,
unless the assessment indicates a higher degree of protection: safety glasses with
side-shields.
Skin protection
Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should
be worn at all times when handling chemical products if a risk assessment indicates
this is necessary.
Hydrocarbon-proof gloves
Fluorinated rubber
nitrile rubber
Please observe the instructions regarding permeability and breakthrough time which
are provided by the supplier of the gloves. Also take into consideration the specific
local conditions under which the product is used, such as the danger of cuts,
abrasion, and the contact time.
Date of revision : 2022/05/04 Singapore ENGLISH Version : 1.02 4/11
 QUARTZ INEO MC3 5W-30
SDS # : 082906

Body protection : Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product.
Other skin protection : Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
Respiratory protection : None under normal use conditions

Section 9. Physical and chemical properties

The conditions of measurement of all properties are at standard temperature (20°C / 68°F) and pressure (1013 hPa)
unless otherwise indicated
Appearance
Physical state : Liquid.
Color : Orange. [Dark]
Odor : Characteristic.
Odor threshold : Not available.
pH : Not available.
Melting point/freezing point : Not available.
Boiling point : Not available.
Flash point : Open cup: 241°C (465.8°F) [ASTM D 92]
Evaporation rate : Not available.
Flammability (solid, gas) : Not available.
Lower and upper explosive : Not available.
(flammable) limits
Vapor pressure : Not available.
Vapor density : Not available.
Relative density : 0.852 [ASTM D 4052]
Density : 0.852 g/cm³ [15°C] [ASTM D 4052]
Solubility : Insoluble in the following materials: cold water and hot water.
Miscible with water : No.

Partition coefficient: n- : Not applicable.

octanol/water
Auto-ignition temperature : Not available.
Decomposition temperature : Not available.
Viscosity : Kinematic (40°C (104°F)): 69.4 mm2/s (69.4 cSt) [ASTM D 445]
Flow time (ISO 2431) : Not available.
Particle characteristics
Median particle size : Not applicable.

Section 10. Stability and reactivity

Reactivity : No specific test data related to reactivity available for this product or its ingredients.

Chemical stability : Stable under recommended storage and handling conditions (see Section 7).

Possibility of hazardous : Under normal conditions of storage and use, hazardous reactions will not occur.
reactions

Date of revision : 2022/05/04 Singapore ENGLISH Version : 1.02 5/11

 QUARTZ INEO MC3 5W-30
SDS # : 082906

Conditions to avoid : Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
No smoking.

Incompatible materials : Strong oxidizing agents

Hazardous decomposition : Carbon dioxide.

products carbon monoxide
Hydrogen sulfide
Mercaptans
nitrogen oxides (NO, NO₂ etc.)
phosphorus oxides
sulfur oxides
Zinc oxides
SADT : Not available.

Section 11. Toxicological information

Information on toxicological effects
Acute toxicity
Product/substance Result Species Dose Exposure Test
Distillates (petroleum), LC50 Inhalation Dusts Rat - Male, >5 mg/l 4 hours OECD 403
hydrotreated heavy paraffinic and mists Female Read across
LD50 Dermal Rabbit - >5000 mg/kg - OECD 402
Male, Female Read across
LD50 Oral Rat - Male, >5000 mg/kg - OECD 401
Female Read across
tris(branched-alkyl) borate LD50 Dermal Rat >2000 mg/kg - OECD 402
Acute
Dermal
Toxicity
LD50 Oral Rat >2000 mg/kg - OECD 420
Acute Oral
Toxicity -
Fixed Dose
Method
Conclusion/Summary : Based on available data, the classification criteria are not met.
Irritation/Corrosion
Skin : Based on available data, the classification criteria are not met.
Eyes : Based on available data, the classification criteria are not met.
Respiratory : Based on available data, the classification criteria are not met.
Sensitization
Product/substance Route of Species Result
exposure
tris(branched-alkyl) borate skin Mouse Sensitizing
Skin : Based on available data, the classification criteria are not met.
Respiratory : Based on available data, the classification criteria are not met.
Mutagenicity
Conclusion/Summary : Based on available data, the classification criteria are not met.
Carcinogenicity
Conclusion/Summary : Based on available data, the classification criteria are not met.
Date of revision : 2022/05/04 Singapore ENGLISH Version : 1.02 6/11
 QUARTZ INEO MC3 5W-30
SDS # : 082906

Reproductive toxicity
Conclusion/Summary : Based on available data, the classification criteria are not met.
Teratogenicity
Conclusion/Summary : Based on available data, the classification criteria are not met.
Specific target organ toxicity (single exposure)
Not available.
Specific target organ toxicity (repeated exposure)
Not available.
Aspiration hazard
Name Result
Distillates (petroleum), hydrotreated heavy paraffinic ASPIRATION HAZARD - Category 1

Information on the likely : Not available.

routes of exposure
Potential acute health effects
Eye contact : No known significant effects or critical hazards.
Inhalation : No known significant effects or critical hazards.
Skin contact : Defatting to the skin. May cause skin dryness and irritation.
Ingestion : No known significant effects or critical hazards.

Symptoms related to the physical, chemical and toxicological characteristics

Eye contact : No specific data.
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
irritation
dryness
cracking
Ingestion : No specific data.

Delayed and immediate effects and also chronic effects from short and long term exposure
Short term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Long term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Potential chronic health effects
Not available.
General : Prolonged or repeated contact can defat the skin and lead to irritation, cracking and/
or dermatitis.

Date of revision : 2022/05/04 Singapore ENGLISH Version : 1.02 7/11

 QUARTZ INEO MC3 5W-30
SDS # : 082906

Carcinogenicity : During use in engines, contamination of oil with low levels of combustion products
occurs. Used motor oils have been shown to cause skin cancer in mice following
repeated application and continuous exposure. Brief or intermittent skin contact
with used motor oil is not expected to have serious effects in humans if the oil is
thoroughly removed by washing with soap and water.
Mutagenicity : No known significant effects or critical hazards.
Reproductive toxicity : No known significant effects or critical hazards.

Numerical measures of toxicity

Acute toxicity estimates
N/A

Section 12. Ecological information

Toxicity
Product/substance Result Species Exposure Test
Distillates (petroleum), Acute EC50 >100 mg/l Algae - 72 hours OECD 201
hydrotreated heavy paraffinic Pseudokirchneriella
subcapitata
Acute EC50 >10000 mg/l Crustaceans - Daphnia 48 hours OECD 202
magna
Chronic NOEL >100 mg/l Algae - 72 hours OECD 201
Pseudokirchneriella
subcapitata
Chronic NOEL >1000 mg/l Crustaceans - Daphnia 21 days -
magna
tris(branched-alkyl) borate Acute EC50 21 mg/l Algae - Selenastrum 72 hours -
capricornutum
Acute EC50 5.7 mg/l Daphnia - Daphnia magna 48 hours -
Acute LC50 6.4 mg/l Fish 96 hours -
Chronic NOEC 1.9 mg/l Daphnia - Daphnia magna 21 days -

Persistence/degradability
Product/substance Test Result Dose Inoculum
Distillates (petroleum), OECD 301F 31 % - Not readily - 28 days - Activated sludge
hydrotreated heavy paraffinic

Product/substance Aquatic half-life Photolysis Biodegradability

Distillates (petroleum), - - Not readily
hydrotreated heavy paraffinic
tris(branched-alkyl) borate - - Readily

Bioaccumulative potential
Product/substance LogKow BCF Potential
Distillates (petroleum), >4 - high
hydrotreated heavy paraffinic

Mobility in soil

Date of revision : 2022/05/04 Singapore ENGLISH Version : 1.02 8/11

 QUARTZ INEO MC3 5W-30
SDS # : 082906

Soil/water partition : Not available.

coefficient (KOC)
Mobility in soil : Given its physical and chemical characteristics, the product generally shows low soil
mobility The product is insoluble and floats on water Loss by evaporation is limited

Other adverse effects : No known significant effects or critical hazards.

Section 13. Disposal considerations

Disposal methods : The generation of waste should be avoided or minimized wherever possible.
Disposal of this product, solutions and any by-products should at all times comply
with the requirements of environmental protection and waste disposal legislation
and any regional local authority requirements. Dispose of surplus and non-
recyclable products via a licensed waste disposal contractor. Waste should not be
disposed of untreated to the sewer unless fully compliant with the requirements of
all authorities with jurisdiction. Waste packaging should be recycled. Incineration or
landfill should only be considered when recycling is not feasible. This material and
its container must be disposed of in a safe way. Empty containers or liners may
retain some product residues. Avoid dispersal of spilled material and runoff and
contact with soil, waterways, drains and sewers.

Section 14. Transport information

UN IMDG ICAO/IATA ADR/RID ADN
UN/ID No Not regulated. Not regulated. Not regulated. Not regulated. Not regulated.

UN proper - - - - -
shipping name
Transport - - - - -
hazard class
(es)

Packing group - - - - -
Environmental No. No. No. No. No.
hazards

Special precautions for user : Transport within user’s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in
the event of an accident or spillage.

Transport in bulk according : Not available.

to IMO instruments

Section 15. Regulatory information

Singapore - hazardous chemicals under government control
None.
National regulations
This Safety Data Sheet (SDS) has been prepared according to Singapore Standard SS 586 on “Specification for
Hazard Communication for Hazardous Chemicals and Dangerous Goods”
Workplace Safety and Health (General Provision) Regulations
Philippines
Date of revision : 2022/05/04 Singapore ENGLISH Version : 1.02 9/11
 QUARTZ INEO MC3 5W-30
SDS # : 082906

National regulations
This Safety Data Sheet (SDS) has been prepared according to EMB Memorandum Circular on “Guidance Manual for
Department Administrative Order 2015-09, Rules and Procedures for the Implementation of GHS in Preparation of
SDS and Labelling Requirements of Toxic Chemical Substances”
International regulations
Chemical Weapon Convention List Schedules I, II & III Chemicals
Not listed.

Montreal Protocol
Not listed.
Stockholm Convention on Persistent Organic Pollutants
Not listed.
Rotterdam Convention on Prior Informed Consent (PIC)
Not listed.
UNECE Aarhus Protocol on POPs and Heavy Metals
Not listed.
Inventory list
Australia inventory (AIIC) : All components are listed, exempted, or notified.
Canada inventory (DSL/NDSL) : All components are listed or exempted.
China inventory (IECSC) : All components are listed, exempted, or notified.
Europe inventory (EINECS/ELINCS/NLP) : All components are listed or exempted.
Japan inventory : Japan inventory (CSCL): All components are listed or
exempted.
Japan inventory (ISHL): Not determined.
New Zealand Inventory of Chemicals (NZIoC) : All components are listed, exempted, or notified.
Philippines inventory (PICCS) : All components are listed, exempted, or notified.
Korea inventory (KECI) : Not determined.
Taiwan Chemical Substances Inventory (TCSI) : All components are listed, exempted, or notified.
Thailand inventory : Not determined.
Turkey inventory : Not determined.
United States inventory (TSCA 8b) : All components are listed or exempted.
Vietnam inventory : Not determined.
The information stated in this section relates solely to the conformity of the chemical product with the
countries Inventories. The information used to confirm the inventory status of this product may be based on
additional data to the chemical composition shown in Section 3. Other regulations may apply for importation
or marketing authorizations.

Section 16. Other information

History
Date of revision : 2022/05/04
Date of previous revision : 2022/05/04
Version : 1.02

Date of revision : 2022/05/04 Singapore ENGLISH Version : 1.02 10/11

 QUARTZ INEO MC3 5W-30
SDS # : 082906

Key to abbreviations : ATE = Acute Toxicity Estimate

BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships,
1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)
N/A = Not available
SGG = Segregation Group
UN = United Nations
Procedure used to derive the classification
Classification Justification
Not classified.

Additional details on the supplier of the product

Total (Philippines) Corporation
7th Floor, 11th Corporate Center
11th Avenue, corner Triangle Drive,
North Bonifacio, Bonifacio Global City
1634 Taguig City
Philippines
Tel : +63 2 88490888
Fax : +63 2 88490889

References : Not available.

Indicates information that has changed from previously issued version.
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-
named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or
completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may
present unknown hazards and should be used with caution. Although certain hazards are described herein,
we cannot guarantee that these are the only hazards that exist.

Date of revision : 2022/05/04 Singapore ENGLISH Version : 1.02 11/11